Please refer below to set up your Ultra/Ulti Plug & Play Box.

To connect via LAN cable:

1. Switch off your old Astro box.
2. To connect your Plug& Play Box via LAN cable:
   a) Remove the LAN cable from your old Astro box and connect the LAN cable to your new Plug & Play Box.
   i) For Maxis IPTV customers, keep the other end of the LAN cable connected to your router.
   ii) For TIME IPTV customers, go to the other end of the same LAN cable, plug it out from your modem, and into any LAN port on your router. Ensure that you’re not plugging your LAN cable back into the same box.
   

Note: If you have a two-in-one modem & router, you can skip Step ii).

To connect via Wi-Fi:

Remove your LAN cable from your old Astro box, and do not plug it into your new Plug & Play Box.

The recommended home internet speed for a smooth viewing is 30Mbps.

Astro GO+ is a service add-on that:

• Enables the simultaneous viewing of Astro GO for up to 4 users/devices.
• Increases the cloud recording storage from 200 hours up to 1500 hours.

You may cancel your iQIYI subscription in the app by following these steps:
Step 1: Go to Home Page
Step 2: Click on "VIP subscription"
Step 3: Click on "Manage VIP subscription" (Gear icon)
Step 4: Click on "Cancel VIP subscription"

You will receive SMS notifications upon successful sign-up with a delivery tracking number for the Plug & Play Box and the Astro SIM card.

No, there is no additional charges applicable.

4K content is currently not supported on the Ultra/Ulti Box. However, you can still enjoy Prime Video in 4K on compatible smart devices.

If you would like more information or to provide feedback on Astro Rewards, kindly reach out to us at 03 9543 3838 or visit one of our Astro service centres.

There will be no installation fee for both Astro Box and Ultra Box. The Multiroom (second decoder) must be installed at the same registered address as your primary subscription.

Yes, provided that your Plug & Play Box has not been activated and no later than 7 days upon receiving both the Plug & Play Box and Astro SIM card. In the event that you have activated your Plug & Play Box and wish to cancel, a contract penalty fee will apply.

We will reach out to you for a suitable time to pick up the Plug & Play Box and Astro SIM card.

No, you are still able to subscribe to iQIYI on your current Astro pack.

For Residential Astro Pay TV customers: You may change your contract from e.g., 12-month to 24-month without incurring a switching fee or cancellation fee. However, if you change your contract from e.g., 24-month to 12-month, will be charged a cancellation fee accordingly if still within minimum term (contract) period. No switching fee applicable.

No, the Ulti Box does not support 4K UHD content. If you would like to watch Astro's 4K UHD content, please sign up for an Ultra box at Astro Ultra Box and Ulti Box | Astro.

No, please return your old Astro Fibre modem and its power supply unit (PSU). There will be no penalty fees if the cable is damaged or lost.

As an existing customer, you will notice some changes after migrating to the new Disney+ app as some personalised viewing data, such as profiles, viewing activity, downloads and app preferences, will not be migrated.

Therefore, you will need to set up your profiles and preferences again when you first start using the new Disney+ app.

For further enquiries regarding the Disney+ app migration, new Disney+ app experience and app-related features, please visit the Disney+ Help Centre.

Customers who downgraded their package from Astro Broadband Bundle/Astro Fibre Bundle to Astro TV Pack only will be charged 8% Service Tax effective 1^st March 2024 onwards. Any adjustment or proration charges incurred before the downgrade will be calculated based on 8% service tax in the next bill, in line with the latest package downgrade.

Some of our payment partners require payees to scan the barcode on the statement to make payment. Always bring your Astro bill statement when making payment over the counter.

If you see this message, it means the maximum number of devices currently streaming on your Astro account has been exceeded.
Please perform the following checks and troubleshooting steps:

1. Stop Streaming on Other Devices

• Check if Astro is currently being streamed on other devices linked to your account.
• Close the Astro app or stop playback on any unused devices.

