If you're trying to visit a website and it won't load, but others do, there could be a variety of causes. If the site itself is down, there's not much you can do but wait.

If you can load the site on other computers or devices (make sure you try different means of connecting to the internet), there may be an issue with your computer or network.

There are some quick fixes that will solve most problems, but you may have to get your hands a little dirty.

1. Try loading the site on a different device.
   • Try loading the website on your phone or on another computer. If the website loads on the other device, the problem lies with your computer.
   • If the website doesn't load on another device, the problem is either with the network
2. Restart your computer.
   • Oftentimes, a simple reboot will fix the problem you're having. Reboot your computer and test the website again.
3. Try loading the site in a different browser.
   • There may be some settings configured incorrectly on your browser. Try a different web browser to see if you can load the website.
4. Temporarily disable your antivirus program.
   • Your antivirus software may be interfering with your ability to load certain websites.
   • Try disabling the software and then loading the site again. Make sure you enable it again once you have identified the problem.
5. Reset your modem and router.
   • Traffic to or from a certain website may be getting tripped up by your modem or router. Resetting these devices may allow you to access the website again.
6. Check your computer's date and time settings.
   • If your date or time is set incorrectly, you may not be able to connect to secure (https://) websites.
   • Check your computer or mobile device's clock to make sure that it is set to the correct time and date.

In the event the problem persists, please provide below details for further escalation:

i. List of websites effected.
ii. Run the Speed Test via LAN (cable) and Wi-Fi connection - Please click here for Speed Test guideline.
iii. Run the Traceroute Test - Please click here for Traceroute Test guideline.
iv. Run the Ping Test - Please click here for Ping Test guideline.

Once you've gathered all the results, kindly send them all through the Feedback Form below.

Quick Info
A Speedtest is a service that provides free analysis of Internet access parameters, such as connection data rate.
A Ping Test shows how long it takes for packets to reach host.
A Traceroute Test traces the route of packets to destination host from our server.

Astro Rewards is your free loyalty programme - a way for us to say thank you for being with us.

We're always adding new and exciting gifts, deals, and experiences for you including free concert tickets, discounts, and money can't buy experiences - all ready and waiting in the My Astro app for you, right at your fingertips. Here's the best part, the longer you're with us, the better your rewards!

To redeem rewards as an Astro customer, you can do it through the My Astro app. Here's how:

1. Download the My Astro app
2. Login using your Astro ID
3. Go to Rewards
4. Browse through the rewards and click redeem. Follow the instructions on the screen on how to redeem the reward

🎁 Want to claim rewards exclusive for Astro customers?

📱 Download the My Astro app to:
- Claim free movie or concert tickets
- Meet your favourite celebrity
- Join giveaway contests

There are few ways to get for your refund.
Click here for details:

Occasionally, an additional verification step may be required, such as entering a mobile number. This helps ensure a smooth and secure activation experience.

Refund fee is subject to your processing bank. However, Astro did not impose refund processing fee.

If you already have a WeTV subscription, you are allowed to subscribe to WeTV VIP with the same mobile number via Astro; however, your existing account will continue to run until you manually cancel it. With two active subscriptions with the same mobile number, your subscriptions will be added on top of your existing account and you will be charged twice on two separate accounts.

You require at least two devices to form a Mesh WiFi network which are Astro Fibre WiFi router and a Mesh WiFi unit.

The Mesh unit will link to the WiFi router to form the Mesh WiFi network. You may connect up to 5 Mesh WiFi units for optimal WiFi coverage in your home.

Slow browsing using LAN cable

Looks like there is something wrong with your service connection.

Please run the Speed Test and attach the picture or screenshot of the speed test in the Feedback Form below, in order for us to provide further assistances.

Click here for Speed Test guideline.


Slow browsing using LAN cable

Looks like there is something wrong with your service connection.

Please run the Speed Test and attach the picture or screenshot of the speed test in the Feedback Form below, in order for us to provide further assistances.

Click here for Speed Test guideline.

Quick Info
A Speedtest is a service that provides free analysis of Internet access parameters, such as connection data rate.

