STEP 1  

Press "HOME" button on your remote control.

STEP 2  

Navigate to Settings and press "OK".

STEP 3  

Navigate to Display and press "OK".

STEP 4    

Navigate to Resolution and press "OK".

STEP 5    

Navigate to your preferred selection and press “OK”.

STEP 6    

Select Yes, continue and press "OK" to confirm on the changes.    

Otherwise, select No, go back to cancel.

If you're trying to visit a website and it won't load, but others do, there could be a variety of causes. If the site itself is down, there's not much you can do but wait.

If you can load the  site on other computers or devices (make sure you try different means of connecting to the internet), there may be an issue with your computer or network.

There are some quick fixes that will solve most problems, but you may have to get your hands a little dirty.

1. Try loading the site on a different device.

Try loading the website on your phone or on another computer. If the website loads on the other device, the problem lies with your computer.

If the website doesn't load on another  device, the problem is either with the network or the website itself.
 

2. Restart your computer.

Oftentimes, a simple reboot will fix the problem you're having. Reboot your computer and test the website again.
 

3. Try loading the site in a different browser.
 

There may be some settings configured incorrectly on your browser. Try a different web browser to see if you can  load the website.
 

4. Temporarily disable your antivirus program.

Your antivirus software may be interfering with your ability to load certain websites.

Try disabling the software and then loading the site again. Make sure you enable it again once you have identified the problem.
 

5. Reset your modem and router.

Traffic to or from a certain website may be getting tripped up by your  modem or router. Resetting these devices may allow you to access the website again.
 

6. Check your computer's date and time settings.

If your date or time is set incorrectly, you may not be able to  connect to secure (https://) websites.

Check your computer or mobile device's clock to make sure that it is  set to the correct time and date.
 

7. In the event the problem persists, please provide below details for further escalation:

   i. List of websites effected.

   ii. Run the Speed Test via LAN (cable) and Wi-Fi connection - Please click here for Speed Test guideline.

   iii. Run the Traceroute Test - Please click here for Traceroute Test guideline.

   iv. Run the Ping Test -  Please click here for Ping Test guideline.

Once you've  gathered all the results, kindly send them all through the Feedback Form below.

Quick Info
A Speedtest is a service that provides free analysis of Internet access  parameters, such as connection data rate.
A Ping Test shows how long it takes for packets to reach host.
A Traceroute Test traces the route of packets to destination host from our  server.

You may proceed with the following troubleshooting steps and it shouldn’t take you much longer than 15 minutes.

1. Please standby computer/laptop to access to the internet and connection must be via LAN cable (connect the LAN cable to the blue port in Cisco Router and direct to computer/laptop).

2. You may open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox and etc.

3. On the address bar, please go to http://192.168.1.1 and below page will appear.

‍

‍

4. Type the Username and Password as below. Then click "OK". (These are the defaults, if you have done previous configuration on your router the password may be different).

Username: admin

Password: admin (or time123)

5. Click "OK" when a Warning prompt that says,” Using this advanced utility to change your router settings could disable your network” appears. Below display will appears.

6. On the setup page, click the Wireless tab then click on the Basic Wireless Settings sub-tab.

7. On the Configuration View section, click the Manual radio button. Choosing the Manual setup will allow you to adjust your wireless channel according to your preference.

8. Click Wireless Security to view the security settings of your wireless network. Take note of the Security Mode and the Passphrase.

For the example below, the Security Mode used is WPA2/WPA Mixed Mode.

The Wireless name is called Network Name (SSID) and the Passphrase is your wireless password.

‍

9. Now that you have the Wireless name and Password, you are ready to connect your wireless computers and devices to the network.

10. You may change the Network Name (SSID) and the Passphrase to follow your preferences and please ensure save the changes made. Please reconnect to the new wireless name with the new password once completed.

‍

STEP 1

‍

Try to change channels on your Astro  remote.

