Users can easily access all their streaming Apps such as Netflix, Disney+, Viu etc by clicking the “APPS” button on their remote control. After clicking this button, they will be brought to the Apps rail under the home page.

Below will be the process to terminate Astro account:

1. Account holder to give 30-day notice period for account termination.
2. Account will be scheduled for termination 1 (one) day before customer’s billing cycle date.
3. After account terminated, there will be a collection of Ultra/Ulti box and Broadband Equipment.

Notes: You need to settle the outstanding balance and penalty (if any)

Ultra/Ulti Box retrieval:

• West Malaysia except for East Malaysia, Tioman, Labuan and Langkawi – Courier partner will contact customer for box retrieval.
• East Malaysia, Tioman, Labuan and Langkawi – Installer will do the box retrieval.
• For other than Ultra/Ulti box, refer to recycle information here.

Broadband Equipment retrieval:

• Installer will do the equipment retrieval.

We would need you to run few tests in order for us to understand your issue and to assist you in fixing the problem.

This will not take longer than 15 minutes.

1. Please run each of the test using your laptop or personal desktop by connecting to your Astro Fibre.
2. Please list down the impacted website (Provide us the complete URL i.e. www.astro.com.my).
3. We need you to run below tests and compile the pictures or screenshots of your test results into one file (i.e Microsof Word document, PDF file) and send to our agent in order for us to assist you further:
   • Run the Ping & Traceroute Test - For guidance, please click here for Ping & Traceroute Test guideline.
   • You may run this by connecting via WiFi or LAN cable. Your test result will appears as per below screen and take a screenshot.

Ping Test Result

Traceroute Test Result

• Run the Speed Test - For guidance, please click here for Speed Test guideline.

We need you to run the Speed Test using both WiFi connection and LAN cable.

Speed Test Result

4. Once you've gathered all the results, attach in Feedback Form for further assistance.

Quick Info
A Speed Test is a service that provides free analysis of Internet access parameters, such as connection data rate.
A Ping Test shows how long it takes for packets to reach host.
A Traceroute Test traces the route of packets to destination host from our server.

Kindly refer to the steps below to log in:

STEP 1

Click on the Disney+ app logo under the Apps rail on your Home page

STEP 2

Select Log In

STEP 3

Scan the QR code or visit the website on screen to log in

STEP 4

Key in the on-screen code to pair your TV

STEP 5

Enter your email address or mobile number associated with your Disney+ subscription

STEP 6

Select whether you want your OTP to be sent to your email address or mobile number

STEP 7

Key in your OTP

STEP 8

Review and agree to the Disney+ terms

Only applicable to first time log in to Disney+ after the app migration

STEP 9

Create your user profiles

Only applicable to first time log in to Disney+ after the app migration

STEP 10

Select your user profile on your TV screen to start watching

STEP 1: Power Off the Box

Switch off the power for your box. Ensure the adapter's power light is off.

STEP 2: Remove the Smart Card

Locate the Smartcard at the front or right side and gently pull it out.

STEP 3: Clean the Smart Card

Wipe the Smartcard's gold chip clean using a dry soft cloth.

STEP 4: Reinsert the Smart Card

Make sure the gold chip is facing upwards. Insert the Smart Card fully into the slot until it seats firmly.

STEP 5: Power On the Box

Switch on the power for your box and make sure that the adapter's power light is on. Please wait for 5 minutes.

STEP 6: Turn On the Box

Power on the box and check if the issue is resolved.

If issue persist, please submit the issue on our Feedback Form and attach a picture of your smart card number for assistance or chat us via WhatsApp at 03-95433838.

If you’re facing issues updating your mobile number via My Astro, here’s how you can update your mobile number through your Set Top Box (STB).

• Follow Method A if your box uses a satellite dish (Applicable to all boxes).
• Follow Method B if you are on Ultra or Ulti box that is connected to the internet.
• If your box has both, either method will work.