Slow browsing using Wi-Fi

1. Router Positioning

Most people underestimate the importance of picking a good spot for a Wi-Fi router. Even a small shift in positioning could end up being the difference between day and night.

i) High vs. Low

Put the router as high up as possible to extend the broadcasting range of the radio waves. This also helps clear the router of possible interferences.

ii) Concrete & Metals

Make sure your router isn't blocked by any other objects, especially devices that are electronic. Also, avoid placing your router in your basement as this area is usually enclosed by a lot of concrete, which can be almost impossible for Wi-Fi signals to penetrate.

iii) Distance to Router

The further away from your router you get, the weaker the Wi-Fi signal. Therefore, the best option is to place your router as close to your devices as possible, but this is only practical if you have one main area where you tend to use your devices.

Otherwise, you should place your router near the center of your home. After all, Wi-Fi broadcasts in 360 degrees, so it doesn't make sense to put it at one end of the house.

2. Wireless Interference & Noise

You've probably never noticed but there are wireless signals all around you wherever you go and they're passing through you all the time. From where? Electronic devices, Wi-Fi routers, satellites, cell towers, and more.

Although Wi-Fi is supposed to be on a different frequency than most of these devices, the amount of radio noise can still cause interference. Some common causes of interference include:

• Microwaves
• Bluetooth Devices
• Cordless Phone

3. Surrounding Wi-Fi signals

A truth of the modern world is that every household has their own Wi-Fi network, which can cause issues with channel overlap. This can be somewhat problematic in a townhouse, but is especially problematic in housing complexes and apartments where there can be many routers within close proximity.

Which is why it's important that you pick a good channel in your router settings. Modern routers can choose channels for you automatically, but sometimes it's better to investigate and find the best channel yourself.

4. Usage

More likely, however, is that the people on your network such as friends, roommates, or family members are participating in bandwidth-heavy activities like gaming and streaming Ultra box/ Netflix.

Fortunately, if this is the case, you can prioritize your own network traffic by enabling Quality of Service in your router settings.

If the problem persists, please run a Ping Test, Traceroute Test and attach the picture or screenshot of both test results in the Feedback Form below, in order for us to provide further assistances.

Please make sure to attach the required screenshot(s) in ONE file (i.e. Microsoft Word document, PDF, Image file) before submitting the form.

Quick Info
A Speedtest is a service that provides free analysis of Internet access parameters, such as connection data rate.
A Ping Test shows how long it takes for packets to reach host.
A Traceroute Test traces the route of packets to destination host from our server.

You should have received an email or SMS with your activation details, please click on the link provided to be redirected to the Netflix website to activate your account.

Alternatively, you can also activate Netflix on your Ultra/Ulti Box. Please surf to CH 741 on your Ultra/Ulti Box (or click the Netflix button on your Astro remote) and follow the instructions on the screen.

Astro GO+ is a service add-on that:

• Enables the simultaneous viewing of Astro GO for up to 4 users/devices.
• Increases the cloud recording storage from 200 hours up to 1500 hours.

There are 2 methods of setting maturity ratings restriction on Netflix:

Method 1 – Create a Kids Profile in Netflix App on Ultra/Ulti Box

1. On the Netflix home menu, select “Switch Profile”

1. Select Add Profile. 

1. Name the profile.

1. Select Kids. Kids profiles have a logo 'Kids' on the profile icon so they are easy to identify. 

1. Select Continue. The new profile will show on the list of profiles on your account.

Method 2 – Manually set Viewing Restrictions for each profile

1. Go to https://www.netflix.com/profiles/manage

1. Select a Profile.

1. Under Maturity Settings, select Edit.

1. Enter your Netflix password.

1. You may select the desired Maturity Rating settings or add a particular title restrictions for the profile.

1. Select Save.

For more information kindly visit:

• https://help.netflix.com/en/node/114275

• https://help.netflix.com/en/node/114276

Check out our user guide for a quick and easy way to get started!

Download our user guide in English

Download our user guide in Malay

Download our user guide in Chinese

Do you need more information? Watch our Astro Ultra How to videos here.

Astro X3’s no-contract option is part of our upcoming offering to give customers greater flexibility and control over their viewing experience.

It is designed with simplicity and ease in mind—allowing customers to sign up, pause, or cancel at any time. More details on how it works and what’s included will be shared soon.

Stay tuned for updates!

e‑Invoice comes with several key benefits that can enhance your overall billing experience, including:

Greater convenience
Receive your invoice in a secure digital format and access it anytime. No printed bills are sent to your address.

