Yes, the monthly subscription fee will be prorated into your Astro bill.

To check on your termination status or date, you may:

1) Message us on WhatsApp at 03-9543 3838. Type Termination Status
2) Submit Feedback Form
3) Reach out via Astro Official Digital platform i.e. Facebook or Chat.

Our agent will provide the information you need.

To access the app, please ensure the following:
You are an existing Astro Fibre customer, and you have a valid Astro ID and password to log in.

If you still cannot access the app:
Make sure you have the latest app version from the App Store/Google Play Store. If it is not the latest versioan, please update the app and try again.

Users can easily access all their streaming Apps such as Netflix, Disney+, Viu etc by clicking the “APPS” button on their remote control. After clicking this button, they will be brought to the Apps rail under the home page.

STEP 1
Switch off the power for your box and make sure that the adapter's power light is off.

STEP 2
Locate the Smartcard at the front or right side and gently pull it out make sure that the adapter's power light is off.

STEP 3
Wipe the Smartcard's gold chip clean using a dry soft cloth.

STEP 4
Make sure the gold chip is facing upwards and reinsert it all the way in.

STEP 5
Switch on the power for your box and make sure that the adapter's power light is on. Please wait for 5 minutes.

STEP 6
Turn on your box. You should no longer be experiencing this problem.
If issue persist, please submit the issue in our Feedback Form and attach a picture of your General tab of the STB Diagnostics for assistance.

There will be no changes to your account. However, by paying 5 days earlier, your transactions will be processed in a timely manner and to allow you to enjoy uninterrupted viewing before the next bill is generated for the following month.

STEP 1

Check your current software version on your box.

If the software version updated (Refer to Table 1), proceed to STEP 2.

Table 1

If software version different from Table 1, click here for Software Update guide.

Once software is updated, tune to the impacted channel.

If issue persist, proceed to STEP 2.

STEP 2

Run Test Satellite Frequency.

Click here for the guide.

If Test Pass, proceed to submit report here.

Guide to submit report:

At Feedback Type select "I have missing channel".

Fill up all the required information and submit.

Please indicate if you agreed to recontract for 12 months (technical visit is FOC) or paid visitation (RM65).

You will receive appointment details via SMS within 48 hours.

If Test Fail, proceed to STEP 3.

STEP 3

Proceed to Update Satellite Frequency.

Click here for the guide.

Once completed, tune to the impacted channel.

If issue persist, proceed to submit report here.

Guide to submit report:

At Feedback Type select "I have missing channel".

Fill up all the required information and submit.

Please indicate if you agreed to recontract for 12 months (technical visit is FOC) or paid visitation (RM65).

You will receive appointment details via SMS within 48 hours.

Starting

12 December 2023

, users must log in using their

registered email address

,

mobile number

, or a

social account

(Facebook, Google, or Apple) to access any of Astro's digital platforms, including

My Astro

,

Astro GO

, and

Astro's official website

.

For Ultra/Ulti Plug & Play Box installation, it is recommended that you attempt to self-install by following the installation guide here, but there is an option to request for an installer to install the box at your premise. However, there will be a separate fee for this service request.

No. You will need an active Astro subscription before you can subscribe to Disney+ through Astro or enjoy Disney+ as part of an Astro package.

To learn more about Astro packages and our latest offers, click here.

Please check your internet speed and connection status. If your internet is working without any issues, please logout & login into the app again.

If you are still having issues, proceed to submit report via WhatsApp or Feedback Form.

STEP 1

Press "HOME" button on your remote control.

STEP 2

Navigate to Settings and press "OK".

STEP 3

Navigate to STB Diagnostics and press "OK".

STEP 4

From General Tab, look at the Smart Card No for the smartcard number.

STEP 5

Take look at the Set Top Box Serial Number for the box serial number.

Alternatively, you can check your smartcard number on the My Astro app. Here's how:

1. Download the My Astro app
2. Login using your Astro ID
3. Go to Subscription > Rooms
4. You can see your smartcard number for each box you have

Yes, please open any marketing emails you have received from iQIYI and click on the unsubscribe link embedded in the email.

