Astro X3 allow up to 2 concurrent streams at the same time, shared across your registered devices. If you’d like to enjoy more simultaneous viewing, you can add GO+ to increase to up to 4 concurrent streams for RM5.99 per month (exclusive of SST). While streaming is flexible across devices, only one Smart TV can be used at a time. The remaining streams can be used on mobile or other supported devices via Astro GO.

No, you are still able to subscribe to iQIYI on your current Astro pack.

Yes, you can activate your access anytime between April 24, 2025, and June 23, 2025, to get 2 months of access to Prime Video at no additional charge. Please note that the offer is subject to change. All sign-ups are also subject to the Prime Video app usage terms and conditions.

Please ensure that your Ultra or Ulti Box is set as the primary (main) decoder to enjoy 2 months of access to Prime Video at no additional charge.

If your primary box is an older model, don’t worry as you can still enjoy this offer by upgrading to an Ultra/Ulti Box within the offer period. Just contact us to arrange your upgrade.

If you experience constant loading or buffering while watching content on the Astro Smart TV app, please follow the steps below:

1. Update Your Smart TV Software

• Ensure your Smart TV is running the latest software or firmware version.
• Check for updates in your TV's Settings menu and install any available updates.

2. Restart Your Devices

• Turn off and restart the following devices:
  • Router
  • Modem (if applicable)
  • Smart TV
• Wait a few minutes for all devices to reconnect and stabilize.
• Relaunch the Astro app and test the VOD content again.

3. Clear the Astro App Cache

• Clear the application cache on your Smart TV.
• After clearing the cache, reopen the Astro app and check if the buffering issue has been resolved.

4. Reinstall the Astro App

• Uninstall the Astro app from your Smart TV.
• Download and install the latest version from your TV's app store.
• Launch the app and test any content again.

5. Still Experiencing Buffering Issues?

• Check whether other devices on the same network are heavily using the internet.
• Use a LAN cable for a more stable connection if possible.

If you are still having issues, proceed to submit report via WhatsApp or Feedback Form and provide:

• Astro ID use
• Smart TV model
• OS version
• Type of internet connection (Wi‑Fi or LAN)
• Screenshot/photo of the error message

This will help our support team investigate and assist you further.

Band Steering is a functionality that our WiFi router (Huawei K562E) has that intelligently connects devices to its WiFi to the best frequency bands available based on usage, speed and coverage by using only one same SSID for both 2.4GHz and 5GHz band.

Any packages with Entertainment Plus, Movies Plus & Sports Plus will include Netflix. The default Netflix offering is Netflix Standard (2 screens and HD viewing) as part of your Entertainment Plus, Movies Plus and Sports Plus subscription. You can upgrade up to Netflix Premium (4 screens and 4K UHD viewing) at a price of RM 10 (inclusive of govt. tax).

Note: For the above subscriptions, you may use the email address used for your existing subscription with Netflix to activate and the future billing for Netflix will be transferred to your Astro bundle charges. For users that are billed for Netflix through Apple before joining the Astro bundle, remember to cancel your Apple billing arrangement after activating the Astro bundle else you may be double charged for your Netflix account.

If you do not have a bundle which includes Netflix, you may also add a new Netflix subscription to your Astro Bill for billing convenience.

Your two-months Prime Video access begins on the day you activate your account.

The Malaysia Communication and Multimedia Commission (MCMC)has issued a directive to all telecommunication companies (telcos) to block the sending and receiving of SMS with URL links. The move is aimed at preventing users from becoming victims of online scams. This exercise is applicable for all person-to-person SMS with URL links sent to or received from local and international mobile numbers, which has already taken effect as of 2 May 2023.

For self-installation, in your first bill upon activation of your Plug& Play Box, the activation fee will be included as a separate line item in your bill alongside the subscription fee.

If you choose to install the Plug & Play Box via installer, you can pay the installation fee and activation fee directly to the installer upon installation. This will be reflected in your next bill itemised as setup fee.

Sun NXT app allows you to create a separate kids profile for children below the age of 12. Once you log into the kids’ profile, you will be required to enter a password before you can switch back to the adult profile. All content specific to children will be tagged as 'Kids Content' and only such restricted content will be accessible through the kids’ profile.

Please ensure that your mobile number is up to date in our database to ensure that payment reminders are sent to the right person.

You can do so via:

1. Astro Self-Service Portal

2. Call our Customer Call Centre (CCC)

**Only account holder can update the mobile number

Starting 20 January 2026, all Astro customers will have the option to add on the TVBAnywhere+ app to their existing subscriptions.

