SecureGo: A transaction authentication alert that is sent to your registered device. With SecureGo, you can either approve or reject the transaction in a matter of seconds. 

WhatsApp OTP: OTP stands for One Time Password which is a 6-digit number that is sent to your mobile number via WhatsApp for verification purposes 

Please check your internet speed and connection status via an internet connection test (https://www.speedtest.net/). If your internet is working fine and the issue persists, please try uninstalling and reinstalling the app on your device.

No there will not be any penalty.

For the Multiroom subscription on a box setup, if your subscription is within the 24-month contractual period. Then a pro-rated penalty of RM600 will be applied for any Astro box except for Ultra Box, which the penalty will be RM1,000.

STEP 1

On your remote, press the HOME button.

STEP 2

Navigate to Update Satellite Frequency and press “OK”.

STEP 3

Choose Test Satellite Frequency and press “OK”.

STEP 4

Select Yes, continue and press "OK" to start the test.

Otherwise, select No, go back to cancel.

STEP 5

Satellite Frequency Test progress screen will be displayed.

STEP 6

The test result will be displayed once completed.

Press "OK" to go back to channel.

Please provide your primary mobile number via My Astro Portal, or send it to one of our platforms found here.

Note:

• Any changes of contact details to be requested by account holder only.
• Only account holder's contact to be updated as primary mobile number in the system.

For customers with the Ultra or Ulti Box, please ensure to provide your latest contact details to our Astro agent during the call to terminate your account, this includes your mobile number and house address. If you still need further help, please contact us at 03-9543 3838.

Please see the table below for the offers available for residential customers.

Notes:

· Installation fee includes Government tax.

· Monthly subscription fee does not include Government tax.

· The Ulti Box offers in the table above include a contract Period of 24 months with a pro-rated early termination fee of RM600 (excluding Government tax).

· The installation fees listed in the table above applies for a standard installation of the Ulti Box in your home. Additional charges may apply for non-standard installation.

· * Existing customers with monthly pack >RM100 are recommended to select Ultra Box @ FREE Installation fee with 24 months contract.

· ** New customers with monthly pack >RM100 are recommended to select Ultra box @ RM99 installation fee with 24 months contract.

· You may visit https://product.astro.com.my/box to find out more details about Astro Ultra Box.

· Ulti Box installation is free for Astro & Broadband customers for Starter Pack and above. A separate list of TNC’s will be applicable for this offer.

1. Open/Download the My Astro app or visit My Astro web.

2. Login with your Astro ID.

3. Go to Account.

4. Select 'Profile'.

5. Under Addresses, tap on the edit icon.

6. Select 'Approve' to update service address.

7. Select the Residential type and key-in the postcode, Tap 'Check'.

8. Key-in the Street, House number and Area.

9. Select 'No, I'm all set' and tap 'Proceed'.

10. Tap ' Confirm'.

11. A successful notification will be displayed.

If your submission was unsuccessful, you can reapply through the My Astro website or app. We strongly advise you to provide your TIN number to facilitate the e-invoice issuance process. Alternatively, you can reach out to us via Astro Help & Support for assistance.

To purchase Astro First easily, you can do it through My Astro. Here's how:

1. Download the My Astro app or visit My Astro web
2. Login using your Astro ID
3. Go to Astro Store > Astro First section
4. Select your preferred movie and click on rent
5. When your rental is confirmed, you will see details on which channel that you can watch your movie

Purchase via WhatsApp

1. Go to channel 480
2. Whatsapp the “movie code” to 03-9543 3838
3. Enter your “smart card number” (this is available on the top right corner of your tv screen)
4. Type “1” to confirm
5. The reply will direct you to the entitlement channel accordingly

Purchase via SMS

1. Go to channel 480
2. SMS the “movie code” to 32999
3. The SMS confirmation reply will direct you to the entitlement channel accordingly

*SMS service is available for Maxis, Celcom, Digi and U Mobile only.

From Beyond PVR On Demand interface:

1. Press the “Home” button on the Astro remote control
2. Select “On Demand” and press the “OK” button from the Astro remote control
3. Scroll to “Store” and search for the Movies/series
4. Select “Buy” and enter Pin Code.

