1. Please standby computer/laptop to access to the internet and connection must be via LAN (cable) [Connect the LAN (cable) to the yellow port in Maxis Router and direct to computer/laptop].

2. You may open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox and etc.

3. On the address bar, please go to http://192.168.1.254 and below page will appear.

If below box appear, please enter required details as below:

USERNAME: Administrator

PASSWORD: (ACCESS KEY AT THE RGW STICKER)

(These are the defaults, if you have done previous configuration on your router the password may be different)

4. Once enter into the page ‘’TECHNICOLOR TG784N V3’’, you may follow below step for the wireless information.

i. Click "Configure”

ii. Once clicked configure button, below screen will appear.

A. This is your current password. Please delete and enter the new password.

B. Once completed the selection; click the "Apply" button. Router will auto reboot and connection re-establish after few minutes.

Please re-connect your wireless using the new password.

Yes, you can. Once you update your email address, your next e‑bill will be delivered to the new email address you’ve provided. It’s important to make sure your email address is accurate so you can continue receiving your monthly e‑bill without interruption.

Click here for a step‑by‑step guide on how to update your email address.

For any unreturned equipment, penalty fee will be charged as below:

• Astro Box – RM100
• Router – RM200 (For Astro Fibre only)
• Mesh – RM200 each (For Astro Fibre only)

Yes, provided that your Plug & Play Box has not been activated and no later than 7 days upon receiving both the Plug & Play Box and Astro SIM card. In the event that you have activated your Plug & Play Box and wish to cancel, a contract penalty fee will apply.

We will reach out to you for a suitable time to pick up the Plug & Play Box and Astro SIM card.

Follow the steps below to access the TVBAnywhere+ app on your Ultra/Ulti box:

• Step 1: On the Home menu, go to the app rail and select TVBAnywhere+. A screen with Pair TVBAnywhere+ TV App and a QR code will appear.
• Step 2: Scan the QR code with your mobile device. This action will open the TVBAnywhere+ login page on your phone.
• Step 3: Click on the Astro logo from the partner picker list and login with your Astro ID.
• Step 4: The TVBAnywhere+ app will now launch. Select the ‘Me’ icon to open your profile.
• Step 5: Choose Pair with TV App on the profile page.
• Step 6: A pairing code will appear on your TV. Enter this code on your mobile device and click OK. The TV screen will refresh, and the TVBAnywhere+ homepage will appear.

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Settings.

STEP 3

Navigate to Remote Control Settings and press "OK".

STEP 4

Follow the steps appear on the screen to sync your Astro remote.

Intermittent internet connection using LAN cable

Looks like there is something wrong with your service connection.

Please run a Ping Test, Traceroute Test and attach the picture or screenshot of both test results in the Feedback Form below, in order for us to provide further assistances.

Please ensure to attach the required screenshot(s) in ONE file (i.e. Microsoft Word document, PDF, Image file) before submitting the form.

Intermittent internet connection using Wi-Fi
1. Router Positioning

Most people underestimate the importance of picking a good spot for a Wi-Fi router. Even a small shift in positioning could end up being the difference between day and night.

i) High vs. Low

Put the router as high up as possible to extend the broadcasting range of the radio waves. This also helps clear the router of possible interferences.

ii) Concrete & Metals

Make sure your router isn't blocked by any other objects, especially devices that are electronic. Also, avoid placing your router in your basement as this area is usually enclosed by a lot of concrete, which can be almost impossible for Wi-Fi signals to penetrate.

iii) Distance to Router

The further away from your router you get, the weaker the Wi-Fi signal. Therefore, the best option is to place your router as close to your devices as possible, but this is only practical if you have one main area where you tend to use your devices.

Otherwise, you should place your router near the center of your home. After all, Wi-Fi broadcasts in 360 degrees, so it doesn't make sense to put it at one end of the house.

2. Wireless Interference & Noise

You've probably never noticed but there are wireless signals all around you wherever you go and they're passing through you all the time. From where? Electronic devices, Wi-Fi routers, satellites, cell towers, and more.

Although Wi-Fi is supposed to be on a different frequency than most of these devices, the amount of radio noise can still cause interference. Some common causes of interference include:

i) Microwaves
ii) Bluetooth Devices
iii) Cordless Phone

3. Surrounding Wi-Fi signals

A truth of the modern world is that every household has their own Wi-Fi network, which can cause issues with channel overlap. This can be somewhat problematic in a townhouse, but is especially problematic in housing complexes and apartments where there can be many routers within close proximity.

