While we understand that some customers prefer to buy individual channels, the new packs are designed to offer content at a more affordable price by bundling channels together. As a result, individual channel purchases (ala carte) are not available with the new packs. This approach helps us provide a wider range of content at better value for all customers.

While there is no limit on device registrations, concurrent viewing limits depend on the HBO Max subscription plan: the HBO Pack with HBO Max Premium plan allows streaming on up to 4 devices simultaneously, whereas the HBO Pack with HBO Max Standard plan permits streaming on up to 2 devices at the same time.

1. Please standby computer/laptop to access to the internet and connection must be via LAN (cable) [Connect the LAN (cable) to the yellow port in Maxis Router and direct to computer/laptop].

2. You may open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox and etc.

3. On the address bar, please go to http://192.168.1.254 and below page will appear.

If below box appear, please enter required details:

USERNAME: Administrator

PASSWORD: (ACCESS KEY AT THE RGW STICKER)

(These are the defaults, if you have done previous configuration on your router the password may be different)

4. Once enter into the page "'TECHNICOLOR TG784N V3'', you may follow below steps to get the best wireless channel information.

A. Select "Home Network".

B. Click "WLAN: SSID" to proceed to next screen.

C. In order to get the best wireless channel, click "Wireless Scan" to scan available surroundings wireless Channel.

D. Please choose channel with lesser number of usage.

Example in below case, you may choose channel 4.

5. To configure wireless channel, please proceed with below steps.

A. Select "Home Network".

B. Click "WLAN: SSID" to proceed to next screen.

C. Then, click "Configure" to change the channel selection (automatic to manual) and other configuration option.

D. Please ensure below items:

i. WLAN Enable: Tick

ii. Interface Enable: Tick

iii. Change the Channel Selection to Manual

iv. Change the wireless Channel based on Step 4(D).

v. Once completed the selection, click the "Apply" button.

To set up a Mesh WiFi network around your house, the Mesh unit will need to be paired with the WiFi router. Steps to pair these two devices are as follows:

i. Place the Mesh unit close to the WiFi router (within 2 meters) and power it on

ii. After the Mesh unit starts up, press and hold the WPS buttons of the Mesh unit and the WiFi router for 3 - 5 seconds in turn within 2 minutes

iii. After the WLAN and Internet indicators of the Mesh turns steady blue, the Mesh is connected to the Internet

iv. Move the Mesh to the desired place where you need to expand WiFi and power it on. After the Internet indicator turns steady blue, WiFi is expanded successfully.

Yes, this is a one-time approval, and you do not need to submit your application every month.

You may enquire by submitting a Feedback Form. Please choose the following feedback type and issue:

Feedback type : Payment/Billing
Issue : I want to ask about a refund

OR

Reach out via Astro Official Digital platform i.e. Facebook or Chat. Our agent will assist on your request.

No. There will be no changes to your monthly subscription fee as part of the refreshed channel lineup. You will continue to enjoy your current pack at the same price, along with the new channels and content additions.

If you’re an HBO Pack add‑on customer, you’ll continue paying the same RRP amount (depending on your subscription plan – Standard/Premium). If you’re on a combo plan / 50% discounted offer, you’ll keep to the discounted price until the promo expires. After the expiry, you may continue to subscribe to the HBO Max app as an ala carte add‑on via Astro from RM24.90/month.

The new packs and access to Netflix on the Ultra Box and Ulti Box is available for Astro IPTV customers.

You can subscribe to the Astro X3 packs through the following channels:

i. Customer Support: Astro Customer Service, Sales Representatives, or visit Astro Stores for assistance.
ii. WhatsApp: Reach out to our sales agent by sending “Hi” to 03-95433838, select Sign Up, and Connect to Agent.
iii. Astro Official Website: Visit https://product.astro.com.my/tv , choose the Astro X3 packs, and complete the sign-up to start streaming instantly.

Astro continuously reviews its product propositions to ensure we can provide the best customer experience for all our subscribers. We have discontinued the 50% multiroom in order to allow our Astro subscribers with a subscription fee of RM100 or more to only pay a standard RM49.99 (with box setup) to enjoy the Multiroom experience on an Ultra or Ulti Box.

We apologise for any inconvenience.

