No. Disney+ is not available on Astro Smart TV or Astro GO apps.

You can access Disney+ via:

a. Astro Ultra and Ulti Box by clicking on the Disney+ app under the Apps rail on your Home page.

b. Personal devices (e.g. mobile phones, tablets and Smart TVs) by downloading the Disney+ app or visiting the Disney+ website.

Refund can only be made by the registered Astro account holders.

However, if you would like to request refunds on behalf of the account holder, you may do so by providing the supporting documents (e.g.: authorization letter, death certificate, 3rd party NRIC copy).

Slow browsing using LAN cable

Looks like there is something wrong with your service connection.

Please run the Speed Test and attach the picture or screenshot of the speed test in the Feedback Form below, in order for us to provide further assistances.

Click here for Speed Test guideline.


Slow browsing using LAN cable

Looks like there is something wrong with your service connection.

Please run the Speed Test and attach the picture or screenshot of the speed test in the Feedback Form below, in order for us to provide further assistances.

Click here for Speed Test guideline.

Quick Info
A Speedtest is a service that provides free analysis of Internet access parameters, such as connection data rate.

Slow browsing using Wi-Fi

1. Router Positioning

Most people underestimate the importance of picking a good spot for a Wi-Fi router. Even a small shift in positioning could end up being the difference between day and night.

i) High vs. Low

Put the router as high up as possible to extend the broadcasting range of the radio waves. This also helps clear the router of possible interferences.

ii) Concrete & Metals

Make sure your router isn't blocked by any other objects, especially devices that are electronic. Also, avoid placing your router in your basement as this area is usually enclosed by a lot of concrete, which can be almost impossible for Wi-Fi signals to penetrate.

iii) Distance to Router

The further away from your router you get, the weaker the Wi-Fi signal. Therefore, the best option is to place your router as close to your devices as possible, but this is only practical if you have one main area where you tend to use your devices.

Otherwise, you should place your router near the center of your home. After all, Wi-Fi broadcasts in 360 degrees, so it doesn't make sense to put it at one end of the house.

2. Wireless Interference & Noise

You've probably never noticed but there are wireless signals all around you wherever you go and they're passing through you all the time. From where? Electronic devices, Wi-Fi routers, satellites, cell towers, and more.

Although Wi-Fi is supposed to be on a different frequency than most of these devices, the amount of radio noise can still cause interference. Some common causes of interference include:

• Microwaves
• Bluetooth Devices
• Cordless Phone

3. Surrounding Wi-Fi signals

A truth of the modern world is that every household has their own Wi-Fi network, which can cause issues with channel overlap. This can be somewhat problematic in a townhouse, but is especially problematic in housing complexes and apartments where there can be many routers within close proximity.

Which is why it's important that you pick a good channel in your router settings. Modern routers can choose channels for you automatically, but sometimes it's better to investigate and find the best channel yourself.

4. Usage

More likely, however, is that the people on your network such as friends, roommates, or family members are participating in bandwidth-heavy activities like gaming and streaming Ultra box/ Netflix.

Fortunately, if this is the case, you can prioritize your own network traffic by enabling Quality of Service in your router settings.

If the problem persists, please run a Ping Test, Traceroute Test and attach the picture or screenshot of both test results in the Feedback Form below, in order for us to provide further assistances.

Please make sure to attach the required screenshot(s) in ONE file (i.e. Microsoft Word document, PDF, Image file) before submitting the form.

Quick Info
A Speedtest is a service that provides free analysis of Internet access parameters, such as connection data rate.
A Ping Test shows how long it takes for packets to reach host.
A Traceroute Test traces the route of packets to destination host from our server.

Service Tax is charged based on the date the service is rendered. For services rendered on or after 1st March 2024, the Service Tax rate would be at 8% whilst for services enjoyed before 1st March 2024, the Service Tax rate would be 6%.

There will be no penalty fee if you choose to cancel your iQIYI VIP subscription. Your cancellation will take effect upon your current entitlement expiry date. Kindly note that if you cancel your subscription within 24 hours before your entitlement expiry date as reflected in the iQIYI app (not according to Astro billing cycle), your subscription may be auto renewed.

No, Astro & Broadband only offers a 24-month contract period upon sign up.

Netflix changes their prices and plans from time to time to reflect the improvements that they make to the service. They continue to invest heavily in great new shows and films, to deliver great value for money.

Step 1: You request for a move - here's how.

Step 2: One of our agents will contact you within 24 hours to set an appointment if you’re using My Astro app.

Step 3: You will receive a reminder of your appointment an hour before your scheduled time.

Step 4: The technician will dismantle your satellite dish.

If there is no satellite dish, customers should dismantle the modem, router, and decoder by themselves.

Step 5: You will need to transport your device(s) to your new home.

Step 6: The technician will reinstall your satellite dish, (including modems and routers for broadband customers) at your new home based on the schedule appointment.

Note For IPTV Customers:

1. Upon relocation request, all exiting IPTV customers will be converted to our Astro & Broadband service. Customers can choose to have standard Astro service with satellite dish, or unicast Plug & Play without satellite dish.