Which is why it's important that you pick a good channel in your router settings. Modern routers can choose channels for you automatically, but sometimes it's better to investigate and find the best channel yourself.

4. Usage

More likely, however, is that the people on your network such as friends, roommates, or family members are participating in bandwidth-heavy activities like gaming and streaming Ultrabox/ Netflix.

Fortunately, if this is the case, you can prioritize your own network traffic by enabling Quality of Service in your router settings.

If the problem persists, please run a Ping Test, Traceroute Test and attach the picture or screenshot of both test results in the Feedback Form below, in order for us to provide further assistances.

Please make sure to attach the required screenshot(s) in ONE file (i.e. Microsoft Word document, PDF, Image file) before submitting the form.

Quick Info
A Ping Test shows how long it takes for packets to reach host.
A Traceroute Test traces the route of packets to destination host from our server.

STEP 1

Press any button on your Astro remote.

INDICATOR: LED blinking 3 times / NO LED blink

SOLUTION: Replace new battery

STEP 2

Check if you can change channel using your Astro remote control.

If issue remain after the battery replacement, try changing the channel manually directly from box front panel (If any).

If it's working, you might need to replace your Astro remote.

This might be due to a faulty Astro remote.

You may purchase it directly from Astro Exclusive Partners.

If confirm no issue with remote control, please refer to Decoder Hang at Channel troubleshooting steps here.

Starting 1 March 2026, customers can look forward to three new movies & entertainment channels — Astro Showtime (CH 411), Rock Action (CH 414) and Rock X Stream (CH 415) — each offering a distinct selection of popular films. Additionally, beginning 1 April 2026, another new channel, Astro FAM Time (CH 412), will be available to customers.

1. Astro Showtime (CH 411) - spotlights top titles from Hollywood and beyond
2. Rock Action (CH 414) - delivers non‑stop, action‑packed movies
3. Rock X Stream (CH 415) - brings together the world’s most talked‑about, critically acclaimed, and big‑budget series
4. Astro FAM Time (CH 412) - features family‑friendly favourites and feel‑good entertainment (available from 1st April 2026)

At the same time, Warner Bros. Discovery (WBD) and Astro's partnership model going forward will change how HBO content is accessed on Astro. From 1 March 2026, the HBO Max app will continue to be available to Astro customers as a standalone ala carte subscription, and the following HBO channels will be discontinued on Astro effective 11:59 PM on 28 February 2026:

1. HBO HD (CH 411)
2. Cinemax HD (CH 412)
3. HBO Family (CH 414)
4. HBO Hits (CH 415)

We understand how important this service is to many of our customers. Customers on any Movie bundle packages / Movies add-on / Astro One: Epic Pack who wish to continue enjoying HBO’s content can subscribe to the HBO Max app as an ala carte add‑on via Astro from RM24.90/month, with access to HBO Originals, blockbuster movies, and exclusive series. There will be no changes for Astro customers who currently subscribe to HBO Max as an add‑on.

4K content is currently not supported on the Ultra/Ulti Box. However, you can still enjoy Prime Video in 4K on compatible smart devices.

Only the account holder is allowed to manage the auto-debit facility. However, a third-party card holder has the right to withdraw their registered card from the linked-account with proper validation.

The payment will take some time to reflect in My Astro app and web account. If you experience any further issues or it is still not reflecting in My Astro, please reach out to us via WhatsApp at 03-9543 3838 for more details.

Here's how to refresh your smartcard in My Astro:

1. Open/Download the My Astro app or visit My Astro web
2. Login with your Astro ID
3. Go to Account
4. Tap on Subscription or TV pack
5. Tap on Rooms
6. For the box that you would like to refresh the smartcard, tap on 'Refresh' button. This will refresh your Astro box signal

📡 Experiencing technical issues?

📱 Download the My Astro app to:
- Perform self-troubleshoot
- Solve in a few minutes
- No need to call customer service

If you are unable to log in to the Astro Smart TV app, please follow the steps below:

1. Verify Your Astro ID Credentials

• Ensure you are using the correct Astro ID (email address/mobile number) and password.
• If you have forgotten your password, reset it via the Astro login page.

2. Check Your Internet Connection

• Ensure your Smart TV is connected to the internet.
• Test your internet connection by opening another app on the TV.
• Restart your router and Smart TV if necessary.

