As a rule of thumb, this issue might happen when the devices are not equipped with minimum requirement above that supports the subscribed internet speeds:

• WiFi technology
• Network Interface Card (NIC)

As mentioned above however, it is important to note that despite meeting the device minimum requirements, it is not a guarantee that devices connected over WiFi will be able to achieve maximum subscribed internet speeds due to the following:

1. Bad WiFi signal quality and coverage across the area due to:
   • Distance from the RGW/Mesh AP with connected device
   • Obstruction within the house (walls, metallic surfaces)
   • Interference with other household appliances
2. Congested bandwidth
   • If there are too many devices connected to the WiFi network, then the bandwidth might be overloaded with traffic hence, slowing down the speed
3. Devices are connected using WiFi instead of wired using LAN.
   • It is important to note that wired connection offers better reliability and speed over WiFi.
   • WiFi is more prone to interference compared to a wired connection which causes lower speeds and dropped signal.
4. Router Positioning: Most people underestimate the importance of picking a good spot for a Wi-Fi router. Even a small shift in positioning could end up being the difference between day and night:
   • High vs. Low: Put the router as high up as possible to extend the broadcasting range of the radio waves. This also helps clear the router of possible interferences.
   • Concrete & Metals: Make sure your router isn’t blocked by any other objects, especially devices that are electronic. Also, avoid placing your router in your basement as this area is usually enclosed by a lot of concrete, which can be almost impossible for Wi-Fi signals to penetrate.
   • Distance to Router: The further away from your router you get, the weaker the Wi-Fi signal. Therefore, the best option is to place your router as close to your devices as possible, but this is only practical if you have one main area where you tend to use your devices. Otherwise, you should place your router near the center of your home. After all, Wi-Fi broadcasts in 360 degrees, so it doesn’t make sense to put it at one end of the house.
5. Usage
   • More likely, however, is that the people on your network such as friends, roommates, or family members are participating in bandwidth-heavy activities like gaming and streaming Ultrabox/Netflix.
   • Fortunately, if this is the case, you can prioritize your own network traffic by enabling Quality of Service in your router settings.
   • If the problem persists, please run a Ping Test/Traceroute Test and attach the picture or screenshot of both test results in the Feedback Form below, in order for us to provide further assistances. Please make sure to attach the required screenshot(s) in ONE file (i.e. Microsoft Word document, PDF, Image file) before submitting the form.

Note:
Astro and its service providers will not offer any guarantees for compatibility of the customer's equipment (e.g., Personal Computer, Notebook, printers) nor provide on site troubleshooting for WiFi service issues related to the customer's equipment.

Ready to start watching on Astro Go? Simply log in using the Astro ID linked to your Astro account on a supported device. If you haven’t created your Astro ID yet, you can refer to the guide here. Then, follow the step-by-step guide below and you’ll be ready to enjoy Astro Go in no time.

Step 1: Tap on the download link to download Astro Go app on your device.

Step 2: Tap on "Get" or "Install" to download Astro Go app into your device.

Step 3: Upon downloading, launch the app on your homepage and sign in with your Astro ID.

Don’t have an Astro ID? Create one by following these steps.

Step 4: You’re all set! Enjoy a world of entertainment in the palm of your hand.

Supported mobile devices include:

- iPhones and iPads: iOS 16.0 or later.

- Android smartphones and tablets: Android 7.0 or later.

To watch on your computer or laptop, visit astrogo.astro.com.my using your web browser.

There will be no penalty fee if you choose to cancel your iQIYI VIP subscription. Your cancellation will take effect upon your current entitlement expiry date. Kindly note that if you cancel your subscription within 24 hours before your entitlement expiry date as reflected in the iQIYI app (not according to Astro billing cycle), your subscription may be auto renewed.

For technical visit, the current fees will remain unchanged i.e.: 8% Service Tax absorbed by Astro. As for installation fees, current fees will remain unchanged i.e.: 6% Service Tax has already been included in installation fees, as 2% will be absorbed by Astro.

1. Please use a LAN ethernet cable and connect your computer/laptop to the back of the Maxis Router.

2. You may open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox, etc.

3. On the address bar, please go to http://192.168.1.254 and the page below will appear.

The default login of the router as below. If you have done a configuration on your router and changed your password previously, please use the password you have previously set.

Username: administrator

Password: Router S/N (Available on the sticker at the back of the router)

4. Once you have successfully login, the router's web-based setup page will appear.

5. From the left menu, select WIRELESS to access the screen below.

6. You may change the Network Name (SSID) and the Password to follow your preferences, then scroll to bottom and click "Apply" for the changes to take place.