Viu Premium members can enjoy ad-free viewing, unlimited downloads for offline viewing, full
HD resolution and priority/exclusive access to content!
As a Viu Premium member, you will be able to enjoy the benefits below:
a. Premium Shows
b. Ad-free viewing
c. Unlimited Downloads
d. Malay Subtitles
e. Watch On TV
f. HD Streaming
g. Exclusive Viu Originals
h. Cast videos from mobile device to TV

We would highly recommend for you to pre-pack your Astro Box equipment before taking it to our courier partner branch. However, if you unable to pre-pack the Astro Box, you can bring the equipment to the nearest courier partner branch for assistance.

You would need your 10-digit account number and your email address.

For technical visit, the current fees will remain unchanged i.e.: 8% Service Tax absorbed by Astro. As for installation fees, current fees will remain unchanged i.e.: 6% Service Tax has already been included in installation fees, as 2% will be absorbed by Astro.

Check out our user guide for a quick and easy way to get started!

Download our user guide in English

Download our user guide in Malay

Download our user guide in Chinese

Do you need more information? Watch our Astro Ultra How to videos here.

By changing from a higher contract duration e.g., 24-months commitment period to lower contract duration e.g., 12-months, a proration of the cancellation fee will be applicable whereby you will be charged per contract's month balance against the maximum cancellation fee agreed upon during sign up for the offer.

A proration of the cancellation fee will be applicable whereby you will be charged per contract's month balance against the maximum cancellation fee agreed upon during sign up for the offer.

You will start a new contract with 12-months commitment and receive the corresponding discount for that duration.

Check out how a cancellation fee is calculated with examples via this link:

The new packs will be available starting 9 December 2024 and you can subscribe via:

• The Astro website: www.astro.com.my

• WhatsApp at 03-9543 3838 and type GET ASTRO

• Astro Customer Service Centres

Please disregard the reminder if payment had been made and do check if you have any outstanding balance on Astro Quick Pay.

Yes, you can download selected content on the iQIYI app for offline viewing at a later time. To find the titles you have downloaded, you may go to Profile > My Downloads.

If band steering is enabled, you do not need to worry about which frequency band that your devices are connected to because the WiFi router will make the assessment and direct each device to appropriate frequency band.

However, it is important to note that quality and signal strength are not guaranteed due to unpredictability given that it is completely up to the connected devices and the WiFi router to intelligently decide on which band to connect.

You can access your Viu Premium account on up to five (5) devices at a time. To ensure a
smoother streaming experience, please sign out from any unused devices.

If you see this message, it means the maximum number of devices currently streaming on your Astro account has been exceeded.
Please perform the following checks and troubleshooting steps:

1. Stop Streaming on Other Devices

• Check if Astro is currently being streamed on other devices linked to your account.
• Close the Astro app or stop playback on any unused devices.

2. Wait a Few Minutes

• If a streaming session was recently ended, it may take a few minutes for the system to update.

3. Try Again

• Return to your device and attempt to stream the content again.

4. Check Your Device Usage

• Go to www.astrogo.com.my or open the Astro GO app.
• Log in using your Astro ID and password.
• Review the list of registered devices.
• Remove a device that you no longer use.
• Return to your new device and try signing in again

If you are unable to remove a device or continue to see the error message, proceed to submit report via WhatsApp or Feedback Form and provide:

• Astro ID use
• Smart TV model
• OS version
• Error reported on device

This will help our support team investigate and assist you further.

Note: Please be aware that only one Smart TV device is allowed per account at any point in time.

Slow browsing using LAN cable

Looks like there is something wrong with your service connection.

Please run the Speed Test and attach the picture or screenshot of the speed test in the Feedback Form below, in order for us to provide further assistances.

Click here for Speed Test guideline.


Slow browsing using LAN cable

Looks like there is something wrong with your service connection.

Please run the Speed Test and attach the picture or screenshot of the speed test in the Feedback Form below, in order for us to provide further assistances.

Click here for Speed Test guideline.

Quick Info
A Speedtest is a service that provides free analysis of Internet access parameters, such as connection data rate.

