Mesh WiFi technology greatly improves the WiFi network coverage within your home and virtually eliminates all WiFi “dead spots”. However, like all technologies there are limitations that you should be aware of.

The pairing of Mesh unit to the WiFi router is automatically handled between the WiFi router and the Mesh unit after it calculates its current position in relation to the WiFi router and surrounding Mesh unit (if available) already connected to the WiFi router.

If you are self-installing the mesh at your house, it is advisable for you to always pair the Mesh unit(s) with the WiFi router only regardless of how many Mesh unit available at your house.

Please note that if you have a Mesh connected to another Mesh, the expected performance of the WiFi speed will not perform as optimally as when compared to a Mesh connected directly to the WiFi router. Adding more points (also referred as Number of hops) in between your device to the WiFi router which will cause a reduction in bandwidth and add latency.

Astro customers with the Ultra or Ulti Box can access Prime Video via their Ultra/Ulti Box or stream directly using the Prime Video app. If you have not yet upgraded to Astro’s Ultra/Ulti Box, please reach out to us on WhatsApp by sending “Hi” to 03-9543 3838.

You can use your existing Prime Video account to access Prime Video on the Ultra/Ulti Box however, if you would like to enjoy the Prime Video for 2 months without additional cost, you may register with a new mobile number/email address. Alternatively, you can activate the 2-month access period using the same mobile number or email address associated with your Prime Video account after your current subscription ends, anytime between 24 April 2025 and 23 June 2025.

Please be sure to take your decoder, satellite dish, smartcard, remote control and all other fixtures after dismantling is done by the technician.

Service Tax is charged based on the date the service is rendered. For services rendered on or after 1st March 2024, the Service Tax rate would be at 8% whilst for services enjoyed before 1st March 2024, the Service Tax rate would be 6%.

Follow the steps below to activate and access Prime Video.

a. Via Astro’s Ultra/Ulti Box
Step 1: Launch Prime Video from the application rail (on the Home page)

Step 2: Scan the QR Code displayed on your TV screen using your mobile device to be redirected to the Prime Video app

Step 3: Once you are redirected to the Prime Video app on your mobile, create an Amazon Prime account using your mobile number or email address. Then click on ‘Verify mobile number’

Step 4: Now that you have activated your Prime Video account, your TV screen would be refreshed as below

Step 5: Click on Proceed and then on the “Sign in” button

Step 6: Pair your Ultra/Ulti Box to your Prime Video account by scanning the QR Code using your mobile device

Step 7: Enter the registration code displayed on your TV screen on either a mobile browser or open the Prime Video app on your mobile device, and then click "Allow".

b. Via Astro’s Website https://product.astro.com.my/apps/primevideo

Step 1: Visit https://product.astro.com.my/apps/primevideo and click on "Activate Prime Video Now" then log in using your Astro ID and follow the steps on screen.

Step 2: Scan the QR Code displayed on your TV screen using your mobile device to be redirected to the Prime Video app

Step 3: Once you are redirected to the Prime Video app on your mobile, create an Amazon Prime account using your mobile number or email address. Then click on ‘Verify mobile number’

Step 4: Now that you have activated your Prime Video account, your TV screen would be refreshed as below

Step 5: Click on Proceed and then on the “Sign in” button

Step 6: Pair your Ultra/Ulti Box to your Prime Video account by scanning the QR Code using your mobile device

Step 7: Enter the registration code displayed on your TV screen on either a mobile browser or open the Prime Video app on your mobile device, and then click "Allow".

c. Via My Astro app

Step 1: Download the My Astro app from the Apple App Store, Google Play Store, or Huawei AppGallery.

Step 2: Go to Account > Subscription > Add-ons > Manage your add-ons > select ‘Prime Video’ > Proceed then click on ‘Confirm order’

Step 3: Once done, go back to Account > Subscription > Add-ons. Here, you will be able to see ‘Prime Video’ under the list of ‘Apps’. Click on it and follow the steps displayed on screen to activate your Prime Video account

Step 4: Once you are redirected to the Prime Video app on your mobile, create an Amazon Prime account using your mobile number or email address. Then click on ‘Verify mobile number’

Step 5: Scan the QR Code displayed on your TV screen using your mobile device to be redirected to the Prime Video app

Step 6: Click on Proceed and then on the “Sign in” button

Step 7: Pair your Ultra/Ulti Box to your Prime Video account by scanning the QR Code using your mobile device

Step 8: Enter the registration code displayed on your TV screen on either a mobile browser or open the Prime Video app on your mobile device, and then click "Allow".

