Refund can be made when there be a termination of account, over payments and in cases where payment was wrongly made to another Astro account.

Bahasa Malaysia (BM) and Traditional Chinese subtitles will be available where rights permit. However, subtitle availability may vary depending on the title.

Please use your Astro ID to log in to the Astro Fibre App. If you do not have an Astro ID, kindly follow the simple steps here to create one.

Watch this video or follow below steps to Improve Slow WiFi Connection for Astro Fibre

Slow browsing using LAN cable

Looks like there is something wrong with your service connection.

Please run the Speed Test and attach the picture or screenshot of the speed test in the Feedback Form below, in order for us to provide further assistances.

Click here for Speed Test guideline.

Quick Info

A Speedtest is a service that provides free analysis of Internet access parameters, such as connection data rate.

Slow browsing using Wi-Fi

1. Router Positioning

Most people underestimate the importance of picking a good spot for a Wi-Fi router. Even a small shift in positioning could end up being the difference between day and night.

i) High vs. Low

Put the router as high up as possible to extend the broadcasting range of the radio waves. This also helps clear the router of possible interferences.

ii) Concrete & Metals

Make sure your router isn't blocked by any other objects, especially devices that are electronic. Also, avoid placing your router in your basement as this area is usually enclosed by a lot of concrete, which can be almost impossible for Wi-Fi signals to penetrate.

iii) Distance to Router

The further away from your router you get, the weaker the Wi-Fi signal. Therefore, the best option is to place your router as close to your devices as possible, but this is only practical if you have one main area where you tend to use your devices.

Otherwise, you should place your router near the center of your home. After all, Wi-Fi broadcasts in 360 degrees, so it doesn't make sense to put it at one end of the house.

2. Wireless Interference & Noise

You've probably never noticed but there are wireless signals all around you wherever you go and they're passing through you all the time. From where? Electronic devices, Wi-Fi routers, satellites, cell towers, and more.

Although Wi-Fi is supposed to be on a different frequency than most of these devices, the amount of radio noise can still cause interference. Some common causes of interference include:

i) Microwaves

ii) Bluetooth Devices

iii) Cordless Phone

3. Surrounding Wi-Fi signals

A truth of the modern world is that every household has their own Wi-Fi network, which can cause issues with channel overlap. This can be somewhat problematic in a townhouse, but is especially problematic in housing complexes and apartments where there can be many routers within close proximity.

Which is why it's important that you pick a good channel in your router settings. Modern routers can choose channels for you automatically, but sometimes it's better to investigate and find the best channel yourself.

4. Usage

More likely, however, is that the people on your network such as friends, roommates, or family members are participating in bandwidth-heavy activities like gaming and streaming Ultrabox/ Netflix.

Fortunately, if this is the case, you can prioritize your own network traffic by enabling Quality of Service in your router settings.

If the problem persists, please run a Ping Test, Traceroute Test and attach the picture or screenshot of both test results in the Feedback Form below, in order for us to provide further assistances.

Please make sure to attach the required screenshot(s) in ONE file (i.e. Microsoft Word document, PDF, Image file) before submitting the form.


Quick Info
A Speedtest is a service that provides free analysis of Internet access parameters, such as connection data rate.
A Ping Test shows how long it takes for packets to reach host.
A Traceroute Test traces the route of packets to destination host from our server.

No, there are no installation or activation fees for Astro X3, as these plans do not require a set-top box or installation. Once your sign-up is complete, you can start streaming Astro content immediately via the Astro app on your Smart TV or through Astro GO on supported devices.

If an error message on your TV has one of the following keywords:
- Channels are temporarily unavailable due to bad weather.
- Service Currently Not Available
- SCNA
- (Code: SCNA)

You can proceed with below troubleshooting if the weather is good. Otherwise, you may try again later.

STEP 1: Check Weather Conditions

If the weather is bad, wait until it clears before proceeding.

STEP 2: Access STB Diagnostics

2a. Press the Home button on your Astro remote.

2b. Navigate to Settings and press OK.

2c. Navigate to STB Diagnostics and press OK.

STEP 3: Check Signal Strength

Refer to the signal strength % shown on the top left of your screen.

If it is 65% or higher, please take the screenshot and submit your Feedback Form.

If it is below 65%, please go to Step 5.

STEP 4: Power Off the Box

Switch off the power for your box and make sure that the adapter’s power light is off.

STEP 5: Reconnect Satellite Cable

Unscrew the satellite cable from the box and pull it out.

Plug the satellite cable back into the box and screw it back securely.

STEP 6: Power On the Box

Switch on the power for your box and make sure that the adapter’s power light is on.

