我们提供一站式服务为您申请Astro和Broadband。不必开车，排队和在销售柜台等候。 我们可以帮助您处理您的申请。

我们不收取额外费用。 无需提供信用卡信息。 费用与您在销售柜台申请的费用相同。

首先，您可以在线申请，我们将在工作时间内立即与您联系。 通过WhatsApp/电子邮件/传真发送您的身份证-IC（马来西亚公民）/ 护照（外国人）的复印件给我们。 收到所有资料后，我们将立即处理您的申请。

一旦收到您的完整资料，我们将在工作时间内立即处理您的申请。一旦您的申请获得批准，服务提供商的承包商将与您联系以进行安装预约。

ASTRO 和宽频收费同时在一张账单，享受更大的节省和无忧的账单支付。 在24个月的合约期内，您可以每月以折扣价享受 Astro 和宽频。

Astro 提供多种电视配套，包括娱乐、体育、电影和儿童配套。您可以选择符合您观看需求的配套，并在适用情况下添加额外的串流应用服务。

可以，您可以只订阅 Astro 电视配套而无需绑定宽频。不过，将 Astro 电视与光纤宽频绑定可享有更好的每月优惠，并且只需支付一张综合账单，更加方便。

对于小型家庭以及轻度上网和串流使用者，100Mbps 通常已足够。较大家庭、游戏玩家或重度串流用户则可选择 500Mbps 或 1Gbps 配套，以获得更流畅的多设备使用体验。

大多数 Astro 电视和光纤宽频配套都附带 24 个月合约期。如在合约期满前取消服务，可能会产生提前终止费用。

可以，您可在符合资格及覆盖范围的情况下随时升级电视配套或宽频速度。根据升级情况，可能需要重新计算合约期限。

您的每月账单将由 Astro 直接发出。您可通过电子邮件接收账单，或通过 Astro 账户在线查看。绑定配套用户将收到电视与宽频服务的综合账单。

付款方式包括网上银行、自动扣款、信用卡或 Astro 提供的其他认可付款渠道。我们的团队将在申请过程中为您提供协助。

如果您遇到任何服务中断问题，可联系 Astro 客户服务寻求技术协助。大多数情况下可远程解决，如有需要将安排技术人员上门处理。

可以，迁移服务需视新地址是否在服务覆盖范围内而定。根据您的配套，可能会产生迁移费用及合约调整。

不需要，提交申请时无需提供信用卡资料。服务获批后，付款安排将由 Astro 直接处理。

部分 Astro 电视配套可根据当前促销及服务情况添加串流服务等附加项目。可能需支付额外月费。

是的，光纤安装时通常会提供 WiFi 路由器。路由器型号可能会根据所选宽频速度配套而有所不同。

可以，我们会在处理您的申请前确认您地址的服务覆盖范围，以确保该地区可安装宽频服务。

马来西亚公民需提供 MyKad 复印件。外籍人士则需在提交宽频申请时提供护照复印件。

申请获批后，服务提供商通常会在 2 至 7 个工作日内联系您安排宽频安装预约。

大多数 Astro 宽频配套附带 24 个月合约期，从安装日期开始计算。如您搬迁，可能需要在新地址重新签订 24 个月合约。

可以，您可在新地址具备服务覆盖的情况下迁移宽频服务。合约期限可能会从新安装日期起重新计算 24 个月。

可以，您可申请在家中调整宽频设备位置。若属于非标准安装，可能会产生额外费用，并需在评估后直接支付给安装人员。

可以，您可转用 Astro 宽频。为避免服务中断，建议在终止现有宽频合约前先开通新的宽频服务。

标准安装在促销期间可能免费，但非标准安装（如设备迁移或复杂布线）可能会产生额外费用，并需直接支付给安装人员。

As a rule of thumb, this issue might happen when the devices are not equipped with minimum requirement above that supports the subscribed internet speeds:

• WiFi technology
• Network Interface Card (NIC)

As mentioned above however, it is important to note that despite meeting the device minimum requirements, it is not a guarantee that devices connected over WiFi will be able to achieve maximum subscribed internet speeds due to the following:

1. Bad WiFi signal quality and coverage across the area due to:
   • Distance from the RGW/Mesh AP with connected device
   • Obstruction within the house (walls, metallic surfaces)
   • Interference with other household appliances
2. Congested bandwidth
   • If there are too many devices connected to the WiFi network, then the bandwidth might be overloaded with traffic hence, slowing down the speed
3.  Devices are connected using WiFi instead of wired using LAN.
   • It is important to note that wired connection offers better reliability and speed over WiFi.
   • WiFi is more prone to interference compared to a wired connection which causes lower speeds and dropped signal.
4. Router Positioning: Most people underestimate the importance of picking a good spot for a Wi-Fi router. Even a small shift in positioning could end up being the difference between day and night:
   • High vs. Low: Put the router as high up as possible to extend the broadcasting range of the radio waves. This also helps clear the router of possible interferences.
   • Concrete & Metals: Make sure your router isn’t blocked by any other objects, especially devices that are electronic. Also, avoid placing your router in your basement as this area is usually enclosed by a lot of concrete, which can be almost impossible for Wi-Fi signals to penetrate.
   • Distance to Router: The further away from your router you get, the weaker the Wi-Fi signal. Therefore, the best option is to place your router as close to your devices as possible, but this is only practical if you have one main area where you tend to use your devices. Otherwise, you should place your router near the center of your home. After all, Wi-Fi broadcasts in 360 degrees, so it doesn’t make sense to put it at one end of the house.
5. Usage
   • More likely, however, is that the people on your network such as friends, roommates, or family members are participating in bandwidth-heavy activities like gaming and streaming Ultrabox/Netflix.
   • Fortunately, if this is the case, you can prioritize your own network traffic by enabling Quality of Service in your router settings.
   • If the problem persists, please run a Ping Test/Traceroute Test and attach the picture or screenshot of both test results in the Feedback Form below, in order for us to provide further assistances. Please make sure to attach the required screenshot(s) in ONE file (i.e. Microsoft Word document, PDF, Image file) before submitting the form.

Note:
Astro and its service providers will not offer any guarantees for compatibility of the customer's equipment (e.g., Personal Computer, Notebook, printers) nor provide on site troubleshooting for WiFi service issues related to the customer's equipment.

Disney+ Hotstar is available on Chromecast (Gen 2 onwards, firmware 1.43 & above) and with the latest version of the Disney+ Hotstar app on iPhone, iPad and Android mobile. 

Follow these instructions to cast your film/series: 

• Make sure your mobile device and your Chromecast are on the same WiFi network 
• Log into your Disney+ Hotstar app 
• Select a film/series that you want to cast 
• Press "Play' 
• Once the film/series has started, tap on the casting icon 
• Select the screen you wish to cast to 
• The film/series should then be cast onto your screen

STEP 1
Switch off the power of your box and make sure that the adapter’s power light is off.


STEP 2
Unplug the HDMI cable from your TV and plug it back in securely to other available HDMI port.


STEP 3
Switch on the power for your box and make  sure that the adapter’s power light is on.
Please wait for 5 minutes.


STEP 4
Turn on your box. Do select the correct TV input.
You should no longer be experiencing this problem. 
​

STEP 1

While watching  linear channel, press “OK” to  launch player banner.

STEP 2

Press “OK” again to Pause. You will see an Icon on the left of TV screen.

STEP 3

Press “OK” again to resume the program.

STEP 4

Navigate to Back To Live TV and press "OK" to go back to the live view.

We encourage customers to ensure their TV compatibility with the Astro Multiroom (Smart TV) app first before making any purchase here.

If you are still experiencing any issues, please contact us at wecare@astro.com.my or call or WhatsApp us at 03-9543 3838 and our agents will be happy to assist you.

You may utilise your credit balance to offset future billing on your Astro account, or contact us here for further enquiries.

1. Please standby computer/laptop to access to the internet and connection must be via LAN  (cable) [Connect the LAN (cable) to the yellow port in Maxis Router and  direct to computer/laptop].
2. You may open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox and etc.
3. On the address bar, please go to http://192.168.1.254 and below page will appear.

