STEP 1

Try to change channels on your Astro remote. Check the LED light.
If the LED is blinking 3 times or if it is not blinking, replace the batteries and proceed to STEP 2.
Otherwise, if the LED is blinking 1 time, your remote is working fine, let's proceed to STEP 3.

STEP 2

Check if you can change channels using your Astro remote control. You should no longer be experiencing this problem if is a battery issue.
If issue remain after batteries replacement, proceed to STEP 3.

STEP 3

You need to refresh the box setting manually from the box front panel.
Refer to Refresh Box setting (Clear NVRAM) - Ultra / Ulti Box.
If issue persist, please submit the issue on our Feedback Form.

Please contact your issuing bank to enable card-not-present (CNP) transactions. This security measure helps us to protect your card information from being misused in fraudulent transactions.

If you can’t remember the email address or mobile number linked to your Disney+ account, please WhatsApp or call Astro’s Customer Service at +603 9543 3838.

You will be able to access Netflix on your Ultra and Ulti Box. However, kindly note that if you have an Ulti Box with a Netflix Premium subscription, you will not be able to watch content in 4K UHD and Netflix Spatial Audio.

This error indicates that you are streaming on Astro GO while being connected to a VPN. Please close your VPN application and try streaming again.

If you are still having issues, proceed to submit report via WhatsApp or Feedback Form.

Download the iQIYI app > Select "Profile" > Click on "Log in with Astro ID" > Click on "Do not have an Astro ID? Click here".

The minimum recommended internet speed is 10 Mbps for HD videos and 30 Mbps for 4K UHD videos.

You will be able to watch almost immediately while the content streams through your Astro Box. Buffer time for the video to load will depend on the speed of your broadband.

Upon submitting your application, you will receive the eKYC link via SMS/email/astro.com.my to complete the eKYC verification within 3 days.

We would highly recommend for you to pre-pack your Astro Box equipment before taking it to our courier partner branch. However, if you unable to pre-pack the Astro Box, you can bring the equipment to the nearest courier partner branch for assistance.

Your documents will be handled in compliance with standards set by PDPA (Personal Data Protection Act 2010) and will not be used for other means without your specific consent.

You can cancel your WeTV VIP subscription via WeTV’s official website or mobile app.

Kindly note that we will not be able to offer a refund if you do decide to leave the WeTV app before your subscription period ends.

All existing or new Astro customers who meet the following criteria may upgrade to the Ultra Box:

1. Have an internet connection at home (recommended>10Mbps speed)
2. Maintain a minimum subscription with a HD + Recording service

If you live in a high-rise building, please call us at 03- 7481 8000 to check if your building can support the Ultra Box. If your high-rise building allows for the set-up of individual dishes you will be able to upgrade to the Ultra Box, subject to the criteria above.

If you would like to access our 4K UHD content via the Astro UHD channel 805 and UHD content on VOD, Astro Best and Astro First. We also recommend:

1. 4K UHD supported TV that is HDCP2.2 compliant
2. Internet connection of at least 30Mbps

Note: If you do not have an internet connection at home, you may take up the Ultra Box bundled with Astro™'s broadband package with rebates of up to RM30/month. For more details and to sign up for Astro & Broadband, please click here.

Want to return your Ultra or Ulti Plug & Play Box? It's simple and free!

Here's what you can do with your unused Ultra/Ulti Plug & Play Box:

1. Return your device to us via Arranged Pick-up:

Step 1: Please call Astro's Contact Centre at 03-9543 3838 to schedule an arranged pick-up by one of our courier partners.

Step 2: Just sit back and relax! A courier agent will come to your doorstep to retrieve the devices.

For Ultra/Ulti Plug & Play Box installation, it is recommended that you attempt to self-install by following the installation guide here, but there is an option to request for an installer to install the box at your premise. However, there will be a separate fee for this service request.

Prime Video is available as an add-on to all Astro customers at RM25 per month (tax included). However, Prime Video is available to the following Astro customers at no additional cost:

• Customers on the Ultra/Ulti Box with either the Astro One Epic Pack or Movies Pack as part of their subscription bundle.
• Customers not on the Ultra/Ulti Box but subscribed to either the Astro One Epic Pack or the Movies Pack as part of their subscription bundle, starting 24 June 2025.

If the Astro Smart TV app crashes on your Smart TV, please follow the steps below:

1. Clear the App Cache

• Clear the Astro Smart TV application cache on your Smart TV.
• Once completed, relaunch the Astro Smart TV app.
• Check if the issue has been resolved.

2. Reinstall the Astro Smart TV App

• Uninstall the Astro Smart TV app from your Smart TV.
• Download and install the latest version of the Astro app from your TV's app store.
• Launch the app after installation.
• Try playing content again to verify whether the issue has been resolved.

