You do not need to request for a reconnection as our system will detect your payment and process it immediately, provided you paid via a real-time payment channel.

Click here for a full list of our payment channels.

STEP 1

On your remote, press the HOME button.

STEP 2

Navigate to Update Satellite Frequency and press “OK”.

STEP 3

Choose Test Satellite Frequency and press “OK”.

STEP 4

Select Yes, continue and press "OK" to start the test.

Otherwise, select No, go back to cancel.

STEP 5

Satellite Frequency Test progress screen will be displayed.

STEP 6

The test result will be displayed once completed.

Press "OK" to go back to channel.

You can add a new Netflix account to your bill through CH 741 or clicking the Netflix button on the remote control. Please enter the email address you would like to use for Netflix subscription and ensure the Billing partner is Astro.

If you would like to transfer your existing Netflix Account to be charged under Astro bill, please follow the steps below:

1. Cancel your existing subscription with Netflix

1. Once the remaining duration of your existing subscription has ended, you may proceed to subscribe for Netflix via Astro bill

1. To subscribe, go to CH 741 and enter the email address used for your previous subscription with Netflix

1. Once successfully completed, all existing settings and watching history on your Netflix account will be brought over

STEP 1

Choose your language preferences for both Menu Language and Info Language. Then, press "OK".

STEP 2

Select you box operating mode and press "OK".

STEP 3

Select the resolution supports by your TV and press "OK".

STEP 4

Press "OK" to proceed to the next screen.

STEP 5

Please select the LNB type and press "OK".

STEP 6

Select this as the Entry Point and press "OK" to confirm your selection.

STEP 7

Signal reading results for Tuner 1 and Tuner 2 screen will be displayed. Then, press "OK" to proceed to next screen.

STEP 8

Select Yes, continue and press "OK" to connect to Wi-Fi network.

STEP 9

Please wait while the box scanning for the available Wi-Fi network.

STEP 10

Select your Wi-Fi network and navigate to "Connect".

STEP 11

Please enter the password to connect to your network and press "OK".

STEP 12

You are successfully connected when this screen appears.

1. Open/Download the My Astro app or visit My Astro web.

2. Login with your Astro ID.

3. Go to Account.

4. Under Billing, tap on e-Invoice.

5. Toggle the button to enable the e-Invoice, fill in the require details and tap 'Submit'.

6. Tap 'Confirm'.

7. Select 'Approve' to update e-invoice.

8. A successful notification will be displayed.

You will regain access to your channels on Astro immediately once the equipment has been installed at your new house, provided your account is active. Customers can still enjoy viewing via Astro Go.

Only Visa, MasterCard, and American Express Credit Cards and Debit Cards issued by banks in Malaysia are accepted by Astro-owned payment channels. Official Astro payment partners may have different policies - please check with your preferred payment partner for the latest information.

Yes, we may send payment reminders to your WhatsApp number including URL link to the payment getaway, https://quickpay.astro.com.my/xxxxxx. Only click the payment link when you are sure that the message is sent via Astro's official WhatsApp number, 03-9543 3838 and when the link shared is free of any misspelling.

If the sender or link looks suspicious, don't click it or share personal or banking details. Report any suspected scams to Feedback Form.

SecureGo: A transaction authentication alert that is sent to your registered device. With SecureGo, you can either approve or reject the transaction in a matter of seconds. 

WhatsApp OTP: OTP stands for One Time Password which is a 6-digit number that is sent to your mobile number via WhatsApp for verification purposes 

Skyworth RG21

1. Please connect your computer or laptop to your Astro Fibre router using WiFi or LAN cable. Your LAN cable must be connected from the yellow port of Astro Fibre router (Any available port).

2. Once connected, open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox and etc.

3. On the address bar, type http://192.168.100.254 and below page will appear.

Login using your username and password if you have changed the router login setting. Otherwise, your default router login is as per below.