From Ultra/Ulti On Demand interface:

1. Press the “Home” button on the Astro remote control
2. Scroll to the Store tab
3. Scroll to “Astro First: New Releases” or “Astro First: Blockbusters” and search for the Movies
4. Select “Rent” and enter Pin Code

From Astro Go app (purchases only applicable for Android devices):

1. Download the Astro Go app from the Google Play store.
2. Create an ID and link your account / proceed to log in if you have linked your account
3. Scroll to “Store” and search for “Astro First: New Releases” or “Astro First: Blockbusters”
4. Select “Rent” and enter Pin Code

*The default pin code is 0000 if you have not pre-set it.

🎁 Want to buy Astro First movies faster & track your rentals?

📱 Download the My Astro app to:
- Browse Astro First titles
- Rent in 1 tap
- Get reminders when new movies launch

1. Open/Download the My Astro app or visit My Astro web.

2. Login with your Astro ID.

3. Go to Account.

4. Under Billing, tap on Auto Debit.

5. Select 'Update expiry date'.

6. Key-in the expiry dates, then tap 'Save'.

7. A successful notification will be displayed.

If Netflix is included as part of your Astro pack, you will find it in My Astro app

where you will be able to manage all the streaming apps you are entitled to.

Netflix will also be included in your Astro bill under “Monthly Charges”

If you have added Netflix to your bill (Netflix Add-on), the Netflix subscription charge will appear in your Astro bill under “One-time charges” as Netflix App Subscription or Netflix Premium and will be charged monthly. You should refer to Netflix account Management for any changes to your Netflix subscription or should you wish to change to other billing methods.

Huawei K562e

1. Please connect your computer or laptop to your Astro Fibre router using LAN cable. Your LAN cable must be connected from the yellow port of Astro Fibre router (Any available port).

2. Once connected, open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox and etc.

3. On the address bar, type http://192.168.100.254 and below page will appear.

Login using your username and password if you have changed the router login setting. Otherwise, your default router login is as per below.

Username: user

Password: user

4. Once you have successfully logged in, the router's web-based setup page will appear.

5. At the top of the page, click More to configure the WiFi parameters.

6. From the left menu, select WLAN and choose Wi-FI Advanced Network to access the screen below.

7. To change the channel on 2.4 GHz and 5 GHz, click the drop-down arrow for Channel, then select your desired channel.

8. Then, click "Apply" for the changes to take place.

At this point in time, the Disney+ app on Astro Ultra and Ulti Box does not support Dolby audio. We are working to enable this in a future update.

You will be able to enjoy all the content on WeTV via your Ultra/Ulti Box,

wetv.vip

and the WeTV mobile app immediately upon successful purchase from the Astro website. Please ensure that the mobile number used to log in to the app is the same one used to purchase your WeTV VIP subscription.

Ensure that your push notification is enabled for My Astro app for a smooth transaction authorisation process or follow these steps if you still don't receive the alerts: 

Launch the My Astro app, tap the gear icon on top right of the screen to go to Manage. Under Settings, tap on SecureGo.

Tap on Authorisation and you will be able to see pending transaction details .

All existing or new Astro customers who meet the following criteria may upgrade to the Ultra Box:

1. Have an internet connection at home (recommended>10Mbps speed)
2. Maintain a minimum subscription with a HD + Recording service

If you live in a high-rise building, please call us at 03- 7481 8000 to check if your building can support the Ultra Box. If your high-rise building allows for the set-up of individual dishes you will be able to upgrade to the Ultra Box, subject to the criteria above.

If you would like to access our 4K UHD content via the Astro UHD channel 805 and UHD content on VOD, Astro Best and Astro First. We also recommend:

1. 4K UHD supported TV that is HDCP2.2 compliant
2. Internet connection of at least 30Mbps

Note: If you do not have an internet connection at home, you may take up the Ultra Box bundled with Astro™'s broadband package with rebates of up to RM30/month. For more details and to sign up for Astro & Broadband, please click here.

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Settings.

STEP 3

Navigate to Network Settings and press "OK".

STEP 4

Select Network Diagnostics and press "OK".