If the app continues to crash after completing the above steps, proceed to submit report via WhatsApp or Feedback Form and provide:

• Astro ID use
• Smart TV model
• OS version
• Details of the content being played when the crash occurs

This will help our support team investigate and assist you further.

At this point in time, the Disney+ app on Astro Ultra and Ulti Box does not support Dolby audio. We are working to enable this in a future update.

You can have up to five (5) devices registered to your account at any given time. However, you can only stream from one (1) device at a time.

Please ensure that you have subscribed to the mentioned channel.
If you're subscribed to this channel, follow below steps.

STEP 1
You need to refresh the signal on your box.
Refer to Refresh signal of your box guide.

STEP 2
If issue persist after 30 minutes, proceed to submit report via WhatsApp or Feedback Form.

Watch this video or follow below steps to refresh signal of your Astro box

OR

Please ensure to put your box on standby mode to refresh the signal.

The fastest way is via My Astro:

1. Open/Download the My Astro app or visit My Astro web
2. Login with your Astro ID
3. Go to Account
4. Tap on Subscription or TV pack
5. Tap on Rooms
6. For the box that you would like to refresh the smartcard, tap on 'Refresh box' button. This will refresh your Astro box signal

OR

WhatsApp
1. Message 'Hi' to us at 03-9543 3838
2. Click on Tap Here for Options
3. Select Help & Support
4. Type Refresh Astro Box Signal

-
📡 Experiencing technical issues?

📱 Download the My Astro app to:
- Perform self-troubleshoot
- Solve in a few minutes
- No need to call customer service

Multiroom (Smart TV) is a secondary subscription that allows you to enjoy your favourite Astro shows instantly in different rooms at the same time on your Astro Smart TV app. Subscribe to Multiroom (Smart TV) at a promotional price of RM14.99 per month (excl. any govt. tax), and simply download the Astro Smart TV app on your second TV screen to stream.

For first‑time access, logging in or signing up for Netflix before the service is fully activated may result in double charging if Netflix is activated separately using your credit card.
If you’re having trouble watching Netflix, please check the following:

1. Ensure your Ultra / Ulti Box is connected to the internet
2. Restart your Ultra / Ulti Box and try accessing Netflix again

Note: If the issue persists, please contact us for further assistance.
You may also access Netflix directly via the Netflix app on your TV, if available.

If you have a random Astro power cable, remote control or old box lying around at home, you are required to discard them only at registered collection centres for proper handling and management of e-waste in an environmentally sound manner. Click here to find a registered collection centre near you.

For all recycling-related questions, please click here.

The Astro Fibre App is supported on all iOS devices version 16 or later and Android devices version 9 or later. To download the app, you may visit your mobile app store and search for “Astro Fibre App”. Alternatively, you may install the app on your mobile device by clicking here (Google Play Store) or here (iOS App Store).

Any termination within contract period will be subjected to an Early Termination Fee (ETF).

If you encounter this message while using the Astro app on your Smart TV, please follow the steps below:

1. Update Your Smart TV Software

• Ensure your Smart TV is running the latest software or firmware version.
• Check for available updates in your TV's Settings menu and install them if available.

2. Restart Your Devices

• Turn off and restart the following devices:

• Router
• Modem (if applicable)
• Smart TV

• Wait a few minutes for the internet connection to stabilize.
• Launch the Astro Smart TV app again and test the playback.

3. Clear the Astro App Cache

• Clear the application cache on your Smart TV.
• Once completed, reopen the Astro app and check if the issue persists.

4. Reinstall the Astro App

• Uninstall the Astro app from your Smart TV.
• Download and install the latest version from your TV's app store.
• Open the app and test the playback again.

If you are still having issues, proceed to submit report via WhatsApp or Feedback Form and provide:

• Astro ID use
• Smart TV model
• OS version
• Type of internet connection (Wi‑Fi or LAN)
• Screenshot/photo of the error message

This will help our support team investigate and assist you further.

You will not be able to switch between channels, use the app as a remote control, view favorite channels and programmes, use programme showtime reminder, and remote record feature.

Mesh WiFi technology greatly improves the WiFi network coverage within your home and virtually eliminates all WiFi “dead spots”. However, like all technologies there are limitations that you should be aware of.

The pairing of Mesh unit to the WiFi router is automatically handled between the WiFi router and the Mesh unit after it calculates its current position in relation to the WiFi router and surrounding Mesh unit (if available) already connected to the WiFi router.

If you are self-installing the mesh at your house, it is advisable for you to always pair the Mesh unit(s) with the WiFi router only regardless of how many Mesh unit available at your house.