Username: user
Password: user

4. Once you have successfully logged in, the router's web-based setup page will appear.

5. At the top of the page, click WLAN to configure the WiFi parameters.

6. You may change the Primary SSID (WiFI Name) and the WPA Passphrase (WiFi Password) to follow your preferences for 2.4G Wi-Fi Settings, then click "Save & Apply" for the changes to take place.

Please reconnect to the new WiFi name with the new password once completed.

7. You may make the same changes for 5G Settings by change the Primary SSID (WiFI Name) and the WPA Passphrase (WiFi Password) to follow your preferences, then click "Save & Apply" for the changes to take place.

STEP 1

Check on the adapter's power light.

If the adapter's power light is ON, please refer to Blank Screen troubleshooting steps here.

Otherwise, if the adapter's power light is OFF, switch off the power for your box.

STEP 2

Ensure power cable is connected tightly.

Plug in power cable to different power socket and switch on the plug.

You should no longer be experiencing this problem.

If issue remains, proceed to STEP 3.

STEP 3

Try a different power socket to connect the equipment.

Turn on the power socket and check the adapter's power light.

If there is no light on your power adaptor's, please submit the issue on our Feedback Form with error details and provide your sim card number for assistance.

Please indicate in the form if any lightning strike/thunderstorm/power trip occurred.

You can access your ZEE5 Premium account on up to five (5) devices at a time, including your Ultra/Ulti Box. To ensure a smoother streaming experience, please sign out from any unused devices.

If you have forgotten your username or password, you may follow the steps below:

Step 1. Go to netflix.com

Step 2: Click on Sign In

Step 3: Click on "Need Help

For Astro Ultra and Ulti Box customers

• No action is required.
• The new Disney+ app will be made available automatically on your Astro Box from 7 October 2026.
• You can sign in using the same email address or mobile number associated with your existing Disney+ account to start streaming.

For customers who watch on personal devices (e.g. mobile phones, tablets or Smart TVs)

• Download the new Disney+ app to continue streaming Disney+.
• You can sign in using the same email address or mobile number associated with your existing Disney+ account to start streaming.
• The current Disney+ app will remain available until 4 November 2026, giving customers time to make the switch.
• Samsung and LG Smart TV users are encouraged to download the new app before 20 October 2026.

STEP 1: Confirm TV Input Source
Use your TV remote to select the correct input:

HDMI for HDMI cable users.
AV/Video for RCA cable users.

Cycle through inputs (HDMI1, HDMI2, AV1, etc.) until the Astro box screen appears.

STEP 2: Check Cable Connections

HDMI Users:
Ensure HDMI cable is firmly connected to both the Astro box and TV. Try a different HDMI port or cable if needed.

RCA Users:
Match red (audio right), white (audio left), and yellow (video) cables to the correct ports. Ensure cables are not loose or damaged.

STEP 3: Power Cycle the Astro Box

Turn off the Astro box.
Unplug the power cable from the wall socket.
Wait 10 seconds, plug it back in, and turn it on.

STEP 4: Test with Alternative Port or Cable

Try a different HDMI or AV port on your TV. Use a different HDMI or RCA cable to rule out faults.

STEP 5: Contact Astro Support

If no improvement seen, please submit the issue in our Feedback Form and attach a picture of your smart card number for assistance or WhatsApp us at 03-95433838.

For multi-frequency customers, RM10.00 is charged per physical bill generated.

If your Astro box displays an error message on your TV that says:
- Unable to Play Video (HDCP Failed)
- Your HDMI configuration is preventing the video from being displayed. Please ensure that your HDMI cable is connected to HDCP-capable TV. Please check with your TV manufacturer or qualified technician if your problem persists. (HDCP 2)
- The selected HDMI port on your TV does not support HDCP version required for programme playback. Please check with your TV manufacturer or qualified technician if your problem persists.
HDCP 2.2 support required for 4K UHD and HDCP 1.4 for others (CDE:2)

Error code: HDCP 0, HDCP 1, HDCP 2, CDE:2

Note: To view 4K UHD content on your Ultra Box, your 4K TV must be HDCP 2.2 compliant. If you are using a non-4K TV, it is likely not HDCP 2.2 compliant.

