Intermittent internet connection using LAN cable

Looks like there is something wrong with your service connection.

Please run a Ping Test, Traceroute Test and attach the picture or screenshot of both test results in the Feedback Form below, in order for us to provide further assistances.

Please ensure to attach the required screenshot(s) in ONE file (i.e. Microsoft Word document, PDF, Image file) before submitting the form.

Intermittent internet connection using Wi-Fi
1. Router Positioning

Most people underestimate the importance of picking a good spot for a Wi-Fi router. Even a small shift in positioning could end up being the difference between day  and night.

  i) High vs. Low

     Put the router as high up as possible to extend the broadcasting range of the radio waves. This also helps clear the router of possible interferences.

  ii) Concrete & Metals

      Make sure your router isn't blocked by any other objects, especially devices that are electronic. Also,       avoid placing your router in your basement as this area is usually enclosed by a lot of concrete, which       can be almost impossible for Wi-Fi signals to penetrate.

  iii) Distance to Router

      The further away from your router you get, the weaker the Wi-Fi signal. Therefore, the best option is to place your router as close to your devices as possible, but this is only practical if you have one main area where you tend to use your devices.

Otherwise, you should place your  router near the center of your home. After all, Wi-Fi broadcasts in 360 degrees, so it doesn't make sense to put it at one end of the house.

2. Wireless Interference & Noise

You've probably never  noticed but there are wireless signals all around you wherever you go and  they're passing through you all the time. From where? Electronic devices,  Wi-Fi routers, satellites, cell towers, and more.

Although Wi-Fi is supposed to be on a different frequency than most of these devices, the amount of radio noise can still cause interference. Some common causes of interference include:

i) Microwaves
ii) Bluetooth Devices
iii) Cordless Phone

3.  Surrounding Wi-Fi signals

A truth of the modern world is that every household has their own Wi-Fi network, which can cause issues with channel overlap. This can be somewhat problematic in a townhouse, but is especially  problematic in housing complexes and apartments where there can be many routers within close proximity.

Which is why it's important that you pick  a good channel in your router settings. Modern routers can choose channels for you automatically, but sometimes it's better to investigate and find the best channel yourself.

4. Usage

More likely, however, is that the people  on your network such as friends, roommates, or family members are participating in bandwidth-heavy activities like gaming and streaming Ultrabox/ Netflix.

Fortunately, if this is the case, you can prioritize your own network traffic by enabling Quality of Service in  your router settings.

If the problem persists, please run a Ping Test, Traceroute Test and attach the picture or screenshot of both test results in the Feedback Form below, in order for us to provide further assistances.

Please make sure to attach the required screenshot(s) in ONE file (i.e. Microsoft Word document,  PDF, Image file) before submitting the form.

Quick Info
A Ping Test shows how long it takes for packets to reach host.
A Traceroute Test traces the route of packets to destination host from our server.

STEP 1    

Switch on the power for your box and make sure that the adapter's power light is on.

STEP 2    

Put the box on standby mode.

STEP 3    

Press and hold the Home button on the box.

STEP 4    

Wait until "boot" appear on the front panel and released.

STEP 5    

New Installation Settings page will appear.    

Click here for the guides to complete the setup.

STEP 1    

Switch off the power of your box and ensure the adapter�s power light is off.

STEP 2    

Switch on the power of your box and ensure the adapter�s power light is on.

STEP 3    

Press and hold the Ch+ and Ch- keys on the box simultaneously when the "boot" message appears on the front panel.

STEP 4    

Wait until the "Clr" message appears on the front panel, then release the Ch+ and Ch- keys.

STEP 5    

New Installation Settings page will appear.    

Click here for the guides to complete the setup.

STEP 1    

Ensure your box is on standby mode. (Red light on box's front panel).

STEP 2    

Press and hold the Standby button. Wait until the LED at front panel change from red to green for 3 times, then release the button.

STEP 3    

New Installation Settings page will appear.    

Click here for the guides to complete the setup.

STEP 1    

Switch off the power of your box and ensure that the adapter�s power light is off.

STEP 2    

Switch on the power of your box and ensure that the adapter's power light is on.

STEP 3    

Keep pressing the 'Power' button until the Startup Option screen appears.

STEP 4    

Press "369" on the remote control to trigger refresh box setting menu.

STEP 5    

Press "OK" to proceed. The box will be refreshed to the original setting.

STEP 6    

New Installation Settings page will appear.    

Click here for the guides to complete the setup.

If you sign up Astro & Broadband with standard Ultra & Ulti box (DBB), all channels are available.  

However, there are channels that will not be available with Ultra/Ulti Plug & Play Box which are NHK World (398).