INDICATOR: LED blinking 3 times / NO LED blink

SOLUTION: Replace new battery

Proceed to Step 2.

‍

INDICATOR: LED blinking 1 time

Confirm it's not your Astro remote faulty, let's proceed to Step 3.

‍

STEP 2

If issue remain after the battery replacement, this might be due to a faulty Astro remote.

Try changing the channel manually directly from the box front panel (If any).

If it's working, you might need to  replace your Astro remote.

You may walk-in to our nearest Customer Service Center for the replacement.

STEP 3

You need to refresh the box setting by initiate manually from box front panel.    

Refer to Refresh Box setting Guide steps here.

If you subscribe to Astro Fibre between 1 October 2023 to 23 November 2023, you may still get the speed boost by calling in to our Customer Contact Centre at 03-9543 3838 and re-contracting with us. Kindly note that your account will restart with a new 24-month contract.

Astro GO+ is a service add-on that: 

• Enables the simultaneous viewing of Astro GO for up to 4 users/devices. 
• Increases the cloud recording storage from 200 hours up to 1500 hours. 

STEP 1

On your remote, press the “HOME” button and the home menu will  be displayed at the bottom of your screen.

STEP 2

Navigate to SETTINGS and press “OK”.

STEP 3

Navigate to STB  DIAGNOSTICS and press “OK”.

‍

STEP 4

Select the “Network” tab in the STB Diagnostics page.

Please ensure the Tunes service multicast  status is Multicast Up.

If the status is Multicast is Not Available, please reboot your box and router before verifying this status.

If issue persists, please submit the issue in our Feedback Form and attach a picture of your Network tab of the STB Diagnostics for assistance.

Unfortunately, only Astro Fibre customers who subscribe from 24 November 2023 to 31 May 2024 are eligible for this free speed upgrade. However, you may still get the speed boost by calling in to our Customer Contact Centre at 03-9543 3838 and re-contracting with us. Kindly note that your account will restart with a new 24-month contract.
 

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Settings.

STEP 3

Navigate to TV Settings and press “OK”.

STEP 4

Navigate to your preferred selection and press “OK”.

STEP 5

Navigate to Save and press "OK" to confirm your selection.

You may verify if your speed plan has been successfully upgraded during the installation process with your Astro installer before sign-off. If you would like to confirm the status of your speed upgrade after installation, you may contact Astro’s Contact Centre at 03-9543 1543 and an Astro agent will be available to assist you immediately.  

Astro & Broadband offers Astro content with Astro Fibre, Maxis Fibre Broadband and Allo City Broadband for customers to enjoy the best entertainment through Astro while staying connected with high-speed internet.

With the current Astro & Broadband plans, customers will enjoy substantial savings by choosing their desired broadband speed from 30Mbps - 800Mbps to accompany their Astro packages.

STEP 1  

Press "HOME" button on your remote control.

STEP 2    

Navigate to Preferences and press "OK".

STEP 3  

Navigate to Auto Standby and press "OK".

STEP 4    

Navigate to your preferred selection and press “OK”.

STEP 5  

Select Yes, continue and then press "OK" to confirm on the changes.    

Otherwise, select No, go back to cancel.

Please see the table below for the offers available for residential customers.

‍

Notes:

·      Installation fee includes Government tax.

·      Monthly subscription fee does not include Government tax.

·      The Ulti Box offers in the table above include a contract Period of 24 months with a pro-rated early termination fee of RM600 (excluding Government tax).

·      The installation fees listed in the table above applies for a standard installation of the Ulti Box in your home. Additional charges may apply for non-standard installation.

·      * Existing customers with monthly pack >RM100 are recommended to select Ultra Box @ FREE Installation fee with 24 months contract.

·      ** New customers with monthly pack >RM100 are recommended to select Ultra box @ RM99 installation fee with 24 months contract.

·       You may visit https://product.astro.com.my/box to find out more details about Astro Ultra Box.