Yes, customers may need to provide additional documents such as bank-in slips or payment receipts. For refund requests due to wrong payment, it is mandatory to provide proof of payment or a bank statement that shows the transaction and bank account details

STEP 1

On your remote, press the HOME button.

STEP 2

Navigate to Update Satellite Frequency and press “OK”.

STEP 3

Choose Test Satellite Frequency and press “OK”.

STEP 4

Select Yes, continue and press "OK" to start the test.

Otherwise, select No, go back to cancel.

STEP 5

Satellite Frequency Test progress screen will be displayed.

STEP 6

The test result will be displayed once completed.

Press "OK" to go back to channel.

SST of 6% and 8% will be applied accordingly to your bundle services:

1. 8% SST to Astro TV Pack
2. 6% SST to Astro Fibre

You will be able to enjoy all the content on ZEE5 immediately upon successful purchase from the Astro website. You may enjoy your Premium privileges from the ZEE5 app on your Ultra Box, Ulti Box, mobile devices (Android & iOS), Apple TV, Android TV, as well as on Web (www.Zee5.com).Please ensure that the email address used to log in to the app is the same one used to purchase your ZEE5 premium subscription.

Customer can return the Ultra Box / Ulti Box by dropping to the nearest Astro Authorize Courier Partner and the adjustment will be made into the next bill once the box received.

"Payment Due Date" refers to the payment deadline for your Astro bills each month.

No, please return your old Astro Fibre modem and its power supply unit (PSU). There will be no penalty fees if the cable is damaged or lost.

Step 1: User press ‘YELLOW’ button to change mobile number.

Step 2: Scan the QR Code on your Ultra Box/Ulti Box using your mobile phone.

Step 3: Update your mobile number.

Step 4: Click on ‘Mobile number updated’ upon mobile number update completion and continue with OTP validation again.

Step 5: Once the mobile number has been successfully updated, please continue with the activation process.

Please ensure that you have entered the correct email address or mobile number associated with your Disney+ account.

If you still do not receive the OTP, please WhatsApp or call Astro’s Customer Service at +603 9543 3838.

You would need your 10-digit account number and your email address.

Unfortunately, the the drop off option is only available for non-DBB customer. For DBB customer we will arrange for our appointed agent to collect your equipment. You will receive a phone call from our representative within 3 business days from your termination date to schedule the collection.

Yes, however, we do advise keeping your subscription while your Smart TV is being fixed to avoid having to download the app again.

Yes. You are entitled to separate Netflix accounts for each main Astro subscription e.g. If you have subscribed to Entertainment Plus, Platinum Pack, etc separately. Therefore, if you have more than one main Astro subscription with Netflix, you may choose to create multiple email addresses to activate each respective Netflix subscription. Please follow the steps provided to you via email/SMS in order to activate your Netflix subscriptions on the website.

Follow the steps below to activate and access Prime Video.

a. Via Astro’s Ultra/Ulti Box
Step 1: Launch Prime Video from the application rail (on the Home page)

Step 2: Scan the QR Code displayed on your TV screen using your mobile device to be redirected to the Prime Video app

Step 3: Once you are redirected to the Prime Video app on your mobile, create an Amazon Prime account using your mobile number or email address. Then click on ‘Verify mobile number’

Step 4: Now that you have activated your Prime Video account, your TV screen would be refreshed as below

Step 5: Click on Proceed and then on the “Sign in” button

Step 6: Pair your Ultra/Ulti Box to your Prime Video account by scanning the QR Code using your mobile device

Step 7: Enter the registration code displayed on your TV screen on either a mobile browser or open the Prime Video app on your mobile device, and then click "Allow".

b. Via Astro’s Website https://product.astro.com.my/apps/primevideo

Step 1: Visit https://product.astro.com.my/apps/primevideo and click on "Activate Prime Video Now" then log in using your Astro ID and follow the steps on screen.