Method A:

1. Switch on your box and navigate to Channel 105 OR Channel 201 OR Channel 308 OR Channel 802.
2. Press on the red button on your Astro remote control and a QR code will be displayed on your screen.
   
3. Scan the QR code on a mobile device.
4. On the newly opened webpage, please enter your new mobile number.
   
5. To verify your identity, please enter the last 6 digits of the Astro account holder’s MyKad/Passport.
   
6. Please enter the OTP sent to the new mobile number.
   
7. Once the OTP is verified, your mobile number will be updated.
   

Method B:

1. Switch on your box and launch My Astro through the top menu or from the ‘Apps’ section.
2. Once you are in My Astro, press the yellow button on your Astro remote control to visit your ‘Account details’.
   
3. Press the down button to view ‘Personal info’.
   
4. Press the left button and focus on the edit icon for mobile number, press on "OK" to change your contact details.
   
5. To verify your identity, please enter the last 6 digits of the Astro account holder’s MyKad/Passport.
   
6. Please enter your new mobile number.
   
7. Please enter the OTP sent to the new mobile number.
   
8. Once the OTP is verified, your mobile number will be updated.
   

If you’re still unable to update your mobile number, kindly reach out to us via our Feedback Form and a representative from our team will get in touch to assist you soon.

No. There will be no changes to your monthly subscription fee as part of the refreshed channel lineup. You will continue to enjoy your current pack at the same price, along with the new channels and content additions.

If you’re an HBO Pack add‑on customer, you’ll continue paying the same RRP amount (depending on your subscription plan – Standard/Premium). If you’re on a combo plan / 50% discounted offer, you’ll keep to the discounted price until the promo expires. After the expiry, you may continue to subscribe to the HBO Max app as an ala carte add‑on via Astro from RM24.90/month.

Yes, you will need to activate SecureGo again.

You can opt in to e‑Invoicing via the My Astro website or the My Astro app by following the steps below. Depending on your profile, you may be asked to provide additional details. Please scroll down to review the information required before proceeding.

Via the My Astro website:

1. Log in using your Astro ID.
2. Click Bills, scroll down to e-Invoice, and toggle it on.
3. You may need to enter your information (scroll down for more info) and click Acknowledgement to confirm.

Via the My Astro app:

1. Log in using your Astro ID.
2. Tap your account number or the default profile icon at the top left.
3. Scroll down to the Billing section, select e-Invoice, and turn the toggle on.
4. You may need to enter your information (scroll down for more info) and click Acknowledgement to confirm.

Details you may be required to provide:

The information required depends on your customer profile.

Note: You may obtain your TIN from the MyTax Portal or visitthe nearest IRBM branch

All new and existing Astro TV customers can subscribe to WeTV VIP for only RM10.50/month by following the steps below:

Step 1: Go to www.astro.com.my/product/apps/wetv and select Get it now

Step 2: Log in with your Astro ID

Step 3: Key in your mobile number and proceed to add WeTV to your bill

Step 4: Once you have validated your mobile number via the OTP code, you will be able to enjoy VIP-exclusive shows on WeTV!

If your submission was unsuccessful, you can reapply through the My Astro website or app. We strongly advise you to provide your TIN number to facilitate the e-invoice issuance process. Alternatively, you can reach out to us via Astro Help & Support for assistance.

Youou may visit and follow the steps shown in https://biz.astro.com.my/home-resources/astrobiz-selfcare-user-guide to create you Astro ID.

No, there will be no changes to your existing Astro subscription, package, pricing, or services. You can continue enjoying your current Astro experience as usual. The launch of Astro X3 does not affect your existing subscription unless you choose to make changes to your plan.

1. Open/Download the My Astro app or visit My Astro web.

2. Login with your Astro ID.

3. Go to Account.

4. Select 'Profile'.

5. Under Addresses, tap on the edit icon.

6. Select 'Approve' to update service address.

7. Select the Residential type and key-in the postcode, Tap 'Check'.

8. Key-in the Street, House number and Area.

9. Select 'No, I'm all set' and tap 'Proceed'.

10. Tap ' Confirm'.

11. A successful notification will be displayed.

Astro GO+ is a service add-on that:

• Enables the simultaneous viewing of Astro GO for up to 4 users/devices.
• Increases the cloud recording storage from 200 hours up to 1500 hours.