·       Ulti Box installation is free for Astro & Broadband customers for Starter Pack and above. A separate list of TNC’s will be applicable for this offer.

Yes, you may cancel your Astro Fibre order before service activation, however, kindly note that there is a cancellation charge of RM212 (inclusive of SST) for any service cancellation done 48 hrs before scheduled appointment.

If you are already subscribed to the Movies/Premium 1/Premium 3/Platinum Pack, you are automatically entitled to access Disney+ Hotstar. Therefore, you will not be able to add on the Disney+ Hotstar 3-months pass. 

For customers with the Ultra or Ulti Box, you are required to return only the Astro box along with the Smart/SIM Card. There  is no requirement to return the remote control, power cables or satellite  dish/outdoor unit (ODU).

For customers on other Boxes, you are required to discard them (and their accompanying devices such as the Smart/SIM Card) only at registered collection centers for proper handling and management of e-waste in an environmentally sound manner. Click here to find a registered collection center near you.

Advance payment can be made via credit/debit card or online banking.

Yes, you can upgrade your internet speed. However, speed downgrade is not allowed.

STEP 1

Check on your TV input to ensure correct input selected.

If issue remains, switch off the power for your box and make sure that the adapter's power light is off.

STEP 2

Unplug the HDMI cable from your box and plug it back in securely.

STEP 3

Switch on the power for your box and make sure that the adapter's power light is on. Please wait for 5 minutes.

STEP 4

Turn on your box. You should no longer be experiencing this problem.

If issue persist, please submit the issue on our Feedback Form with the error details and provide  sim card number for assistance.

From 8 October 2021 onwards, Astro will be ceasing the daily passes (e.g. 3, 5, 7 & 30 days passes). Please subscribe to the relevant packs to continue enjoying your favourite content. Stay tuned for more exciting offers. Thank you.

To request for a move, you may choose to:

1. Self-serve by logging in to My Astro app and follow the steps below:

Step 1: From Account tab, choose Installation address under Subscription.
Step 2: Click "Relocate”.
Step 3: Verify your identity via OTP.
Step 3: Fill in the OTP that you receive and proceed by clicking "Verify"
Step 4: Confirm the Address, a support ticket will be created.

2. Submit your feedback via below link: https://support.astro.com.my/feedback-form

Step1: Choose Feedback Type

• Type: Technical issues
• Issue: I want to enquire about installation/ relocation

Step2: Fill in the form and click “Submit” support ticket.

You may use the same feedback form and choose below options.

Category: I would like to request for refund

Sub Category: Request for Refund

Starting 21 June 2022, all new digital sign-ups for TV packs on astro.com.my will now include access to the Astro GO app within an hour upon checkout of your first month subscription fees (excluding tax). Install the app on your smartphones, tablets or computers and you can start streaming even before your Astro box arrives!

Customers with a Movies subscription via Movies, Premium 1, Premium 3 and Platinum packs will be able to access Disney+ Hotstar on the Ultra box.

Alternatively, customers can add on the 3-month Disney+ Hotstar pass for RM54.90. Subscribe to Disney+ Hotstar via astro.com.my/Disney.

For more support and options for your subscription, please WhatsApp us at 03 9543 3838 and type DH Help. Alternatively, you may visit astro.com.my/Disney for more information.

Unfortunately, you will no longer be able to access Disney+ Hotstar via Astro if you cancel your Astro subscription with Disney+ Hotstar entitlement. 

Once you have received the eKYC link, you need to complete the verification within 3 days.

Your documents will be handled in compliance with standards set by PDPA (Personal Data Protection Act 2010) and will not be used for other means without your specific consent.

For any NJOI-related information, please visit the NJOI Help & Support page at https://purchase.njoi.com.my/en-support

Yes, another person may register their credit card to your account's auto-debit facility. If you are performing this action via our call centre, the respective card holder is required to be present.

By keying in the 10-digit account number, Astro will be able to provide better self-service options, as it allows Astro to customise automation options based on the needs of each customer's account.