Improved security
Each e‑Invoice comes with a validation link through IRBM’s system, helping ensure authenticity and reducing the risk of lost or tampered documents.

Better support for tax compliance
Digital invoices make it easier to submit the right documentation for tax purposes and ensure your records align with regulatory requirements.

More efficient record keeping
All invoices are stored digitally, making retrieval, tracking and financial reporting simpler.

Environmentally friendlier
Going digital helps reduce paper usage and contributes to sustainable, eco‑friendly practices.

No additional subscription is required. Video On Demand (VOD) is a value-added service for all Astro customers with connected Ultra Box and Ulti Box. All you have to do is connect your box to your home Wi-Fi and you'll be able to access the world of on demand. Binge-watch, rewind, fast-froward and stream all your favourite shows anytime.

• If you have signed up for a PVR (New customers), you will have to maintain your Astro subscription for 24 months, or a pro-rated penalty shall apply.
• If you have signed up for a PVR (Existing customers), you will have to maintain your Astro subscription for 24 months, or a pro-rated penalty shall apply.
• If you took up a PVR decoder at a special offer with the package subscription of Super Pack Lite/Super Pack/Super Pack Plus/monthly subscription > RM169.60 (price includes Govt tax), you will have to maintain your package subscription for a minimum of 6 months, or a flat penalty fee of RM106 (price includes Govt tax) shall apply.

Please perform the following checks and troubleshooting steps:

1. Check if your TV supports the Astro app.
The Astro app is generally available on selected:

• Android TV / Google TV
• Samsung Smart TV (selected models)
• LG Smart TV (selected models)

Kindly check that your Smart TV supports the Astro Smart TV app (kindly refer here).
If your TV uses a different operating system (e.g., older proprietary OS), the Astro app may not be available.


2. Update your TV software.
Go to: Settings → Support → Software Update
Install any available updates, then restart the TV and try again.


3. Search the correct app store.

• Samsung: Apps
• LG: LG Content Store
• Android/Google TV: Google Play Store

Search for "Astro" or "Astro GO" (depending on your region and service availability).

4. If your TV's region is set incorrectly, certain apps may not appear.
Look under: Settings → General → Location/Region
Ensure it matches your actual country.

If you are still having issues, proceed to submit report via WhatsApp or Feedback Form and provide:

• Astro ID use
• Smart TV model
• OS version
• Error reported on device

This will help our support team investigate and assist you further.

We would need you to run few tests in order for us to understand your issue and to assist you in fixing the problem.

You may proceed with the troubleshooting steps below which should not require any longer than 15 minutes.

1. Please run each of the tests according to your your Laptop/PC Software.
2. Compile the pictures / screenshots of your test results in one file (i.e Microsof Word document, PDF file) and attach them in the Support Ticket below in order for us to assist you further:
   • List of websites effected.
   • Run the Speed Test via LAN (cable) and Wi-Fi connection - Please click here for Speed Test guideline.
   • Run the Traceroute Test - Please click here for Traceroute Test guideline.
   • Run the Ping Test - Please click here for Ping Test guideline.
3. Once you've gathered all the results, kindly send them all through the Feedback Form below.

Quick Info
A Speedtest is a service that provides free analysis of Internet access parameters, such as connection data rate.

A Ping Test shows how long it takes for packets to reach host.

A Traceroute Test traces the route of packets to destination host from our server.

Yes, the monthly subscription fee will be prorated into your Astro bill.

For more information about the Astro Fibre App, you may click here for a detailed user guide.

Yes, you can activate your access anytime between April 24, 2025, and June 23, 2025, to get 2 months of access to Prime Video at no additional charge. Please note that the offer is subject to change. All sign-ups are also subject to the Prime Video app usage terms and conditions.

Please ensure that your Ultra or Ulti Box is set as the primary (main) decoder to enjoy 2 months of access to Prime Video at no additional charge.

If your primary box is an older model, don’t worry as you can still enjoy this offer by upgrading to an Ultra/Ulti Box within the offer period. Just contact us to arrange your upgrade.

You may view your current subscription details or the channels and packages you are currently subscribed to via My Astro App or My Astro Web. Just login to your accmyastro.astro.com.my/download/ount and click on Manage Subscription to view.

Intermittent internet connection using LAN cable

Looks like there is something wrong with your service connection.