There will be no automatic migration. Customers will continue with their existing Astro plans as usual and may choose to subscribe to Astro X3 separately if they wish.

You will be able to enjoy all the content on ZEE5 immediately upon successful purchase from the Astro website. You may enjoy your Premium privileges from the ZEE5 app on your Ultra Box, Ulti Box, mobile devices (Android & iOS), Apple TV, Android TV, as well as on Web (www.Zee5.com).Please ensure that the email address used to log in to the app is the same one used to purchase your ZEE5 premium subscription.

No, customers without an Ultra/Ulti Box will not be able to enjoy Sun NXT via their Astro Box. However, they can enjoy Sun NXT on their mobile devices. To enjoy Sun NXT on their big screen, customers can upgrade to an Ulti/Ultra box. Customers can check their eligibility for the free box swap by logging into the My Astro app or by contacting Astro’s customer service at 03 9543 3838.

There are 2 methods of setting maturity ratings restriction on Netflix:

Method 1 – Create a Kids Profile in Netflix App on Ultra/Ulti Box

1. On the Netflix home menu, select “Switch Profile”

1. Select Add Profile. 

1. Name the profile.

1. Select Kids. Kids profiles have a logo 'Kids' on the profile icon so they are easy to identify. 

1. Select Continue. The new profile will show on the list of profiles on your account.

Method 2 – Manually set Viewing Restrictions for each profile

1. Go to https://www.netflix.com/profiles/manage

1. Select a Profile.

1. Under Maturity Settings, select Edit.

1. Enter your Netflix password.

1. You may select the desired Maturity Rating settings or add a particular title restrictions for the profile.

1. Select Save.

For more information kindly visit:

• https://help.netflix.com/en/node/114275

• https://help.netflix.com/en/node/114276

1. Please standby computer/laptop to access to the internet and connection must be via LAN (cable) [Connect the LAN (cable) to the yellow port in Maxis Router and direct to computer/laptop].
2. You may open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox and etc.
3. On the address bar, please go to http://192.168.1.254 and below page will appear.

The default login of the router as below. If you have done a configuration on your router previously, the password may be different.

Username: user
Password: Router S/N (Available on the sticker at the back of the router)

4. Once you have successfully login, the router's web-based setup page will appear. Please follow below steps for the configuration.

5. From the left menu, choose Wireless 2.4GHz and then click Basic Settings tab on the left menu to access to below screen.

6. You may change the Wireless Network Name (SSID) and the SSID Password to follow your preferences, then click "Save" for the changes to take place.

Please reconnect to the new wireless name with the new password once completed.

7. Since this is a dual band router, you will have 2 Wireless Network Names (SSID) i.e. 2.4GHz and 5GHz. You may connect to any of the SSID, preferably with a stronger signal available.

You may change the Wireless Network Name (SSID) and the SSID Password to follow your preferences for 5GHz by choosing Wireless 5GHz then click Basic Settings.

Click "Save" for the changes to take place and reconnect to the new wireless name with the new password once completed.

Starting 24 October 2024, Simply South will be available on the Ultra/Ulti box for Astro customers to enjoy on the big screen as well as web app and mobile app. If you are interested to upgrade to our latest Ultra/Ulti box and/or subscribe to Simply South subscription, please reach out to us via WhatsApp by typing “Hi” at 03-9543 3838.

Watch this video or follow below steps to Improve Slow WiFi Connection for Astro Fibre

Slow browsing using LAN cable

Looks like there is something wrong with your service connection.

Please run the Speed Test and attach the picture or screenshot of the speed test in the Feedback Form below, in order for us to provide further assistances.

Click here for Speed Test guideline.

Quick Info

A Speedtest is a service that provides free analysis of Internet access parameters, such as connection data rate.