2. Wait a Few Minutes

• If a streaming session was recently ended, it may take a few minutes for the system to update.

3. Try Again

• Return to your device and attempt to stream the content again.

4. Check Your Device Usage

• Go to www.astrogo.com.my or open the Astro GO app.
• Log in using your Astro ID and password.
• Review the list of registered devices.
• Remove a device that you no longer use.
• Return to your new device and try signing in again

If you are unable to remove a device or continue to see the error message, proceed to submit report via WhatsApp or Feedback Form and provide:

• Astro ID use
• Smart TV model
• OS version
• Error reported on device

This will help our support team investigate and assist you further.

Note: Please be aware that only one Smart TV device is allowed per account at any point in time.

Bahasa Malaysia (BM) and Traditional Chinese subtitles will be available where rights permit. However, subtitle availability may vary depending on the title.

Please ensure that you are logging in with the correct Astro ID and password. If you cannot remember your password, use the “Forgot Password” option to reset.

If the issue persists, you can submit an enquiry through our feedback form here. Please refer to the steps below:

Step 1: Select Feedback Type: Technical issues
Step 2: Select Issue: I have an enquiry/issue with Apps

Then choose the app you’re having trouble logging into and submit the form.
We will get in touch with you within 48 hours.

Important: To use Astro GO, My Astro, and other partner apps included in your subscription, your Astro ID must be linked to an active Astro subscription. You can refer to the steps here to learn how to link your Astro ID.

Yes, you may still watch Love Nature on CH550 and Sports content on CH810–CH833, which offer the same content and programmes in HD resolution.

Kindly note that channels CH810–CH833 are only available to customers with Sports entitlement in their subscribed TV Pack.

Upon submitting your application, you will receive the eKYC link via SMS/email/astro.com.my to complete the eKYC verification within 3 days.

For new Astro Fibre customers with the RG21 router, you will be guided to install the Astro Fibre App on your mobile device during the installation of the service. Alternatively, you may refer to the user guide here for self-installation.

Upgrade to Sun NXT Premium via www.astro.com.my/sunnxt or the MyAstro app. For further assistance, contact our customer service at 03-9543 3838.

After successfully adding ZEE5 Premium to your bill, follow the simple steps below to stream ZEE5 on your Ultra/Ulti Box:

Step 1: Go to your Astro Home Page and click “ZEE5” under the Apps rail
Step 2: Scan the QR code on screen with your mobile device
Step 3: Log in with an existing ZEE5 ID or sign up for a new account. Then, enter the activation code displayed on your TV screen into the ZEE5 mobile app.
Step 4: Now, enjoy streaming ZEE5 on your Ultra/Ulti Box!
Please ensure that the email address used to log in to the app is the same one used to purchase your ZEE5 premium subscription.

Currently Astro GO is only available in Malaysia. You will not be able to access it if you are overseas.

If you subscribe to the same or higher Disney+ plan through Astro and activate it using the same login credentials (i.e. email address or mobile number and password) associated with your existing Disney+-billed subscription, your personalised viewing data (e.g. Watch History, Watchlist etc.) will be retained.

Please use your Astro ID that was registered with your Astro Fibre subscription to log in to the Astro Fibre App.

Watch this video or follow below steps to Improve Slow WiFi Connection for Astro Fibre

Slow browsing using LAN cable

Looks like there is something wrong with your service connection.

Please run the Speed Test and attach the picture or screenshot of the speed test in the Feedback Form below, in order for us to provide further assistances.

Click here for Speed Test guideline.

Quick Info

A Speedtest is a service that provides free analysis of Internet access parameters, such as connection data rate.