Step 9: Prime Video is now part of your subscription. Enjoy!

Yes, the 6% Service Tax will be imposed for Astro Smartcard/SIM card replacement effective bill date 9

th

July 2024 onwards.

Watch this video or follow below steps to fix your WiFi connectivity issue

Skyworth RG21

1. Please connect your computer or laptop to your Astro Fibre router using WiFi or LAN cable. Your LAN cable must be connected from the yellow port of Astro Fibre router (Any available port).
2. Once connected, open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox and etc.
3. On the address bar, type http://192.168.100.254 and below page will appear.

Login using your username and password if you have changed the router login setting. Otherwise, your default router login is as per below.

Username: user
Password: user

4. Once you have successfully logged in, the router's web-based setup page will appear.

5. At the top of the page, click WLAN to configure the WiFi parameters.

6. To change the channel on 2.4G, click the drop-down arrow for Channel, then select your desired channel.

7. Then, click "Save & Apply" for the changes to take place.

8. You may make the same changes for 5G by click the drop-down arrow for Channel, then select your desired channel.

9. Then, click "Save & Apply" for the changes to take place.

You can record your favourite shows, save them to the cloud storage and watch it across any of your devices (Astro Box, Astro GO devices, Multiroom Smart TV).

If your technical issue remains unresolved after completing the recommended troubleshooting steps or seeking assistance from customer support, a technician can be arranged to visit. The applicable charges are as follows:

i. In-contract customers: Free of charge (FOC)
ii. Out-of-contract customers: RM65 per visit.

Yes, you can upgrade your internet speed. However, speed downgrade is not allowed.

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Settings.

STEP 3

Navigate to Network Settings and press "OK".

STEP 4

Select Network Diagnostics and press "OK".

STEP 5

Details information of Network Diagnostics screen will be displayed.

For other boxes, customers are advised to recycle them at registered collection centres for proper handling and management of e-waste in an environmentally sound manner. Click here to find a registered collection centre nearby.

For all recycling-related questions, please click here.

You can get your TIN from the

MyTax Portal

or visit the nearest IRBM branch.

Astro's Plug & Play Box is our latest box where users can enjoy the latest Astro box simply by connecting it to the TV and internet. There is no longer a need to schedule or pay for an installation. By connecting your Plug & Play Box to home broadband, you will be able to-do the following:

• Watch your channels over the Internet. No more rain fade!
• Never miss your favorite shows again as you can stream LIVE events from the beginning, or simply pause and resume the program as you wish.
• Access a library of over 110,000 videos on demand. Catch-up or binge-watch full episodes whenever you like.
• Access your recordings anytime on TV or the Astro GO app via Cloud Recording.

Other features include pause on TV and continue watching on the Astro GO app, enhanced search capabilities and more.

STEP 1
In the Kids Profile, press the Home button on your remote and the home menu will be displayed.

STEP 2
Navigate to Profile.

STEP 3
The Profile Selection Screen will be displayed.

STEP 4
Choose an Adult Profile.

STEP 5
Switching from a Kids to an Adult Profile will require you to enter a 4-digit PIN.
Please enter your PIN to proceed. If you have not set up your PIN, the default code is 0000.

STEP 6
After entering the PIN, you will be able to enter the Adult Profile.

1. Open/Download the My Astro app or visit My Astro web.

2. Login with your Astro ID.

3. Go to Pay Bill.

4. Tap on 'Pay now'.

5. Select the amount to be paid and tap on 'Proceed'.

6. Select 'Credit / Debit Card' as the payment method.

7. Fill in the card information.

8. Fill in your contact details, then tap 'PROCEED TO PAY'.

9. Your payment status will be displayed. Tap 'COMPLETE' to close the session.

10. A successful notification will be displayed.

You may join iQIYI as a VIP by following these simple steps:
Step 1: Head over to www.astro.com.my/iqiyi
Step 2: Select your desired package (Standard VIP or Premium VIP)
Step 3: Click "Get it now"
Step 4: Log in using your Astro ID
Step 5: Click "Get it now" again
Step 6: Please read the prompted message, then click "Proceed"
Step 7: You will see a confirmation message upon successful purchase

Upon logging in or creating a new account, you will be prompted to link your Astro Account to your Astro ID.If you do not have an Astro ID, please follow the steps in to create one and linking if to your Astro Account:

• Step 1: Click “Create Now” on the Astro ID login page
• Step 2: Enter your name, email or mobile number, and your preferred password
• Step 3: Key in the account holder’s MyKad number followed by the Astro account or smartcard number. Refer to your Astro Bill for the account number (10 digits).
• Step 4: Enter the 6-digit verification code sent to your mobile or click on the email verification link to verify
• Step 5: You’re all set!