Step 2: Scan the QR Code displayed on your TV screen using your mobile device to be redirected to the Prime Video app

Step 3: Once you are redirected to the Prime Video app on your mobile, create an Amazon Prime account using your mobile number or email address. Then click on ‘Verify mobile number’

Step 4: Now that you have activated your Prime Video account, your TV screen would be refreshed as below

Step 5: Click on Proceed and then on the “Sign in” button

Step 6: Pair your Ultra/Ulti Box to your Prime Video account by scanning the QR Code using your mobile device

Step 7: Enter the registration code displayed on your TV screen on either a mobile browser or open the Prime Video app on your mobile device, and then click "Allow".

c. Via My Astro app

Step 1: Download the My Astro app from the Apple App Store, Google Play Store, or Huawei AppGallery.

Step 2: Go to Account > Subscription > Add-ons > Manage your add-ons > select ‘Prime Video’ > Proceed then click on ‘Confirm order’

Step 3: Once done, go back to Account > Subscription > Add-ons. Here, you will be able to see ‘Prime Video’ under the list of ‘Apps’. Click on it and follow the steps displayed on screen to activate your Prime Video account

Step 4: Once you are redirected to the Prime Video app on your mobile, create an Amazon Prime account using your mobile number or email address. Then click on ‘Verify mobile number’

Step 5: Scan the QR Code displayed on your TV screen using your mobile device to be redirected to the Prime Video app

Step 6: Click on Proceed and then on the “Sign in” button

Step 7: Pair your Ultra/Ulti Box to your Prime Video account by scanning the QR Code using your mobile device

Step 8: Enter the registration code displayed on your TV screen on either a mobile browser or open the Prime Video app on your mobile device, and then click "Allow".

Step 9: Prime Video is now part of your subscription. Enjoy!

If you see either of these error messages below as in the image, it means your account has been temporarily locked after 3-time trial for security reasons. To resolve this issue and reset your account, please call Prime Video support team directly at

+1-206-577-1364

or

1-206-577-1364.

They’ll help you verify your identity and restore access.

Yes, starting 9 December 2024, the new packs will be the default offering from Astro.

No, the Netflix 24-month ala-carte plans do not include an auto-renewal contract. After your contract has expired, you can continue to enjoy the discounted price as long as you maintain your Netflix subscription with Astro.

No there will not be any penalty.

For the Multiroom subscription on a box setup, if your subscription is within the 24-month contractual period. Then a pro-rated penalty of RM600 will be applied for any Astro box except for Ultra Box, which the penalty will be RM1,000.

As a rule of thumb, this issue might happen when the devices are not equipped with minimum requirement above that supports the subscribed internet speeds:

• WiFi technology
• Network Interface Card (NIC)

As mentioned above however, it is important to note that despite meeting the device minimum requirements, it is not a guarantee that devices connected over WiFi will be able to achieve maximum subscribed internet speeds due to the following:

1. Bad WiFi signal quality and coverage across the area due to:
   • Distance from the RGW/Mesh AP with connected device
   • Obstruction within the house (walls, metallic surfaces)
   • Interference with other household appliances
2. Congested bandwidth
   • If there are too many devices connected to the WiFi network, then the bandwidth might be overloaded with traffic hence, slowing down the speed
3. Devices are connected using WiFi instead of wired using LAN.
   • It is important to note that wired connection offers better reliability and speed over WiFi.
   • WiFi is more prone to interference compared to a wired connection which causes lower speeds and dropped signal.
4. Router Positioning: Most people underestimate the importance of picking a good spot for a Wi-Fi router. Even a small shift in positioning could end up being the difference between day and night:
   • High vs. Low: Put the router as high up as possible to extend the broadcasting range of the radio waves. This also helps clear the router of possible interferences.
   • Concrete & Metals: Make sure your router isn’t blocked by any other objects, especially devices that are electronic. Also, avoid placing your router in your basement as this area is usually enclosed by a lot of concrete, which can be almost impossible for Wi-Fi signals to penetrate.
   • Distance to Router: The further away from your router you get, the weaker the Wi-Fi signal. Therefore, the best option is to place your router as close to your devices as possible, but this is only practical if you have one main area where you tend to use your devices. Otherwise, you should place your router near the center of your home. After all, Wi-Fi broadcasts in 360 degrees, so it doesn’t make sense to put it at one end of the house.
5. Usage
   • More likely, however, is that the people on your network such as friends, roommates, or family members are participating in bandwidth-heavy activities like gaming and streaming Ultrabox/Netflix.
   • Fortunately, if this is the case, you can prioritize your own network traffic by enabling Quality of Service in your router settings.
   • If the problem persists, please run a Ping Test/Traceroute Test and attach the picture or screenshot of both test results in the Feedback Form below, in order for us to provide further assistances. Please make sure to attach the required screenshot(s) in ONE file (i.e. Microsoft Word document, PDF, Image file) before submitting the form.