Slow browsing using Wi-Fi

1. Router Positioning

Most people underestimate the importance of picking a good spot for a Wi-Fi router. Even a small shift in positioning could end up being the difference between day and night.

i) High vs. Low

Put the router as high up as possible to extend the broadcasting range of the radio waves. This also helps clear the router of possible interferences.

ii) Concrete & Metals

Make sure your router isn't blocked by any other objects, especially devices that are electronic. Also, avoid placing your router in your basement as this area is usually enclosed by a lot of concrete, which can be almost impossible for Wi-Fi signals to penetrate.

iii) Distance to Router

The further away from your router you get, the weaker the Wi-Fi signal. Therefore, the best option is to place your router as close to your devices as possible, but this is only practical if you have one main area where you tend to use your devices.

Otherwise, you should place your router near the center of your home. After all, Wi-Fi broadcasts in 360 degrees, so it doesn't make sense to put it at one end of the house.

2. Wireless Interference & Noise

You've probably never noticed but there are wireless signals all around you wherever you go and they're passing through you all the time. From where? Electronic devices, Wi-Fi routers, satellites, cell towers, and more.

Although Wi-Fi is supposed to be on a different frequency than most of these devices, the amount of radio noise can still cause interference. Some common causes of interference include:

i) Microwaves

ii) Bluetooth Devices

iii) Cordless Phone

3. Surrounding Wi-Fi signals

A truth of the modern world is that every household has their own Wi-Fi network, which can cause issues with channel overlap. This can be somewhat problematic in a townhouse, but is especially problematic in housing complexes and apartments where there can be many routers within close proximity.

Which is why it's important that you pick a good channel in your router settings. Modern routers can choose channels for you automatically, but sometimes it's better to investigate and find the best channel yourself.

4. Usage

More likely, however, is that the people on your network such as friends, roommates, or family members are participating in bandwidth-heavy activities like gaming and streaming Ultrabox/ Netflix.

Fortunately, if this is the case, you can prioritize your own network traffic by enabling Quality of Service in your router settings.

If the problem persists, please run a Ping Test, Traceroute Test and attach the picture or screenshot of both test results in the Feedback Form below, in order for us to provide further assistances.

Please make sure to attach the required screenshot(s) in ONE file (i.e. Microsoft Word document, PDF, Image file) before submitting the form.


Quick Info
A Speedtest is a service that provides free analysis of Internet access parameters, such as connection data rate.
A Ping Test shows how long it takes for packets to reach host.
A Traceroute Test traces the route of packets to destination host from our server.

You can recover your Netflix subscription  here.

If you encounter this message while using the Astro app on your Smart TV, please follow the steps below:

1. Update Your Smart TV Software

• Ensure your Smart TV is running the latest software or firmware version.
• Check for available updates in your TV's Settings menu and install them if available.

2. Restart Your Devices

• Turn off and restart the following devices:

• Router
• Modem (if applicable)
• Smart TV

• Wait a few minutes for the internet connection to stabilize.
• Launch the Astro Smart TV app again and test the playback.

3. Clear the Astro App Cache

• Clear the application cache on your Smart TV.
• Once completed, reopen the Astro app and check if the issue persists.

4. Reinstall the Astro App

• Uninstall the Astro app from your Smart TV.
• Download and install the latest version from your TV's app store.
• Open the app and test the playback again.

If you are still having issues, proceed to submit report via WhatsApp or Feedback Form and provide:

• Astro ID use
• Smart TV model
• OS version
• Type of internet connection (Wi‑Fi or LAN)
• Screenshot/photo of the error message

This will help our support team investigate and assist you further.

SecureGo is an authentication process that allows you to approve your My Astro transactions safely and easily using one-tap verification. This feature is available on the My Astro app. 

Once SecureGo is activated, it will be your default transaction approval method on the My Astro app. 

Yes, if you’re a non-Malaysian living or working in Malaysia, your Astro Broadband Bundle/Astro Fibre Bundle are subject to the 6% Service Tax effective bill date 9th July 2024 onwards.