If you are certain your TV is HDCP compliant and the error persists, try the troubleshooting steps below:

STEP 1
Switch off the power of your box and make sure that the adapter’s power light is off.

STEP 2
Unplug the HDMI cable from your TV and plug it back in securely to other available HDMI port.

STEP 3
Switch on the power for your box and make sure that the adapter’s power light is on.
Please wait for 5 minutes.

STEP 4
Turn on your box. Do select the correct TV input.
You should no longer be experiencing this problem.

You will be able to view your new package(s) within 24 hours of subscribing. Please note that if you are an Astro customer subscribing to HD channels, you will have to connect an HDMI cable to your TV before you will be able to enjoy the channels.

As e‑Invoicing supports quicker processing, smoother transactions and a more seamless billing and tax compliance experience over time, we highly encourage customers to stay opted in. It also makes it much easier for you to keep proper records for tax relief claims. If you still wish to stop receiving e‑Invoices, you can opt out through the My Astro website or the My Astro app.

On the My Astro website:

1. Log in using your Astro ID.
2. Click Bills, scroll down to e-Invoice, and toggle it off.
3. Please click Confirm to ensure that the changes has taken place.

On the My Astro app:

1. Log in using your Astro ID.
2. Tap your account number or the default profile icon at the top left.
3. Scroll down to the Billing section, select e-Invoice, and turn the toggle off.
4. Please click Confirm to ensure that the changes has taken place.

1. Open/Download the My Astro app or visit My Astro web.

2. Login with your Astro ID.

3. Go to Account.

4. Select 'Profile'.

5. Under Addresses, tap on the edit icon.

6. Select 'Approve' to update service address.

7. Select the Residential type and key-in the postcode, Tap 'Check'.

8. Key-in the Street, House number and Area.

9. Select 'No, I'm all set' and tap 'Proceed'.

10. Tap ' Confirm'.

11. A successful notification will be displayed.

If you did not receive the recovery email or verification code, please make sure that:

1. You are entering the correct email address or mobile number you used to register for your Astro ID.
2. Check your junk mailbox or spam folder.

To find out which email or phone number you have used to register your Astro ID, you may submit a feedback form. Kindly select feedback type "I have an enquiry/issue with Apps" choose "Astro GO"

We will get in touch with you within 48 hours to solve your enquirie

Video On Demand is FREE* for all Astro customers with connected Astro boxes (Ultra Box, Ulti Box, HD-PVR &PVR boxes). Aside from our extensive library of more than 110,000 video, you can also enjoy blockbuster movies on a pay-per-view basis.

Please note that your default pin is 0000 to make any purchases.

*Entitlement is based on subscription package.

STEP 1
On your remote, press the Home button and the home menu will be displayed on your screen.

STEP 2
Navigate to Profile.

STEP 3 The Profile Selection Screen will be displayed.

STEP 5
Choose a profile to edit.

STEP 6
Navigate to Name.

STEP 7
Enter your new Profile Name, navigate to DONE and press "OK".

STEP 8
Your new profile name will be shown in the Profile Selection Screen.

1. Open/Download the My Astro app or visit My Astro web.

2. Login with your Astro ID.

3. Go to Add on Apps.

4. Under Apps categoty, tap Show more to show the full list of available Apps.

5. Select the require App to add-on and tap 'Proceed'.

6. Review order, select agreed and tap on 'Confirm order'.

7. Select 'Approve' to edit add-ons.

8. A confirmation order will be displayed and click 'Done' to close.

Intermittent internet connection using LAN cable

Looks like there is something wrong with your service connection.

Please run a Ping Test, Traceroute Test and attach the picture or screenshot of both test results in the Feedback Form below, in order for us to provide further assistances.

Please make sure to attach the required screenshot(s) in ONE file (i.e. Microsoft Word document, PDF, Image file) before submitting the form.

Quick Info

A Ping Test shows how long it takes for packets to reach host.

A Traceroute Test traces the route of packets to destination host from our server.