Slow browsing using Wi-Fi

1. Router Positioning

Most people underestimate the importance of picking a good spot for a Wi-Fi router. Even a small shift in positioning could end up being the difference between day and night.

i) High vs. Low

Put the router as high up as possible to extend the broadcasting range of the radio waves. This also helps clear the router of possible interferences.

ii) Concrete & Metals

Make sure your router isn't blocked by any other objects, especially devices that are electronic. Also, avoid placing your router in your basement as this area is usually enclosed by a lot of concrete, which can be almost impossible for Wi-Fi signals to penetrate.

iii) Distance to Router

The further away from your router you get, the weaker the Wi-Fi signal. Therefore, the best option is to place your router as close to your devices as possible, but this is only practical if you have one main area where you tend to use your devices.

Otherwise, you should place your router near the center of your home. After all, Wi-Fi broadcasts in 360 degrees, so it doesn't make sense to put it at one end of the house.

2. Wireless Interference & Noise

You've probably never noticed but there are wireless signals all around you wherever you go and they're passing through you all the time. From where? Electronic devices, Wi-Fi routers, satellites, cell towers, and more.

Although Wi-Fi is supposed to be on a different frequency than most of these devices, the amount of radio noise can still cause interference. Some common causes of interference include:

i) Microwaves

ii) Bluetooth Devices

iii) Cordless Phone

3. Surrounding Wi-Fi signals

A truth of the modern world is that every household has their own Wi-Fi network, which can cause issues with channel overlap. This can be somewhat problematic in a townhouse, but is especially problematic in housing complexes and apartments where there can be many routers within close proximity.

Which is why it's important that you pick a good channel in your router settings. Modern routers can choose channels for you automatically, but sometimes it's better to investigate and find the best channel yourself.

4. Usage

More likely, however, is that the people on your network such as friends, roommates, or family members are participating in bandwidth-heavy activities like gaming and streaming Ultrabox/ Netflix.

Fortunately, if this is the case, you can prioritize your own network traffic by enabling Quality of Service in your router settings.

If the problem persists, please run a Ping Test, Traceroute Test and attach the picture or screenshot of both test results in the Feedback Form below, in order for us to provide further assistances.

Please make sure to attach the required screenshot(s) in ONE file (i.e. Microsoft Word document, PDF, Image file) before submitting the form.


Quick Info
A Speedtest is a service that provides free analysis of Internet access parameters, such as connection data rate.
A Ping Test shows how long it takes for packets to reach host.
A Traceroute Test traces the route of packets to destination host from our server.

Astro SuperSport channels have been updated to make it easier to recognize the channels by the sports they feature, such as Astro Premier League, Astro Football, and more. All channels will be updated based on your subscription. Find out more

You do not need to request for a reconnection as our system will detect your payment and process it immediately, provided you paid via a real-time payment channel.

Click here for a full list of our payment channels.

You will receive an SMS from us informing you of the receipt of your Astro Box. However, if you wish to track the delivery of your Astro Box, you can use the tracking number available on the consignment note.

To request for a move, you may choose to:

(The fastest way) Self-serve by logging in to My Astro and follow the steps below:

1. Download the My Astro app or use the web version of My Astro
2. Login using your Astro ID
3. Go to Account > Profile > Address
4. Tap on the edit icon on 'Service address'
5. Verify your identity via SecureGo or OTP
6. Fill in your new address and confirm your relocation
7. A support ticket will be created and we will be in touch

OR

Submit your feedback via below link: https://support.astro.com.my/feedback-form

1: Choose Feedback Type

• Type: Technical issues
• Issue: I want to enquire about installation/ relocation

2: Fill in the form and click “Submit” support ticket.

Your two-months Prime Video access begins on the day you activate your account.

Yes, you can check the status of your application through the My Astro website or app.

Currently Astro GO is only available in Malaysia. You will not be able to access it if you are overseas.