Please run a Ping Test, Traceroute Test and attach the picture or screenshot of both test results in the Feedback Form below, in order for us to provide further assistances.

Please ensure to attach the required screenshot(s) in ONE file (i.e. Microsoft Word document, PDF, Image file) before submitting the form.

Intermittent internet connection using WiFi

1. Router Positioning
   • Most people underestimate the importance of picking a good spot for a Wi-Fi router. Even a small shift in positioning could end up being the difference between day and night.
   • High vs. Low
     • Put the router as high up as possible to extend the broadcasting range of the radio waves. This also helps clear the router of possible interferences.
   • Concrete & Metals
     • Make sure your router isn't blocked by any other objects, especially devices that are electronic. Also, avoid placing your router in your basement as this area is usually enclosed by a lot of concrete, which can be almost impossible for WiFi signals to penetrate.
   • Distance to Router
     • The further away from your router you get, the weaker the Wi-Fi signal. Therefore, the best option is to place your router as close to your devices as possible, but this is only practical if you have one main area where you tend to use your devices.
     • Otherwise, you should place your router near the center of your home. After all, WiFi broadcasts in 360 degrees, so it doesn't make sense to put it at one end of the house.
2. Wireless Interference & Noise
   • You've probably never noticed but there are wireless signals all around you wherever you go and they're passing through you all the time. From where? Electronic devices, WiFi routers, satellites, cell towers, and more.
   • Although WiFi is supposed to be on a different frequency than most of these devices, the amount of radio noise can still cause interference. Some common causes of interference include:
     1. Microwaves
     2. Bluetooth Devices
     3. Cordless Phone
3. Surrounding Wi-Fi signals
   • A truth of the modern world is that every household has their own WiFi network, which can cause issues with channel overlap. This can be somewhat problematic in a townhouse, but is especially problematic in housing complexes and apartments where there can be many routers within close proximity.
   • Which is why it's important that you pick a good channel in your router settings. Modern routers can choose channels for you automatically, but sometimes it's better to investigate and find the best channel yourself.
4. Usage
   • More likely, however, is that the people on your network such as friends, roommates, or family members are participating in bandwidth-heavy activities like gaming and streaming Ultrabox/ Netflix.
   • Fortunately, if this is the case, you can prioritize your own network traffic by enabling Quality of Service in your router settings.

If the problem persists, please run a Ping Test, Traceroute Test and attach the picture or screenshot of both test results in the Feedback Form below, in order for us to provide further assistances.

Please make sure to attach the required screenshot(s) in ONE file (i.e. Microsoft Word document, PDF, Image file) before submitting the form.

Quick Info
A Ping Test shows how long it takes for packets to reach host.
A Traceroute Test traces the route of packets to destination host from our server.

Intermittent internet connection using LAN cable

Looks like there is something wrong with your service connection.

Please run a Ping Test, Traceroute Test and attach the picture or screenshot of both test results in the Feedback Form below, in order for us to provide further assistances.

Please ensure to attach the required screenshot(s) in ONE file (i.e. Microsoft Word document, PDF, Image file) before submitting the form.

Intermittent internet connection using Wi-Fi

1. Router Positioning
   Most people underestimate the importance of picking a good spot for a Wi-Fi router. Even a small shift in positioning could end up being the difference between day and night.
   
   i) High vs. Low
   Put the router as high up as possible to extend the broadcasting range of the radio waves. This also helps clear the router of possible interferences.
   
   ii) Concrete & Metals
   Make sure your router isn't blocked by any other objects, especially devices that are electronic. Also, avoid placing your router in your basement as this area is usually enclosed by a lot of concrete, which can be almost impossible for Wi-Fi signals to penetrate.
   
   iii) Distance to Router
   The further away from your router you get, the weaker the Wi-Fi signal. Therefore, the best option is to place your router as close to your devices as possible, but this is only practical if you have one main area where you tend to use your devices.
   
   Otherwise, you should place your router near the center of your home. After all, Wi-Fi broadcasts in 360 degrees, so it doesn't make sense to put it at one end of the house.
   
   
2. Wireless Interference & Noise
   You've probably never noticed but there are wireless signals all around you wherever you go and they're passing through you all the time. From where? Electronic devices, Wi-Fi routers, satellites, cell towers, and more.
   