Please note that if you have a Mesh connected to another Mesh, the expected performance of the WiFi speed will not perform as optimally as when compared to a Mesh connected directly to the WiFi router. Adding more points (also referred as Number of hops) in between your device to the WiFi router which will cause a reduction in bandwidth and add latency.

You can get your TIN from the

MyTax Portal

or visit the nearest IRBM branch.

Bahasa Malaysia (BM) and Traditional Chinese subtitles will be available where rights permit. However, subtitle availability may vary depending on the title.

Yes, you may submit for the termination of account, but it is subjected to an Early Termination Fee (ETF) based on the remaining contract.

If you see the error message "There is No Internet Connection" while using the Astro app on your Smart TV, please follow these troubleshooting steps:

1. Check Your Internet Connection

• Confirm whether your Smart TV is connected to the internet via Wi-Fi or a LAN (Ethernet) cable.

2. Check the LAN Cable Connection (if using Ethernet)

• Ensure the LAN cable is securely connected from the router's LAN port to the TV's LAN port.
• Verify that the LED indicator lights on both the router and TV network port are active.

3. Test the LAN Cable

• Connect the same LAN cable to another device (for example, a laptop or another Smart TV).
• Check whether the device can access the internet to confirm the cable is functioning properly.

4. Reconnect to Wi-Fi (if using Wi-Fi)

• Go to your TV's network settings.
• Select your home Wi-Fi network and choose Forget Network.
• Reconnect to the Wi-Fi network by entering the password again.

5. Check Other Devices

• Verify that other devices in your home (such as smartphones, tablets, or laptops) can connect to the same Wi-Fi network.
• If all devices are unable to connect, the issue may be with your internet service.

6. Restart Your Devices

• Turn off and restart the following devices:

• Router
• Modem (if applicable)
• Smart TV

• Wait a few minutes for the internet connection to stabilize.
• Launch the Astro app again and test the playback.

If you are still having issues, proceed to submit report via WhatsApp or Feedback Form and provide:

• Astro ID use
• Smart TV model
• OS version
• Error reported on device

This will help our support team investigate and assist you further.

Sun NXT offers content in six different languages: Tamil, Telugu, Malayalam, Kannada, Bengali, and Marathi.

Yes, we will schedule for the equipment collection after you have terminate the services.
If equipment is damaged or lost, penalty fee will be charged as below:

• Astro Box – RM100
• Router – RM200 (For Astro Fibre only)
• Mesh – RM200 each (For Astro Fibre only)

ZEE5 offers a wide range of exclusive content that is available only for ZEE5 premium members, which includes ZEE5 Originals, world-renowned Hollywood flicks, blockbuster Hindi cinemas, superhit regional movies across 18 different languages, American TV shows, documentaries, dubbed movies in regional languages and so much more. With a premium membership, you can enjoy all these exciting content with a seamless ad-free experience.

If you’re facing issues updating your mobile number via My Astro, here’s how you can update your mobile number through your Set Top Box (STB).

• Follow Method A if your box uses a satellite dish (Applicable to all boxes).
• Follow Method B if you are on Ultra or Ulti box that is connected to the internet.
• If your box has both, either method will work.

Method A:

1. Switch on your box and navigate to Channel 105 OR Channel 201 OR Channel 308 OR Channel 802.
2. Press on the red button on your Astro remote control and a QR code will be displayed on your screen.
   
3. Scan the QR code on a mobile device.
4. On the newly opened webpage, please enter your new mobile number.
   
5. To verify your identity, please enter the last 6 digits of the Astro account holder’s MyKad/Passport.
   
6. Please enter the OTP sent to the new mobile number.
   
7. Once the OTP is verified, your mobile number will be updated.
   

Method B:

1. Switch on your box and launch My Astro through the top menu or from the ‘Apps’ section.
2. Once you are in My Astro, press the yellow button on your Astro remote control to visit your ‘Account details’.
   
3. Press the down button to view ‘Personal info’.
   
4. Press the left button and focus on the edit icon for mobile number, press on "OK" to change your contact details.
   
5. To verify your identity, please enter the last 6 digits of the Astro account holder’s MyKad/Passport.
   
6. Please enter your new mobile number.
   
7. Please enter the OTP sent to the new mobile number.
   
8. Once the OTP is verified, your mobile number will be updated.
   

If you’re still unable to update your mobile number, kindly reach out to us via our Feedback Form and a representative from our team will get in touch to assist you soon.

Your account number will be used to identify/verify you for all After Sales-Services. You may also use your mobile number/ Astro smart card number/ NRIC number or Astro Box number.

Please update your auto-debit payment details via My Astro Portal.