STEP 1
On your remote, press the Home button and the Home Page will be displayed on your screen.



STEP 2
Navigate to Profile.



STEP 3
The Profile Selection Screen will be displayed.



STEP 4
Navigate to Edit Profile.



STEP 5
Choose a profile to edit.



STEP 6
Navigate to Delete Profile.



STEP 7
Click Confirm to delete your profile.



STEP 8
The deleted profile will be removed from the Profile Selection Screen.

STEP 1

Switch OFF the power of your Ultra / Ulti box and make sure that the adapter's power light is off.
 

STEP 2

Switch ON the power of your Ultra / Ulti  box and make sure that the adapter's power light is on.
 

STEP 3

On your remote control, press the Home or Standby button repeatedly until the Startup Options appear on TV.



STEP 4
Press "987" to proceed.
Advanced Startup Options will be displayed.



STEP 5
Press "1" to initiate a reset setting.



STEP 6
Press "OK" to continue.



STEP 7
After the factory setting is restored, TV will turn blank.
Please wait until the box completes initiate setup.



STEP 8
Once completed, the following screen will appear on your TV.
Refer to Installation Setup guide to complete the setup.

Click here to follow New Installation Settings guide for Satellite
Click here to follow New Installation Settings guide for Plug and Play

Rescheduling must be done at least 1 hour prior to the original appointment time.

Astro Channel 200 is a self-service portal that helps you upgrade your packages and purchase add-ons instantly.

To cancel your Multiroom (Smart TV) subscription, please call us at 03-9543 3838.

Should you choose to discontinue/terminate the Astro Fibre Bundle service before the expiry of the contract (24 months), you will be subjected to an early cancelation fee of RM100 x Remaining months of the contract period for your Broadband services and early cancellation fee of New Packs accordingly RM600 (prorated) for Ulti Box or RM1000 (prorated) for Ultra Box.

Any bundle package promotion will be removed, and you will no longer get to enjoy similar promotions upon reconnection.

All Astro Fibre devices provisioned (Fibre modem, WiFi router and Mesh) will need to be returned upon termination. Our team will schedule the collection of equipment after your Broadband services have been terminated.

If equipment is damaged, lost or cannot be retrieved, penalty fees will be applied (excluding Service Tax) accordingly.

• RM500 for Fibre modem (Broadband Termination Unit)

• RM200 for WiFi router (Residential Gateway)

• RM200/unit for Mesh WiFi

You may register up to four (4) devices.

To remove devices on Astro GO, click on Settings > Registered Devices to view and remove a device(s) from the list of devices registered to your Astro ID.

No, the Mesh WiFi add-on with Astro Fibre is available as subscription service and will not be tied to any device contract.

By default, the band steering featured is disabled. Follow these steps to enable it.

Note: Band Steering is called Dual-band Combination in the router web interface.

1. Please connect your computer or laptop to your Astro Fibre router using LAN cable. Your LAN cable must be connected from the yellow port of Astro Fibre router (Any available port).
2. Once connected, open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox and etc.
3. On the address bar, type http://192.168.100.254 and below page will appear.

Login using your username and password if you have changed the router login setting. Otherwise, your default router login is as per below.

Username: user
Password: user

 

4. Once you have successfully logged in, the router's web-based setup page will appear.

5. At the top of the page, click Wi-Fi to configure the WiFi parameters.

6. Click on Dual-band Combination button to enable the Band Steering.

7. A pop-up message will appear showing "The device network may be disconnected when dual-band combination is enabled". Click "OK" to proceed.

8. Set the Wi-Fi name and Wi-Fi password based on customer's preferences. Then click "Apply" for the changes to take place.

Please reconnect to the new Wi-Fi name with the new password once completed.

Astro introduces the new Ulti Box with a redesigned new interface, Cloud recording feature, enhanced search capabilities and more. Just connect the all new Ulti Box to the Internet and take control of your entertainment and stream up to 110,000 videos on demand, anytime. 

‍

The features of the new Ulti Box include:

·      New Home Screen - Everything you see is yours

·      Discover Video on Demand (VOD) - Discover 110,000 videos, stream anytime, anywhere

·      Search - Search for your favorite show or video faster and easier

·      Play from Start - Missed the start of the show? Just restart.

·      Stop Here, Continue There -Stop on one screen and continue on another device

·      Multi-Screen - Stream seamlessly across any device

·      Cloud Recording - Record all the programmers you want at the same time

.      **Continuous viewing - Enable to continue watching your favorite shows during raining.

‍

We recommend an Internet speed of 10Mbps and above for optimal access to cloud recording, streaming on demand videos and search functions. 

Note: ** Except 4K UHD, Astro First and all radio channels

Currently Astro GO is only available in Malaysia. You will not be able to access it if you are overseas.