7. A warning box will popup, click "OK" for the changes to take place and reconnect to the new wireless name with the new password once completed.

8. Please wait until the connection reestablish.

After 62 days of non-payment, your broadband account will be terminated, and an Early Termination Fee (ETF) will be applied for the remaining contract. If you would like to continue with the service, you need to clear the outstanding balance and apply a new account.

Yes, you can! Simply South is available for all Astro customers. Kindly reach out us via WhatsApp by typing “Hi” at 03-9543 3838 to know more!

Users can easily access all their streaming Apps such as Netflix, Disney+, Viu etc by clicking the “APPS” button on their remote control. After clicking this button, they will be brought to the Apps rail under the home page.

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Settings.

STEP 3

Navigate to Remote Control Settings and press "OK".

STEP 4

Follow the steps appear on the screen to sync your Astro remote.

Currently, Maxis, Digi, Celcom, TuneTalk, U-Mobile, Yes, XOX and Webe.

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Settings.

STEP 3

Navigate to Network Settings and press "OK".

STEP 4

Navigate to Network Diagnostics and press "OK".

STEP 5

Network Diagnostics screen will be displayed accordingly.

Kindly refer to the steps below to log in:

STEP 1

Click on the Disney+ app logo under the Apps rail on your Home page

STEP 2

Select Log In

STEP 3

Scan the QR code or visit the website on screen to log in

STEP 4

Key in the on-screen code to pair your TV

STEP 5

Enter your email address or mobile number associated with your Disney+ subscription

STEP 6

Select whether you want your OTP to be sent to your email address or mobile number

STEP 7

Key in your OTP

STEP 8

Review and agree to the Disney+ terms

Only applicable to first time log in to Disney+ after the app migration

STEP 9

Create your user profiles

Only applicable to first time log in to Disney+ after the app migration

STEP 10

Select your user profile on your TV screen to start watching

Sun NXT is an app that offers content in six different languages: Tamil, Telugu, Malayalam, Kannada, Bengali, and Marathi. The app carries a large collection of movies, including Tamil classics and latest releases. Sun NXT also offers a variety of content ranging from TV shows, live TV shows, news, music videos, kids' shows, comedy clips, to trailers.

Starting 29th April 2025 onwards, Sun NXT will be available on Astro via two tiers:

• Sun NXT Lite: Complimentary for Indian Favourites/Maharaja Pack customers only, with content similar to 6 Sun channels (SUN TV HD, SUN MUSIC HD, SUN LIFE, SUN NEWS, ADITHYA & KTV,) and Video On Demand (VOD) content (TV shows), with more than 2000 hours of content.
• Sun NXT Premium: Available to all Astro customers for only RM 25.00/month (RRP RM30.80) with an expanded access to the full Sun NXT library.

You may manage your Multiroom (Smart TV) subscription via My Astro app. Download here or on your App Store or Google Play Store.

Starting 1 January 2026, Astro is required under Section 82C(11) of the Income Tax Act 1967 to submit any monthly invoice of RM10,000 or more directly to LHDN. This process does not require customer consent and is part of regulatory compliance. Rest assured, it will not affect your billing or Astro services.

If you have a box that is not an Ultibox or Ultrabox, please recycle your box at a registered collection centre that will properly manage the boxes in an environmentally friendly way. Click here to find a registered collection centre near you.

For your old Ultibox or Ultrabox, once your Plug & Play Box has been activated, a courier service will reach out to you within TWO (2) weeks for a time for them to pick up the old Astro box and SIM card/Smartcard.

1. Ensure that all cables have been plugged out of the old Astro box. To remove the white satellite cable from your old Astro box, simply hold the cable, twist, and gently pull.
2. Set aside these items to be ready for our delivery partner to pick up from you

- Old Astro Box
- Old Astro Smartcard/SIM Card (leave this in your Astro Box)

1. When a courier arrives at your residence, do confirm that they are collecting items on behalf of Astro.
2. Allow the courier to check the serial number of the Astro box.
3. Hand them all the items for return, and you're done!

Refund fee is subject to your processing bank. However, Astro did not impose refund processing fee.

The final bill will be generated on the next cycle date once Astro account has been terminated.

If you accidentally delete your mesh:

1. Login to the Astro Fibre App.
2. Go to Network > click on the plus (+) sign.
3. Enter your serial number (starts with SRXxxxxx).
4. Click OK to add the mesh back.