3. Update the Astro App and TV Software

• Make sure the Astro app is updated to the latest version.
• Check that your Smart TV firmware/software is up to date.

4. Restart the App

• Close the Astro app completely.
• Reopen the app and try signing in again.

5. Reinstall the Astro App

• Uninstall the Astro app from your Smart TV.
• Download and install it again from your TV's app store.
• Attempt to log in once more.

If you are still unable to log in, proceed to submit report via WhatsApp or Feedback Form and provide:

• Smart TV brand and model
• Screenshot/photo of the error message
• Astro ID (email address used for login)
• Details of the troubleshooting steps already performed

This information will help the support team investigate and resolve the issue more quickly.

If you need further help with the Astro Fibre app, you may call our Customer Contact Centre at 03 - 9543 1543 and an Astro agent will be available to assist you immediately.

Please perform the following checks and troubleshooting steps:

1. Check if your TV supports the Astro app.
The Astro app is generally available on selected:

• Android TV / Google TV
• Samsung Smart TV (selected models)
• LG Smart TV (selected models)

Kindly check that your Smart TV supports the Astro Smart TV app (kindly refer here).
If your TV uses a different operating system (e.g., older proprietary OS), the Astro app may not be available.

2. Update your TV software.
Go to: Settings → Support → Software Update
Install any available updates, then restart the TV and try again.

3. Search the correct app store

• Samsung: Apps
• LG: LG Content Store
• Android/Google TV: Google Play Store

Search for "Astro" or "Astro GO" (depending on your region and service availability).

4. If your TV's region is set incorrectly, certain apps may not appear.
Look under: Settings → General → Location/Region
Ensure it matches your actual country.
If you are still having issues, proceed to submit report via WhatsApp or Feedback Form and provide:

• Astro ID use
• Smart TV model
• OS version
• Error reported on device

This will help our support team investigate and assist you further.

Starting

12 December 2023

, users must log in using their

registered email address

,

mobile number

, or a

social account

(Facebook, Google, or Apple) to access any of Astro's digital platforms, including

My Astro

,

Astro GO

, and

Astro's official website

.

If you have a random Astro power cable, remote control or old box lying around at home, you are required to discard them only at registered collection centres for proper handling and management of e-waste in an environmentally sound manner. Click here to find a registered collection centre near you.

For all recycling-related questions, please click here.

STEP 1: Power Off the Box

Switch off the power for your box. Ensure the adapter's power light is off.

STEP 2: Remove the Smart Card

Locate the Smartcard at the front or right side and gently pull it out.

STEP 3: Clean the Smart Card

Wipe the Smartcard's gold chip clean using a dry soft cloth.

STEP 4: Reinsert the Smart Card

Make sure the gold chip is facing upwards. Insert the Smart Card fully into the slot until it seats firmly.

STEP 5: Power On the Box

Switch on the power for your box and make sure that the adapter's power light is on. Please wait for 5 minutes.

STEP 6: Turn On the Box

Power on the box and check if the issue is resolved.

If issue persist, please submit the issue on our Feedback Form and attach a picture of your smart card number for assistance or chat us via WhatsApp at 03-95433838.

Starting 23 March 2023, Astro customers will be able to enjoy ZEE5 Premium’s exciting content offerings for only RM10.80/month on the big screen via their Ultra and Ulti Box, website or on the-go via the ZEE5 mobile app, available on Android and IOS devices.

STEP 1

Choose your language preferences for both Menu Language and Info Language. Then, press "OK".

STEP 2

Select you box operating mode and press "OK".

STEP 3

Select the resolution supports by your TV and press "OK".

STEP 4

Press "OK" to proceed to the next screen.

STEP 5

Please select the LNB type and press "OK".

STEP 6

Select this as the Entry Point and press "OK" to confirm your selection.

STEP 7

Signal reading results for Tuner 1 and Tuner 2 screen will be displayed. Then, press "OK" to proceed to next screen.

STEP 8

Select Yes, continue and press "OK" to connect to Wi-Fi network.

STEP 9

Please wait while the box scanning for the available Wi-Fi network.

STEP 10

Select your Wi-Fi network and navigate to "Connect".

STEP 11

Please enter the password to connect to your network and press "OK".

STEP 12

You are successfully connected when this screen appears.

No, you are not allowed to change your due date or maintain your old due date. Your current due date is as per Astro Policy. Therefore, to ensure that you continue to enjoy uninterrupted services, we advise you to observe this change in due date from Day 30 to Day 25 and proceed with the necessary payment.

