We would need you to run few tests in order for us to understand your issue and to assist you in fixing the problem.

You may proceed with the troubleshooting steps below which should not require any longer than 15 minutes.

1. Please run each of the tests according to your your Laptop/PC Software.
2. Compile the pictures / screenshots of your test results in one file (i.e Microsof Word document, PDF file) and attach them in the Support Ticket below in order for us to assist you further:
   • List of websites effected.
   • Run the Speed Test via LAN (cable) and Wi-Fi connection - Please click here for Speed Test guideline.
   • Run the Traceroute Test - Please click here for Traceroute Test guideline.
   • Run the Ping Test - Please click here for Ping Test guideline.
3. Once you/ve gathered all the results, kindly send them all through the Feedback Form below.

Quick Info
A Speedtest is a service that provides free analysis of Internet access parameters, such as connection data rate.
A Ping Test shows how long it takes for packets to reach host.
A Traceroute Test traces the route of packets to destination host from our server.

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Settings.

STEP 3

Navigate to Standby Mode and press "OK".

STEP 4

Navigate to your preferred selection and press "OK".

STEP 5

Navigate to Save and press "OK" to confirm your selection.

Please contact us through one of our platforms found here or Self-serve by logging in to Astro Self-Service Portal within 3-7 days before moving out and we will sort everything out for you!

You would need your 10-digit account number and your email address.

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to SETTINGS.

STEP 3

Navigate to Audio Delay and press "OK".

STEP 4

Navigate to your preferred selection and press “OK”.

Yes, for customers on the Primary, Movies, Movies Plus, Sports, Sports Plus or Premium 1 Pack,
you will still be able to enjoy Viu Premium as an add-on for as low as RM8.40/month (RRP:
RM14.90). Please refer to the table below for the complete pricing:

Yes, the Favourite channels will follow the latest channel list. Therefore, you will need to reset your Favourite channels.

The WiFi SSID and password of the Mesh unit will be automatically synchronized to the WiFi router. Hence, there is no need to configure the WiFi parameters.

*WiFi SSID (Service Set Identifier) is the name of your wireless network, also known as Network ID. It is viewable to anyone with a wireless device within reachable distance of your network.

No, your existing add-ons will not be retained. When you terminate your current Astro subscription, all associated add-ons will also be cancelled. As the Astro X3 pack is a separate subscription under a new account, you will need to subscribe to your desired add-ons again, subject to availability under the new plan.

Below are the details of the Sun NXT pricing options for Astro customers.

You can make changes to your Netflix plans that are included in your Bundle through My Astro app

You can change your non Astro-bundled a-la carte Netflix plan at any time by signing into Netflix.com and visiting the Account page, then selecting Change Plan to view and select available plans.

If you're getting the following error on your PVR box when trying to access On Demand (VOD) feature:
- Network interruption, please try again later. If problem persists, please WhatsApp HELP to 03- 9543 3838.
(Code: V6A / V63 / V65)
- Unable to load the On Demand Catalogue due to failure in resolving server's DNS address. Please check your internet connection and try again later. (V6B)

This error message appears because you're trying to access a service that has been discontinued.
Please be informed that Video on Demand (VOD) services has been discontinued on Astro PVR boxes starting 31 December 2025, 12:01 AM. This is part of our ongoing efforts to enhance customer's viewing experience as PVR boxes are no longer able to support the advanced features and viewing quality available on our newer boxes due to technology limitations.

To continue enjoying Video on Demand (VOD) content on Astro set-top-boxes, you must upgrade your PVR box to an Ultra or Ulti Box. This upgrade is available at no additional cost for PVR box users, and it gives you access to the latest features and an improved viewing experience. Alternatively, if you don't want to upgrade your PVR box, you can continue to access On Demand content anytime via Astro GO, which is available at no additional cost to all Astro customers.

All other regular PVR features including the recording feature will remain available.

To find out more on this upgrade offer, contact Astro customer service at 03-95433838.

Starting 29th April 2025 onwards, the Sun NXT app will be available on the Ultra/Ulti Box for all Astro customers to enjoy on the big screen, web app or/and mobile app.

STEP 1
Switch off the power of your box and make sure that the adapter’s power light is off.

STEP 2
Unplug the HDMI cable from your TV and plug it back in securely to other available HDMI port.

STEP 3
Switch on the power for your box and make sure that the adapter’s power light is on.
Please wait for 5 minutes.

STEP 4
Turn on your box. Do select the correct TV input.