STEP 1

Press "HOME" button on your remote control.

STEP 2

Navigate to Settings and press "OK".

STEP 3

Navigate to Digital Audio and press "OK".

STEP 4

Choose your preferred selection and press “OK”.

STEP 5

Select Yes, continue and press "OK" to confirm on the changes.

Otherwise, select No, go back to cancel.

No, the Netflix 24-month ala-carte plans do not include an auto-renewal contract. After your contract has expired, you can continue to enjoy the discounted price as long as you maintain your Netflix subscription with Astro.

Watch this video or follow below steps to Improve Slow WiFi Connection for Astro Fibre

Slow browsing using LAN cable

Looks like there is something wrong with your service connection.

Please run the Speed Test and attach the picture or screenshot of the speed test in the Feedback Form below, in order for us to provide further assistances.

Click here for Speed Test guideline.

Quick Info

A Speedtest is a service that provides free analysis of Internet access parameters, such as connection data rate.

Slow browsing using Wi-Fi

1. Router Positioning

Most people underestimate the importance of picking a good spot for a Wi-Fi router. Even a small shift in positioning could end up being the difference between day and night.

i) High vs. Low

Put the router as high up as possible to extend the broadcasting range of the radio waves. This also helps clear the router of possible interferences.

ii) Concrete & Metals

Make sure your router isn't blocked by any other objects, especially devices that are electronic. Also, avoid placing your router in your basement as this area is usually enclosed by a lot of concrete, which can be almost impossible for Wi-Fi signals to penetrate.

iii) Distance to Router

The further away from your router you get, the weaker the Wi-Fi signal. Therefore, the best option is to place your router as close to your devices as possible, but this is only practical if you have one main area where you tend to use your devices.

Otherwise, you should place your router near the center of your home. After all, Wi-Fi broadcasts in 360 degrees, so it doesn't make sense to put it at one end of the house.

2. Wireless Interference & Noise

You've probably never noticed but there are wireless signals all around you wherever you go and they're passing through you all the time. From where? Electronic devices, Wi-Fi routers, satellites, cell towers, and more.

Although Wi-Fi is supposed to be on a different frequency than most of these devices, the amount of radio noise can still cause interference. Some common causes of interference include:

i) Microwaves

ii) Bluetooth Devices

iii) Cordless Phone

3. Surrounding Wi-Fi signals

A truth of the modern world is that every household has their own Wi-Fi network, which can cause issues with channel overlap. This can be somewhat problematic in a townhouse, but is especially problematic in housing complexes and apartments where there can be many routers within close proximity.

Which is why it's important that you pick a good channel in your router settings. Modern routers can choose channels for you automatically, but sometimes it's better to investigate and find the best channel yourself.

4. Usage

More likely, however, is that the people on your network such as friends, roommates, or family members are participating in bandwidth-heavy activities like gaming and streaming Ultrabox/ Netflix.

Fortunately, if this is the case, you can prioritize your own network traffic by enabling Quality of Service in your router settings.

If the problem persists, please run a Ping Test, Traceroute Test and attach the picture or screenshot of both test results in the Feedback Form below, in order for us to provide further assistances.

Please make sure to attach the required screenshot(s) in ONE file (i.e. Microsoft Word document, PDF, Image file) before submitting the form.


Quick Info
A Speedtest is a service that provides free analysis of Internet access parameters, such as connection data rate.
A Ping Test shows how long it takes for packets to reach host.
A Traceroute Test traces the route of packets to destination host from our server.

It will take around 10 to 15 minutes before you are able to view your purchase.

To purchase Astro First easily, you can do it through My Astro. Here's how:

1. Download the My Astro app or visit My Astro web
2. Login using your Astro ID
3. Go to Astro Store > Astro First section
4. Select your preferred movie and click on rent
5. When your rental is confirmed, you will see details on which channel that you can watch your movie

Purchase via WhatsApp

1. Go to channel 480
2. Whatsapp the “movie code” to 03-9543 3838
3. Enter your “smart card number” (this is available on the top right corner of your tv screen)
4. Type “1” to confirm
5. The reply will direct you to the entitlement channel accordingly

Purchase via SMS

1. Go to channel 480
2. SMS the “movie code” to 32999
3. The SMS confirmation reply will direct you to the entitlement channel accordingly

*SMS service is available for Maxis, Celcom, Digi and U Mobile only.