No, your subscription will be terminated at the end of your Astro billing date. Until then, you will still be able to access ZEE5 premium.

If an error message on your TV has one of the following keywords:
- Channels are temporarily unavailable due to bad weather.
- Service Currently Not Available
- SCNA
- (Code: SCNA)

You can proceed with below troubleshooting if the weather is good. Otherwise, you may try again later.

STEP 1: Check Weather Conditions

If the weather is bad, wait until it clears before proceeding.

STEP 2: Access STB Diagnostics

2a. Press the Home button on your Astro remote.

2b. Navigate to Settings and press OK.

2c. Navigate to STB Diagnostics and press OK.

STEP 3: Check Signal Strength

Refer to the signal strength % shown on the top left of your screen.

If it is 65% or higher, please take the screenshot and submit your Feedback Form.

If it is below 65%, please go to Step 5.

STEP 4: Power Off the Box

Switch off the power for your box and make sure that the adapter’s power light is off.

STEP 5: Reconnect Satellite Cable

Unscrew the satellite cable from the box and pull it out.

Plug the satellite cable back into the box and screw it back securely.

STEP 6: Power On the Box

Switch on the power for your box and make sure that the adapter’s power light is on.

Please wait for 5 minutes.

STEP 7: Contact Astro Support

If issue persist, please submit the issue on our Feedback Form and attach a picture of your General tab of the STB Diagnostics for assistance or chat with us via WhatsApp at 03-9543 3838.

Centralised Dish

If your Astro Box is connected to your apartment or condo building's centralised dish and the issue persists, please contact your respective Building Management before reaching out to our agents.

Unfortunately, the the drop off option is only available for non-DBB customer. For DBB customer we will arrange for our appointed agent to collect your equipment. You will receive a phone call from our representative within 3 business days from your termination date to schedule the collection.

For any transaction, you will be prompted with a push notification alert to replace SMS OTP. Tap on the push notification to view the secure verification screen, that allows you to "Approve" or "Reject" the transaction within 50 seconds. Rejected transactions will not be processed. If transaction is performed from a different device, the push notification alert will still be sent to your SecureGo registered device for approval.

To check your account balance for your Astro bill, you can do it through My Astro. Here's how:

1. Download the My Astro app or visit My Astro web
2. Login using your Astro ID
3. Go to Account > Bills
4. You will be able to see your latest account balance, make payment, download bill statements, and view payment history all in one place

Alternatively, if you only want to check your account balance, you can do so with the steps below (Note: Method below is only for account balance viewing, not payment)

Step 1:
Type ASTRO<space>BAL<space>10-Digit Astro Account No.
Example: ASTRO BAL 08XXXXXXXX

*Standard telco charges and Terms and Conditions apply

Step 2:
Send SMS to 66688

💳 Want to manage your Astro bills easily?

📱 Download the My Astro app to:
- View and download bill statements
- Check payment history
- Pay in just a few taps

Transfer of Equipment Ownership

A request to transfer the equipment’s ownership from the existing account holder to a new account holder.

Note: Transfer of Equipment Ownership is not applicable for Astro Broadband (Maxis, TIME, Allo), standalone Astro Fibre and NJOI account.

Merge of Equipment

A request from the account holder to merge the equipment from two different accounts into one account, provided the equipment must be within the same service address and registered under the same accountholder’s name.

Split of Equipment

A request from the account holder to split the equipment from one account to two different accounts and registered under the same account holder’s name.

Existing Netflix add-on customers will be notified prior to their next bill cycle via email.

Byond Box (DMT 5)

STEP 1

Switch on the power for your box and make sure that the adapter's power light is on.

STEP 2

Put the box on standby mode.

STEP 3

Press and hold the Home button on the box.

STEP 4

Wait until "boot" appear on the front panel and released.

STEP 5

New Installation Settings page will appear.

Click here for the guides to complete the setup.

Byond Box (DMT 4)

STEP 1

Switch off the power of your box and ensure the adapter�s power light is off.

STEP 2

Switch on the power of your box and ensure the adapter�s power light is on.

STEP 3

Press and hold the Ch+ and Ch- keys on the box simultaneously when the "boot" message appears on the front panel.

STEP 4

Wait until the "Clr" message appears on the front panel, then release the Ch+ and Ch- keys.

STEP 5

New Installation Settings page will appear.

Click here for the guides to complete the setup.

Byond Box (Zapper)

STEP 1

Ensure your box is on standby mode. (Red light on box's front panel).