To access these streaming apps, you would need to upgrade to the Ultra or Ulti Box by visiting product.astro.com.my/box. Alternatively, you may also reachus via WhatsApp by typing "Hi

We would need you to run few tests in order for us to understand your issue and to assist you in fixing the problem.

You may proceed with the troubleshooting steps below which should not require any longer than 15 minutes.

1. Please run each of the tests according to your your Laptop/PC Software.
2. Compile the pictures / screenshots of your test results in one file (i.e Microsof Word document, PDF file) and attach them in the Support Ticket below in order for us to assist you further:
   • List of websites effected.
   • Run the Speed Test via LAN (cable) and Wi-Fi connection - Please click here for Speed Test guideline.
   • Run the Traceroute Test - Please click here for Traceroute Test guideline.
   • Run the Ping Test - Please click here for Ping Test guideline.
3. Once you've gathered all the results, kindly send them all through the Feedback Form below.

Quick Info
A Speedtest is a service that provides free analysis of Internet access parameters, such as connection data rate.

A Ping Test shows how long it takes for packets to reach host.

A Traceroute Test traces the route of packets to destination host from our server.

You can access your Viu Premium account on up to five (5) devices at a time. To ensure a
smoother streaming experience, please sign out from any unused devices.

STEP 1: Confirm TV Input Source
Use your TV remote to select the correct input:

HDMI for HDMI cable users.
AV/Video for RCA cable users.

Cycle through inputs (HDMI1, HDMI2, AV1, etc.) until the Astro box screen appears.

STEP 2: Check Cable Connections

HDMI Users:
Ensure HDMI cable is firmly connected to both the Astro box and TV. Try a different HDMI port or cable if needed.

RCA Users:
Match red (audio right), white (audio left), and yellow (video) cables to the correct ports. Ensure cables are not loose or damaged.

STEP 3: Power Cycle the Astro Box

Turn off the Astro box.
Unplug the power cable from the wall socket.
Wait 10 seconds, plug it back in, and turn it on.

STEP 4: Test with Alternative Port or Cable

Try a different HDMI or AV port on your TV. Use a different HDMI or RCA cable to rule out faults.

STEP 5: Contact Astro Support

If no improvement seen, please submit the issue in our Feedback Form and attach a picture of your smart card number for assistance or WhatsApp us at 03-95433838.

Starting 7 October 2026, Disney+ will transition to a new Disney+ app experience. Astro customers can continue enjoying Disney+ via Astro with no changes to their Disney+ subscription or monthly fee.

Customers who stream via Astro Ultra or Ulti Box will have the new app made available automatically, while customers who stream on personal devices will simply need to download the new Disney+ app to continue watching Disney+.

Existing customers can sign in using the same email address or mobile number associated with their existing Disney+ account.

For further information and support relating to the Disney+ app experience or app-related features, please visit the Disney+ Help Centre.

Option 1

1. Please turn off all devices (Modem and Router). By restarting your modem, you can isolate the possibility of overloaded processes in the modem, which would  impact its performance.    

2. Ensure the fiber cable from your wall socket and modem is securely connected.

Modem connection with Copper Cable

Notes: You might be connected to LAN 1 if backbone is Maxis

Router connection

3. Please make sure the LAN cable is connected properly from router (Port 1-4 - Yellow port) to PC/Laptop.

4. If the issue persists, submit your feedback form and attach your modem light indicator picture/video for further assistance.
 

Option 2/ Option 3/ Option 5/ Option 6

1. Please turn off all devices (Modem and Router). By restarting your modem, you can isolate the possibility of overloaded processes in the modem, which would  impact its performance.

2. Ensure the fiber cable from your wall socket and modem is securely connected.

Notes: You might be connected to LAN 1  if backbone is Maxis

Router connection

4. Please make sure the LAN cable is connected properly from router (Port 1-4 - Yellow port) to PC/Laptop.

5. Please make sure both cables on Router (Any Yellow port) and Astro Decoder (Network Port behind decoder) are properly inserted.

6. Switch on modem and router and please wait for 2 minutes to stabilise the devices after reboot.

7. If the issue persists, submit your feedback form and attach your modem light indicator picture/video for further assistance.

Option 4

1. Ensure Modem/Router are connected tightly to the power socket.

3. If the issue persists, submit your feedback form for further assistance.

You can record your favourite shows, save them to the cloud storage and watch it across any of your devices (Astro Box, Astro GO devices, Multiroom Smart TV).

STEP 1

Choose your language preferences for both Menu Language and Info Language. Then, press "OK".

STEP 2

Select you box operating mode and press "OK".