Please wait for 5 minutes.

STEP 7: Contact Astro Support

If issue persist, please submit the issue on our Feedback Form and attach a picture of your General tab of the STB Diagnostics for assistance or chat with us via WhatsApp at 03-9543 3838.

Centralised Dish

If your Astro Box is connected to your apartment or condo building's centralised dish and the issue persists, please contact your respective Building Management before reaching out to our agents.

STEP 1

Press "HOME" button on your remote control.

STEP 2

Navigate to Settings and press "OK".

STEP 3

Navigate to STB Diagnostics and press "OK".

STEP 4

From General Tab, take a look at the Current Entry Point Name for the LNB type of your input source.

Your Astro GO email will be delivered to you within an hour upon checkout. Please click the link provided to set up your password and download the Astro GO app on your device by clicking here (Google Play Store) or here (iOS App Store). If you want to stream it directly via your computer or laptop, Astro GO is also available at astrogo.astro.com.my. Log in with your Astro ID and start streaming!

Yes, you may change the interface language of the app. To access the language settings, please click "Profile" > "Settings" > "Language" and select your preferred language

Only Astro customers with the Sports subscription as part of their Astro TV Pack (Bundle or add-on) will be able to enjoy the beIN SPORTS CONNECT app on their Ultra/Ulti Box.

Starting 20 January 2026, all Astro customers will have the option to add on the TVBAnywhere+ app to their existing subscriptions.

Customers are only required to return their Ultra Box or Ulti Box with the SIM Card. There is no requirement to return the remote control, power cables, or the satellite dish/outdoor unit (ODU). For these items, please recycle them at registered collection centres which can be found here.

You will be contacted by an Astro representative within two working days to advise you on the next course of action.

To be eligible, you'll need to be an Active Astro Pay TV customer with a valid Astro ID.

An Active Astro customer refers to a subscriber of the Astro Service, whose account is current and active with no outstanding payments due and who has not breached the Astro subscription agreement nor given any instructions to terminate and/or suspend his/her subscription to the Astro Service.

Each account you hold is entitled to one (1) tier status based on the longest active smartcard.

You can add a new Netflix account to your bill through CH 741 or clicking the Netflix button on the remote control. Please enter the email address you would like to use for Netflix subscription and ensure the Billing partner is Astro.

If you would like to transfer your existing Netflix Account to be charged under Astro bill, please follow the steps below:

1. Cancel your existing subscription with Netflix

1. Once the remaining duration of your existing subscription has ended, you may proceed to subscribe for Netflix via Astro bill

1. To subscribe, go to CH 741 and enter the email address used for your previous subscription with Netflix

1. Once successfully completed, all existing settings and watching history on your Netflix account will be brought over

For customers with Entertainment Plus, Movies Plus, Sports Plus, Premium 2, Premium 3, and Platinum Pack

1. Launch Netflix from the home screen or via remote control.

1. Click on Get Started

1. If you are an existing Netflix customer, please fill in the email address and password associated with your Netflix account. Once successfully completed, all existing settings and watching history on your Netflix account will be brought over. If you are a new Netflix customer, create a new account by filling in your email address and a password for your new Netflix account.

1. In the next screen, you will be shown your default Netflix package “Standard”, you can choose to upgrade to “Premium” here.

1. The final screen provides a summary of your account including your email. Click Start Watching to enjoy Netflix on your Ultra/Ulti Box.

For Non-Entertainment Plus, Premium 2, Premium 3, and Platinum Pack Pack customers (New Netflix customers)

1. Launch Netflix from the home screen or via remote control.

1. Click on Join Now

1. Create a new account by filling in your email address and a password for your new Netflix account.

1. The final screen provides a summary of your account including your email. Click Start Watching to enjoy Netflix on your Ultra/Ulti Box.

Note: The Netflix plan will be defaulted to Premium, you may select ‘Change Plan’ to choose the ‘Standard’ plan.

For Non-Entertainment Plus Pack, Premium 2, Premium 3, and Platinum Pack customers (Existing Netflix customers)

1. Launch Netflix from the home screen or via remote control

1. Click on Sign-in

1. If you are an existing Netflix customer, please fill in the email address and password associated with your Netflix account.

1. You will be able to start watching Netflix on your Ultra/Ulti Box once you log in.

Not to worry, you will only need to verify your Astro ID once. After that, you may log in to your account as usual.

Yes, however, we do advise keeping your subscription while your Smart TV is being fixed to avoid having to download the app again.

Yes, there will be a selection of titles available with Video On Demand (VOD) rights. Please note that VOD availability for movies is subject to content rights.