Yes, from now till 31 May 2022, new customers who sign up for the Platinum Pack on a 24-month contract get to enjoy 60 days on Astro including complimentary access to Sports Extra for 24 months.

For further details on Platinum Pack, please click bit.ly/PlatinumPack60DaysOnUs. Alternatively, new customers on the Movies Pack can enjoy 30 days access to the pack on us.

For more details, please click bit.ly/MoviesPack30DaysOnUs.

STEP 1  

Press "HOME" button on your remote control.

STEP 2

Navigate to Update Satellite Frequency and press “OK”.

‍

STEP 3    

Choose Reprogramming and press “OK”.

STEP 4    

Select Yes, continue and press "OK" to proceed with the update.      

Otherwise, select No, go back to cancel.

STEP 5  

Satellite Frequency Update progress screen will be displayed.

‍

STEP 6    

The test result will be displayed once completed.    

Press "OK" to go back to  channel.

Of course! Please ensure your account is active when requesting for a move.

Zee5 is the only app that has a change in price upon the SST increase. Prices of Netflix, Disney+ Hotstar, Viu, iQIYI, WeTV and Qalbox will not be affected.

Currently the Multiroom (Smart TV) app is supported on four (4) brands with the software version listed below:

1. Sharp
2. Sony
3. LG
4. Samsung

No, there are no penalty fees for the Mesh WiFi devices should you wish to terminate Astro Fibre within/after 24 months. 

Please follow the steps below:

Step1: Fill in Merge/Split Equipment Form (Part A & Part B)

Step2: A full payment to be made on any outstanding balance for all related accounts (if any).

Step3: Submit all documents via feedback form or walk in to nearest Astro Customer Service Centre (CSC).

Step4: Customer will expect a call from our validation team (Note: Turnaround time for merge/ split of account is 3-5 working days upon receiving all complete documentation).

Note:

1. There might be a loss of transmission during the processing of transfer equipment ownership, split or merge of equipment.

Please refer to these FAQs for more information, or click here to learn more and sign up for the Ultra Box. Alternatively, you may call 03-7481 8000 to get in touch with an Astro representative.

BYOND / PVR / Ultra Box

To dismantle ONLY - FOC
‍
To reinstall ONLY – RM65
‍
To dismantle and reinstall - RM65

‍

Broadband / IPTV

Relocation within 6 months of contract start will be charged a RM500.00 relocation fee, and the contract will be renewed to a new 24-month contract.

Relocation after 6 months of contract start will have their contract renewed to a new 24-month contract.

‍

Note For IPTV Customers: 

1. Upon relocation request, all exiting IPTV customers will be converted to our Astro & Broadband service. Customers can choose to have standard Astro service with satellite dish, or unicast Plug & Play without satellite dish.

2. If customers choose to have satellite dish, an additional RM150.00 will be charged for satellite installation. If customers choose to have unicast Plug & Play service, no satellite dish is required, hence no extra charge will be incurred.

‍

‍

*Please note that additional charges may apply if the reinstallation process requires extra cables/fixings.

No, you are not allowed to change your due date or maintain your old due date. Your current due date is as per Astro Policy. Therefore, to ensure that you continue to enjoy uninterrupted services, we advise you to observe this change in due date from Day 30 to Day 25 and proceed with the necessary payment.

All Astro customers who are actively using their username to log in will be notified via email or SMS two (2) weeks before this change takes place. Please refer to the guide below on how to check for your registered contact details:

You will require HD-PVR service in order to subscribe for a PVR. This service is included in all Starter Pack, Value Pack, Super Pack Lite, Super Pack and Super Pack Plus subscriptions.

No, you are still able to subscribe to iQIYI on your current Astro pack.

If your account is suspended or disconnected, you will retain the existing subscription when you reconnect. However, if you plan to make any changes after the reconnection, you can only select from the new packs.

If you're trying to visit a website and it won't load, but others do, there could be a variety of causes. If the site itself is down, there's not much you can do but wait.

If you can load the site on other computers or devices (make sure you try different means of connecting to the internet), there may be an issue with your computer or network.
you may have to get your hands a little dirty.
 