   Although Wi-Fi is supposed to be on a different frequency than most of these devices, the amount of radio noise can still cause interference. Some common causes of interference include:
   i) Microwaves
   ii) Bluetooth Devices
   iii) Cordless Phone
   
3. Surrounding Wi-Fi signals
   A truth of the modern world is that every household has their own Wi-Fi network, which can cause issues with channel overlap. This can be somewhat problematic in a townhouse, but is especially problematic in housing complexes and apartments where there can be many routers within close proximity. Which is why it's important that you pick a good channel in your router settings. Modern routers can choose channels for you automatically, but sometimes it's better to investigate and find the best channel yourself.
4. Usage
   More likely, however, is that the people on your network such as friends, roommates, or family members are participating in bandwidth-heavy activities like gaming and streaming Ultrabox/Netflix.
   Fortunately, if this is the case, you can prioritize your own network traffic by enabling Quality of Service in your router settings.

If the problem persists, please run a Ping Test, Traceroute Test and attach the picture or screenshot of both test results in the Feedback Form below, in order for us to provide further assistances.

Please make sure to attach the required screenshot(s) in ONE file (i.e. Microsoft Word document, PDF, Image file) before submitting the form.

Quick Info
A Ping Test shows how long it takes for packets to reach host.
A Traceroute Test traces the route of packets to destination host from our server.

Some of our payment partners require payees to scan the barcode on the statement to make payment. Always bring your Astro bill statement when making payment over the counter.

Most Astro customers are eligible to use the app, web, Ultra and Ulti boxes. You will only need to login with your Astro ID. Do note that your Astro ID must be linked to your Astro account to use the service. Click "Create now!' on the login page and you will be guided to create an Astro ID if you do not have one.

Download My Astro app or visit the My Astro website.

Yes, your information will still be available in the HBO Max app if you choose to resubscribe directly to HBO Max through

www.hbomax.com

. To keep your preferences and account settings, ensure you use the same email address when you resubscribe.

To access the app, please ensure the following:
You are an existing Astro Fibre customer, and you have a valid Astro ID and password to log in.

If you still cannot access the app:
Make sure you have the latest app version from the App Store/Google Play Store. If it is not the latest versioan, please update the app and try again.

You can add a reminder to pay your bill, on your Google Calendar with one click. Enjoy uninterrupted services, by remembering to pay your bill on time.

No. An Astro-billed Disney+ subscription cannot be transferred to a Disney+-billed subscription.

If you choose to subscribe directly with Disney+, your subscription and billing will be managed by Disney+. We recommend reviewing your current Disney+ subscription arrangement before signing up to ensure it best meets your needs.

Please note that subscribing directly through Disney+ while maintaining an active Astro-billed Disney+ subscription may result in you having multiple Disney+ subscriptions and being charged separately for each subscription.

Astro does not provide installment plan facilities. You are advised to pay your charges before the due date, as per your monthly bill statement.

Photograph or scan your payment receipt, and send it to one of our contact platforms found here.

Your bill will be waived upon request.

This error indicates that you have reached the maximum number of simultaneous video streams across devices for one (1) account. To stop seeing this error, please stop streaming on one of your other devices.

• If you have recently purchased your Astro pack or made any changes to your pack on or after 9th November you can stream on two (2) concurrent screens

• If you have not made any changes you can stream on four (4) concurrent screens.

If you are still having issues, proceed to submit report via WhatsApp or Feedback Form.

You can use your existing Prime Video account to access Prime Video on the Ultra/Ulti Box however, if you would like to enjoy the Prime Video for 2 months without additional cost, you may register with a new mobile number/email address. Alternatively, you can activate the 2-month access period using the same mobile number or email address associated with your Prime Video account after your current subscription ends, anytime between 24 April 2025 and 23 June 2025.

The Malaysia Communication and Multimedia Commission (MCMC)has issued a directive to all telecommunication companies (telcos) to block the sending and receiving of SMS with URL links. The move is aimed at preventing users from becoming victims of online scams. This exercise is applicable for all person-to-person SMS with URL links sent to or received from local and international mobile numbers, which has already taken effect as of 2 May 2023.

If you’re facing issues updating your mobile number via My Astro, here’s how you can update your mobile number through your Set Top Box (STB).

• Follow Method A if your box uses a satellite dish (Applicable to all boxes).
• Follow Method B if you are on Ultra or Ulti box that is connected to the internet.
• If your box has both, either method will work.