Slow browsing using Wi-Fi

1. Router Positioning

Most people underestimate the importance of picking a good spot for a Wi-Fi router. Even a small shift in positioning could end up being the difference between day and night.

i) High vs. Low

Put the router as high up as possible to extend the broadcasting range of the radio waves. This also helps clear the router of possible interferences.

ii) Concrete & Metals

Make sure your router isn't blocked by any other objects, especially devices that are electronic. Also, avoid placing your router in your basement as this area is usually enclosed by a lot of concrete, which can be almost impossible for Wi-Fi signals to penetrate.

iii) Distance to Router

The further away from your router you get, the weaker the Wi-Fi signal. Therefore, the best option is to place your router as close to your devices as possible, but this is only practical if you have one main area where you tend to use your devices.

Otherwise, you should place your router near the center of your home. After all, Wi-Fi broadcasts in 360 degrees, so it doesn't make sense to put it at one end of the house.

2. Wireless Interference & Noise

You've probably never noticed but there are wireless signals all around you wherever you go and they're passing through you all the time. From where? Electronic devices, Wi-Fi routers, satellites, cell towers, and more.

Although Wi-Fi is supposed to be on a different frequency than most of these devices, the amount of radio noise can still cause interference. Some common causes of interference include:

• Microwaves
• Bluetooth Devices
• Cordless Phone

3. Surrounding Wi-Fi signals

A truth of the modern world is that every household has their own Wi-Fi network, which can cause issues with channel overlap. This can be somewhat problematic in a townhouse, but is especially problematic in housing complexes and apartments where there can be many routers within close proximity.

Which is why it's important that you pick a good channel in your router settings. Modern routers can choose channels for you automatically, but sometimes it's better to investigate and find the best channel yourself.

4. Usage

More likely, however, is that the people on your network such as friends, roommates, or family members are participating in bandwidth-heavy activities like gaming and streaming Ultra box/ Netflix.

Fortunately, if this is the case, you can prioritize your own network traffic by enabling Quality of Service in your router settings.

If the problem persists, please run a Ping Test, Traceroute Test and attach the picture or screenshot of both test results in the Feedback Form below, in order for us to provide further assistances.

Please make sure to attach the required screenshot(s) in ONE file (i.e. Microsoft Word document, PDF, Image file) before submitting the form.

Quick Info
A Speedtest is a service that provides free analysis of Internet access parameters, such as connection data rate.
A Ping Test shows how long it takes for packets to reach host.
A Traceroute Test traces the route of packets to destination host from our server.

Yes, the 6% Service Tax applies to add-on Astro services effective bill date 9^th July 2024 onwards.

• Yes, you are allowed to cancel the termination request within the schedule date by calling Astro.
• For terminated Regular (DTH) account and still holding the equipment, please contact Astro for further action.
• For terminated account with Broadband, we’re unable to re-instate your service. A new application is required.

No additional fees will be charged upon your relocation. However, you are required to notify Astro of your move. Please refer to Astro's General T&Cs for more information.

If you see the error message "There is No Internet Connection" while using the Astro app on your Smart TV, please follow these troubleshooting steps:

1. Check Your Internet Connection

• Confirm whether your Smart TV is connected to the internet via Wi-Fi or a LAN (Ethernet) cable.

2. Check the LAN Cable Connection (if using Ethernet)

• Ensure the LAN cable is securely connected from the router's LAN port to the TV's LAN port.
• Verify that the LED indicator lights on both the router and TV network port are active.

3. Test the LAN Cable

• Connect the same LAN cable to another device (for example, a laptop or another Smart TV).
• Check whether the device can access the internet to confirm the cable is functioning properly.

4. Reconnect to Wi-Fi (if using Wi-Fi)

• Go to your TV's network settings.
• Select your home Wi-Fi network and choose Forget Network.
• Reconnect to the Wi-Fi network by entering the password again.

5. Check Other Devices

• Verify that other devices in your home (such as smartphones, tablets, or laptops) can connect to the same Wi-Fi network.
• If all devices are unable to connect, the issue may be with your internet service.

6. Restart Your Devices

• Turn off and restart the following devices:

• Router
• Modem (if applicable)
• Smart TV

• Wait a few minutes for the internet connection to stabilize.
• Launch the Astro app again and test the playback.

If you are still having issues, proceed to submit report via WhatsApp or Feedback Form and provide:

• Astro ID use
• Smart TV model
• OS version
• Error reported on device

This will help our support team investigate and assist you further.

For customers with Entertainment Plus, Movies Plus, Sports Plus, Premium 2, Premium 3, and Platinum Pack

1. Launch Netflix from the home screen or via remote control.

1. Click on Get Started

1. If you are an existing Netflix customer, please fill in the email address and password associated with your Netflix account. Once successfully completed, all existing settings and watching history on your Netflix account will be brought over. If you are a new Netflix customer, create a new account by filling in your email address and a password for your new Netflix account.