1. Try loading the site on a different device.
   • Try loading the website on your phone or on another computer. If the website loads on the other device, the problem lies with your computer.
   • If the website doesn't load on another device, the problem is either with the network or the website itself.
2. Restart your computer.
   • ​​Oftentimes, a simple reboot will fix the problem you're having. Reboot your computer and test the website again.
3. Try loading the site in a different browser.
   • There may be some settings configured incorrectly on your browser. Try a different web browser to see if you can load the website.
4. Temporarily disable your antivirus program.
   • Your antivirus software may be interfering with your ability to load certain websites.
   • Try disabling the software and then loading the site again. Make sure you enable it again once you have identified the problem.
5. Reset your modem and router.
   • Traffic to or from a certain website may be getting tripped up by your modem or router. Resetting these devices may allow you to access the website again.
6. Check your computer's date and time settings.
   • If your date or time is set incorrectly, you may not be able to connect to secure (https://) websites.
   • Check your computer or mobile device's clock to make sure that it is  set to the correct time and date.
7. In the event the problem persists, please provide below details for further escalation:
   • List of websites effected.
   • Run the Speed Test  via LAN (cable) and Wi-Fi connection - Please click here for Speed Test guideline.
   • Run the Traceroute Test - Please click here for Traceroute Test guideline.
   • Run the Ping Test -  Please click here for Ping Test guideline.
   • Once you've gathered all the results, kindly send them all through the Feedback Form below.

Quick Info
A Speedtest is a service that provides free analysis of Internet access  parameters, such as connection data rate.
A Ping Test shows how long it takes for packets to reach host.
A Traceroute Test traces the route of packets to destination host from our  server.

1. Please use a LAN ethernet cable and connect your computer/laptop to the back of the Maxis Router.

2. You may open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox, etc.

3. On the address bar, please go to http://192.168.1.254 and the page below will appear.

    The default login of the router as below. If you have done a configuration on your router and changed your password previously, please use the password you have previously set.

    Username: administrator

    Password: Router S/N (Available on the sticker at the back of the router)

4. Once you have successfully login, the router's web-based setup page will appear.

5. At the top of the page, click Wi-Fi Configuration to configure the Wi-Fi parameters.

6. You may change the Wi-Fi Name and the Password to follow your preferences, then click "Save" for the changes to take place.

Please reconnect to the new wireless name with the new password once completed.

We are sorry you are thinking of leaving us.

If you wish to cancel your Astro subscription, kindly do take note of the information below if your account is still within contract period,

• Termination Request must be completed by the account holder.
• You need to settle the outstanding balance and penalty (if any).
• All Termination Request require a 30-day notice period.

Step 1:  Launch the app on your Smart TV.

Step 2: You will be able to see a welcome screen with a QR code and URL.

Step 3: Scan the QR code or go to astro.com.my/tvapp on your mobile and enter your unique code (e.g. FSJV-SMBS) displayed on the TV screen

Step 4: At the login page, you will need to log in with your Astro ID (registered email or mobile number) and password.

(If you do not have an Astro ID, click on "Create now" 

to sign up and link to your Astro account – check the following on the steps) 

Step 5: Once you have successfully logged in on your mobile, the Astro app will launch on your Smart TV screen. You can continue to browse and watch your favourite shows on the Smart TV.

STEP 1    

Press "HOME" button on your remote control.

STEP 2    

Navigate to Settings and press "OK".

STEP 3    

Navigate to STB Diagnostics and press "OK".

STEP 4    

Navigate to IP Diagnostics and press "OK".

STEP 5    

IP Diagnostics information will be displayed.

Astro Fibre WiFi router is a dual-band edge Residential Gateway which supports two frequency bands 2.4GHz and 5GHz.

You may use the same feedback form and choose below options.

Category: I would like to request for refund

Sub Category: Request for Refund

1. Unifi netis brand

The following shows an Interface based on Unifi router

1. Launch Web Browser and enter the default's gateway's IP address (192.168.1.1) in the address bar.

1. Enter Username and Password.
   1. Username = tmadmin
   2. Password = Adm@xxxx (xxxx refers to last four digits of MAC address)

1. Choose WLAN -> wlan0 (2.4GHz) Basic Setting. Note down on SSID.

1. Choose WLAN -> wlan1 (5GHz). Compare SSID with previous SSID.

1. If SSID for wlan0 (2.4GHz) and wlan1 (5GHz) are the same. Change wlan1 (5GHz) SSID by adding number 5(i.e. ifuni_5G) to differentiate from 2.4 GHz. Click Apply Changes.

Note: Connection to Wi-Fi may be temporarily loss while the changes is updated.

Unfortunately, your Disney+ Hotstar access with Astro will be terminated as well. 

Unfortunately, only Astro Fibre customers who subscribe from 24 November 2023 to 31 May 2024 are eligible for this free speed upgrade. However, you may still get the speed boost by calling in to our Customer Contact Centre at 03-9543 3838 and re-contracting with us. Kindly note that your account will restart with a new 24-month contract.
 

Please refer to the table below:

Note:  

1. The table above is an approximation of the cancellation fee. The final fees will be calculated at the end of your subscription/upon downgrade.

1. Downgrade of Pack for Residential customers will be on basis of package ranking, whereas downgrade of pack for Astro & Broadband customer will be on basis of total monthly payment.