STEP 5

Details information of Network Diagnostics screen will be displayed.

STEP 1

Identify your remote control:

a) Remote control with Astro logo at the bottom of the remote, proceed to STEP 2.

b) Remote control with Astro logo at the top of the remote, proceed to STEP 4

STEP 2 (Astro Logo at the bottom of the Remote)

On your remote, press the “set tv” button and set tv instructions will be displayed on top of your screen:

STEP 3

Follow the steps appear on the TV screen to sync your Astro remote and complete the setup.

STEP 4 (Astro Logo atthe top of the Remote)

Press and hold “tv input” key on bottom left of the remote for 3 seconds until the LED blinks twice.

STEP 5

Enter the 2-digit TV Code of your TV Brand and the LED will blink twice:

STEP 6

Try out the TV controls (TV Standby or adjust Volume) to check if they are working correctly.

STEP 7

Press ok and wait for the LED to blink twice to save the settings.

Step 1: User press ‘YELLOW’ button to change mobile number.

Step 2: Scan the QR Code on your Ultra Box/Ulti Box using your mobile phone.

Step 3: Update your mobile number.

Step 4: Click on ‘Mobile number updated’ upon mobile number update completion and continue with OTP validation again.

Step 5: Once the mobile number has been successfully updated, please continue with the activation process.

Astro X3 packs offer a new way to enjoy Astro — without the need for a set-top box or satellite dish, giving you a simpler and more flexible way to watch your favourite content. With no box required, you can start streaming your favourite entertainment shows and live sports instantly via the Astro app on selected Smart TVs and personal devices such as smartphones, tablets, and laptops — anytime, anywhere. And with just a 12-month contract, these plans offer greater flexibility while delivering the same breadth of content you enjoy with Astro.

You can choose from two flexible 12-month options, depending on your viewing preferences:

• Astro X3: Entertainment 12 Pack – for a wide range of entertainment content
• Astro X3: Sports 12 Pack – for live sports and comprehensive coverage

*No-contract options will be available from December 2026.

The Ultra Box is Astro's latest generation of 4K UHD enabled box with Cloud recording feature, redesigned new interface, and UHD resolution. Just connect the all-new Ultra Box to the internet and take control of your entertainment and explore over 100,000 videos that are waiting to be streamed, anytime. With the ability to record as many shows as you want simultaneously.

The new interface on Astro Ultra Box offers an enhanced viewing experience with a brand-new look and feel with features such as:

· New Home Screen - Everything you see is yours

· Discover VOD - Discover 100k videos, stream anytime, anywhere including in 4K UHD

· Search - Search faster and easier

· Play from Start - You missed the start? Just restart

· Stop Here, Continue There - Stop on one screen and continue on another device

· Multi-Screen - Stream seamlessly across any device

· Cloud Recording - Record all the programmes you want at the same time

. **Continuous viewing - Enable to continue watching your favorite shows during raining

Note: ** Except 4K UHD, Astro First and all radio channels

For any unreturned equipment, penalty fee will be charged as below:

• Astro Box – RM100
• Router – RM200 (For Astro Fibre only)
• Mesh – RM200 each (For Astro Fibre only)

No, Astro GO is a free app for Astro customers. The content available on Astro GO will depend on the subscription pack that you are subscribed to.

If you do not have an Astro subscription, please click here to find out packages available.

Please make sure that:

• You are entering the correct account holder's information while linking, ie: I/C number, passport number, Astro account number or Smart card number.
• You are linking to an Astro account (NJOI customers will not be able to log into Astro GO).
• Your Astro account is not currently linked to any other Astro ID. If your Astro account is currently linked to another Astro ID, you will see a red notice.

To find out which Astro ID is currently linked to your account, you may submit a feedback form. Kindly select feedback type "I have an enquiry/issue with Apps"

Yes, we will schedule for the equipment collection after you have discontinued Astro & Broadband services. If equipment is damaged or lost, penalty fee of RM 530 (inclusive of Govt. Tax) will be charged.

If you cancel your subscription before completing the 12-month contract period, an early termination fee may apply in accordance with your contract terms. The fee is calculated by multiplying your monthly subscription fee by the number of months remaining in your contract.