For new Astro Fibre customers with the RG21 router, you will be guided to install the Astro Fibre App on your mobile device during the installation of the service. Alternatively, you may refer to the user guide here for self-installation.

If you see the error message "There is No Internet Connection" while using the Astro app on your Smart TV, please follow these troubleshooting steps:

1. Check Your Internet Connection

• Confirm whether your Smart TV is connected to the internet via Wi-Fi or a LAN (Ethernet) cable.

2. Check the LAN Cable Connection (if using Ethernet)

• Ensure the LAN cable is securely connected from the router's LAN port to the TV's LAN port.
• Verify that the LED indicator lights on both the router and TV network port are active.

3. Test the LAN Cable

• Connect the same LAN cable to another device (for example, a laptop or another Smart TV).
• Check whether the device can access the internet to confirm the cable is functioning properly.

4. Reconnect to Wi-Fi (if using Wi-Fi)

• Go to your TV's network settings.
• Select your home Wi-Fi network and choose Forget Network.
• Reconnect to the Wi-Fi network by entering the password again.

5. Check Other Devices

• Verify that other devices in your home (such as smartphones, tablets, or laptops) can connect to the same Wi-Fi network.
• If all devices are unable to connect, the issue may be with your internet service.

6. Restart Your Devices

• Turn off and restart the following devices:

• Router
• Modem (if applicable)
• Smart TV

• Wait a few minutes for the internet connection to stabilize.
• Launch the Astro app again and test the playback.

If you are still having issues, proceed to submit report via WhatsApp or Feedback Form and provide:

• Astro ID use
• Smart TV model
• OS version
• Error reported on device

This will help our support team investigate and assist you further.

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Settings.

STEP 3

Navigate to Standby Mode and press "OK".

STEP 4

Navigate to your preferred selection and press "OK".

STEP 5

Navigate to Save and press "OK" to confirm your selection.

Only new and existing Astro Fibre customers with the RG21 or RG31 (launching soon) router can use the Astro Fibre App.

Step 1: Separate Your Wi-Fi Network Name

First, you need to set up your Wi-Fi to Dual-band in order to be less susceptible to interference, and allows you to choose between the 2.4GHz or 5GHz bands when connecting a device. A Wi-Fi frequency of 5GHz is best when you are near your router, and 2.4GHz is best for when you are far from your router.

• Check the bottom of your router for a website or IP address, username, and password.

Below are details for a standard login based on a standard router issued by ISP (Telekom Malaysia, Maxis, and Time dot Com)

• Login to your account
• Identify your Wi-fi Settings (This could be in advanced settings)
• Identify both the 2.4GHz and 5GHz options.
• Split the signals by renaming the 2.4GHz and 5GHz signals respectively, and make sure both are enabled.
• For detailed instructions based on router model, on how to separate your Wi-Fi, click here and choose the option according to your ISP and router brand.

Step 2: Factory reset your Ultra Box by following the steps below.

a. Press the Home button on your remote

b. Go to your settings page

c. Scroll down and select Reset/Restore

d. Select restore factory settings and proceed

e. Enter your PIN to access restore factory settings (default pin: 0000)

f. Choose restore and wait until the box reboots automatically. This may take around 2 minutes and you will see the Astro logo again when it's done.

STEP 1

Press "HOME" button on your remote control.

STEP 2

Navigate to Settings and press "OK".

STEP 3

Navigate to STB Diagnostics and press "OK".

STEP 4

Navigate to IP Diagnostics and press "OK".

STEP 5

IP Diagnostics information will be displayed.

Existing Netflix add-on customers will be notified prior to their next bill cycle via email.

1. Launch the Simply South icon on your Ultra and Ulti box
2. Click on “Log in” button via top menu in Simply South app
3. Follow the instructions displayed on your TV screen

STEP 1
Switch off the power for your box and make sure that the adapter's power light is off.

STEP 2
Locate the Smartcard at the front or right side and gently pull it out make sure that the adapter's power light is off.

STEP 3
Wipe the Smartcard's gold chip clean using a dry soft cloth.

STEP 4
Make sure the gold chip is facing upwards and reinsert it all the way in.

STEP 5
Switch on the power for your box and make sure that the adapter's power light is on. Please wait for 5 minutes.

STEP 6
Turn on your box. You should no longer be experiencing this problem.
If issue persist, please submit the issue in our Feedback Form and attach a picture of your General tab of the STB Diagnostics for assistance.

No, you will not be able to manage your account with the Astro Fibre App. However, you may download the “MyAstro” app on your mobile device now to manage your Astro account in a fast and easy way.