Intermittent internet connection using Wi-Fi

1. Router Positioning

Most people underestimate the importance of picking a good spot for a Wi-Fi router. Even a small shift in positioning could end up being the difference between day and night.

i) High vs. Low

Put the router as high up as possible to extend the broadcasting range of the radio waves. This also helps clear the router of possible interferences.

ii) Concrete & Metals

Make sure your router isn't blocked by any other objects, especially devices that are electronic. Also, avoid placing your router in your basement as this area is usually enclosed by a lot of concrete, which can be almost impossible for Wi-Fi signals to penetrate.

iii) Distance to Router

The further away from your router you get, the weaker the Wi-Fi signal. Therefore, the best option is to place your router as close to your devices as possible, but this is only practical if you have one main area where you tend to use your devices.

Otherwise, you should place your router near the center of your home. After all, Wi-Fi broadcasts in 360 degrees, so it doesn't make sense to put it at one end of the house.

2. Wireless Interference & Noise

You've probably never noticed but there are wireless signals all around you wherever you go and they're passing through you all the time. From where? Electronic devices, Wi-Fi routers, satellites, cell towers, and more.

Although Wi-Fi is supposed to be on a different frequency than most of these devices, the amount of radio noise can still cause interference. Some common causes of interference include:

i) Microwaves

ii) Bluetooth Devices

iii) Cordless Phone

3. Surrounding Wi-Fi signals

A truth of the modern world is that every household has their own Wi-Fi network, which can cause issues with channel overlap. This can be somewhat problematic in a townhouse, but is especially problematic in housing complexes and apartments where there can be many routers within close proximity.

Which is why it's important that you pick a good channel in your router settings. Modern routers can choose channels for you automatically, but sometimes it's better to investigate and find the best channel yourself.

4. Usage

More likely, however, is that the people on your network such as friends, roommates, or family members are participating in bandwidth-heavy activities like gaming and streaming Ultrabox/Netflix.

Fortunately, if this is the case, you can prioritize your own network traffic by enabling Quality of Service in your router settings.

If the problem persists, please run a Ping Test, Traceroute Test and attach the picture or screenshot of both test results in the Feedback Form below, in order for us to provide further assistances.

Please make sure to attach the required screenshot(s) in ONE file (i.e. Microsoft Word document, PDF, Image file) before submitting the form.

Quick Info

A Speedtest is a service that provides free analysis of Internet access parameters, such as connection data rate.

A Ping Test shows how long it takes for packets to reach host.

A Traceroute Test traces the route of packets to destination host from our server.

No, you are not required to print any form before handing the Ultra Box or Ulti Box. However, when you return your Astro Box at a courier partner's branch, you will need to fill out a consignment note. Please retain this note for at least 14 days as proof of return.

A security question will be asked when making payments with credit cards over the phone. All other payment channels will not require any form of verification.

The Ultra Box or Ulti Box and the SIM Card are property of Astro, as per our General Terms and Conditions for Astro Services. Therefore, customers are accountable for returning the boxes upon the termination of their Astro subscription. Otherwise, an RM100 (exclusive of Sales and Service Tax) box fee will be charged to the customer's account.

Astro & Broadband comes with 24-month contract commitment.

Yes, all existing Astro & Broadband customers within contract or out of contract can subscribe to Astro & Broadband offerings. The 24 months contract will be renewed upon signing up for the new packs.

For customers that would like to subscribe to Multiroom with a box installation,

(i) customers on the old packages (example Family Pack, Starter Pack, Value Pack, Super Pack or Super Pack Plus) will have to subscribe to our new packages first by sending "Switch" to 03-9543 3838 via WhatsApp;

(ii) customers on the new Astro packages can subscribe by visiting product.astro.com.my/multiroom or WhatsApp "Hi" to 03-9543 3838.

You may retain your watch history and settings of your existing Netflix account by using the same email of your Netflix account during the linking of your Netflix account with Astro.

1. Ensure Modem/Router are connected tightly to the power socket.

2. Try to use another power socket / power source to eliminate faulty power sockets/power sources which could cause the issue.