Please refer below to set up your Ultra/Ulti Plug & Play Box.

To connect via LAN cable:

1. Switch off your old Astro box.
2. To connect your Plug& Play Box via LAN cable:
   a) Remove the LAN cable from your old Astro box and connect the LAN cable to your new Plug & Play Box.
   i) For Maxis IPTV customers, keep the other end of the LAN cable connected to your router.
   ii) For TIME IPTV customers, go to the other end of the same LAN cable, plug it out from your modem, and into any LAN port on your router. Ensure that you’re not plugging your LAN cable back into the same box.
   

Note: If you have a two-in-one modem & router, you can skip Step ii).

To connect via Wi-Fi:

Remove your LAN cable from your old Astro box, and do not plug it into your new Plug & Play Box.

1. Open/Download the My Astro app or visit My Astro web.

2. Login with your Astro ID.

3. Go to Account.

4. Select 'Profile'.

5. Under Email, tap on the edit icon.

6. Enter the 6-digit One Time Pin and tap 'Verify'.

7. Select 'Approve' to update email address.

8. Enter the new email and tap 'Save'.

9. A successful notification will be displayed.

Once the e-invoicing is activated, you cannot change your bill delivery method. If you do, your e-invoice will be automatically deactivated.

To request for a move, you may choose to:

(The fastest way) Self-serve by logging in to My Astro and follow the steps below:

1. Download the My Astro app or use the web version of My Astro
2. Login using your Astro ID
3. Go to Account > Profile > Address
4. Tap on the edit icon on 'Service address'
5. Verify your identity via SecureGo or OTP
6. Fill in your new address and confirm your relocation
7. A support ticket will be created and we will be in touch

OR

Submit your feedback via below link: https://support.astro.com.my/feedback-form

1: Choose Feedback Type

• Type: Technical issues
• Issue: I want to enquire about installation/ relocation

2: Fill in the form and click “Submit” support ticket.

For Astro Ultra Box or Ulti Boxes, you will be able to see an itemised charge called "Box Fee” in your Astro bill.

To access these streaming apps, you would need to upgrade to the Ultra or Ulti Box by visiting product.astro.com.my/box. Alternatively, you may also reachus via WhatsApp by typing "Hi

For more information you may visit

https://www.hasil.gov.my/en/e-invoice/

OR call the IRBM help desk line at 03-8682 8000 OR email them at [email protected]

[email protected]

.

The main features and changes in this update are the revamped look and feel of Astro's user interface on the Astro Ultra/Ulti Boxes and Astro GO, which include redesigns to the Astro interface that consists of title rows at the Home Page to feature popular franchises, new live programmes posters and changes to the menu bar for easier navigation; auto-start Interactive Mode on Astro GO; as well as a Picture-in-Picture mode that shrinks your video player so you can keep watching your favourite shows while using other apps.

The details of each feature are:

• New Astro user interface
• Picture-in-picture mode
• Auto-start Interactive Mode on Astro GO

For more info, please read our dedicated FAQ on this here.

There are few ways to get for your refund.
Click here for details:

1. Please standby computer/laptop to access to the internet and connection must be via LAN (cable) [Connect the LAN (cable) to the yellow port in Maxis Router and direct to computer/laptop].

2. You may open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox and etc.

3. On the address bar, please go to http://192.168.1.254 and below page will appear.

If below box appear, please enter required details as below:

USERNAME: Administrator

PASSWORD: (ACCESS KEY AT THE RGW STICKER)

(These are the defaults, if you have done previous configuration on your router the password may be different)

4. Once enter into the page ‘’TECHNICOLOR TG784N V3’’, you may follow below step for the wireless information.

i. Click "Configure”

ii. Once clicked configure button, below screen will appear.

A. This is your current password. Please delete and enter the new password.

B. Once completed the selection; click the "Apply" button. Router will auto reboot and connection re-establish after few minutes.

Please re-connect your wireless using the new password.

Yes, you can activate your access anytime between April 24, 2025, and June 23, 2025, to get 2 months of access to Prime Video at no additional charge. Please note that the offer is subject to change. All sign-ups are also subject to the Prime Video app usage terms and conditions.