If you are currently on the Entertainment, Entertainment Plus, Premium 2, Premium 3 or
Platinum Pack, you may switch your current Asian Favourites selection to Viu Premium via the
My Astro app or myastro.astro.com.my. Simply go to the "Account” tab and scroll down to the
“Subscription” section. Select “TV Pack” > “Add-ons” and then click the “Switch” button.
Alternatively, you may also reach out to us via WhatsApp by typing “Hi” at 03-9543 3838 to
make your switch to Viu Premium.

If you're interested in subscribing to the HBO Max app via Astro, you can use the My Astro app through the following methods:

• App: Download the My Astro app from the Apple App Store, Google Play Store, or Huawei AppGallery.
• Web: Visit www.astro.com.my/max
• STB: You can subscribe HBO Max by either launching the HBO Max app OR the My Astro app on your Ultra/Ulti Box.
• WhatsApp: You can reach out to us via WhatsApp by typing "Hi" to 03-9543 3838. Then from main menu select Add-on Purchase -> Enter code HBOMAXULT.

If you are interested to upgrade your box, you can do so via Astro's retailers or online as follows:

I. Visit https://hub.astro.com.my/#5

II. Select `Box Upgrade` and log in with your Astro ID

III. Select the box you would like to upgrade

The entire eKYC verification process may be completed within 5 minutes.

Kindly download the Astro Smart TV app from your Smart TV’s app store and follow the steps on the screen to log in.

Astro GO is a companion app that is complimentary for all Astro subscribers and allows up to 2 users to stream at the same time. 200 hours of cloud recording* come complimentary with your Pay TV subscription.

Astro GO+ is an add-on service that enables up to 4 users to stream Astro GO and/or Multiroom Smart TV** at the same time. The amount of cloud recording storage will also be increased to 1500 hours.

*Cloud recording hours are shared across your Astro Box, Astro GO and Multiroom Smart TV

** Provided that you have a Multiroom Smart TV subscription

There will be no installation fee for both Astro Box and Ultra Box. The Multiroom (second decoder) must be installed at the same registered address as your primary subscription.

The different light colours on your Astro Ultra Box or Ulti Box informs you on the phase the box is going through.

1. Ultra Box magenta light / Ulti Box purple light - Your box is turned "On".

Press the Home button to launch Video On Demand and stream anytime or press channel number on your remote.

2. Ultra Box / Ulti Box orange light - Your box is on "Standby" mode.

Your box is ready to be turned "On" or leave it in this mode to receive new software updates.

3. Ultra Box / Ulti Box blinking orange light - Your box is booting up.

Please wait a few minutes for the box to start.

4. Ultra Box / Ulti box blinking blue light - Your box is downloading a software update.

Please wait a few minutes for the download to complete.

If your Astro account is suspended or disconnected, your Sun NXT app access will be immediately affected, and you will no longer be able to use the service. To restore your Sun NXT app access, please ensure your Astro account is active.

Settlement of total outstanding balance is to be made prior to any of the request.

Huawei HG8240

Huawei HG850A

FIBER HOME

ALCATEL LUCENT

HUAWEI

ZTE

Option 1

1. Please turn off all devices (Modem and Router). By restarting your modem, you can isolate the possibility of overloaded processes in the modem, which would impact its performance.
2. Ensure the fiber cable from your wall socket and modem is securely connected.

Modem connection with Fiber Cable

Modem connection with Copper Cable

Notes: You might be connected to LAN 1 if backbone is Maxis

Router connection

Technicolor Router

3. Please make sure the LAN cable is connected properly from router (Port 1-4 - Yellow port) to PC/Laptop.

4. If the issue persists, submit your feedback form and attach your modem light indicator picture/video for further assistance.

Option 2/ Option 3/ Option 5/ Option 6

1. Please turn off all devices (Modem and Router). By restarting your modem, you can isolate the possibility of overloaded processes in the modem, which would impact its performance.

2. Ensure the fiber cable from your wall socket and modem is securely connected.

3. Ensure both cables on the Modem (LAN Port 2) and Router (WAN Port - Red port) are properly connected.

Modem connection with Fiber Cable

Modem connection with Copper Cable

Notes: You might be connected to LAN 1 if backbone is Maxis

Router connection

Technicolor Router

3. Please make sure the LAN cable is connected properly from router (Port 1-4 - Yellow port) to PC/Laptop.

4. Please make sure both cables on Router (Any Yellow port) and Astro Decoder (Network Port behind decoder) are properly inserted.