3. If issue persists, submit your Feedback Form for further assistance.

No, you can only stream the beIN SPORTS CONNECT app on one device at a time.

If you're trying to visit a website and it won't load, but others do, there could be a variety of causes. If the site itself is down, there's not much you can do but wait.

If you can load the site on other computers or devices (make sure you try different means of connecting to the internet), there may be an issue with your computer or network.

There are some quick fixes that will solve most problems, but you may have to get your hands a little dirty.

1. Try loading the site on a different device.

Try loading the website on your phone or on another computer. If the website loads on the other device, the problem lies with your computer.

If the website doesn't load on another device, the problem is either with the network or the website itself.

2. Restart your computer.

Oftentimes, a simple reboot will fix the problem you're having. Reboot your computer and test the website again.

3. Try loading the site in a different browser.

There may be some settings configured incorrectly on your browser. Try a different web browser to see if you can load the website.

4. Temporarily disable your antivirus program.

Your antivirus software may be interfering with your ability to load certain websites.

Try disabling the software and then loading the site again. Make sure you enable it again once you have identified the problem.

5. Reset your modem and router.

Traffic to or from a certain website may be getting tripped up by your modem or router. Resetting these devices may allow you to access the website again.

6. Check your computer's date and time settings.

If your date or time is set incorrectly, you may not be able to connect to secure (https://) websites.

Check your computer or mobile device's clock to make sure that it is set to the correct time and date.

In the event the problem persists, please provide below details for further escalation:

i. List of websites effected.

ii. Run the Speed Test via LAN (cable) and Wi-Fi connection - Please click here for Speed Test guideline.

iii. Run the Traceroute Test - Please click here for Traceroute Test guideline.

iv. Run the Ping Test - Please click here for Ping Test guideline.

Once you've gathered all the results, kindly send them all through the Feedback Form below.

Quick Info
A Speedtest is a service that provides free analysis of Internet access parameters, such as connection data rate.
A Ping Test shows how long it takes for packets to reach host.
A Traceroute Test traces the route of packets to destination host from our server.

STEP 1
On your remote, press the Home button and the home menu will be displayed on your screen.

STEP 4
Navigate to Add Profile.

STEP 5
Choose your Profile.

STEP 6
Input the Profile Name and navigate to DONE.

STEP 7
Choose the Age Group of the new profile and press "OK".

STEP 8
Your new profile will be shown in the Profile Selection Screen.

STEP 1

Check your current software version on your box.

If the software version updated (Refer to Table 1) , proceed to STEP 2.

If software version different from Table 1, click here for Software Update guide.

Table 1

Once software is updated, tune to the impacted channel.

If issue persist, proceed to STEP 2.

STEP 2

Run Test Satellite Frequency.

Click here for the guide.

If dCSS Scan Entrypoint Success, proceed to submit report here.

Guide to submit report:

At Feedback Type select "I have Astro service related question/request" and Sub Category as "Technical Interruption".

Fill up all the required information and submit.

Please indicate if you agreed to recontract for 12 months (technical visit is FOC) or paid visitation (RM65).

You will receive appointment details via SMS within 48 hours.

If dCSS Scan Entrypoint Fail, proceed to STEP 3.

STEP 3

Proceed to Update Satellite Frequency.

Click herefor the guide.
Once completed, tune to the impacted channel.

If issue persist, proceed to submit report here.

Guide to submit report:

At Feedback Type select "I have Astro service related question/request" and Sub Category as "Technical Interruption".

Fill up all the required information and submit.

Please indicate if you agreed to recontract for 12 months (technical visit is FOC) or paid visitation (RM65).

You will receive appointment details via SMS within 48 hours.

You will be able to enjoy all the content on ZEE5 immediately upon successful purchase from the Astro website. You may enjoy your Premium privileges from the ZEE5 app on your Ultra Box, Ulti Box, mobile devices (Android & iOS), Apple TV, Android TV, as well as on Web (www.Zee5.com).Please ensure that the email address used to log in to the app is the same one used to purchase your ZEE5 premium subscription.