There will be no changes as long as they relate to the Astro Broadband/Fibre services. This includes add-on subscriptions on Mesh WiFi, which remains at 6%.

No, the eKYC verification process must be done by the individual themselves, using their MyKad and selfie in real-time.

No. You will need to use a Malaysian mobile number registered with a local mobile network operator to register and activate your Disney+ subscription through Astro.

Please refer to the table below:

Note:

1. The table above is an approximation of the cancellation fee. The final fees will be calculated at the end of your subscription/upon downgrade.

1. Downgrade of Pack for Residential customers will be on basis of package ranking, whereas downgrade of pack for Astro & Broadband customer will be on basis of total monthly payment.

1. Package ranking in descending order:

• Platinum Pack (highest rank)
• Premium Pack 1/2/3 (same rank across 3 options)
• Entertainment / Sports / Movies Plus Pack
• Entertainment / Sports / Movies Pack (same rank across 3 options)
• Primary Pack (lowest rank)

Please find some examples (for Residential customers) as below:

Termination

Customer signed up for Entertainment Plus Pack (24-month contract) with Ultra Box. Customer decided to terminate the subscription 8 months into the contract. As the customer still has 16 months remaining, the maximum applicable fee will be RM41.67 x 16months = RM666.67

Pack downgrade

Customer signed up for Movies Pack (24-month contract) with Ultra Box. 18 months in, customer decides to downgrade to Primary Pack (24-month contract). As the customer still has 6 months remaining, the maximum applicable fee will be RM20.83 x 6months = RM125

Dropping off Netflix or Disney+ within first 12 months

Customer signed up for Entertainment Plus (24-month contract) with Ultra Box and 12-month commitment on Netflix App. 6 months in, customer decides to upgrade to Premium Pack 1 (24-month contract) which does not include Netflix App. As the customer still has 6 months remaining in the first 12 months of commitment for Netflix App, the maximum applicable fee will be RM41.67 x 6 months = RM250. Upon upgrading to Premium Pack 1, a new 12-month commitment for Disney+ App begins alongside the 24-month contract on the package.

4K content is currently not supported on the Ultra/Ulti Box. However, you can still enjoy Prime Video in 4K on compatible smart devices.

Yes, you can! Simply South is available for all Astro customers. Kindly reach out us via WhatsApp by typing “Hi” at 03-9543 3838 to know more!

No. The Sun NXT app subscription is currently only accessible within Malaysia.

You can get your TIN from the

MyTax Portal

or visit the nearest IRBM branch.

For multi-frequency customers, RM10.00 is charged per physical bill generated.

Yes. The highest video quality available on the TVBAnywhere+ app is 1080p.

STEP 1
On your remote, press the Home button and the home menu will be displayed on your screen.

STEP 4
Navigate to Add Profile.

STEP 5
Choose your Profile.

STEP 6
Input the Profile Name and navigate to DONE.

STEP 7
Choose the Age Group of the new profile and press "OK".

STEP 8
Your new profile will be shown in the Profile Selection Screen.

STEP 1

On your remote, press the HOME button.

STEP 2

Navigate to SETTINGS icon and press "OK".

STEP 3

Navigate to Manage Satellite Frequency and press “OK”.

STEP 4

Choose Test Satellite Frequency and press “OK”.

STEP 5

Choose "Confirm" to continue Test Satellite Frequency and press “OK”.

STEP 6

Satellite Frequency Test progress screen will be displayed.

STEP 7

The test result will be displayed once completed.

Customers are only allowed to choose ONE billing option (either Paper Bill or E-bill or SMS bill). However, customers who opted for Paper Bill will still be able to check their bills through My Astro app and My Astro web.

Astro X3 allow up to 2 concurrent streams at the same time, shared across your registered devices. If you’d like to enjoy more simultaneous viewing, you can add GO+ to increase to up to 4 concurrent streams for RM5.99 per month (exclusive of SST). While streaming is flexible across devices, only one Smart TV can be used at a time. The remaining streams can be used on mobile or other supported devices via Astro GO.