From Beyond PVR On Demand interface:

1. Press the “Home” button on the Astro remote control
2. Select “On Demand” and press the “OK” button from the Astro remote control
3. Scroll to “Store” and search for the Movies/series
4. Select “Buy” and enter Pin Code.

From Ultra/Ulti On Demand interface:

1. Press the “Home” button on the Astro remote control
2. Scroll to the Store tab
3. Scroll to “Astro First: New Releases” or “Astro First: Blockbusters” and search for the Movies
4. Select “Rent” and enter Pin Code

From Astro Go app (purchases only applicable for Android devices):

1. Download the Astro Go app from the Google Play store.
2. Create an ID and link your account / proceed to log in if you have linked your account
3. Scroll to “Store” and search for “Astro First: New Releases” or “Astro First: Blockbusters”
4. Select “Rent” and enter Pin Code

*The default pin code is 0000 if you have not pre-set it.

🎁 Want to buy Astro First movies faster & track your rentals?

📱 Download the My Astro app to:
- Browse Astro First titles
- Rent in 1 tap
- Get reminders when new movies launch

Yes, customers will be charged a fixed Paper Bill Fee of RM10.00 per bill every month for each account.

Download the Sun NXT app > Select "Profile" > Click on "Log in with Astro ID" > Click on "Do not have an Astro ID? Click here".

If an error message on your TV has one of the following keywords:
- Switch to Continuous Viewing
- Service Currently Not Available (SCNA)
- (Code: SCNA)

You can proceed with the troubleshooting steps below if the weather is good. Otherwise, you may try again later.

STEP 1

On your remote, press the Home button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Settings.

STEP 3

Navigate to Satellite Settings and press OK.

STEP 4

Navigate to Diagnostics and press OK.

STEP 5

Refer to the signal strength on your screen.

If it is 65 or higher, please take the screenshot and submit your feedback form.

If it is below 65, please go to Step 6.

STEP 6

Switch off the power for your box and make sure that the adapter’s power light is off.

STEP 7

Unscrew the satellite cable from the box and pull it out.

STEP 8

Plug the satellite cable back into the box and screw it back securely.

STEP 9

Switch on the power for your box and make sure that the adapter’s power light is on. Please wait for 5 minutes.

STEP 10

Turn on your box. You should no longer be experiencing this issue.

If issue persist, please submit the issue on our Feedback Form with error details and attach a picture of your General tab of the STB Diagnostics for assistance.

Centralised Dish

If your Astro Box is connected to your apartment or condo building's centralised dish and the issue persists, please contact your respective Building Management before reaching out to our agents.

STEP 1

Switch off the power for your box and make sure that the adapter's power light is off.

STEP 2

Locate the SIM card at the left side and gently pull it out.

STEP 3

Wipe the SIM card's gold chip clean using a dry soft cloth.

STEP 4

Make sure the gold chip is facing down and reinsert it all the way in.

STEP 5

Switch on the power for your box and make sure that the adapter's power light is on.

Please wait for 5 minutes.

STEP 6

Turn on your box. You should no longer be experiencing this problem.

If issue persist, please submit the issue on our Feedback Form with the error details and provide sim card number for assistance.

Yes. To change the language, go to the app’s side menu, then go to Settings and select the preferred interface language.

For enquiries relating to Disney+ content, application features, settings or functionality, please visit the Disney+ Help Centre.

No, the Astro Fibre App is a free mobile application for all Astro Fibre customers with the RG21 router or RG31 (launching soon) router. However we may introduce paid services in the future via the app.

If you are currently receiving a paper bill, your billing delivery method will automatically switch to e-bill once your e-invoice request is accepted. This also means you'll be saving RM10 on paper bill fees. Please ensure that your email address is accurate.

Click here

if you wish to update your contact details.

You can retrieve your Astro account number by referring to the top right corner of your Astro bill, which has a 10-digit combination (e.g.08XXXXXXXX or 09XXXXXXXX).

Another way to retrieve your account number is via My Astro:

My Astro app on your Internet-connected Ulti/Ultra Box

1. Press "Home"
2. Launch My Astro app on the Ultra/Ulti Box (shortcut icon next to Settings icon on Home screen, or launch the app through app rail)
3. Once the app is loaded, press Yellow button on your Astro remote control to reveal Account Details

My Astro app or web

1. Download the My Astro app or visit My Astro web
2. Login using your Astro ID
3. You will see your account number tied to your subscription located at the top corner of the home page.

Astro GO

1. Go to "Settings"
2. Select "My Device"
3. Your 8-digits "Household ID" can also be treated as your Astro account number.

