No, there is no additional charges applicable.

Starting 16 February 2024, you may be asked to perform Astro ID verification when you log in to their Astro account on digital platforms such as www.astro.com.my, Astro GO, My Astro etc. This 2-step process encompasses verifying your email address or phone number and re-entering of your existing password.

1. Please standby computer/laptop to access to the internet and connection must be via LAN (cable) [Connect the LAN (cable) to the yellow port in Maxis Router and direct to computer/laptop].

2. You may open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox and etc.

3. On the address bar, please go to http://192.168.1.254 and below page will appear.

If below box appear, please enter required details as below:

USERNAME: Administrator

PASSWORD: (ACCESS KEY AT THE RGW STICKER)

(These are the defaults, if you have done previous configuration on your router the password may be different)

4. Once enter into the page ‘’TECHNICOLOR TG784N V3’’, you may follow below step for the wireless information.

i. Click "Configure”

ii. Once clicked configure button, below screen will appear.

A. This is your current password. Please delete and enter the new password.

B. Once completed the selection; click the "Apply" button. Router will auto reboot and connection re-establish after few minutes.

Please re-connect your wireless using the new password.

Customers with a Netflix Premium account are allowed to watch on up to 4 supported devices in 4K UHD and Netflix Spatial Audio. In addition, Netflix Premium subscribers are also allowed to download shows to watch offline on 6 devices at a time.

If you did not receive the recovery email or verification code, please make sure that:

1. You are entering the correct email address or mobile number you used to register for your Astro ID.
2. Check your junk mailbox or spam folder.

To find out which email or phone number you have used to register your Astro ID, you may submit a feedback form. Kindly select feedback type "I have an enquiry/issue with Apps" choose "Astro GO"

We will get in touch with you within 48 hours to solve your enquirie

Successful payment via JomPAY will be posted real time.

After order submission, the Plug & Play Box and Astro SIM card will be couriered separately to your service address. The delivery dates with the tracking numbers will be communicated via SMS.

The Plug & Play Box and Astro SIM card should arrive within 3-working days after your order submission. You may self-install your box by following the guide here.

Astro X3 Packs are available in two contract options:

1. 12-Month Contract Plan – Customers are required to fulfil a one-time 12-month contract commitment. There is no contract renewal required after contract expiry.
2. No-Contract Plan – Customers who prefer greater flexibility may subscribe to a no-contract option, which will be available from December 2026 onwards.

There are three tax indicators for customers to refer to and they are labelled as such:

• S1 = 8% Service Tax
• S2 = 6% Service Tax
• N = Non-taxable item

Each item in your bill, under the Monthly Charges section will be marked with one of these labels. Example:

S1 Primary Pack
S2 Astro Fibre 50 Mbps

The service tax amount for each item will be indicated right after the itemised list. Tax is calculated based on these indicators and added to your total monthly charges.

The number of concurrent streams depends on your Disney+ subscription plan:

a. Disney+ Standard: Up to 2 concurrent streams

b. Disney+ Premium: Up to 4 concurrent streams

STEP 1
Switch off the power for your box and make sure that the adapter's power light is off.

STEP 2
Locate the Smartcard at the front or right side and gently pull it out make sure that the adapter's power light is off.

STEP 3
Wipe the Smartcard's gold chip clean using a dry soft cloth.

STEP 4
Make sure the gold chip is facing upwards and reinsert it all the way in.

STEP 5
Switch on the power for your box and make sure that the adapter's power light is on. Please wait for 5 minutes.

STEP 6
Turn on your box. You should no longer be experiencing this problem.
If issue persist, please submit the issue in our Feedback Form and attach a picture of your General tab of the STB Diagnostics for assistance.

Although it is possible to pair the second mesh node unit with the first mesh, customers are advised to follow similar steps in setting up the Mesh Network by pairing the mesh unit with the WiFi router instead.

Moving forward, all customers on any Bundle which includes Movies Pack, those with the Movies Add‑On, customers subscribed to the HBO Pack Add‑On, as well as customers on the Astro One Epic Pack who wish to continue enjoying HBO content can subscribe to the HBO Max app as an ala carte add‑on via Astro from RM24.90/month.

Multiroom (Astro Box) requires an Astro box to be set up and can be accessed through the regular satellite feed or streaming on home Wi-Fi. Meanwhile, the Multiroom (Smart TV) only requires a Smart TV and no installation is needed. Customers can download the Astro Smart TV app on the Smart TV to stream.

Mesh WiFi network refers to a unified wireless network that is formed by utilizing inter-connected WiFi nodes (Mesh devices) placed throughout the house.

No, please return your old Astro Fibre modem and its power supply unit (PSU). There will be no penalty fees if the cable is damaged or lost.

No, you are still able to subscribe to iQIYI on your current Astro pack.