The default login of the router as below. If you have done a configuration on your router previously,  the password may be different.

Username: user
Password: Router S/N (Available on the sticker at the back of the router)

4. Once you have successfully login, the router's web-based setup page will appear. Please follow below steps for the configuration.

5. From the left menu, choose Wireless 2.4GHz  and then click Basic Settings tab on the left menu to access to below screen.

6. You may change the Wireless Network Name (SSID) and the SSID Password to follow your preferences, then click "Save"  for the changes to take place.

Please reconnect to the new wireless name with the new password once completed.

7. Since this is a dual band router, you will have 2 Wireless Network Names  (SSID) i.e. 2.4GHz and  5GHz. You may connect to any of the SSID, preferably with a stronger signal available.

You may change the Wireless Network Name (SSID) and the SSID Password to follow your preferences for 5GHz by choosing Wireless 5GHz  then click Basic Settings.

Click "Save" for the changes to take  place and reconnect to the new wireless name with the new password once  completed.

- Credit or Debit Cards
- Visa
- Mastercard
- Maybank2U - Pay using your Maybank2U account
- FPX - Pay using any local bank account via FPX
- E-Wallet - Touch "n Go

STEP 1
On your remote, press the Home button and the Home Page will be displayed on your screen.



STEP 2
Navigate to Profile.



STEP 3
The Profile Selection Screen will be displayed. 



STEP 4
Navigate to Edit Profile.



STEP 5
Choose a profile to edit.




STEP 6
Choose a new Profile Picture and press “OK”.


 

Regular (DTH) customers can watch Astro without an Internet connection. If you have selected Plug & Play setup option, a minimum speed of 10Mbps/device is required to enjoy a good HD viewing experience on Ultra/Ulti¯Box and 30Mbps/device for 4K UHD viewing on Ultra Box. However, if you have selected the Regular (DTH) option, the internet speeds above are recommended to enjoy a good viewing experience for On Demand and Astro Cloud services.

This error indicates that you have reached the maximum number of simultaneous video streams across devices for one (1) account. To stop seeing this error, please stop streaming on one of your other devices.

• If you have recently purchased your Astro pack or made any changes to your pack on or after 9th November you can stream on two (2) concurrent screens

• If you have not made any changes you can stream on four (4) concurrent screens.

If you are still having issues, proceed to submit report via WhatsApp or Feedback Form.
 

Disabling band steering means that there will be two frequency bands available for the users - 2.4GHz and 5GHz.
 

Note: Band Steering is called Dual-band Combination in the router web interface.
 

1. Please connect your computer or laptop to your Astro Fibre router using LAN cable. Your LAN cable must be connected from the yellow port of Astro Fibre router (Any available port).
2. Once connected, open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox and etc.
3. On the address bar, type http://192.168.100.254 and below page will appear.

Login using your username and password if you have changed the router login setting. Otherwise, your default router login is as per below.

Username: user
Password: user
 

4. Once you have successfully logged in, the router's web-based setup page will appear.

5. At the top of the page, click Wi-Fi to configure the WiFi parameters.

6. Click on Dual-band Combination button to disable the Band Steering.

7. Set the Wi-Fi name and Wi-Fi Password for both 2.4GHz and 5GHz bands based on your preference. Then click "Apply" for the changes to take place.

8. Kindly ensure to reconnect your WiFi according your new WiFi name and password.

Most Astro customers are eligible to use the app, web, Ultra and Ulti boxes. You will only need to login with your Astro ID. Do note that your Astro ID must be linked to your Astro account to use the service. Click "Create now!' on the login page and you will be guided to create an Astro ID if you do not have one.

Currently Astro GO is only available in Malaysia. You will not be able to access it if you are overseas.

For multi-frequency customers, RM10.00 is charged per physical bill generated.

Astro TV customers

No, you will not be required to take on a new contract after moving. If you still have an existing contract, the contract will continue.

‍

Broadband / IPTV customers

Yes, your contract will be renewed to a new 24-month contract.