STEP 1    

Choose your language preferences for both Menu Language and Info Language. Then, press "OK".

STEP 2    

Select you box operating mode and press "OK".

STEP 3    

Select the resolution supports by your TV and press "OK".

STEP 4    

Press "OK" to proceed to the next screen.

STEP 5  

Please select the LNB type and press "OK".

STEP 6    

Select this as the Entry Point and press "OK" to confirm your selection.

STEP 7    

Signal reading results for Tuner 1 and Tuner 2 screen will be displayed. Then, press "OK" to proceed to next screen.

STEP 8    

Select Yes, continue and press "OK" to connect to Wi-Fi network.

STEP 9    

Please wait while the box scanning for the available Wi-Fi network.

STEP 10    

Select your Wi-Fi network and navigate to "Connect".

STEP 11    

Please enter the password to connect to your network and press "OK".

STEP 12    

You are successfully connected when this screen appears.

When Band Steering is disabled, you will see two separate WiFi SSID based on its frequency bands. Example:

i.SSID: SSID2G, Password: 1234567

ii.SSID: SSID5G, Password: 4567890

*WiFi SSID (Service Set Identifier) is the name of your wireless network, also known as Network ID. It is viewable to anyone with a wireless device within reachable distance of your network.

If you accidently clicked “delete my account” on the Astro Fibre app, you will bedirected to submit a request via Feedback Form as the image below.

If you submit a request, our Astro representative will get back to you within 3 business days to learn more about the issue(s) you are currently facing with the app. Customers may proceed to permanently delete their account during the call if they wish. Once complete, your Astro ID will be deleted and you will be unlinked from all Astro apps and services including partner apps that are associated with your Astro ID including Astro GO, My Astro, Astro Awani, Syok, beIN SPORTS CONNECT, iQIYI, TVBAnywhere+,HBO GO, Gempak, XUAN, Astro Ulagam etc.

You may create another Astro ID by following the steps here and re-link your new account to all Astro apps and services, including partner apps.

For My Astro App Users 
Go to the "Account' tab and scroll to "Personal Info' section. Click "Name & contact info' to view and update your personal contact information.

For Ultra and/or Ulti Users 

1. Launch the My Astro app on your Home screen and you will land on your My Astro account dashboard. Then, press the yellow button on your Astro remote control to visit your "Account details".
2. Press the down button to view the "Personal info".
3. Press the left button and focus on the edit icon for the contact details, press on "OK" to change your contact details.

Please refer to these FAQs and Terms and Conditions for more information.

For more support and options for your subscription, please WhatsApp us at 03 9543 3838 and type DH Help. Alternatively, you may visit astro.com.my/Disney for more information.

Starting 23 August 2022, Astro customers will progressively be able to access Disney+ Hotstar via the Ulti Box, in addition to the Ultra Box, mobile app and website. 

There are 2 methods of setting maturity ratings restriction on Netflix: 

‍

Method 1 – Create a Kids Profile in Netflix App on Ultra/Ulti Box 

1. On the Netflix home menu, select “Switch Profile” 

2. Select Add Profile.  

3. Name the profile. 

4. Select Kids. Kids profiles have a logo 'Kids' on the profile icon so they are easy to identify.  

5. Select Continue. The new profile will show on the list of profiles on your account. 

‍

Method 2 – Manually set Viewing Restrictions for each profile 

1. Go to https://www.netflix.com/profiles/manage

2. Select a Profile. 

3. Under Maturity Settings, select Edit. 

4. Enter your Netflix password. 

5. You may select the desired Maturity Rating settings or add a particular title restrictions for the profile. 

6. Select Save. 

For more information kindly visit: 

• https://help.netflix.com/en/node/114275

• https://help.netflix.com/en/node/114276

At this point in time, the Disney+ Hotstar app on the Ultra or Ulti Box does not support Dolby audio. We are working to enable this in a future update.