1. Open/Download the My Astro app or visit My Astro web.

2. Login with your Astro ID.

3. Go to Account.

4. Select 'Profile'.

5. Under Addresses, tap on the edit icon.

6. Select 'Approve' to update service address.

7. Select the Residential type and key-in the postcode, Tap 'Check'.

8. Key-in the Street, House number and Area.

9. Proceed wil below:
- Select 'Yes, I require installation services'.
- Key-in your mobile number.
- Choose 'I agree that relocation fee may be applicable'.
- Tap 'Proceed'.

10. Tap 'Confirm'.

11. A notification will be displayed after ticket created.

Option 1

1. Please turn off all devices (Modem and Router). By restarting your modem, you can isolate the possibility of overloaded processes in the modem, which would  impact its performance.    

2. Ensure the fiber cable from your wall socket and modem is securely connected.

Modem connection with Copper Cable

Notes: You might be connected to LAN 1 if backbone is Maxis

Router connection

3. Please make sure the LAN cable is connected properly from router (Port 1-4 - Yellow port) to PC/Laptop.

4. If the issue persists, submit your feedback form and attach your modem light indicator picture/video for further assistance.
 

Option 2/ Option 3/ Option 5/ Option 6

1. Please turn off all devices (Modem and Router). By restarting your modem, you can isolate the possibility of overloaded processes in the modem, which would  impact its performance.

2. Ensure the fiber cable from your wall socket and modem is securely connected.

Notes: You might be connected to LAN 1  if backbone is Maxis

Router connection

4. Please make sure the LAN cable is connected properly from router (Port 1-4 - Yellow port) to PC/Laptop.

5. Please make sure both cables on Router (Any Yellow port) and Astro Decoder (Network Port behind decoder) are properly inserted.

6. Switch on modem and router and please wait for 2 minutes to stabilise the devices after reboot.

7. If the issue persists, submit your feedback form and attach your modem light indicator picture/video for further assistance.

Option 4

1. Ensure Modem/Router are connected tightly to the power socket.

3. If the issue persists, submit your feedback form for further assistance.

There will be no penalty fee if you choose to cancel your iQIYI VIP subscription. Your cancellation will take effect upon your current entitlement expiry date. Kindly note that if you cancel your subscription within 24 hours before your entitlement expiry date as reflected in the iQIYI app (not according to Astro billing cycle), your subscription may be auto renewed.

You may download My Astro App or visit My Astro web to manage your account and information. You also change your contact details via your TV by using the remote. Follow the steps below:


A. My Astro App

Step 1: Log in with your Astro ID
Step 2: Go to the Account tab and select Profile
Step 3: Under Mobile Number, tap the edit icon
Step 4: Select your verification method. The OTP will be sent to your registered mobile number or email address.
Step 5: Enter the new mobile number and tap Next
Step 6: Enter the OTP sent to the new number and tap Verify
Step 7: A successful notification will be displayed

B. My Astro Web

Step 1: Log in with your Astro ID
Step 2: Go to the Personal Info button
Step 3: Step 3: Under Mobile Number, tap the edit icon
Step 4: Select your verification method. The OTP will be sent to your registered mobile number or email address.
Step 5: Enter the new mobile number and tap Next
Step 6: Enter the OTP sent to the new number and tap Verify
Step 7: A successful notification will be displayed

C. For Ultra and/or Ulti Users

1. Launch the My Astro app on your Home screen and you will land on your My Astro account dashboard. Then, press the yellow button on your Astro remote control to visit your "Account details".
2. Press the down button to view the "Personal info".
3. Press the left button and focus on the edit icon for the contact details, press on "OK" to change your contact details.

Multiroom discount rates will be removed upon splitting the account.

No additional subscription is required. Video On Demand (VOD) is a value-added service for all Astro customers with connected Ultra Box and Ulti Box. All you have to do is connect your box to your home Wi-Fi and you'll be able to access the world of on demand. Binge-watch, rewind, fast-froward and stream all your favourite shows anytime.