Your documents will be handled in compliance with standards set by PDPA (Personal Data Protection Act 2010) and will not be used for other means without your specific consent.

For Astro Ultra Box or Ulti Boxes, you will be able to see an itemised charge called "Box Fee” in your Astro bill.

Yes, you can restrict programmes based on the age rating by going to "Settings” > “Parental Controls & Profiles” on your Astro Box and Astro GO app. Alternatively, you may also create a Kids Profile that provides security with a 4-digit PIN to exit and accessibility to kids-friendly channels and On Demand content only.

Your purchased PPV daily pass will still be accessible to you for the purchased duration ie. 3, 5, 7 or 30 days respectively. However, you will no longer be able to purchase PPV daily passes from 8 Oct onward.

Please close and re-launc hthe Astro Fibre app, and you will be able to log in.

Intermittent internet connection using LAN cable

Looks like there is something wrong with your service connection.

Please run a Ping Test, Traceroute Test and attach the picture or screenshot of both test results in the Feedback Form below, in order for us to provide further assistances.

Please make sure to attach the required  screenshot(s) in ONE file (i.e. Microsoft Word document, PDF, Image file) before submitting the form.

Quick Info

A Ping Test shows how long it takes for packets to reach host.

A Traceroute Test traces the route of packets to destination host from our server.

Intermittent  internet connection using Wi-Fi

1. Router Positioning

Most people underestimate the importance of picking a good spot for a Wi-Fi router. Even a small shift in positioning could end up being the difference between day and night.

i) High vs. Low

Put the router as high up as possible to extend the broadcasting range of the radio waves. This also helps clear the  router of possible interferences.

ii) Concrete & Metals

Make sure your router isn't blocked by  any other objects, especially devices that are electronic. Also, avoid  placing your router in your basement as this area is usually enclosed by a  lot of concrete, which can be almost impossible for Wi-Fi signals to penetrate.

iii) Distance to Router

The further away from your router you  get, the weaker the Wi-Fi signal. Therefore, the best option is to place your  router as close to your devices as possible, but this is only practical if  you have one main area where you tend to use your devices.

Otherwise, you should place your router near the center of your home. After all, Wi-Fi broadcasts in 360 degrees, so it doesn't make sense to put  it at one end of the house.

2.  Wireless Interference & Noise

You've probably never noticed but there are wireless signals all around you wherever you go and  they're passing through you all the time. From where? Electronic devices, Wi-Fi routers, satellites, cell towers, and more.

Although Wi-Fi is supposed to be on a different frequency than most of these devices, the amount of radio noise can still cause interference. Some common causes of interference include:

i) Microwaves

ii) Bluetooth Devices

iii) Cordless Phone

3.  Surrounding Wi-Fi signals

A truth of the modern world is that every  household has their own Wi-Fi network, which can cause issues with channel overlap. This can be somewhat problematic in a townhouse, but is especially problematic in housing complexes and apartments where there can be many routers within close proximity.

Which is why it's important that you pick a good channel in your  router settings. Modern routers can choose channels for you automatically,  but sometimes it's better to investigate and find the best channel yourself.

4. Usage

More likely, however, is that the people on your network such as friends, roommates, or family members are participating in bandwidth-heavy activities like gaming and streaming Ultrabox/Netflix.

Fortunately, if this is the case, you can prioritize your own network traffic by enabling Quality of Service in your router settings.

If the problem  persists, please run a Ping Test, Traceroute Test and attach the picture or screenshot of both test results in the Feedback Form below, in order for us to provide further assistances.

Please make sure to attach the required  screenshot(s) in ONE file (i.e. Microsoft Word document, PDF, Image file) before submitting the form.

Quick  Info

A Speedtest is a service that provides free analysis of Internet access  parameters, such as connection data rate.

A Ping Test shows how long it takes for packets to reach host.

A Traceroute Test traces the route of packets to destination host from our server.

STEP 1  

Press "HOME" button on your remote control.

STEP 2  

Navigate to Settings and press "OK".

STEP 3  

Navigate to Display and press "OK".