1. In the next screen, you will be shown your default Netflix package “Standard”, you can choose to upgrade to “Premium” here.

1. The final screen provides a summary of your account including your email. Click Start Watching to enjoy Netflix on your Ultra/Ulti Box.

For Non-Entertainment Plus, Premium 2, Premium 3, and Platinum Pack Pack customers (New Netflix customers)

1. Launch Netflix from the home screen or via remote control.

1. Click on Join Now

1. Create a new account by filling in your email address and a password for your new Netflix account.

1. The final screen provides a summary of your account including your email. Click Start Watching to enjoy Netflix on your Ultra/Ulti Box.

Note: The Netflix plan will be defaulted to Premium, you may select ‘Change Plan’ to choose the ‘Standard’ plan.

For Non-Entertainment Plus Pack, Premium 2, Premium 3, and Platinum Pack customers (Existing Netflix customers)

1. Launch Netflix from the home screen or via remote control

1. Click on Sign-in

1. If you are an existing Netflix customer, please fill in the email address and password associated with your Netflix account.

1. You will be able to start watching Netflix on your Ultra/Ulti Box once you log in.

You can recover your Netflix subscription  here.

To check on your termination status or date, you may:

1) Message us on WhatsApp at 03-9543 3838. Type Termination Status
2) Submit Feedback Form
3) Reach out via Astro Official Digital platform i.e. Facebook or Chat.

Our agent will provide the information you need.

Follow the steps below to access the TVBAnywhere+ app on your Ultra/Ulti box:

• Step 1: On the Home menu, go to the app rail and select TVBAnywhere+. A screen with Pair TVBAnywhere+ TV App and a QR code will appear.
• Step 2: Scan the QR code with your mobile device. This action will open the TVBAnywhere+ login page on your phone.
• Step 3: Click on the Astro logo from the partner picker list and login with your Astro ID.
• Step 4: The TVBAnywhere+ app will now launch. Select the ‘Me’ icon to open your profile.
• Step 5: Choose Pair with TV App on the profile page.
• Step 6: A pairing code will appear on your TV. Enter this code on your mobile device and click OK. The TV screen will refresh, and the TVBAnywhere+ homepage will appear.

Starting Thursday, November 14, 10 AM, Netflix will increase the prices for Netflix subscriptions across all plans (Basic, Standard, and Premium) in Malaysia. For Astro subscription packs that are bundled with Netflix, the price change will only take effect on 1 March 2025.

If you subscribe to Netflix through Astro, please note the following changes:

1. New Netflix add-on sign-ups: The new prices will take effect immediately.
2. Existing Netflix add-on customers who subscribed before November 14, 2024: The price change will take effect for billing cycles starting on or after November 21, 2024.
3. Astro subscription packs that are bundled with Netflix: The price change will only take effect on March 1, 2025.

No, there is no additional charges applicable.

No, Astro will cover all expenses related to returning the box.

If the bill has been paid, there will not be any additional service tax charge. However, if the bill has been issued by Astro but has not been paid, then the 8% Service Tax will be reflected in the next bill with adjustments on the new tax rate for services rendered from 1st March onwards.

Example:
Bills issued on 15th February will be charged the 6% SST. Customers will see proration for 8% from 1st – 14th March in the next bill issued on 15th March 2024. If you have fully paid your February bill before 1st March, the Service Tax will remains at 6%. You will be able to see the adjustment reflected in your next bill.

You may register up to four (5) devices.

To remove devices on Astro GO, click on Settings > Registered Devices to view and remove a device(s) from the list of devices registered to your Astro ID.

Your Astro GO email will be delivered to you within an hour upon checkout. Please click the link provided to set up your password and download the Astro GO app on your device by clicking here (Google Play Store) or here (iOS App Store). If you want to stream it directly via your computer or laptop, Astro GO is also available at astrogo.astro.com.my. Log in with your Astro ID and start streaming!

For any transaction, you will be prompted with a push notification alert to replace SMS OTP. Tap on the push notification to view the secure verification screen, that allows you to "Approve" or "Reject" the transaction within 50 seconds. Rejected transactions will not be processed. If transaction is performed from a different device, the push notification alert will still be sent to your SecureGo registered device for approval.

Existing Netflix add-on customers will be notified prior to their next bill cycle via email.