Yes, you can manage all of your Astro Fibre subscriptions with the Astro Fibre App. However, you would need to create a different Astro ID for each Astro Fibre account.

Yes, you will need to activate SecureGo again.

To check your account balance for your Astro bill, you can do it through My Astro. Here's how:

1. Download the My Astro app or visit My Astro web
2. Login using your Astro ID
3. Go to Account > Bills
4. You will be able to see your latest account balance, make payment, download bill statements, and view payment history all in one place

Alternatively, if you only want to check your account balance, you can do so with the steps below (Note: Method below is only for account balance viewing, not payment)

Step 1:
Type ASTRO<space>BAL<space>10-Digit Astro Account No.
Example: ASTRO BAL 08XXXXXXXX

*Standard telco charges and Terms and Conditions apply

Step 2:
Send SMS to 66688

💳 Want to manage your Astro bills easily?

📱 Download the My Astro app to:
- View and download bill statements
- Check payment history
- Pay in just a few taps

You will receive an SMS from us informing you of the receipt of your Astro Box. However, if you wish to track the delivery of your Astro Box, you can use the tracking number available on the consignment note.

If you would like for more information, kindly visit our Multiroom page via Astro website https://www.astro.com.my/multiroom

To view the terms and conditions, click here.

Astro is continuously improving our user interface and introducing new features to our platforms to ensure that your Astro experience is more seamless, efficient and user-friendly.

For details on our latest interface, Picture-in-Picture mode and auto-start interactive mode on Astro GO, please click here.

In addition, we have also recently introduced a new look to the Title Information Page, the ability to disable the Profile Selection Screen and adjustable auto-standby timing. For more information, please click here.

You can proceed with below troubleshooting if the weather is good. Ortherwise, you may try again later.

STEP 1
On your remote, press the “HOME” button and the home menu will be displayed at the bottom of your screen.

STEP 2
Navigate to SETTINGS and press “OK”.

STEP 3
Navigate to STB DIAGNOSTICS and press “OK”.

STEP 4
Refer to the signal strength % shown on the top left of your screen.
If it is 65% or higher, please go to WhatsApp to receive further help.
If it is below 65%, please go to STEP 5.

STEP 5
Switch off the power for your box and make sure that the adapter’s power light is off.

STEP 6
Unscrew the satellite cable from the box and pull it out.

STEP 7
Plug the satellite cable back into the box and screw it back securely.

STEP 8
Switch on the power for your box and make sure that the adapter’s power light is on.
Please wait for 5 minutes.

STEP 9
Turn on your box. You should no longer be experiencing this issue.
If issue persist, please attach a picture of your General tab of the STB Diagnostics for assistance.

Centralized Dish
If issue persist under a centralised satellite dish, please refer to your respective Building Management before contacting our agents.

Please ensure that you are using the correct ID for eKYC submission.

For Malaysians :

1. Please ensure you are using MyKad or MyTentera.

2. Capture the front and back of your ID.

3. Ensure that there is no glare when capturing the photo.

4. Ensure that are capturing it in a bright room to have the highest picture quality.

5. Please do not cover your ID when capturing it, as it may impact the OCR Optical Character Recognition accuracy.

For Malaysian Permanent Resident and Other Nationality :

1. Please use Passport only.

2. Please capture your whole passport, which has your personal information on it and your signature.

3. Ensure that there is no glare when capturing the photo.

4. Please do not cover your ID with your when capturing it, as it may impact the OCR Optical Character Recognition accuracy.

Below are the details of the Sun NXT pricing options for Astro customers.

When you have reached the duration (years) needed for the upgrade, we will upgrade you into your new tier and your shiny new rewards will appear in the My Astro app. You are still eligible for all the rewards from previous tiers too.

Sun NXT offers content in six different languages: Tamil, Telugu, Malayalam, Kannada, Bengali, and Marathi.

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Settings.

STEP 3

Navigate to Network Settings and press "OK".

STEP 4

Navigate to Network Diagnostics and press "OK".

STEP 5

Network Diagnostics screen will be displayed accordingly.