STEP 3

Select the resolution supports by your TV and press "OK".

STEP 4

Press "OK" to proceed to the next screen.

STEP 5

Please select the LNB type and press "OK".

STEP 6

Select this as the Entry Point and press "OK" to confirm your selection.

STEP 7

Signal reading results for Tuner 1 and Tuner 2 screen will be displayed. Then, press "OK" to proceed to next screen.

STEP 8

Select Yes, continue and press "OK" to connect to Wi-Fi network.

STEP 9

Please wait while the box scanning for the available Wi-Fi network.

STEP 10

Select your Wi-Fi network and navigate to "Connect".

STEP 11

Please enter the password to connect to your network and press "OK".

STEP 12

You are successfully connected when this screen appears.

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Settings.

STEP 3

Navigate to STB Diagnostics and press "OK".

STEP 4

Select Advanced Diagnostics and press "OK".

STEP 5

Details information of Advanced Diagnostics screen will be displayed.

STEP 6

Press down arrow on your remote to get more information.

Huawei K562e

By default, the band steering featured is disabled. Follow these steps to enable it.

Note: Band Steering is called Dual-band Combination in the router web interface.

1. Please connect your computer or laptop to your Astro Fibre router using LAN cable. Your LAN cable must be connected from the yellow port of Astro Fibre router (Any available port).
2. Once connected, open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox and etc.
3. On the address bar, type http://192.168.100.254 and below page will appear.

Login using your username and password if you have changed the router login setting. Otherwise, your default router login is as per below.

Username: user
Password: user

4. Once you have successfully logged in, the router's web-based setup page will appear.

5. At the top of the page, click Wi-Fi to configure the WiFi parameters.

6. Click on Dual-band Combination button to enable the Band Steering.

7. A pop-up message will appear showing "The device network may be disconnected when dual-band combination is enabled". Click "OK" to proceed.

8. Set the Wi-Fi name and Wi-Fi password based on customer's preferences. Then click "Apply" for the changes to take place.

Please reconnect to the new Wi-Fi name with the new password once completed.

Surcharge is imposed by 3rd party payment collection partners for services rendered. Kindly note that customers may be charged a surcharge per transaction when bill payments are made via the following methods:-

Bill payments at selected petrol stations, convenience stores, retail/mobile shops, kiosk, and e-wallets may incur a surcharge of up to RM0.50 per transaction by the appointed collection agencies of RMS (formerly known as Razer/MOL), ATX, MobilityOne, and e-Pay.

· To find out more on how to make your bill payments, click here.

If you cancel your subscription before completing the 12-month contract period, an early termination fee may apply in accordance with your contract terms. The fee is calculated by multiplying your monthly subscription fee by the number of months remaining in your contract.

You have the liberty to manage device connection on your own.

Here's how you can pay your Astro bill on My Astro:

1. Open/Download the My Astro app or visit My Astro web
2. Login with your Astro ID
3. Go to Accont
4. Select Bills
5. Click 'Pay now' to proceed with payment
6. Choose your payment method
7. Upon successful payment, you will receive a record and your payment history will be updated

💳 Want to manage your Astro bills easily?

📱 Download the My Astro app to:
- View and download bill statements
- Check payment history
- Pay in just a few taps

"Payment Due Date" refers to the payment deadline for your Astro bills each month.

Yes, you can upgrade your Disney+ subscription plan. Upgrades take effect immediately and charges will be prorated accordingly on your bill.

You can upgrade your Disney+ subscription plan through the following methods:

a. Visit My Astro app or web

b. WhatsApp or call Astro’s Customer Service at +603 9543 3838

c. Visit your nearest Astro Store

Kindly refer to the steps below to upgrade your Disney+ subscription plan on My Astro app or web:

a. Log in to My Astro app or web

b. Go to Manage Subscription → Add-ons → Manage your add-ons

c. Select Disney+ Premium

d. Click Proceed

e. Review and confirm the order

Once you have received the eKYC link via SMS/email/astro.com.my, you can proceed to follow the instructions on the screen. You can check out the step-by-step image below for more info.

For MyKad/MyPR/MyTentera :

For Passport :

You will still need to authorise the transaction from your SecureGo registered device. 

Step 1: On another device, perform the transaction via My Astro app 

Step 2: Tap on the push notification you receive on your SecureGo registered device 

Step 3: Tap Approve or Reject to authorise the transaction, and you're done! 

You will only be able to watch Astro GO and/or Multiroom Smart TV on up to 2 devices at the same time as opposed to 4 devices with Astro GO+.