Note:
Astro and its service providers will not offer any guarantees for compatibility of the customer's equipment (e.g., Personal Computer, Notebook, printers) nor provide on site troubleshooting for WiFi service issues related to the customer's equipment.

Intermittent internet connection using LAN cable

Looks like there is something wrong with your service connection.

Please run a Ping Test, Traceroute Test and attach the picture or screenshot of both test results in the Feedback Form below, in order for us to provide further assistances.

Please ensure to attach the required screenshot(s) in ONE file (i.e. Microsoft Word document, PDF, Image file) before submitting the form.

Intermittent internet connection using Wi-Fi

1. Router Positioning
   Most people underestimate the importance of picking a good spot for a Wi-Fi router. Even a small shift in positioning could end up being the difference between day and night.
   
   i) High vs. Low
   Put the router as high up as possible to extend the broadcasting range of the radio waves. This also helps clear the router of possible interferences.
   
   ii) Concrete & Metals
   Make sure your router isn't blocked by any other objects, especially devices that are electronic. Also, avoid placing your router in your basement as this area is usually enclosed by a lot of concrete, which can be almost impossible for Wi-Fi signals to penetrate.
   
   iii) Distance to Router
   The further away from your router you get, the weaker the Wi-Fi signal. Therefore, the best option is to place your router as close to your devices as possible, but this is only practical if you have one main area where you tend to use your devices.
   
   Otherwise, you should place your router near the center of your home. After all, Wi-Fi broadcasts in 360 degrees, so it doesn't make sense to put it at one end of the house.
   
   
2. Wireless Interference & Noise
   You've probably never noticed but there are wireless signals all around you wherever you go and they're passing through you all the time. From where? Electronic devices, Wi-Fi routers, satellites, cell towers, and more.
   
   Although Wi-Fi is supposed to be on a different frequency than most of these devices, the amount of radio noise can still cause interference. Some common causes of interference include:
   i) Microwaves
   ii) Bluetooth Devices
   iii) Cordless Phone
   
3. Surrounding Wi-Fi signals
   A truth of the modern world is that every household has their own Wi-Fi network, which can cause issues with channel overlap. This can be somewhat problematic in a townhouse, but is especially problematic in housing complexes and apartments where there can be many routers within close proximity. Which is why it's important that you pick a good channel in your router settings. Modern routers can choose channels for you automatically, but sometimes it's better to investigate and find the best channel yourself.
4. Usage
   More likely, however, is that the people on your network such as friends, roommates, or family members are participating in bandwidth-heavy activities like gaming and streaming Ultrabox/Netflix.
   Fortunately, if this is the case, you can prioritize your own network traffic by enabling Quality of Service in your router settings.

If the problem persists, please run a Ping Test, Traceroute Test and attach the picture or screenshot of both test results in the Feedback Form below, in order for us to provide further assistances.

Please make sure to attach the required screenshot(s) in ONE file (i.e. Microsoft Word document, PDF, Image file) before submitting the form.

Quick Info
A Ping Test shows how long it takes for packets to reach host.
A Traceroute Test traces the route of packets to destination host from our server.

If you are subscribed to Netflix via a bundle, Netflix comes by default as part of your entitlement.

If you are subscribed to Netflix as an a-la carte, the cancellation of Netflix can only be done via Netflix's Website, etc). This change will reflect in your next bill. From mid-December 2021 you may also cancel Netflix add-on through Astro Call Center.

STEP 1

Press "HOME" button on your remote control.

STEP 2

Navigate to My TV and press "OK".

STEP 3

Navigate to Bookings and press "OK".

STEP 4

Your list of your booking programs will be displayed.