2. If customers choose to have satellite dish, an additional RM150.00 will be charged for satellite installation. If customers choose to have unicast Plug & Play service, no satellite dish is required, hence no extra charge will be incurred.

For other boxes, customers are advised to recycle them at registered collection centres for proper handling and management of e-waste in an environmentally sound manner. Click here to find a registered collection centre nearby.

For all recycling-related questions, please click here.

If you do not remember any of these details, you may follow the steps below:

• Step 1: Visit https://id.astro.com.my/ and click on "Forgot Astro ID?"
• Step 2: Enter your Account / Smartcard Number. If you do not know where to find it, click on “Where to find your Account/ Smartcard Number”

Note: Only Astro customers whose Astro ID is linked to their subscription can retrieve their Astro ID using this method. Otherwise, you will need to create a new account.

Redemption should be done by the account holder. However, if the account holder is unavailable, immediate family members can make the redemption provided that the account holder has given them the permission to redeem using his account credentials.

All new and existing Astro Pay TV customers can subscribe to ZEE5 Premium for only RM10.80/month by visiting www.astro.com.my/zee5.

Please follow the steps below to subscribe:
Step 1: Go to www.astro.com.my/zee5
Step 2: Log in with your Astro ID
Step 3: Key in your email address and proceed to add ZEE5 to your bill
Step 4: Now, enjoy all your favourite shows on ZEE5!

For Astro Ultra Box or Ulti Boxes, you will be able to see an itemised charge called "Box Fee” in your Astro bill.

If you're trying to visit a website and it won't load, but others do, there could be a variety of causes. If the site itself is down, there's not much you can do but wait.

If you can load the site on other computers or devices (make sure you try different means of connecting to the internet), there may be an issue with your computer or network.

There are some quick fixes that will solve most problems, but you may have to get your hands a little dirty.

1. Try loading the site on a different device.
   • Try loading the website on your phone or on another computer. If the website loads on the other device, the problem lies with your computer.
   • If the website doesn't load on another device, the problem is either with the network
2. Restart your computer.
   • Oftentimes, a simple reboot will fix the problem you're having. Reboot your computer and test the website again.
3. Try loading the site in a different browser.
   • There may be some settings configured incorrectly on your browser. Try a different web browser to see if you can load the website.
4. Temporarily disable your antivirus program.
   • Your antivirus software may be interfering with your ability to load certain websites.
   • Try disabling the software and then loading the site again. Make sure you enable it again once you have identified the problem.
5. Reset your modem and router.
   • Traffic to or from a certain website may be getting tripped up by your modem or router. Resetting these devices may allow you to access the website again.
6. Check your computer's date and time settings.
   • If your date or time is set incorrectly, you may not be able to connect to secure (https://) websites.
   • Check your computer or mobile device's clock to make sure that it is set to the correct time and date.

In the event the problem persists, please provide below details for further escalation:

i. List of websites effected.
ii. Run the Speed Test via LAN (cable) and Wi-Fi connection - Please click here for Speed Test guideline.
iii. Run the Traceroute Test - Please click here for Traceroute Test guideline.
iv. Run the Ping Test - Please click here for Ping Test guideline.

Once you've gathered all the results, kindly send them all through the Feedback Form below.

Quick Info
A Speedtest is a service that provides free analysis of Internet access parameters, such as connection data rate.
A Ping Test shows how long it takes for packets to reach host.
A Traceroute Test traces the route of packets to destination host from our server.

Completing a CAPTCHA during activation is a standard security measure. It ensures that you are a real person and not an automated bot. This step helps protect your account from unauthorized access and ensures safe and secure use of the service. By verifying your identity, this step provides a better and more secure experience for all users

• If you have signed up for a PVR (New customers), you will have to maintain your Astro subscription for 24 months, or a pro-rated penalty shall apply.
• If you have signed up for a PVR (Existing customers), you will have to maintain your Astro subscription for 24 months, or a pro-rated penalty shall apply.
• If you took up a PVR decoder at a special offer with the package subscription of Super Pack Lite/Super Pack/Super Pack Plus/monthly subscription > RM169.60 (price includes Govt tax), you will have to maintain your package subscription for a minimum of 6 months, or a flat penalty fee of RM106 (price includes Govt tax) shall apply.

You will be able to access Netflix on your Ultra and Ulti Box. However, kindly note that if you have an Ulti Box with a Netflix Premium subscription, you will not be able to watch content in 4K UHD and Netflix Spatial Audio.

There are two ways for you to switch your preferred bill delivery method:

A. Customers can manage their account via the My Astro Portal by following these easy steps:

1. Visit www.astro.com.my
2. Select “My Account”, then select “Manage Account”
3. Log in to My Astro Web using your Astro ID
4. Select “Account”
5. Under “Billing”, click on “Bill Delivery Method”
6. Choose your preferred bill delivery method, then click “Proceed”

B. Customers can also manage their account via Astro’s mobile application, the My Astro app by following these easy steps:

1. Open the “My Astro” app on your smartphone. If you do not have it installed, you may download it here (Google Play Store) or here (IOS App Store)
2. Log in with your Astro ID
3. Select “Account” in the navigation bar
4. Select “Bill Delivery Method”
5. Choose your preferred bill delivery method, then click "Proceed

Certain content is limited to selected countries due to copyright restrictions. Hence, you may not be able to view certain movies in your country.