Once you have submitted your e-invoice request, it will be processed and you can receive the application results through My Astro website or app. Some applications may take longer to process due to unforeseen circumstances. We strongly advise you to provide your TIN number to facilitate the e-invoice issuance process.

Please use your Astro ID to log in to the Astro Fibre App. If you do not have an Astro ID, kindly follow the simple steps here to create one.

You have exceeded the maximum number of registered devices allowed. To manage devices on Astro GO, go to Settings > Registered Devices to view / remove devices from the list of registered devices to your account.

If you are still having issues, proceed to submit report via WhatsApp or Feedback Form.

STEP 1

Switch OFF the power of your Ultra / Ulti box and make sure that the adapter's power light is off.

STEP 2

Switch ON the power of your Ultra / Ulti box and make sure that the adapter's power light is on.

STEP 3

Put the box on standby mode.

STEP 4

Press and hold the Home button on the box.

STEP 5

Wait until "boot" appear on the front panel and released.

STEP 6

When “boot” appears, press “Standby”, “Left “, “Up” continuously until Auto Update appear on box screen and Software Update progress on TV.

Byond Box (DMT 4)

STEP 1

Switch OFF the power of your box and make sure that the adapter's power light is off.

STEP 2

Switch ON the power of your box and make sure that the adapter's power light is on.

STEP 3

Press Standby, Ch+, Standby keys on the box simultaneously when the "boot" message appears on the box front panel.

The Software Update progress screen will appears.

The update will take 10 - 15 minutes to complete. Please be patience.

Byond Box (New Zapper)

STEP 1

Switch OFF the power of your box and make sure that the adapter's power light is off.

STEP 2

Switch ON the power of your box and make sure that the adapter's power light is on.

STEP 3

Press the standby button repeatedly after switch on the power.

STEP 4

Press "OK".

STEP 5

The Software Update progress screen will appears.

The update will take 10 - 15 minutes to complete.

Please be patience.

No, the eKYC verification process must be done by the individual themselves, using their MyKad and selfie in real-time.

For enquiries relating to Disney+ content, application features, settings or functionality, please visit the Disney+ Help Centre.

You may cancel your iQIYI subscription in the app by following these steps:
Step 1: Go to Home Page
Step 2: Click on "VIP subscription"
Step 3: Click on "Manage VIP subscription" (Gear icon)
Step 4: Click on "Cancel VIP subscription"

After 62 days of non-payment, your broadband account will be terminated, and an Early Termination Fee (ETF) will be applied for the remaining contract. If you would like to continue with the service, you need to clear the outstanding balance and apply a new account.

The service tax rate for Astro Pay TV will be increased from 6% to 8%. The service tax for Astro Fibre, which falls under the category of telecommunication service, will remain at 6%.

You may still be using an older version of the Astro GO. To resolve this issue, please go to your respective app store and update your Astro GO app.

If you are still having issues, proceed to submit report via WhatsApp or Feedback Form.

No, the 12-month contract will not automatically renew. Customers are only required to serve one contract cycle, and there is no contract renewal.

Discover thousands of movies and series you'll love, and we are continuously expanding. If you would like to enjoy more movies on top of your current subscription, press the

Home

button and select

On Demand

. Use the arrow keys to scroll to

Store

. Pick and choose to rent any movie for up to 48hours.

No, Astro GO is a free app for Astro customers. The content available on Astro GO will depend on the subscription pack that you are subscribed to.

If you do not have an Astro subscription, please click here to find out packages available.

Below will be the process to terminate Astro account:

1. Account holder to give 30-day notice period for account termination.
2. Account will be scheduled for termination 1 (one) day before customer’s billing cycle date.
3. After account terminated, there will be a collection of Ultra/Ulti box and Broadband Equipment.

Notes: You need to settle the outstanding balance and penalty (if any)

Ultra/Ulti Box retrieval:

• West Malaysia except for East Malaysia, Tioman, Labuan and Langkawi – Courier partner will contact customer for box retrieval.
• East Malaysia, Tioman, Labuan and Langkawi – Installer will do the box retrieval.
• For other than Ultra/Ulti box, refer to recycle information here.

Broadband Equipment retrieval:

• Installer will do the equipment retrieval.