You can recover your Netflix login here or at astro.com.my/Netflix

Step 1: Head to astro.com.my/Netflix

Step 2: At the FAQ section look for "How to recover my Netflix login email and password

STEP 1

Press "HOME" button on your remote control.

STEP 2

Navigate to Settings and press "OK".

STEP 3

Navigate to Digital Audio and press "OK".

STEP 4

Choose your preferred selection and press “OK”.

STEP 5

Select Yes, continue and press "OK" to confirm on the changes.

Otherwise, select No, go back to cancel.

You will be required to verify your account once when you register your Astro ID or when you reset your password. This can be done either on the My Astro website or the My Astro app. The steps are simple:

• Step 1: Log in using your email address or mobile number and password

• Step 2: Enter the verification code sent to your registered email or mobile number

• Step 3: Re-enter your password to confirm your Astro ID

• Step 4: Verification is complete! You can now log in to your Astro account and access apps like Astro GO and My Astro

You can use your existing Prime Video account to access Prime Video on the Ultra/Ulti Box however, if you would like to enjoy the Prime Video for 2 months without additional cost, you may register with a new mobile number/email address. Alternatively, you can activate the 2-month access period using the same mobile number or email address associated with your Prime Video account after your current subscription ends, anytime between 24 April 2025 and 23 June 2025.

You can cancel your WeTV VIP subscription via WeTV’s official website or mobile app.

Kindly note that we will not be able to offer a refund if you do decide to leave the WeTV app before your subscription period ends.

You may manage your Multiroom (Smart TV) subscription via My Astro app. Download here or on your App Store or Google Play Store.

Yes, you will enjoy an Ulti box when subscribing to Primary/Entertainment/ Movie Pack OR an Ultra box when subscribing to Sports/Sports+/Movies+/Premium 1/Premium 2/Premium 3/Platinum Pack.

You will get FREE installation for both Ultra/Ulti box upon signing up with Astro & Broadband.

Effective from the bill date 9th July 2024 onwards, the Service Tax for the Broadband Bundle/Fibre Bundle will be streamlined at a rate of 6%. The prorated adjustment for your Pay TV subscription will be calculated based on 6% service tax rate on your next bill, following your current subscription's tax rate.

If you see this message, it means your Astro account has reached the maximum number of devices allowed for registration.
Please perform the following checks and troubleshooting steps:

1. Manage Your Registered Devices

• Go to www.astrogo.com.my or open the Astro GO app.
• Log in using your Astro ID and password.
• Review the list of registered devices.
• Remove a device that you no longer use.
• Return to your new device and try signing in again.

If you are unable to remove a device or continue to see the error message, proceed to submit report via WhatsApp or Feedback Form and provide:

• Astro ID use
• Smart TV model
• OS version
• Error reported on device

This will help our support team investigate and assist you further.

Note: Please be aware that only one Smart TV device is allowed per account at any point in time.

Want to return your Ultra or Ulti Plug & Play Box? It's simple and free!

Here's what you can do with your unused Ultra/Ulti Plug & Play Box:

1. Return your device to us via Arranged Pick-up:

Step 1: Please call Astro's Contact Centre at 03-9543 3838 to schedule an arranged pick-up by one of our courier partners.

Step 2: Just sit back and relax! A courier agent will come to your doorstep to retrieve the devices.

Astro One Packs are as follows:

The Astro One: Entertainment Pack for a wide range of favourite vernacular entertainment, including the best Malay, Korean, Chinese, Indian, Kids and international shows enjoyed by Malaysian families.

A sports-filled fiesta with Astro One: Sports Pack that comes with all our Sports channels, on top of what is on the Entertainment pack.

Astro One: Epic Pack, an indulgence for those who want it all. Adding on to the Entertainment pack and Sports pack, this unrivalled streaming experience will include the best from their favourite streaming apps, all on a single platform.

For more information, visit www.astro.com.my

Slow browsing using LAN cable

Looks like there is something wrong with your service connection.

Please run the Speed Test and attach the picture or screenshot of the speed test in the Feedback Form below, in order for us to provide further assistances.

Click here for Speed Test guideline.


Slow browsing using LAN cable

Looks like there is something wrong with your service connection.

Please run the Speed Test and attach the picture or screenshot of the speed test in the Feedback Form below, in order for us to provide further assistances.

Click here for Speed Test guideline.

Quick Info
A Speedtest is a service that provides free analysis of Internet access parameters, such as connection data rate.