------

If you're seeing a persistent blank screen after changing the display resolution on your Ultra/Ulti Box (for example, to 2160p), your TV may not support the selected resolution.

STEP 1

Switch off the power for your box and make sure that the adapter's power light is off.

STEP 2

Switch on the power for your box and make sure that the adapter's power light is on.

STEP 3

Press the standby button repeatedly after switch on the power.

The Startup Options screen will appear on your TV.

STEP 4

Press "987" to access the Advanced Startup Options menu.

Then, press "1" to initiate a reset setting.

STEP 5

Press "OK" to confirm restore to factory setting.

STEP 6

After the factory setting is restored, TV will turn blank.

Please wait until the box completes initiate setup.

STEP 7

Press "1" to initiate Linux download on the software.

STEP 8

Once completed, the following screen will appear on your TV.

Refer to Installation Setup guide here to complete the setup.

Astro X3 Packs are available in two contract options:

1. 12-Month Contract Plan – Customers are required to fulfil a one-time 12-month contract commitment. There is no contract renewal required after contract expiry.
2. No-Contract Plan – Customers who prefer greater flexibility may subscribe to a no-contract option, which will be available from December 2026 onwards.

You can proceed with below troubleshooting if the weather is good. Ortherwise, you may try again later.

STEP 1
On your remote, press the “HOME” button and the home menu will be displayed at the bottom of your screen.

STEP 2
Navigate to SETTINGS and press “OK”.

STEP 3
Navigate to STB DIAGNOSTICS and press “OK”.

STEP 4
Refer to the signal strength % shown on the top left of your screen.
If it is 65% or higher, please go to WhatsApp to receive further help.
If it is below 65%, please go to STEP 5.

STEP 5
Switch off the power for your box and make sure that the adapter’s power light is off.

STEP 6
Unscrew the satellite cable from the box and pull it out.

STEP 7
Plug the satellite cable back into the box and screw it back securely.

STEP 8
Switch on the power for your box and make sure that the adapter’s power light is on.
Please wait for 5 minutes.

STEP 9
Turn on your box. You should no longer be experiencing this issue.
If issue persist, please attach a picture of your General tab of the STB Diagnostics for assistance.

Centralized Dish
If issue persist under a centralised satellite dish, please refer to your respective Building Management before contacting our agents.

WeTV offers a wide range of hot and exclusive content in advance for WeTV VIP members, which includes WeTV Originals, series, dramas and many more. With a VIP subscription, you can also enjoy all these exciting content with the ability to skip advertisements to stream without interference and watch your favourite shows on two devices at the same time!

VIP membership privileges:

1. Premium Content on WeTV only

2. Enjoy VIP content on two devices at the same time

3. Watch the content in advance before anyone else!

In your first Astro bill, the first month's bill will be deducted accordingly excluding tax. You will still need to pay the full tax amount for your first month as per your first month's bill.

Note: Advance payment is only applicable to Astro TV pack purchases. If you subscribe to an Astro Fibre + TV bundle, only one month of your TV subscription fee (excluding tax) is required to be paid upon sign-up. The full tax amount and the first-month subscription fee for Astro Fibre will be paid on your first month's bill.

Yes. You can activate your access anytime between 24 April 2025 – 23 June 2025 to get 2 months access to Prime Video at no additional charge.

You can record your favourite shows, save them to the cloud storage and watch it across any of your devices (Astro Box, Astro GO devices, Multiroom Smart TV).

Yes. If you’re on any Bundle which includes the Movies Pack, have the Movies Add‑On, are subscribed to the HBO Pack Add‑On or Astro One Epic Pack, you can stream the new channels on Astro GO from 1 March 2026 and 1 April 2026 accordingly.

Follow the steps below to access the TVBAnywhere+ app on your Ultra/Ulti box:

• Step 1: On the Home menu, go to the app rail and select TVBAnywhere+. A screen with Pair TVBAnywhere+ TV App and a QR code will appear.
• Step 2: Scan the QR code with your mobile device. This action will open the TVBAnywhere+ login page on your phone.
• Step 3: Click on the Astro logo from the partner picker list and login with your Astro ID.
• Step 4: The TVBAnywhere+ app will now launch. Select the ‘Me’ icon to open your profile.
• Step 5: Choose Pair with TV App on the profile page.
• Step 6: A pairing code will appear on your TV. Enter this code on your mobile device and click OK. The TV screen will refresh, and the TVBAnywhere+ homepage will appear.

Yes, all PPV purchases are subjected to a 8% Service Tax beginning 1st March 2024. Additionally, note that the prices displayed are excluding Service Tax.