If you receive the "Device Was Not Found" error message, it may be because your device has been automatically removed due to concurrent streaming limits being exceeded.
Please perform the following checks and troubleshooting steps:

1. Stop streaming on one of the other devices currently using your Astro account.
2. Close the Astro Go app on any unused devices.
3. Return to your Smart TV and try streaming again.

If you are unable to remove a device or continue to see the error message, proceed to submit report via WhatsApp or Feedback Form and provide:

• Astro ID use
• Smart TV model
• OS version
• Error reported on device

This will help our support team investigate and assist you further.

- Credit or Debit Cards
- Visa
- Mastercard
- Maybank2U - Pay using your Maybank2U account
- FPX - Pay using any local bank account via FPX
- E-Wallet - Touch "n Go

The Ultra/Ulti Plug & Play Box comes with a one-year box hardware warranty.

For self-installation, there is a warranty seal at the bottom of the Ultra/Ulti Plug & Play Box, which must not be removed or tampered with as this would void the one-year Ultra/Ulti box hardware warranty.

Any Astro GO compatible device (mobile/tablet/PC) and Multiroom Smart TV* compatible TVs will benefit from Astro GO+.

Astro X3’s no-contract option is part of our upcoming offering to give customers greater flexibility and control over their viewing experience.

It is designed with simplicity and ease in mind—allowing customers to sign up, pause, or cancel at any time. More details on how it works and what’s included will be shared soon.

Stay tuned for updates!

You will be able to enjoy your Viu Premium membership immediately upon purchase/choosing it
under your Asian Favourites bundle option. For further clarification, feel free to reach out to us
via WhatsApp by typing “Hi” at 03-9543 3838.

You will be able to access Netflix on your Ultra and Ulti Box. However, kindly note that if you have an Ulti Box with a Netflix Premium subscription, you will not be able to watch content in 4K UHD and Netflix Spatial Audio.

Customers without an Ultra or Ulti Box can still enjoy the HBO Max app on their smart devices (Android/ iOS) or by visiting

https://www.hbomax.com

. To enjoy HBO Max on the Ulti/ Ultra box, customers can upgrade to the Ulti/Ultra box. You can check your eligibility for a free box swap through the following methods:

1. Log in to the My Astro app.
2. Send a WhatsApp message with "Hi" to 03-9543 3838, select "Upgrade," and then select "Box Upgrade."

1. For WiFi connection:
   • For Internet speeds up to 300Mbps, the user needs to have minimum WiFi 802.11n (5GHz) capabilities
   • For Internet speeds up to 500Mbps, the user needs to have minimum WiFi 802.11ac (5GHz) capabilities
   • For Internet speeds up to 800Mbps, the user needs to have minimum WiFi 802.11ax (5GHz) capabilities
2. For Wired connection:
   • The users need to use Cat5e Network cable or better and have their device equipped with 1Gbit Network Interface Card (NIC)
3. A summary of the minimum specifications for devices as tabulated below:

1. Number of WiFi antennas in the client device
2. Distance and WiFi signal strength between client device and RGW/Mesh AP
3. Overall WiFi signal congestion/pollution in area
4. Total number of devices connected to the RGW/Mesh AP

Remarks: As a note, even meeting those minimum requirements, it is not a guarantee that devices connected over WiFi will be able to take advantage of the maximum subscribed speeds due to one or more of the following:

• Distance from the RGW/Mesh AP
• Client's Wi-Fi hardware specifications/capabilities
• Overall Wi-Fi signal quality in the area

Visit https://product.astro.com.my/box or check out our user guide for a quick and easy way to get started!

There are few ways to get for your refund.
Click here for details:

Yes, you can. On your Account page and go to Profile. Click edit on Service address to change your address details. You may also request for installation assistance if it's required for the new address.

Download My Astro app or visit the My Astro website.

If you see the error message "There is No Internet Connection" while using the Astro app on your Smart TV, please follow these troubleshooting steps:

1. Check Your Internet Connection

• Confirm whether your Smart TV is connected to the internet via Wi-Fi or a LAN (Ethernet) cable.

2. Check the LAN Cable Connection (if using Ethernet)

• Ensure the LAN cable is securely connected from the router's LAN port to the TV's LAN port.
• Verify that the LED indicator lights on both the router and TV network port are active.