Your cloud recording storage will also decrease from 1500 hours down to 200 hours. Your stored recordings/downloaded shows that exceed 200 hours will also be removed.

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Guide.

STEP 3

Select the channel you would like to add to favourite list and press "OK".

STEP 4

Select "Add to Favourites" and press "OK".

STEP 5

You are successfully added the channel to favourite list when this screen appears.

STEP 6

Your selected channel will have a heart tagging after added as favourite.

STEP 1
Switch off the power of your box and make sure that the adapter’s power light is off.

STEP 2
Unplug the HDMI cable from your TV and plug it back in securely to other available HDMI port.

STEP 3
Switch on the power for your box and make sure that the adapter’s power light is on.
Please wait for 5 minutes.

STEP 4
Turn on your box. Do select the correct TV input.

------

If you're seeing a persistent blank screen after changing the display resolution on your Ultra/Ulti Box (for example, to 2160p), your TV may not support the selected resolution.

STEP 1

Switch off the power for your box and make sure that the adapter's power light is off.

STEP 2

Switch on the power for your box and make sure that the adapter's power light is on.

STEP 3

Press the standby button repeatedly after switch on the power.

The Startup Options screen will appear on your TV.

STEP 4

Press "987" to access the Advanced Startup Options menu.

Then, press "1" to initiate a reset setting.

STEP 5

Press "OK" to confirm restore to factory setting.

STEP 6

After the factory setting is restored, TV will turn blank.

Please wait until the box completes initiate setup.

STEP 7

Press "1" to initiate Linux download on the software.

STEP 8

Once completed, the following screen will appear on your TV.

Refer to Installation Setup guide here to complete the setup.

If you are an Astro subscriber
Step 1: Launch the Astro Smart TV app on your Smart TV.

Step 2: Select “Log In”.

Step 3: Scan the QR code OR visit astro.com.my/tvapp and enter the code on the screen.

Step 4: Enter your Astro ID (registered email or mobile number) and password. If you do not have an Astro ID, click on “Create now”.

Step 5: Once you have successfully logged in, the Astro Smart TV app will refresh automatically, and you will be able to access it.

If you are NOT an Astro subscriber
Step 1: Launch the Astro Smart TV app on your Smart TV.

Step 2: Select “Subscribe Now”.

Step 3: Scan the QR code to visit https://www.astro.com.my/#main and explore Astro’s packs or Multiroom (Smart TV).

Step 4: Once you have successfully subscribed, kindly follow Step 1 – 5 under “If you are an Astro subscriber” to log in.

No, the Service Tax is a tax payable entirely to the Government. Astro acts as a collection agent for the Government.

STEP 1
On your remote, press the Home button and the Home Page will be displayed on your screen.

STEP 2
Navigate to Profile.

STEP 3
The Profile Selection Screen will be displayed.

STEP 4
Navigate to Edit Profile.

STEP 5
Choose a profile to edit.

STEP 6
Navigate to Delete Profile.

STEP 7
Click Confirm to delete your profile.

STEP 8
The deleted profile will be removed from the Profile Selection Screen.

No, the quality of your video depends on the speed and reliability of your internet.

1. Open/Download the My Astro app or visit My Astro web.

2. Login with your Astro ID.

3. Go to Manage Subscription.

4. Tap on Fibre plan.

5. Select your preferred speed and tap 'Proceed'.

6. Review order, select agreed and tap on 'Confirm order'.

7. Select 'Approve' to upgrade speed.

8. A confirmation order will be displayed.

Yes, you may return Astro equipment even after being charged for the box fee.
Please contact Astro to schedule for equipment collection. A courier partner agent or installer will call for the collection.

After successfully returning the box, Astro will proceed to waive off the box fee within 30 days from the confirmation date of the returned items to our Astro warehouse.

Customers are only allowed to choose ONE billing option (either Paper Bill or E-bill or SMS bill). However, customers who opted for Paper Bill will still be able to check their bills through My Astro app and My Astro web.

1. Open/Download the My Astro app or visit My Astro web.

2. Login with your Astro ID.

3. Go to Account.

4. Select 'Profile'.

5. Under Addresses, tap on the edit icon.

6. Select 'Approve' to update service address.

7. Select the Residential type and key-in the postcode, Tap 'Check'.

8. Key-in the Street, House number and Area.

9. Select 'No, I'm all set' and tap 'Proceed'.

10. Tap ' Confirm'.

11. A successful notification will be displayed.

For Platinum Pack and Multiroom Smart TV customers, Astro GO+ will be automatically added to your subscription.