Slow browsing using Wi-Fi

1. Router Positioning

Most people underestimate the importance of picking a good spot for a Wi-Fi router. Even a small shift in positioning could end up being the difference between day and night.

i) High vs. Low

Put the router as high up as possible to extend the broadcasting range of the radio waves. This also helps clear the router of possible interferences.

ii) Concrete & Metals

Make sure your router isn't blocked by any other objects, especially devices that are electronic. Also, avoid placing your router in your basement as this area is usually enclosed by a lot of concrete, which can be almost impossible for Wi-Fi signals to penetrate.

iii) Distance to Router

The further away from your router you get, the weaker the Wi-Fi signal. Therefore, the best option is to place your router as close to your devices as possible, but this is only practical if you have one main area where you tend to use your devices.

Otherwise, you should place your router near the center of your home. After all, Wi-Fi broadcasts in 360 degrees, so it doesn't make sense to put it at one end of the house.

2. Wireless Interference & Noise

You've probably never noticed but there are wireless signals all around you wherever you go and they're passing through you all the time. From where? Electronic devices, Wi-Fi routers, satellites, cell towers, and more.

Although Wi-Fi is supposed to be on a different frequency than most of these devices, the amount of radio noise can still cause interference. Some common causes of interference include:

• Microwaves
• Bluetooth Devices
• Cordless Phone

3. Surrounding Wi-Fi signals

A truth of the modern world is that every household has their own Wi-Fi network, which can cause issues with channel overlap. This can be somewhat problematic in a townhouse, but is especially problematic in housing complexes and apartments where there can be many routers within close proximity.

Which is why it's important that you pick a good channel in your router settings. Modern routers can choose channels for you automatically, but sometimes it's better to investigate and find the best channel yourself.

4. Usage

More likely, however, is that the people on your network such as friends, roommates, or family members are participating in bandwidth-heavy activities like gaming and streaming Ultra box/ Netflix.

Fortunately, if this is the case, you can prioritize your own network traffic by enabling Quality of Service in your router settings.

If the problem persists, please run a Ping Test, Traceroute Test and attach the picture or screenshot of both test results in the Feedback Form below, in order for us to provide further assistances.

Please make sure to attach the required screenshot(s) in ONE file (i.e. Microsoft Word document, PDF, Image file) before submitting the form.

Quick Info
A Speedtest is a service that provides free analysis of Internet access parameters, such as connection data rate.
A Ping Test shows how long it takes for packets to reach host.
A Traceroute Test traces the route of packets to destination host from our server.

Yes, you may return Astro equipment even after being charged for the box fee.
Please contact Astro to schedule for equipment collection. A courier partner agent or installer will call for the collection.

After successfully returning the box, Astro will proceed to waive off the box fee within 30 days from the confirmation date of the returned items to our Astro warehouse.

Customers who have activated the trial will be notified before it expires. They can choose to continue by subscribing at a price that will be disclosed later. If they are not interested, the trial will automatically expire after 2 months with no action required from them. Your Prime Video access will auto-expire, and you won’t be charged. However, please visit

https://product.astro.com.my/apps/primevideo

to stay updated on Prime Video.

Unfortunately, downloading of content is not a feature that is currently available.

Yes, you will need to activate SecureGo again.

You can proceed with below BTS if the weather is good. Otherwise, you may try again later.

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to SETTINGS.

STEP 3

Navigate to Satellite Settings and press “OK”.

STEP 4

Navigate to Diagnostics and press “OK”.

STEP 5

Refer to the signal strength on your screen.

If it is 65 or higher, please take the screenshot and submit your feedback form.

If it is below 65, please go to Step 6.

STEP 6

Switch off the power for your box and make sure that the adapter’s power light is off.

STEP 7

Unscrew the satellite cable from the box and pull it out.

STEP 8

Plug the satellite cable back into the box and screw it back securely.

STEP 9

Switch on the power for your box and make sure that the adapter’s power light is on. Please wait for 5 minutes.

STEP 10

Turn on your box. You should no longer be experiencing this issue.

If issue persist, please submit the issue on our Feedback Form with error details and attach a picture of your General tab of the STB Diagnostics for assistance.

Centralized Dish

If issue persist under a centralized satellite dish, please refer to your respective Building Management before contacting our agents.

Yes. You can activate your access anytime between 24 April 2025 – 23 June 2025 to get 2 months access to Prime Video at no additional charge.

You can proceed with below troubleshooting if the weather is good. Ortherwise, you may try again later.

STEP 1
On your remote, press the “HOME” button and the home menu will be displayed at the bottom of your screen.

STEP 2
Navigate to SETTINGS and press “OK”.

STEP 3
Navigate to STB DIAGNOSTICS and press “OK”.

STEP 4
Refer to the signal strength % shown on the top left of your screen.
If it is 65% or higher, please go to WhatsApp to receive further help.
If it is below 65%, please go to STEP 5.

STEP 5
Switch off the power for your box and make sure that the adapter’s power light is off.

STEP 6
Unscrew the satellite cable from the box and pull it out.

STEP 7
Plug the satellite cable back into the box and screw it back securely.