3. Test the LAN Cable

• Connect the same LAN cable to another device (for example, a laptop or another Smart TV).
• Check whether the device can access the internet to confirm the cable is functioning properly.

4. Reconnect to Wi-Fi (if using Wi-Fi)

• Go to your TV's network settings.
• Select your home Wi-Fi network and choose Forget Network.
• Reconnect to the Wi-Fi network by entering the password again.

5. Check Other Devices

• Verify that other devices in your home (such as smartphones, tablets, or laptops) can connect to the same Wi-Fi network.
• If all devices are unable to connect, the issue may be with your internet service.

6. Restart Your Devices

• Turn off and restart the following devices:

• Router
• Modem (if applicable)
• Smart TV

• Wait a few minutes for the internet connection to stabilize.
• Launch the Astro app again and test the playback.

If you are still having issues, proceed to submit report via WhatsApp or Feedback Form and provide:

• Astro ID use
• Smart TV model
• OS version
• Error reported on device

This will help our support team investigate and assist you further.

Step 1: Separate Your Wi-Fi Network Name

First, you need to set up your Wi-Fi to Dual-band in order to be less susceptible to interference, and allows you to choose between the 2.4GHz or 5GHz bands when connecting a device. A Wi-Fi frequency of 5GHz is best when you are near your router, and 2.4GHz is best for when you are far from your router.

• Check the bottom of your router for a website or IP address, username, and password.

Below are details for a standard login based on a standard router issued by ISP (Telekom Malaysia, Maxis, and Time dot Com)

• Login to your account
• Identify your Wi-fi Settings (This could be in advanced settings)
• Identify both the 2.4GHz and 5GHz options.
• Split the signals by renaming the 2.4GHz and 5GHz signals respectively, and make sure both are enabled.
• For detailed instructions based on router model, on how to separate your Wi-Fi, click here and choose the option according to your ISP and router brand.

Step 2: Factory reset your Ultra Box by following the steps below.

a. Press the Home button on your remote

b. Go to your settings page

c. Scroll down and select Reset/Restore

d. Select restore factory settings and proceed

e. Enter your PIN to access restore factory settings (default pin: 0000)

f. Choose restore and wait until the box reboots automatically. This may take around 2 minutes and you will see the Astro logo again when it's done.

Astro invests billions of ringgits in content annually to keep Malaysians entertained and informed. Hence, we work alongside industry players, content partners and regulators in protecting intellectual property so that Astro can continue to produce and aggregate compelling content for our viewers.

We continue to educate and raise awareness among the public and businesses about the economic and social losses caused by content piracy. You can play your part in combating piracy by reporting potential copyright infringement of Astro content to the Domestic Trade and Consumer Affairs Ministry (KPDNHEP) on the following channels:

• 1-800-886-800 (hotline)
• 03-8882 6088 (Enforcement Command Centre)
• +6019-279 4317 (WhatsApp)

You may report the incident on WhatsApp at 03-95433838 by typing PNP and our dedicated agents will attend to your matter. Please have your Airway Bill tracking numbers ready for validation.

If a replacement box/Astro SIM card is deemed necessary, a new Plug &Play Box and a new Astro SIM card will be couriered to your service address.

Please ensure to put your box on standby mode to refresh the signal.

a. Using MyAstro web

STEP 1
Go to https://myastro.astro.com.my/ in your web browser.

STEP 2
Key-in your Email / Mobile number and password. Then, press LOG IN.

STEP 3
Click on TV pack.

STEP 4
Choose Main Room for the Primary Box; else choose Multiroom (If any).

STEP 5
Click on "Refresh" to refresh signal on your box.

For Main Box

For Multiroom

STEP 6
After tap the Refresh, below notification will be displayed as below.

For Main Box

For Multiroom

b. Using MyAstro App

STEP 1
Open myAstro App and click "Login".

STEP 2
Key-in your Email / Mobile number and password. Then, press "LOG IN".

STEP 3
Go to "Account".

STEP 4
Scroll down to "TV pack" and click on it.

STEP 5
Choose Main Room for the Main Box; else choose Multiroom (If any).

STEP 6
Tap on "Refresh" to refresh signal on your box.