The Ultra Box is Astro's latest generation of 4K UHD enabled box with Cloud recording feature, redesigned new interface, and UHD resolution. Just connect the all-new Ultra Box to the internet and take control of your entertainment and explore over 100,000 videos that are waiting to be streamed, anytime. With the ability to record as many shows as you want simultaneously.

The new interface on Astro Ultra Box offers an enhanced viewing experience with a brand-new look and feel with features such as:

· New Home Screen - Everything you see is yours

· Discover VOD - Discover 100k videos, stream anytime, anywhere including in 4K UHD

· Search - Search faster and easier

· Play from Start - You missed the start? Just restart

· Stop Here, Continue There - Stop on one screen and continue on another device

· Multi-Screen - Stream seamlessly across any device

· Cloud Recording - Record all the programmes you want at the same time

. **Continuous viewing - Enable to continue watching your favorite shows during raining

Note: ** Except 4K UHD, Astro First and all radio channels

No. If you are a non-Astro subscriber, you will still be able to create an Astro ID, but access and use of Astro's digital services will be limited. If you are an Astro subscriber, please link your Astro ID to your Astro account number to enjoy exclusive access to all of Astro's digital services.

Yes. To change the language, go to the app’s side menu, then go to Settings and select the preferred interface language.

A . Via www.astro.com.my/sunnxt
Sun NXT Lite Flow

• Step 1 : Open the Sun NXT app page on your device and click on “Get or activate Sun NXT now” to log in with your Astro ID and user will proceed Add On subscription.

• Step 2: After successful activation, users will be redirected to the Sun NXT web app.
  Note: An email with an auto-generated password will be sent to the user’s email.

Sun NXT Premium Flow

• Step 1: Open the Sun NXT app page on your device and click on “Get or activate Sun NXT now” to log in with your Astro ID.

• Step 2: After successfully activating the Add-on subscription, users will be redirected to the Sun NXT web app.

B. Via the My Astro App

• Step 1: Download the My Astro app from the Apple App Store, Google Play Store, or Huawei App Gallery.
• Step 2: Go to Account > Subscription > Add-ons > Apps > Sun NXT Premium > Confirm Order.
• Step 3: Press "Get or Activate Sun NXT Now" and follow the on-screen steps.
• Step 4: Once redirected to the Sun NXT app, create a Sun NXT account as instructed.

C. Via the Ultra/Ulti Box
Sun NXT Lite Flow

• Step 1: Launch the Sun NXT app from the rail of apps at the bottom of the screen. Click on ‘Go to Sun NXT app’ at the bottom.
• Step 2: Input email address for activation.
• Step 3: Validate email using an OTP.
• Step 4: Once account is activated & provisioning is successful, Astro will send an email on the auto-generated password upon successful subscription.
• Step 5: The user will be redirected to the partner’s app, where they will land on the Sun NXT main page and they can proceed to log in with their activated account via Astro.

Sun NXT Premium Flow

• Step 1: Launch the Sun NXT app from the rail of apps at the bottom of the screen.
• Step 2: lick on ‘Go to Sun NXT app’ at the bottom.
• Step 3: Input email address for activation.
• Step 4: Validate email using an OTP.
• Step 5: Once account is activated & provisioning is successful, Astro will send an email on the auto-generated password upon successful subscription.
• Step 6: The user will be redirected to the partner’s app, where they will land on the Sun NXT main page and they can proceed to log in with their activated account via Astro.

Please ensure that:

a. Your Astro subscription includes Disney+. You can verify this via My Astro app or web under Manage Subscription → Add-ons.

b. Your Disney+ subscription has been activated. You can check the activation status via My Astro app or web under Manage Subscription → Add-ons.

c. You are using the correct email address or mobile number associated with your Disney+ account.

If you continue to experience login issues, please WhatsApp or call Astro’s Customer Service at +603 9543 3838.

Your cloud recording space will revert to 200 hours by default. If your current recordings exceed 200 hours, the system will delete the exceeded hours once you have stopped the Astro GO+ subscription starting with the oldest recordings first.