🔄 Want to manage your Astro subscription easily?

📱 Download the My Astro app to:
- Manage your pack subscriptions
- Get add-ons in just minutes
- Get details about your contract

All Ultra/Ulti Box customers may watch selected WeTV titles for free on their Astro Box.

Simply follow these steps:

Step 1: Go to your Ultra/Ulti Box Home Page and select WeTV under the Apps rail

Step 2: Click play on any non-VIP titles/episodes and start streaming!

Note: No login is required to stream free content on WeTV.

For any unreturned equipment, penalty fee will be charged as below:

• Astro Box – RM100
• Router – RM200 (For Astro Fibre only)
• Mesh – RM200 each (For Astro Fibre only)

Yes. The highest video quality available on the TVBAnywhere+ app is 1080p.

Visit the app store on your Smart TV and search for the Astro Smart TV app to download it.

For self-installation, in your first bill upon activation of your Plug& Play Box, the activation fee will be included as a separate line item in your bill alongside the subscription fee.

If you choose to install the Plug & Play Box via installer, you can pay the installation fee and activation fee directly to the installer upon installation. This will be reflected in your next bill itemised as setup fee.

Astro ID and / or account deletion is permanent. Upon deletion, it will be unlinked from your TV subscription account and you will be logged out from all the associated Astro apps and / or services connected including the partner apps that you have logged in using the same Astro ID.

If you have any queries regarding Astro ID or would like to request for Astro ID account deletion, click on submit your request here, fill in the required details and our Astro representative will get back to you within 3 business days for security verification purposes.

No. The Sun NXT app subscription is currently only accessible within Malaysia.

beIN SPORTS CONNECT is the ultimate live streaming sports service that provides you with access to global sporting events both LIVE and on-demand such as major European football leagues and over 3,000 hours of live tennis via Astro's Ultra Box, Ulti Box, mobile app or web.

1. Open/Download the My Astro app or visit My Astro web.

2. Login with your Astro ID.

3. Go to Add on Apps.

4. Under Apps categoty, tap Show more to show the full list of available Apps.

5. Select the require App to add-on and tap 'Proceed'.

6. Review order, select agreed and tap on 'Confirm order'.

7. Select 'Approve' to edit add-ons.

8. A confirmation order will be displayed and click 'Done' to close.

WeTV is a global video on demand and over-the-top streaming service, providing the best premium entertainment including Chinese, Indonesian, Korean, Thai, Japanese and Malaysian series and movies to fans of Asian entertainment.

1. Open/Download the My Astro app or visit My Astro web.

2. Login with your Astro ID.

3. Go to Account.

4. Under Billing, tap on Auto Debit.

5. Select 'Use a different card'.

6. Fill in all the information, choose 'I agree to the Terms and Conditions & Privacy Notes', then tap 'Save'.

7. A successful notification will be displayed.

Once your 12-month contract period ends, you will continue to enjoy your Astro X3 Pack at the same monthly subscription fee as your per your initial plan, subject to Astro's prevailing terms and conditions and any future changes communicated in advance. There will be no price change upon contract expiry. Pricing is as outlined below.

Note: All prices quoted are excluding SST

For Ultra/Ulti Plug & Play Box installation, it is recommended that you attempt to self-install by following the installation guide here, but there is an option to request for an installer to install the box at your premise. However, there will be a separate fee for this service request.

Yes. You can explore the My Astro app even if you’re not logged in. Click at “Continue as guest” to check out the app features before singing up or logging in.

However, if you're an Astro customer we recommend you sign up/login with your Astro ID for the best experience. Here's how to link your Astro account to your Astro ID.

Download My Astro app or visit the My Astro website.

By changing from a higher contract duration e.g., 24-months commitment period to lower contract duration e.g., 12-months, a proration of the cancellation fee will be applicable whereby you will be charged per contract's month balance against the maximum cancellation fee agreed upon during sign up for the offer.

A proration of the cancellation fee will be applicable whereby you will be charged per contract's month balance against the maximum cancellation fee agreed upon during sign up for the offer.

You will start a new contract with 12-months commitment and receive the corresponding discount for that duration.

Check out how a cancellation fee is calculated with examples via this link:

When Band Steering is disabled, you will see two separate WiFi SSID based on its frequency bands. Example:

i. SSID: SSID2G, Password: 1234567

ii. SSID: SSID5G, Password: 4567890

*WiFi SSID (Service Set Identifier) is the name of your wireless network, also known as Network ID. It is viewable to anyone with a wireless device within reachable distance of your network.