Astro GO+ is a service add-on that: 

• Enables the simultaneous viewing of Astro GO for up to 4 users/devices. 
• Increases the cloud recording storage from 200 hours up to 1500 hours. 

Please check SMS received on the unsuccessful payment status and should you require further clarification contact your issuing bank for clarification or contact us via WhatsApp.

No, you are still able to access HBO Go on your current Movies pack.

You may call Astro's Contact Centre at 03-9543 3838 or wait for an Astro representative to be in contact with you within 2 working days to assist you with your order.

Yes, starting 9 November 2021, these new packs will be Astro's default offering.

STEP 1
On your remote, press the Home button and the home menu will be displayed on your screen.



STEP 2
Navigate to Profile.



STEP 3
The Profile Selection Screen will be displayed.



STEP 4
Navigate to Add Profile.



STEP 5
Choose your Profile.



STEP 6
Input the Profile Name and navigate to DONE.



STEP 7
Choose the Age Group of the new profile and press "OK".



STEP 8
Your new profile will be shown in the Profile Selection Screen.

No, Astro Fibre is only available for a 24-month contract period upon sign-up.

STEP 1

Check on the adapter's power light.

If the adapter's power light is ON, please refer to Blank Screen troubleshooting steps here.

Otherwise, if the adapter's power light is OFF, switch off the power for your box.

STEP 2

Ensure power cable is connected tightly.

Plug in power cable to different power socket and switch on the plug.

You should no longer be experiencing this problem.

If issue remains, proceed to STEP 3.

STEP 3

Try a different power socket to connect the equipment.

Turn on the power socket and check the adapter's power light.

If there is no light on your power adaptor's, please submit the issue on our Feedback Form with error details and provide your sim card number for assistance.

Please indicate in the form if any lightning strike/thunderstorm/power trip occurred.

1. Tune to channel 200 on your Astro box and wait for a few seconds. By default, the selector will be on Packs. Press up/down to select your preferable pack, and press "OK"

2. Select the option for Monthly Subscription

3. Send the WhatsApp code as per displayed on the TV screen

You will only be able to watch Astro GO and/or Multiroom Smart TV on up to 2 devices at the same time as opposed to 4 devices with Astro GO+. 

Your cloud recording storage will also decrease from 1500 hours down to 200 hours. Your stored recordings/downloaded shows that exceed 200 hours will also be removed. 

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Settings.

STEP 3

Navigate to Satellite Settings and press “OK”.

STEP 4

Navigate to LNB Setup and press “OK”.

STEP 5

Tuner Settings screen will be displayed accordingly.

STEP 6

Select LNB Type connected to your box.

STEP 7

Navigate to Next and press "OK" to confirm your selection.

STEP 8

Select this as the Entry Point and press "OK"  to confirm your selection.

STEP 9

Navigate to Next and press "OK" to confirm your selection.

STEP 10

Signal reading results for Tuner 1 screen will be displayed accordingly.

Press right to navigate to Tuner 2.

STEP 11

Signal reading results screen for Tuner 2 will be displayed.

Then navigate to Finish and press "OK" to complete the setup.

You will be contacted by Astro via SMS/call at the end of your 24 months speed upgrade period. Customers who choose to remain the upgraded speed after 24 months will be charged as per the monthly subscription fee of the upgraded speed plan from the next month onwards and customers who choose to downgrade to their initial subscribed speed plan will not be charged any additional fees.
 
Situation 1:
Customer is subscribed to the 50Mbps Astro Fibre plan and is entitled to receive a free 100Mbps speed upgrade for 24 months. If the customer chooses to downgrade back to 50Mbps at the end of the 24-month period, no additional charges will apply.
 
Situation 2:
Customer is subscribed to the 100Mbps Astro Fibre plan and is entitled to receive a free 500Mbps speed upgrade for 24 months at RM129/month. If the customer chooses to remain with the upgraded speed of 500Mbps at the end of the 24-month period, they will be charged RM189/month* from the 25th month onwards.
 
*This price might differ depending on the offer or promotion
 

No, if you already have an Ulti box you will not be required to swap the box to enjoy the new packs. However, if you would like to access 4K UHD content, you may upgrade to Ultra Box. Installation and activation fees will be chargeable depending on your package selection.

Yes, you can go to "Account' and scroll to "Subscription' and select TV pack. You may reach out to us via WhatsApp at 03-9543 3838 for more details.

No, the Astro Fibre App is a free mobile application for all Astro Fibre customers with the latest RG21 router.

The new packs come with 200 hours of Cloud recording by default. If your current recordings exceed 200 hours, the system will delete the exceeded hours once your package has been changed, starting with the oldest recordings first.  