STEP 8
Switch on the power for your box and make sure that the adapter’s power light is on.
Please wait for 5 minutes.

STEP 9
Turn on your box. You should no longer be experiencing this issue.
If issue persist, please attach a picture of your General tab of the STB Diagnostics for assistance.

Centralized Dish
If issue persist under a centralised satellite dish, please refer to your respective Building Management before contacting our agents.

STEP 1

Press "HOME" button on your remote control.

STEP 2

Navigate to Settings and press "OK".

STEP 3

Navigate to Display and press "OK".

STEP 4

Navigate to TV Settings and press "OK".

STEP 5

Navigate to Conversion for 4:3 Input Video, select your preferred selection and press “OK”.

STEP 6

Select Yes, continue and press "OK" to confirm on the changes.

Otherwise, select No, go back to cancel.

1. Open/Download the My Astro app or visit My Astro web.

2. Login with your Astro ID.

3. Go to Account.

4. Under Billing, tap on e-Invoice.

5. Toggle the button to enable the e-Invoice, fill in the require details and tap 'Submit'.

6. Tap 'Confirm'.

7. Select 'Approve' to update e-invoice.

8. A successful notification will be displayed.

Please ensure that you have subscribed to the mentioned channel.
If you're subscribed to this channel, follow below steps.

STEP 1
You need to refresh the signal on your box.
Refer to Refresh signal of your box guide.

STEP 2
If issue persist after 30 minutes, proceed to submit report via WhatsApp or Feedback Form.

For any NJOI-related information, please visit the NJOI Help & Support page at

https://purchase.njoi.com.my/en-support

For customers with the Ultra or Ulti Box, you will be charged a fee of RM100 (not inclusive of Govt. tax) upon confirmation of lost Astro Box and Smart Card/SIM Card.

For lost Smart Card/SIM card only, you may be charged RM50 to obtain a replacement.

You can access your ZEE5 Premium account on up to five (5) devices at a time, including your Ultra/Ulti Box. To ensure a smoother streaming experience, please sign out from any unused devices.

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Settings.

STEP 3

Navigate to S/PDIF Audio and press "OK".

STEP 4

Navigate to your preferred selection and press “OK”.

TVBAnywhere+ is the global streaming app from Television Broadcasts Limited (TVB) and is available as an add on for all Astro customers. It offers a vast library of over 40,000 hours of Chinese entertainment, including the latest drama series, variety shows, evergreen classics, and unlimited TVB originals. Customers can enjoy these shows anytime, anywhere.

Key features include:

• Up to two concurrent streams per account
• Watch on the big screen via Astro’s Ultra/Ulti Box, Android TVs, and selected Samsung and LG Smart TVs.
• Subtitles and dubbing in multiple languages: major dramas are available in Traditional Chinese, Simplified Chinese, English, Bahasa Malaysia and Bahasa Indonesia.

No, there are no installation or activation fees for Astro X3, as these plans do not require a set-top box or installation. Once your sign-up is complete, you can start streaming Astro content immediately via the Astro app on your Smart TV or through Astro GO on supported devices.

Astro X3 packs offer a new way to enjoy Astro — without the need for a set-top box or satellite dish, giving you a simpler and more flexible way to watch your favourite content. With no box required, you can start streaming your favourite entertainment shows and live sports instantly via the Astro app on selected Smart TVs and personal devices such as smartphones, tablets, and laptops — anytime, anywhere. And with just a 12-month contract, these plans offer greater flexibility while delivering the same breadth of content you enjoy with Astro.

You can choose from two flexible 12-month options, depending on your viewing preferences:

• Astro X3: Entertainment 12 Pack – for a wide range of entertainment content
• Astro X3: Sports 12 Pack – for live sports and comprehensive coverage

*No-contract options will be available from December 2026.

The Astro X3 packs are available to both new and existing Astro customers, making it easier for customers to enjoy a fully digital viewing experience. For existing Astro customers, subscribing to an Astro X3 pack under a 12-month contract will be treated as a new subscription, and a separate account will be created.

To manage this subscription, customers will need to register a new Astro ID using a new email address. This ensures a smooth and seamless self-service experience, with each subscription managed independently.

Astro Quick Pay is a convenient method to check your Bill Summary, Account Status and pay Astro bills at your convenience with immediate payment posting, right from home.

However, you can only pay your latest bill via Astro Quick Pay.

If you want to view all your payment history, download bill statements, and pay easily all in one place, you can download the My Astro app.

Please refer to these FAQs for more information, or click here to learn more and sign up for the Ultra Box. Alternatively, you may call 03-7481 8000 to get in touch with an Astro representative.

You will be able to view your new package(s) within 24 hours of subscribing. Please note that if you are an Astro customer subscribing to HD channels, you will have to connect an HDMI cable to your TV before you will be able to enjoy the channels.