Your two-months Prime Video access begins on the day you activate your account.

1. Open/Download the My Astro app or visit My Astro web.

2. Login with your Astro ID.

3. Go to Account.

4. Under Billing, tap on Auto Debit.

5. Tap on 'Remove'.

6. Tap on 'Confirm' to remove the card.

7. Your registered card removed .

Yes, this is a one-time approval, and you do not need to submit your application every month.

You will be able to enjoy all the content on the iQIYI app immediately upon successful purchase from the Astro website. You may enjoy your VIP privileges from the iQIYI app on your Ultra Box, Ulti Box, mobile devices (Android & iOS), Apple TV, Android TV, as well as on Web (www.iq.com).Please ensure that the account used to log in to the app is the same one used to purchase your iQIYI VIP subscription.

Yes, you may assign your family or friends to help you drop off the Astro box.

Ensure that your push notification is enabled for My Astro app for a smooth transaction authorisation process or follow these steps if you still don't receive the alerts: 

Launch the My Astro app, tap the gear icon on top right of the screen to go to Manage. Under Settings, tap on SecureGo.

Tap on Authorisation and you will be able to see pending transaction details .

At this point in time, the Disney+ app on Astro Ultra and Ulti Box does not support Dolby audio. We are working to enable this in a future update.

Bahasa Malaysia (BM) and Traditional Chinese subtitles will be available where rights permit. However, subtitle availability may vary depending on the title.

If you have a random Astro power cable, remote control or old box lying around at home, you are required to discard them only at registered collection centres for proper handling and management of e-waste in an environmentally sound manner. Click here to find a registered collection centre near you.

For all recycling-related questions, please click here.

As an existing customer, you will notice some changes after migrating to the new Disney+ app as some personalised viewing data, such as profiles, viewing activity, downloads and app preferences, will not be migrated.

Therefore, you will need to set up your profiles and preferences again when you first start using the new Disney+ app.

For further enquiries regarding the Disney+ app migration, new Disney+ app experience and app-related features, please visit the Disney+ Help Centre.

If you see the ‘Subscribe to Prime Video’ message on the Prime Video app, it means you have not activated your access through Astro. Please press the Back button on your remote and follow the steps provided here:
https://support.astro.com.my/question/i-have-activated-my-prime-video-access-with-astro-how-do-i-log-in-and-watch-prime-video-on-my-ultra-ulti-box

For Astro Ultra Box or Ulti Boxes, you will be able to see an itemised charge called "Box Fee” in your Astro bill.

1. Please standby computer/laptop to access to the internet and connection must be via LAN (cable) [Connect the LAN (cable) to the yellow port in Maxis Router and direct to computer/laptop].

2. You may open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox and etc.

3. On the address bar, please go to http://192.168.1.254 and below page will appear.

If below box appear, please enter required details as below:

USERNAME: Administrator

PASSWORD: (ACCESS KEY AT THE RGW STICKER)

(These are the defaults, if you have done previous configuration on your router the password may be different)

4. Once enter into the page ‘’TECHNICOLOR TG784N V3’’, you may follow below step for the wireless information.

i. Click "Configure”

ii. Once clicked configure button, below screen will appear.

A. This is your current password. Please delete and enter the new password.

B. Once completed the selection; click the "Apply" button. Router will auto reboot and connection re-establish after few minutes.

Please re-connect your wireless using the new password.

Step 1: Close the "Astro ID Login" tab in your browser, then close your mobile app browser (Safari, Google Chrome, Mozilla Firefox etc).
Step 2: Close the beIN SPORTS CONNECT app on your mobile device.
Step 3 Reopen the beIN SPORTS CONNECT app and try to log in again

STEP 1

Press "HOME" button on your remote control.

STEP 2

Navigate to Settings and press "OK".

STEP 3

Navigate to Display and press "OK".

STEP 4

Navigate to Resolution and press "OK".

STEP 5

Navigate to your preferred selection and press “OK”.

STEP 6

Select Yes, continue and press "OK" to confirm on the changes.

Otherwise, select No, go back to cancel.

If you cancel your Astro X3 subscription mid-month while still under contract, the termination will take effect at the end of your current billing cycle. Your service will remain active until then, and no partial or prorated refund will be provided. And early termination fee charges may still apply.

However, refunds may be applicable if there is an excess credit balance in your account, such as an overpayment or duplicate payment. Any eligible refund will be processed in accordance with Astro's refund policy.