If you would like to retain the previous recordings which exceed 200 hours, you may opt for a selection of 400 or 1500 Cloud Recording hours at a chargeable rate of RM12 or RM15 per month (excl. govt tax) respectively. Or else, you may subscribe to the Platinum pack which comes with complimentary access to 1500 hours of Cloud Recording.

For TV packs only, 24-months contract commitment period. However, if in addition to the TV packs, if you would like to also sign-up for Broadband, the contract commitment will be 24 months as well. If you're an existing customer, your existing remaining contract duration (if any) will not be carried over to the new contract except for existing Disney+ Hotstar (3 Months Pack) and Multiroom subscription contract durations which will be carried over upon the migration to new packs.

Note: If you are subscribing to a bundle pack which includes Netflix or Disney+ Hotstar for the first time, you are required to maintain the respective app as part of your bundle selection for a minimum of 12 months, otherwise a cancellation fee will apply.

Yes, you may cancel your Astro Fibre order before service activation, however, kindly note that there is a cancellation charge of RM212 (inclusive of SST) for any service cancellation done 48 hrs before scheduled appointment.

Your existing contracts and corresponding rewards including but not limited to discounts/rebates will be removed with no penalty applied and replaced with the new contracts associated with the new packs. Exception applies to Disney+ Hotstar (3-Month Pack) and Multiroom campaigns in which remaining contract durations will be brought over if the subscription is continued or penalty will be applied upon discontinuation of said subscriptions.

You are attempting to play a content that is not part of your subscription. If you are not able to play a content that you are subscribed to, proceed to submit report via WhatsApp or Feedback Form.

The fee is a one-time activation fee that will be charged when you subscribe to the Plug & Play Box.

We want to ensure that only the authorised account owner can have access to their Astro account. This activity ensures that only you can log in and access all the details tied to your Astro account.

Refund can only be made by the registered Astro account holders.

However, if you would like to request refunds on behalf of the account holder, you may do so by providing the supporting documents (e.g.: authorization  letter, death certificate, 3rd party NRIC copy).

To check your contract, please visit My Astro.

Upon submitting your application, you will receive the eKYC link via SMS/email/astro.com.my to complete the eKYC verification within 3 days.

(i) Head over to My Astro Portal and go to 'Bill & Payment'. Click on 'Payment History'
(ii) Contact us via one of these platforms. Please ensure you include your Astro Account Number.

1. Ensure power cable is connected tightly.

2. Try to use another power socket / power source to eliminate faulty power sockets/power sources which  could cause the issue.

3. If the issue persists, submit your feedback form for further assistance.

Your bill statement will include details of your monthly subscription charges; e.g. charges for your chosen Astro packages and Broadband service. It will also show the time period of which your first bill will cover, as well as indicate how much the total charges are and when the payment due date is.

For customers whose sign-up speed is 50Mbps, 100Mbps or 500Mbps, you will get to enjoy your upgraded speed of 100Mbps/500Mbps/800Mbps for 24 months.
 

Do ensure that you are logging in with the correct Astro ID and password. If you are still unable to remember your password, please proceed to use the “forgot password” function to reset your password.  
 

If the issue persists, you may submit an enquiry through our feedback form here. Choose feedback type as “Technical issues” and the issue as “I have an enquiry/issue with Apps.” Then, select the app you’re having trouble logging into, and submit the form. We will get in touch with you within 48 hours.

Kindly note that you will need to link yourAstro ID with an active Astro subscription to use Astro GO, My Astro, and other partner apps that is included in your subscription. You may refer to the steps here on how to do this.

STEP 1
Check on the adapter's power light.
If the adapter's power light is ON, please refer to Blank Screen troubleshooting steps here.
Otherwise, if the adapter's power light  is OFF, switch off the power for your box.

STEP 2
Ensure power cable is connected tightly.
Plug in power cable to different power socket and switch on the plug.
You should no longer be experiencing this  problem.
If issue remains, proceed to STEP 3.

STEP 3
Try a different power socket to connect the equipment.
Turn on the power socket and check the adapter's power light.

If there is no light on your power adaptor's, please submit the issue on our Feedback Form and attach a picture of your smart card number for assistance.
Please indicate in the form if any lightning strike/thunderstorm/power trip occurred.

Disney+ Hotstar is available on Chromecast (Gen 2 onwards, firmware 1.43 & above) and with the latest version of the Disney+ Hotstar app on iPhone, iPad and Android mobile. 

Follow these instructions to cast your film/series: 

• Make sure your mobile device and your Chromecast are on the same WiFi network 
• Log into your Disney+ Hotstar app 
• Select a film/series that you want to cast 
• Press "Play' 
• Once the film/series has started, tap on the casting icon 
• Select the screen you wish to cast to 
• The film/series should then be cast onto your screen