To be eligible, you'll need to be an Active Astro Pay TV customer with a valid Astro ID.

An Active Astro customer refers to a subscriber of the Astro Service, whose account is current and active with no outstanding payments due and who has not breached the Astro subscription agreement nor given any instructions to terminate and/or suspend his/her subscription to the Astro Service.

Each account you hold is entitled to one (1) tier status based on the longest active smartcard.

All new and existing Astro Pay-TV customers are entitled to Astro special price when they signup for iQIYI as a VIP member via Astro at www.astro.com.my/iqiyi.

STEP 1

Switch OFF the power of your Ultra / Ulti box and make sure that the adapter's power light is off.

STEP 2

Switch ON the power of your Ultra / Ulti box and make sure that the adapter's power light is on.

STEP 3

On your remote control, press the standby button repeatedly until the Startup Options appear on TV.

STEP 4

Press "1".

STEP 5

Press "1" if your box setup under Satellite Mode.
Press "2" if your box setup under Plug and Play Mode.

STEP 6

The Software Update progress screen will appears.

The update will take 10 - 15 minutes to complete.

Please be patience.

The Viu free trial for Astro customers on the Ultra and Ulti Box has ended as of 8 June 2023. To
continue streaming all your favourite shows on Viu, switch to Viu Premium under the Asian
Favourites selection or subscribe for as low as RM8.40/month (RRP: RM21.90). Please refer to
Q5 to Q9 for more information.

Yes, you can. On your Account page and go to Profile. Click edit on Service address to change your address details. You may also request for installation assistance if it's required for the new address.

Download My Astro app or visit the My Astro website.

There will be no changes to your billing cycle.

This initiative is part of Astro’s “GO GREEN” journey, which was implemented to promote paperless billing and to play our part in protecting the environment. The objective of the Paper Bill Charge is to encourage our customers to opt for e-Billing as their preferred Bill Delivery Method, which is also a more convenient and efficient way to access and manage their bills. Hence, a fixed RM10.00 monthly charge will be applied to all existing and new Astro customers who opt for Paper Bills as their preferred bill delivery method.

Service Tax is charged based on the date the service is rendered. For services rendered on or after 1st March 2024, the Service Tax rate would be at 8% whilst for services enjoyed before 1st March 2024, the Service Tax rate would be 6%.

Starting Thursday, November 14, 10 AM, Netflix will increase the prices for Netflix subscriptions across all plans (Basic, Standard, and Premium) in Malaysia. For Astro subscription packs that are bundled with Netflix, the price change will only take effect on 1 March 2025.

If you subscribe to Netflix through Astro, please note the following changes:

1. New Netflix add-on sign-ups: The new prices will take effect immediately.
2. Existing Netflix add-on customers who subscribed before November 14, 2024: The price change will take effect for billing cycles starting on or after November 21, 2024.
3. Astro subscription packs that are bundled with Netflix: The price change will only take effect on March 1, 2025.

Yes, effective 1st March 2025, your Astro subscription packs that are bundled with Netflix will have a price increase:

• Netflix Standard: An increase of RM4.50 (before tax) monthly will be applied.
• Netflix Premium: An increase of RM7.28 (before tax) monthly will be applied.
• Netflix Premium (Astro one Epic): An increase of RM2.78 (before tax) monthly will be applied.

Yes, you can. Click on Menu > Language and choose your preferred language. Then, click “SAVE”

SecureGo authorisations are required for all transactions via My Astro app v6.2.0 (effective 18 June 2024). Transactions via other platforms or older app version will still use the SMS OTP.

Upgrade to Sun NXT Premium via www.astro.com.my/sunnxt or the MyAstro app. For further assistance, contact our customer service at 03-9543 3838.

You can watch Disney+ through any of the following methods:

a. Astro Ultra and Ulti Box by launching the Disney+ app under the Apps rail on your Home page.

b. Personal devices (e.g. mobile phones, tablets and Smart TVs) by downloading the Disney+ app or visiting the Disney+ website.

You will need to log in using the credentials created during activation.

Yes, you can manage all of your Astro Fibre subscriptions with the Astro Fibre App. However, you would need to create a different Astro ID for each Astro Fibre account.