You must subscribe to an Astro subscription (NJOI customers are not eligible) in order to get the Ulti Box.

The eligibility criteria for the Ulti Box are as follows:

New Customers

All new Astro customers with a monthly subscription fee of below RM100 will be entitled to select the Ulti Box upon signing up for Astro’s packages.

Existing Customers (Box Upgrade for Primary or Multiroom)

Existing customers are required to have an internet connection at home with a recommended internet speed of 10Mbps and above in order to upgrade your existing box to Ulti Box.

Note:

· Existing Ultra Box customers are not eligible for a swap to the Ulti Box.

· If your existing box is a PVR, you will lose access to all the recordings stored in the PVR

Multiroom (New subscription)

Customers subscribing for an additional multiroom subscription are entitled to select the Ulti Box as part of the subscription.

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Settings.

STEP 3

Navigate to Audio and press "OK".

STEP 4

Navigate to your preferred selection and press “OK”.

Please refer to these FAQs for more information, or click here to learn more and sign up for the Ultra Box. Alternatively, you may call 03-7481 8000 to get in touch with an Astro representative.

Step 1: User press ‘YELLOW’ button to change mobile number.

Step 2: Scan the QR Code on your Ultra Box/Ulti Box using your mobile phone.

Step 3: Update your mobile number.

Step 4: Click on ‘Mobile number updated’ upon mobile number update completion and continue with OTP validation again.

Step 5: Once the mobile number has been successfully updated, please continue with the activation process.

For customers with the Ultra or Ulti Box, please ensure to provide your latest contact details to our Astro agent during the call to terminate your account, this includes your mobile number and house address. If you still need further help, please contact us at 03-9543 3838.

Prime Video is available as an add-on to all Astro customers at RM25 per month (tax included). However, Prime Video is available to the following Astro customers at no additional cost:

• Customers on the Ultra/Ulti Box with either the Astro One Epic Pack or Movies Pack as part of their subscription bundle.
• Customers not on the Ultra/Ulti Box but subscribed to either the Astro One Epic Pack or the Movies Pack as part of their subscription bundle, starting 24 June 2025.

If you're trying to visit a website and it won't load, but others do, there could be a variety of causes. If the site itself is down, there's not much you can do but wait.

If you can load the site on other computers or devices (make sure you try different means of connecting to the internet), there may be an issue with your computer or network.

There are some quick fixes that will solve most problems, but you may have to get your hands a little dirty.

1. Try loading the site on a different device.
   • Try loading the website on your phone or on another computer. If the website loads on the other device, the problem lies with your computer.
   • If the website doesn't load on another device, the problem is either with the network
2. Restart your computer.
   • Oftentimes, a simple reboot will fix the problem you're having. Reboot your computer and test the website again.
3. Try loading the site in a different browser.
   • There may be some settings configured incorrectly on your browser. Try a different web browser to see if you can load the website.
4. Temporarily disable your antivirus program.
   • Your antivirus software may be interfering with your ability to load certain websites.
   • Try disabling the software and then loading the site again. Make sure you enable it again once you have identified the problem.
5. Reset your modem and router.
   • Traffic to or from a certain website may be getting tripped up by your modem or router. Resetting these devices may allow you to access the website again.
6. Check your computer's date and time settings.
   • If your date or time is set incorrectly, you may not be able to connect to secure (https://) websites.
   • Check your computer or mobile device's clock to make sure that it is set to the correct time and date.

In the event the problem persists, please provide below details for further escalation:

i. List of websites effected.
ii. Run the Speed Test via LAN (cable) and Wi-Fi connection - Please click here for Speed Test guideline.
iii. Run the Traceroute Test - Please click here for Traceroute Test guideline.
iv. Run the Ping Test - Please click here for Ping Test guideline.

Once you've gathered all the results, kindly send them all through the Feedback Form below.

Quick Info
A Speedtest is a service that provides free analysis of Internet access parameters, such as connection data rate.
A Ping Test shows how long it takes for packets to reach host.
A Traceroute Test traces the route of packets to destination host from our server.

Successful payment via JomPAY will be posted real time.

Band Steering is a functionality that our WiFi router (Huawei K562E) has that intelligently connects devices to its WiFi to the best frequency bands available based on usage, speed and coverage by using only one same SSID for both 2.4GHz and 5GHz band.

Yes, you can change your subtitle and dubbing for your contents, however, the dubbing may differ from content to content.

For customers who wish to have their physical tax invoices reprinted, there will be a flat fee of RM10.00 levied as part of the process which has been implemented since year 2015.