For Main Box

For Multiroom

STEP 7
After tap the Refresh, below notification will be displayed as below.

For Main Room

For Multiroom

c. Using WhatsApp

1. Message 'Hi' to us at 03-9543 3838
2. Click on Tap Here for Options
3. Select Help & Support
4. Type Refresh HD Enabled Box Signal

You will be able to watch the same video on demand content on your Ultra/Ulti Box as the ZEE5 mobile app or website. However, ZEE5 live channels are currently not available on the Ultra/Ulti Box. Please stay tuned for updates!

Yes, the 6% Service Tax will be imposed for Astro Smartcard/SIM card replacement effective bill date 9

th

July 2024 onwards.

Video On Demand (VOD) is a new way of enjoying your Astro, for free* as part of your subscription. Here's what you can do by watching your show via VOD:

1. Pick and choose your show anytime of the day without needing to wait for your show to air.

2. Catch-up on episodes you've missed or binge-watch all episodes instantly.

3. Pause, rewind, or fast-forward to your favourite parts of the show.

4. Watch full uncut episodes.

5. No weather or other disruptions during your viewing time.

6. Browse our library of recommended shows for you based on your viewing history. Everything you see is free as part of your subscription.

7. To rent additional blockbuster movies on a pay-per-view basis, visit the "Store' section in our VOD library.

1. Please standby computer/laptop to access to the internet and connection must be via LAN (cable) [Connect the LAN (cable) to the yellow port in Maxis Router and direct to computer/laptop].

2. You may open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox and etc.

3. On the address bar, please go to http://192.168.1.254 and below page will appear.

If below box appear, please enter required details as below:

USERNAME: Administrator

PASSWORD: (ACCESS KEY AT THE RGW STICKER)

(These are the defaults, if you have done previous configuration on your router the password may be different)

4. Once enter into the page ‘’TECHNICOLOR TG784N V3’’, you may follow below step for the wireless information.

i. Click "Configure”

ii. Once clicked configure button, below screen will appear.

A. This is your current password. Please delete and enter the new password.

B. Once completed the selection; click the "Apply" button. Router will auto reboot and connection re-establish after few minutes.

Please re-connect your wireless using the new password.

Please check your internet speed and connection status via internet connection test. If your internet is working fine and the issue persists, proceed to submit report via WhatsApp or

Feedback Form

.

STEP 1

Press "HOME" button on your remote control.

STEP 2

Navigate to My TV and press "OK".

STEP 3

Navigate to Bookings and press "OK".

STEP 4

Your list of your booking programs will be displayed.

Astro SuperSport channels have been updated to make it easier to recognize the channels by the sports they feature, such as Astro Premier League, Astro Football, and more. All channels will be updated based on your subscription. Find out more

Currently, you can only select one Netflix subscription at a time. Your available options include the Basic 24 Months, Standard 24 Months, or Premium 24 Months plans.

Watch this video or follow below steps to perform installation setup - Plug and Play Mode - Ultra Box / Ulti Box

STEP 1
Please wait while your Astro box initializes.

STEP 2
Select your preferred language.

STEP 3
Navigate to Next and press "OK".

STEP 4
Select Auto as the Video Resolution.

STEP 5
Navigate to Next and press "OK".

STEP 6
Navigate to Confirm and press "OK" to confirm your selection if you are able to read the texts on screen properly.
Otherwise, navigate to Cancel to revert to the previous settings.

STEP 7
Select IPTV Plug & Play (self-install) as the box operating mode.

STEP 8
Navigate to Next and press "OK".

STEP 9
Select your preferred connection.
For connection via Wi-Fi, proceed to STEP 10.
For connection via LAN Cable, proceed to STEP 16 once you are connected.

STEP 10
Please wait while your Astro box searches for available Wi-Fi networks.

STEP 11
Navigate to your preferred Wi-Fi network and press "OK".

STEP 12
Please enter the password to connect to the Wi-Fi network.

STEP 13
Navigate to Done to continue.

STEP 14
Please wait while your Astro box connects to the internet.

STEP 15
Navigate to Yes to allow your Astro box to connect to this network automatically.
Otherwise, navigate to No.
Proceed to STEP 16 for the next step.

STEP 16
Your box's connection status will be displayed.
Navigate to Finish to complete the setup.