Method A:

1. Switch on your box and navigate to Channel 105 OR Channel 201 OR Channel 308 OR Channel 802.
2. Press on the red button on your Astro remote control and a QR code will be displayed on your screen.
   
3. Scan the QR code on a mobile device.
4. On the newly opened webpage, please enter your new mobile number.
   
5. To verify your identity, please enter the last 6 digits of the Astro account holder’s MyKad/Passport.
   
6. Please enter the OTP sent to the new mobile number.
   
7. Once the OTP is verified, your mobile number will be updated.
   

Method B:

1. Switch on your box and launch My Astro through the top menu or from the ‘Apps’ section.
2. Once you are in My Astro, press the yellow button on your Astro remote control to visit your ‘Account details’.
   
3. Press the down button to view ‘Personal info’.
   
4. Press the left button and focus on the edit icon for mobile number, press on "OK" to change your contact details.
   
5. To verify your identity, please enter the last 6 digits of the Astro account holder’s MyKad/Passport.
   
6. Please enter your new mobile number.
   
7. Please enter the OTP sent to the new mobile number.
   
8. Once the OTP is verified, your mobile number will be updated.
   

If you’re still unable to update your mobile number, kindly reach out to us via our Feedback Form and a representative from our team will get in touch to assist you soon.

You have exceeded the maximum number of registered devices allowed. To manage devices on Astro GO, go to Settings > Registered Devices to view / remove devices from the list of registered devices to your account.

If you are still having issues, proceed to submit report via WhatsApp or Feedback Form.

No, customers without an Ultra/Ulti Box will not be able to enjoy Sun NXT via their Astro Box. However, they can enjoy Sun NXT on their mobile devices. To enjoy Sun NXT on their big screen, customers can upgrade to an Ulti/Ultra box. Customers can check their eligibility for the free box swap by logging into the My Astro app or by contacting Astro’s customer service at 03 9543 3838.

Watch this video or follow below steps to refresh signal of your Astro box

OR

Please ensure to put your box on standby mode to refresh the signal.

The fastest way is via My Astro:

1. Open/Download the My Astro app or visit My Astro web
2. Login with your Astro ID
3. Go to Account
4. Tap on Subscription or TV pack
5. Tap on Rooms
6. For the box that you would like to refresh the smartcard, tap on 'Refresh box' button. This will refresh your Astro box signal

OR

WhatsApp
1. Message 'Hi' to us at 03-9543 3838
2. Click on Tap Here for Options
3. Select Help & Support
4. Type Refresh Astro Box Signal

-
📡 Experiencing technical issues?

📱 Download the My Astro app to:
- Perform self-troubleshoot
- Solve in a few minutes
- No need to call customer service

All streaming apps will be made available on the Ultra Box first, followed by the Ulti Box. If you would like to upgrade to the Ultra Box, please visit product.astro.com.my/tv or reach us via WhatsApp by typing “Hi” at 03-9543 3838 for assistance.

Starting

12 December 2023

, users must log in using their

registered email address

,

mobile number

, or a

social account

(Facebook, Google, or Apple) to access any of Astro's digital platforms, including

My Astro

,

Astro GO

, and

Astro's official website

.

If you are unable to log in to the Astro Smart TV app, please follow the steps below:

1. Verify Your Astro ID Credentials

• Ensure you are using the correct Astro ID (email address/mobile number) and password.
• If you have forgotten your password, reset it via the Astro login page.

2. Check Your Internet Connection

• Ensure your Smart TV is connected to the internet.
• Test your internet connection by opening another app on the TV.
• Restart your router and Smart TV if necessary.

3. Update the Astro App and TV Software

• Make sure the Astro app is updated to the latest version.
• Check that your Smart TV firmware/software is up to date.

4. Restart the App

• Close the Astro app completely.
• Reopen the app and try signing in again.

5. Reinstall the Astro App

• Uninstall the Astro app from your Smart TV.
• Download and install it again from your TV's app store.
• Attempt to log in once more.

If you are still unable to log in, proceed to submit report via WhatsApp or Feedback Form and provide:

• Smart TV brand and model
• Screenshot/photo of the error message
• Astro ID (email address used for login)
• Details of the troubleshooting steps already performed

This information will help the support team investigate and resolve the issue more quickly.