DMT4 (Hybrid mode)

DMT5 (Hybrid mode)

DMT4 (IP mode)

DMT5 (IP mode)

5. Switch on modem and router and please wait for 2 minutes to stabilise the devices after reboot.

6. If the issue persists, submit your feedback form and attach your modem light indicator picture/ video for further assistance.

Option 4

1. Ensure Modem/Router are connected tightly to the power socket.

2. Try to use another power socket / power source to eliminate faulty power sockets/power sources which could cause the issue.

3. If the issue persists, submit your feedback form for further assistance.

Video On Demand (VOD) is a new way of enjoying your Astro, for free* as part of your subscription. Here's what you can do by watching your show via VOD:

1. Pick and choose your show anytime of the day without needing to wait for your show to air.

2. Catch-up on episodes you've missed or binge-watch all episodes instantly.

3. Pause, rewind, or fast-forward to your favourite parts of the show.

4. Watch full uncut episodes.

5. No weather or other disruptions during your viewing time.

6. Browse our library of recommended shows for you based on your viewing history. Everything you see is free as part of your subscription.

7. To rent additional blockbuster movies on a pay-per-view basis, visit the "Store' section in our VOD library.

The payment will take some time to reflect in My Astro app and web account. If you experience any further issues or it is still not reflecting in My Astro, please reach out to us via WhatsApp at 03-9543 3838 for more details.

Wider WiFi coverage:

- All areas across the house will enjoy optimal coverage with multiple Mesh WiFi units located in areas with sub-optimal coverage to form a larger WiFi network.

Stable connection;

- Consistent coverage of optimal WiFi signal will ensure a stable connection as the Mesh unit will automatically connect your devices to the strongest WiFi signal around your house.

e‑Invoice comes with several key benefits that can enhance your overall billing experience, including:

Greater convenience
Receive your invoice in a secure digital format and access it anytime. No printed bills are sent to your address.

Improved security
Each e‑Invoice comes with a validation link through IRBM’s system, helping ensure authenticity and reducing the risk of lost or tampered documents.

Better support for tax compliance
Digital invoices make it easier to submit the right documentation for tax purposes and ensure your records align with regulatory requirements.

More efficient record keeping
All invoices are stored digitally, making retrieval, tracking and financial reporting simpler.

Environmentally friendlier
Going digital helps reduce paper usage and contributes to sustainable, eco‑friendly practices.

Absolutely not. Astro wants to give our members the convenience of having all their favourite series, exciting originals, vernacular signatures, live sports and local blockbuster movies all in one place.

No additional subscription is required. Video On Demand (VOD) is a value-added service for all Astro customers with connected Ultra Box and Ulti Box. All you have to do is connect your box to your home Wi-Fi and you'll be able to access the world of on demand. Binge-watch, rewind, fast-froward and stream all your favourite shows anytime.

Astro customers can subscribe to WeTV VIP via Astro as an add-to-bill service for only RM13.90/month (RRP RM13.90) to enjoy the app on their big screen TV via the Ultra/Ulti Box, wetv.vip or on the go with the WeTV mobile app which is available on Android and iOS devices.

For more details on the WeTV VIP Membership, please refer to Q12 - Q17.

Ultra Box with Contract:

Astro customers are entitled to a two (2) years manufacturer warranty and Installation warranty. During this period, after-sales service is free of charge. However, when your warranty period is over, all after-sales service is subject to a minimal service charge starting from RM65 inclusive of 8% Service Tax.

Other Decoders/Ultra Box Without contract:

Astro customers are entitled to a one (1) year manufacturer warranty and (6) months Installation warranty. During this period, after-sales service is free of charge. However, when your Installation warranty period is over, all after-sales service is subject to a minimal service charge starting fromRM65 inclusive of 8% service tax.

STEP 1

Press "HOME" button on your remote control.

STEP 2

Navigate to Settings and press "OK".

STEP 3

Navigate to Digital Audio and press "OK".

STEP 4

Choose your preferred selection and press “OK”.

STEP 5

Select Yes, continue and press "OK" to confirm on the changes.

Otherwise, select No, go back to cancel.

If Netflix is included as part of your Astro pack, you will find it in My Astro app

where you will be able to manage all the streaming apps you are entitled to.

Netflix will also be included in your Astro bill under “Monthly Charges”

If you have added Netflix to your bill (Netflix Add-on), the Netflix subscription charge will appear in your Astro bill under “One-time charges” as Netflix App Subscription or Netflix Premium and will be charged monthly. You should refer to Netflix account Management for any changes to your Netflix subscription or should you wish to change to other billing methods.