Please ensure that your Ultra or Ulti Box is set as the primary (main) decoder to enjoy 2 months of access to Prime Video at no additional charge.

If your primary box is an older model, don’t worry as you can still enjoy this offer by upgrading to an Ultra/Ulti Box within the offer period. Just contact us to arrange your upgrade.

For customers with Entertainment Plus, Movies Plus, Sports Plus, Premium 2, Premium 3, and Platinum Pack

1. Launch Netflix from the home screen or via remote control.

1. Click on Get Started

1. If you are an existing Netflix customer, please fill in the email address and password associated with your Netflix account. Once successfully completed, all existing settings and watching history on your Netflix account will be brought over. If you are a new Netflix customer, create a new account by filling in your email address and a password for your new Netflix account.

1. In the next screen, you will be shown your default Netflix package “Standard”, you can choose to upgrade to “Premium” here.

1. The final screen provides a summary of your account including your email. Click Start Watching to enjoy Netflix on your Ultra/Ulti Box.

For Non-Entertainment Plus, Premium 2, Premium 3, and Platinum Pack Pack customers (New Netflix customers)

1. Launch Netflix from the home screen or via remote control.

1. Click on Join Now

1. Create a new account by filling in your email address and a password for your new Netflix account.

1. The final screen provides a summary of your account including your email. Click Start Watching to enjoy Netflix on your Ultra/Ulti Box.

Note: The Netflix plan will be defaulted to Premium, you may select ‘Change Plan’ to choose the ‘Standard’ plan.

For Non-Entertainment Plus Pack, Premium 2, Premium 3, and Platinum Pack customers (Existing Netflix customers)

1. Launch Netflix from the home screen or via remote control

1. Click on Sign-in

1. If you are an existing Netflix customer, please fill in the email address and password associated with your Netflix account.

1. You will be able to start watching Netflix on your Ultra/Ulti Box once you log in.

Yes, all PPV purchases are subjected to a 8% Service Tax beginning 1st March 2024. Additionally, note that the prices displayed are excluding Service Tax.

Sun NXT app allows you to create a separate kids profile for children below the age of 12. Once you log into the kids’ profile, you will be required to enter a password before you can switch back to the adult profile. All content specific to children will be tagged as 'Kids Content' and only such restricted content will be accessible through the kids’ profile.

STEP 1
In the Kids Profile, press the Home button on your remote and the home menu will be displayed.

STEP 2
Navigate to Profile.

STEP 3
The Profile Selection Screen will be displayed.

STEP 4
Choose an Adult Profile.

STEP 5
Switching from a Kids to an Adult Profile will require you to enter a 4-digit PIN.
Please enter your PIN to proceed. If you have not set up your PIN, the default code is 0000.

STEP 6
After entering the PIN, you will be able to enter the Adult Profile.

Please rest assured that streamingapps labelled with "coming soon"

will be available on Astro in the near future.Please visit product.astro.com.my/appsfor more information on the streaming apps available on Astro or follow oursocial media to get notified on latest launches.

Facebook: @Astro
Instagram: @astromalaysia
Twitter: @astroonline

Kindly take note that streaming apps labelled with “coming soon” will be made available on Astro once they areready. Astro reserves the right to delay or cancel streaming app launches, ifnecessary.

Yes, users can access the Simply South app from anywhere in the world, except for India.

Please make sure that:

1. You are logging in with the correct registered Astro ID (email or phone number) and password. If you can’t remember your password, please proceed to use the “forget password” function.
2. You have an Astro ID that is linked to an Astro account. (note: NJOI – linked users will not be able to log into Astro GO)
3. Your Astro account is active and not under suspension.

If the above points have been met, you may try some quick solutions below:

1. Clear the cache on your browser or app.
2. Check if you have the latest version of the browser or app.
3. Log out and log back into the browser or app.
4. Relaunch the browser or app.
5. Restart your mobile device.
6. Restart your internet connection.