STEP 4    

Navigate to Resolution and press "OK".

STEP 5    

Navigate to your preferred selection and press “OK”.

STEP 6    

Select Yes, continue and press "OK" to confirm on the changes.    

Otherwise, select No, go back to cancel.

1. Please use a LAN ethernet cable and connect your computer/laptop to the back of the Maxis Router.

2. You may open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox, etc.

3. On the address bar, please go to http://192.168.1.254 and the page below will appear.

    The default login of the router as below. If you have done a configuration on your router and changed your password previously, please use the password you have previously set.

    Username: administrator

    Password: Router S/N (Available on the sticker at the back of the router)

4. Once you have successfully login, the router's web-based setup page will appear.

5. From the left menu, select WIRELESS to access the screen below.

6. You may change the Network Name (SSID) and the Password to follow your preferences, then scroll to bottom and click "Apply"  for the changes to take  place.

7. A warning box will popup, click "OK" for the changes to take place and reconnect to the new wireless name with the new password once completed.

8. Please wait until the connection reestablish.

For customers that would like to subscribe to Multiroom with a box installation,

(i) customers on the old packages (example Family Pack, Starter Pack, Value Pack, Super Pack or Super Pack Plus) will have to subscribe to our new packages first by sending "Switch" to 03-9543 3838 via WhatsApp;

(ii) customers on the new Astro packages can subscribe by visiting product.astro.com.my/multiroom or WhatsApp "Hi" to 03-9543 3838.

Yes, until 31 August 2022, customers can subscribe to the Movies Pack for only *RM59.99/month or the Platinum Pack for only *RM99.99/month for 6 months as well as the Premium 1 or Premium 3 Pack for only *RM99.99/month for 6 months until 30 October 2022 and be entitled to access Disney+ Hotstar as part of their Astro subscription. To find out more about our latest promotions, please visit promotions.astro.com.my. 

Please refer to these FAQs for more information, or click here to learn more and sign up for the Ulti Box. Alternatively, you may call 03-7481 8000 to get in touch with an Astro representative.

1. Ensure power cable  is connected tightly.    

2. Try to use another power socket /  power source to eliminate faulty power sockets/power sources which  could cause the issue.

3. If the issue persists, submit your feedback form for further assistance.

Yes, the monthly subscription fee will be prorated into your Astro bill.

Astro's Plug & Play Box is our latest box where users can enjoy the latest Astro box simply by connecting it to the TV and internet. There is no longer a need to schedule or pay for an installation. By connecting your Plug & Play Box to home broadband, you will be able to-do the following:

• Watch your channels over the Internet. No more rain fade!
• Never miss your favorite shows again as you can stream LIVE events from the beginning, or simply pause and resume the program as you wish.
• Access a library of over 110,000 videos on demand. Catch-up or binge-watch full episodes whenever you like.
• Access your recordings anytime on TV or the Astro GO app via Cloud Recording.

Other features include pause on TV and continue watching on the Astro GO app, enhanced search capabilities and more.

STEP 1
On your remote, press the Home button and the Home Page will be displayed your screen. 



STEP 2
Navigate to SETTINGS.



STEP 3
Navigate to Profile Selection on Startup and press “OK”.



STEP 4
Navigate to your preferred selection and press “OK”.



STEP 5
Navigate to Save and press “OK”.

No. Starting 1 April 2024, for new customers and current customers looking to switch their Asian Favourites, our Asian Favourites options will be:

• Viu Premium
• Indonesian Favourites
• Indian Favourites

To cancel your Multiroom (Smart TV) subscription, please call us at 03-9543 3838.

Astro introduces Liga Malaysia for all Astro customers to watch the Malaysian Football League’s Liga Malaysia competitions LIVE, comprising Perlawanan Sumbangsih (Piala Sultan Haji Ahmad Shah), Liga Super, Piala FA and Piala Malaysia live in HD on Astro Arena (CH801), Arena Bola channels (CH803 and CH804) and stream on Astro GO until further notice.