Yes, your complimentary access to the Sun NXT Lite app will continue even after upgrading to the Astro One Epic Pack.

Yes, you may submit for the termination of account, but it is subjected to an Early Termination Fee (ETF) based on the remaining contract.

Yes, customer may choose to have different billing method for each different account.

Physical bill charging will only apply to the account that has opted for paper bills.

Real-time payments are posted almost instantaneously. However, daily system maintenance occurs between 12AM to 3AM - any payment made during this period will be delayed until system maintenance is complete.

If your monthly/quarterly/yearly bill has not been generated yet as of 9

th

July 2024, the 6% Service Tax will be reflected accordingly. For customers whose bill has been generated, the 6% service tax will be reflected in the next bill cycle following your bill frequency.

To set up a Mesh WiFi network around your house, the Mesh unit will need to be paired with the WiFi router. Steps to pair these two devices are as follows:

i. Place the Mesh unit close to the WiFi router (within 2 meters) and power it on

ii. After the Mesh unit starts up, press and hold the WPS buttons of the Mesh unit and the WiFi router for 3 - 5 seconds in turn within 2 minutes

iii. After the WLAN and Internet indicators of the Mesh turns steady blue, the Mesh is connected to the Internet

iv. Move the Mesh to the desired place where you need to expand WiFi and power it on. After the Internet indicator turns steady blue, WiFi is expanded successfully.

All new and existing Astro TV customers can subscribe to WeTV VIP for only RM10.50/month by following the steps below:

Step 1: Go to www.astro.com.my/product/apps/wetv and select Get it now

Step 2: Log in with your Astro ID

Step 3: Key in your mobile number and proceed to add WeTV to your bill

Step 4: Once you have validated your mobile number via the OTP code, you will be able to enjoy VIP-exclusive shows on WeTV!

Starting

12 December 2023

, users must log in using their

registered email address

,

mobile number

, or a

social account

(Facebook, Google, or Apple) to access any of Astro's digital platforms, including

My Astro

,

Astro GO

, and

Astro's official website

.

Yes, you will need to activate SecureGo again if you're on a new device.

When you activate SecureGo on a different device, you will receive an email to notify you that the device has been de-registered. 

If you suspect that someone else has gained access to your phone, contact our customer service immediately at 03-9543 3838 to unlink your Astro ID. 

The Viu app offers subtitles in English for all content and Bahasa Malaysia for selected content.
Additionally, dubbing in Bahasa Malaysia, Bahasa Indonesia and Cantonese is also available for
selected titles. You will be able to select or switch off subtitles and dubbing when you play
videos in full screen.

No, you are not allowed to change your due date or maintain your old due date. Your current due date is as per Astro Policy. Therefore, to ensure that you continue to enjoy uninterrupted services, we advise you to observe this change in due date from Day 30 to Day 25 and proceed with the necessary payment.

Astro customers with the Ultra or Ulti Box can access Prime Video via their Ultra/Ulti Box or stream directly using the Prime Video app. If you have not yet upgraded to Astro’s Ultra/Ulti Box, please reach out to us on WhatsApp by sending “Hi” to 03-9543 3838.

If you receive the "Device Was Not Found" error message, it may be because your device has been automatically removed due to concurrent streaming limits being exceeded.
Please perform the following checks and troubleshooting steps:

1. Stop streaming on one of the other devices currently using your Astro account.
2. Close the Astro Go app on any unused devices.
3. Return to your Smart TV and try streaming again.

If you are unable to remove a device or continue to see the error message, proceed to submit report via WhatsApp or Feedback Form and provide:

• Astro ID use
• Smart TV model
• OS version
• Error reported on device

This will help our support team investigate and assist you further.

SecureGo authorisations are required for all transactions via My Astro app v6.2.0 (effective 18 June 2024). Transactions via other platforms or older app version will still use the SMS OTP.

If you choose to downgrade your packs or terminate Astro services before the end of your contract term, you will have to pay a cancellation fee. This cancellation fee is calculated based on your subscribed package, contract period and box type. If you cancel your service(s)/change your packages upon completion of your contract term, you won't have to pay any cancellation fee.

Please disregard the reminder if payment had been made and do check if you have any outstanding balance on Astro Quick Pay.

Yes, this is a one-time approval, and you do not need to submit your application every month.

The payment will take some time to reflect in My Astro app and web account. If you experience any further issues or it is still not reflecting in My Astro, please reach out to us via WhatsApp at 03-9543 3838 for more details.

The Astro Fibre App is supported on all iOS devices version 16 or later and Android devices version 9 or later. To download the app, you may visit your mobile app store and search for “Astro Fibre App”. Alternatively, you may install the app on your mobile device by clicking here (Google Play Store) or here (iOS App Store).