1. Unifi netis brand

The following shows an Interface based on Unifi router

1. Launch Web Browser and enter the default's gateway's IP address (192.168.1.1) in the address bar.

1. Enter Username and Password.
   1. Username = tmadmin
   2. Password = Adm@xxxx (xxxx refers to last four digits of MAC address)

1. Choose WLAN -> wlan0 (2.4GHz) Basic Setting. Note down on SSID.

1. Choose WLAN -> wlan1 (5GHz). Compare SSID with previous SSID.

1. If SSID for wlan0 (2.4GHz) and wlan1 (5GHz) are the same. Change wlan1 (5GHz) SSID by adding number 5(i.e. ifuni_5G) to differentiate from 2.4 GHz. Click Apply Changes.

Note: Connection to Wi-Fi may be temporarily loss while the changes is updated.

The new Astro First (channel 480) serves as the one-stop, ultimate home cinema offering the biggest and latest local and international blockbuster films where you can:-

• Enjoy value for money viewing for local and international movies from only RM15* per movie (*excluding tax).

• Watch each movie for up to 12 different times over 48 hours* at your convenience (*unless stated otherwise).

• Watch local/regional movies or international movies from Hollywood studios as recent as 2 weeks or 3 months respectively from Malaysia’s cinematic release, in addition to exclusive titles only available on Astro First.

After completing the subscription process, you will be able to access the iQIYI App on the Ultra/Ulti Box by following the steps below:

On your Ultra/Ulti Box
Step 1: At the Home menu, go to the App Rail and select "iQIYI"
Step 2: Click "OK" on your Astro remote
Step 3: While on the iQIYI App Home Page, navigate to "VIP account" located at the top left pane and click "Login". A page with a QR Code will be presented on your TV screen
Step 4: Scan the QR code using your mobile device and you will be directed to the iQIYI mobile app
Step 5: Follow the steps under "On Mobile App" below to pair your iQIYI account with your Ultra/Ulti Box

On the iQIYI Mobile App
Step 1: Download the iQIYI App on your mobile device
Step 2: At the login page, select "Continue with Astro"
Step 3: Log in with your Astro ID
Step 4: Click on the "Me" icon located at the bottom of the screen, and you will be presented with your iQIYI profile page
Step 5: Click on the in-app QR code scanner located at the top right corner of the screen
Step 6: Scan the QR Code displayed on your TV screen with the in-app QR code scanner. Refer to Step 3 under "On your Ultra/Ulti Box" above
Step 7: The screen on your TV will reload automatically and the iQIYI App home screen will be displayed. Now, you can enjoy the iQIYI App on your Ultra/Ulti Box!

Once you have received the eKYC link via SMS/email/astro.com.my, you can proceed to follow the instructions on the screen. You can check out the step-by-step image below for more info.

For MyKad/MyPR/MyTentera :

For Passport :

If an error message on your TV has one of the following keywords:
- Channels are temporarily unavailable due to bad weather.
- Service Currently Not Available
- SCNA
- (Code: SCNA)

You can proceed with below troubleshooting if the weather is good. Otherwise, you may try again later.

STEP 1: Check Weather Conditions

If the weather is bad, wait until it clears before proceeding.

STEP 2: Access STB Diagnostics

2a. Press the Home button on your Astro remote.

2b. Navigate to Settings and press OK.

2c. Navigate to STB Diagnostics and press OK.

STEP 3: Check Signal Strength

Refer to the signal strength % shown on the top left of your screen.

If it is 65% or higher, please take the screenshot and submit your Feedback Form.

If it is below 65%, please go to Step 5.

STEP 4: Power Off the Box

Switch off the power for your box and make sure that the adapter’s power light is off.

STEP 5: Reconnect Satellite Cable

Unscrew the satellite cable from the box and pull it out.

Plug the satellite cable back into the box and screw it back securely.

STEP 6: Power On the Box

Switch on the power for your box and make sure that the adapter’s power light is on.

Please wait for 5 minutes.

STEP 7: Contact Astro Support

If issue persist, please submit the issue on our Feedback Form and attach a picture of your General tab of the STB Diagnostics for assistance or chat with us via WhatsApp at 03-9543 3838.

Centralised Dish

If your Astro Box is connected to your apartment or condo building's centralised dish and the issue persists, please contact your respective Building Management before reaching out to our agents.