To reconnect your Astro account, please check your Account status, Bill Summary and pay on Astro Quick Pay. Your disconnected services will resume within 1 hour after you have paid your "Total Overdue Charges"

STEP 1
Check the Audio settings on your box and set to Auto.
Refer guide to change Digital Audio Settings.

STEP 2
If issue persist, check if there is any 3rd party device (sound system/hdmi splitter) connected between box and TV.

STEP 3
If using 3rd party devices, bypass/remove 3rd party device and make sure HDMI cable connected directly from box to TV.

STEP 4
If issue persist, connect to Live Agent via WhatsApp for help.

This error indicates that you are streaming on Astro GO while being connected to a VPN. Please close your VPN application and try streaming again.

If you are still having issues, proceed to submit report via WhatsApp or Feedback Form.

If you would like for more information, kindly visit our Multiroom page via Astro website https://www.astro.com.my/multiroom

To view the terms and conditions, click here.

STEP 1
On your remote, press the Home button and the home menu will be displayed on your screen.



STEP 2
Navigate to Profile.



STEP 3
The Profile Selection Screen will be displayed.



STEP 4
Navigate to Add Profile.



STEP 5
Choose your Profile.



STEP 6
Input the Profile Name and navigate to DONE.



STEP 7
Choose the Age Group of the new profile and press "OK".



STEP 8
Your new profile will be shown in the Profile Selection Screen.

You may contact Astro's Contact Centre (03 - 9543 1543) to process the cancellation.

The Mesh WiFi device(s) needs to be returned upon service termination via an arranged pick-up by our installers.

No additional fees will be charged upon your relocation. However, you are required to notify Astro of your move. Please refer to Astro's General T&Cs for more information.

No, the Mesh WiFi add-on with Astro Fibre is available as subscription service and will not be tied to any device contract.

The Malaysia Communication and Multimedia Commission (MCMC)has issued a directive to all telecommunication companies (telcos) to block the sending and receiving of SMS with URL links. The move is aimed at preventing users from becoming victims of online scams. This exercise is applicable for all person-to-person SMS with URL links sent to or received from local and international mobile numbers, which has already taken effect as of 2 May 2023.

We would recommend the following browsers for a smooth verification process:

• Google Chrome

• Microsoft Edge

• Mozilla Firefox

• Safari

You may register up to four (4) devices.

To remove devices on Astro GO, click on Settings > Registered Devices to view and remove a device(s) from the list of devices registered to your Astro ID.

Astro does not provide installment plan facilities. You are advised to pay your charges before the due date, as per your monthly bill statement.

For any technical issues, you may visit Astro's Help & Support page or contact Astro via WhatsApp at 03-9543 3838 by typing PNP.

You will be contacted by Astro via SMS/call at the end of your 24 months speed upgrade period. Customers who choose to remain the upgraded speed after 24 months will be charged as per the monthly subscription fee of the upgraded speed plan from the next month onwards and customers who choose to downgrade to their initial subscribed speed plan will not be charged any additional fees.
 
Situation 1:
Customer is subscribed to the 50Mbps Astro Fibre plan and is entitled to receive a free 100Mbps speed upgrade for 24 months. If the customer chooses to downgrade back to 50Mbps at the end of the 24-month period, no additional charges will apply.
 
Situation 2:
Customer is subscribed to the 100Mbps Astro Fibre plan and is entitled to receive a free 500Mbps speed upgrade for 24 months at RM129/month. If the customer chooses to remain with the upgraded speed of 500Mbps at the end of the 24-month period, they will be charged RM189/month* from the 25th month onwards.
 
*This price might differ depending on the offer or promotion
 

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Settings.

STEP 3

Navigate to Video Resolution and press “OK”.

STEP 4

Navigate to your preferred selection and press “OK”.

Recommended to select Auto.

STEP 5

Navigate to Save and press "OK" to confirm your selection if able to read the text properly.

Otherwise, navigate to Cancel to revert to previous settings.

Please call our Customer Contact Centre or WhatsApp "DH Help" at 03 9543 3838 to cancel your Disney+ Hotstar 3-months add-on pass with Astro.