1. Package ranking in descending order:

• Platinum Pack (highest rank)
• Premium Pack 1/2/3 (same rank across 3 options)
• Entertainment / Sports / Movies Plus Pack
• Entertainment / Sports / Movies Pack (same rank across 3 options)
• Primary Pack (lowest rank)

Please find some examples (for Residential customers) as below:

Termination

Customer signed up for Entertainment Plus Pack (24-month contract) with Ultra Box. Customer decided to terminate the subscription 8 months into the contract. As the customer still has 16 months remaining, the maximum applicable fee will be RM41.67 x 16months = RM666.67

Pack downgrade

Customer signed up for Movies Pack (24-month contract) with Ultra Box. 18 months in, customer decides to downgrade to Primary Pack (24-month contract). As the customer still has 6 months remaining, the maximum applicable fee will be RM20.83 x 6months = RM125

Dropping off Netflix or Disney+ Hotstar within first 12 months

Customer signed up for Entertainment Plus (24-month contract) with Ultra Box and 12-month commitment on Netflix App. 6 months in, customer decides to upgrade to Premium Pack 1 (24-month contract) which does not include Netflix App. As the customer still has 6 months remaining in the first 12 months of commitment for Netflix App,  the maximum applicable fee will be RM41.67 x 6 months = RM250. Upon upgrading to Premium Pack 1, a new 12-month commitment for Disney+ Hotstar App begins alongside the 24-month contract on the package.

By adding a Netflix account to your Astro bill, your Netflix account is already activated. No additional steps for activation are required.

i.Initiate the app on your new Smart TV device, key in the unique code on the TV to your mobile

ii.You will see the list of devices on your mobile and choose the old device to be removed

iii.Your new Smart TV device will be added

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Settings.

STEP 3

Navigate to Satellite Settings and press “OK”.

STEP 4

Navigate to LNB Setup and press “OK”.

STEP 5

Tuner Settings screen will be displayed accordingly.

STEP 6

Select LNB Type connected to your box.

STEP 7

Navigate to Next and press "OK" to confirm your selection.

STEP 8

Select this as the Entry Point and press "OK"  to confirm your selection.

STEP 9

Navigate to Next and press "OK" to confirm your selection.

STEP 10

Signal reading results for Tuner 1 screen will be displayed accordingly.

Press right to navigate to Tuner 2.

STEP 11

Signal reading results screen for Tuner 2 will be displayed.

Then navigate to Finish and press "OK" to complete the setup.

You may proceed with below troubleshooting and it shouldn't take you any longer than 15 minutes.

1. Please standby computer/laptop to access to the internet and connection must be via LAN (cable) [Connect the LAN (cable) to the blue port at Cisco Router and direct to computer/laptop].

2. You may open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox and etc.

3. On the address bar, please go to http://192.168.1.1 and below page will appear.

4. Type the Username and Password as below. Then click OK. (These are the defaults, if you have done previous configuration on your router the password may be different).
 

Username: admin

Password: admin (or time123)
 

5. The router's web-based setup page should now appear. Please follow below steps for the configuration.

i. On the setup page, click the Wireless tab then click on the Basic Wireless Settings sub-tab.

ii. On the Configuration View section, click the Manual radio button. Choosing the Manual setup will allow you to adjust your wireless channel according to your preference.

iii. Leave the Channel Width set to 20MHz Only.

iv. Click the drop-down arrow for Channel, then select your desired channel.

Choose between 1 until 11 (Suggested 1,6,11).

v. Click Save Settings to apply your changes. Router will auto reboot and connection re-establish after few minutes.

Not to worry, you will only need to verify your Astro ID once. After that, you may log in to your account as usual.

Yes, you will need to pay additional RM25 per remaining contract months per unit on top of the standard Broadband penalty fee should you terminate the contract within 24 months.

1. For WiFi connection:
   • For Internet speeds up to 300Mbps, the user needs to have minimum WiFi 802.11n (5GHz) capabilities
   • For Internet speeds up to 500Mbps, the user needs to have minimum WiFi 802.11ac (5GHz) capabilities
   • For Internet speeds up to 800Mbps, the user needs to have minimum WiFi 802.11ax (5GHz) capabilities
2. ​For Wired connection:
   • The users need to use Cat5e Network cable or better and have their device equipped with 1Gbit Network Interface Card (NIC)
3. A summary of the minimum specifications for devices as tabulated below:

1. Number of WiFi antennas in the client device
2. Distance and WiFi signal strength between client device and RGW/Mesh AP
3. Overall WiFi signal congestion/pollution in area
4. Total number of devices connected to the RGW/Mesh AP

• Distance from the RGW/Mesh AP
• Client's Wi-Fi hardware specifications/capabilities
• Overall Wi-Fi signal quality in the area