STEP 2

Press and hold the Standby button. Wait until the LED at front panel change from red to green for 3 times, then release the button.

STEP 3

New Installation Settings page will appear.

Click here for the guides to complete the setup.

Byond Box (New Zapper)

STEP 1

Switch off the power of your box and ensure that the adapter�s power light is off.

STEP 2

Switch on the power of your box and ensure that the adapter's power light is on.

STEP 3

Keep pressing the 'Power' button until the Startup Option screen appears.

STEP 4

Press "369" on the remote control to trigger refresh box setting menu.

STEP 5

Press "OK" to proceed. The box will be refreshed to the original setting.

STEP 6

New Installation Settings page will appear.

Click here for the guides to complete the setup.

STEP 1
On your Astro remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2
Navigate to Settings.

STEP 3
Navigate to STB Diagnostics and press "OK".

STEP 4
Select General Diagnostics and press "OK".

STEP 5
General Diagnostics results will be displayed on the screen.
Scroll until observed the SW Download Status.

Yes, please visit Astro's Self Service Portal via

myastro.astro.com.my

to update your email address or mobile number.

No, there will not be any fees if you change your current Asian Favourites selection to Viu
Premium. You may also switch between Asian Favourites options once every billing cycle.

Yes, please open any marketing emails you have received from iQIYI and click on the unsubscribe link embedded in the email.

Yes, effective 1st March 2025, your Astro subscription packs that are bundled with Netflix will have a price increase:

• Netflix Standard: An increase of RM4.50 (before tax) monthly will be applied.
• Netflix Premium: An increase of RM7.28 (before tax) monthly will be applied.
• Netflix Premium (Astro one Epic): An increase of RM2.78 (before tax) monthly will be applied.

Ready to start watching on Astro Go? Simply log in using the Astro ID linked to your Astro account on a supported device. If you haven’t created your Astro ID yet, you can refer to the guide here. Then, follow the step-by-step guide below and you’ll be ready to enjoy Astro Go in no time.

Step 1: Tap on the download link to download Astro Go app on your device.

Step 2: Tap on "Get" or "Install" to download Astro Go app into your device.

Step 3: Upon downloading, launch the app on your homepage and sign in with your Astro ID.

Don’t have an Astro ID? Create one by following these steps.

Step 4: You’re all set! Enjoy a world of entertainment in the palm of your hand.

Supported mobile devices include:

- iPhones and iPads: iOS 16.0 or later.

- Android smartphones and tablets: Android 7.0 or later.

To watch on your computer or laptop, visit astrogo.astro.com.my using your web browser.

Starting 20 January 2026, all Astro customers will have the option to add on the TVBAnywhere+ app to their existing subscriptions.

If you are an Astro subscriber
Step 1: Launch the Astro Smart TV app on your Smart TV.

Step 2: Select “Log In”.

Step 3: Scan the QR code OR visit astro.com.my/tvapp and enter the code on the screen.

Step 4: Enter your Astro ID (registered email or mobile number) and password. If you do not have an Astro ID, click on “Create now”.

Step 5: Once you have successfully logged in, the Astro Smart TV app will refresh automatically, and you will be able to access it.

If you are NOT an Astro subscriber
Step 1: Launch the Astro Smart TV app on your Smart TV.

Step 2: Select “Subscribe Now”.

Step 3: Scan the QR code to visit https://www.astro.com.my/#main and explore Astro’s packs or Multiroom (Smart TV).

Step 4: Once you have successfully subscribed, kindly follow Step 1 – 5 under “If you are an Astro subscriber” to log in.

Kindly refer to the steps below to log in:

STEP 1

Click on the Disney+ app logo under the Apps rail on your Home page

STEP 2

Select Log In

STEP 3

Scan the QR code or visit the website on screen to log in

STEP 4

Key in the on-screen code to pair your TV

STEP 5

Enter your email address or mobile number associated with your Disney+ subscription

STEP 6

Select whether you want your OTP to be sent to your email address or mobile number

STEP 7

Key in your OTP

STEP 8

Review and agree to the Disney+ terms

Only applicable to first time log in to Disney+ after the app migration

STEP 9

Create your user profiles

Only applicable to first time log in to Disney+ after the app migration

STEP 10

Select your user profile on your TV screen to start watching

You will be able to enjoy all the content on the iQIYI app immediately upon successful purchase from the Astro website. You may enjoy your VIP privileges from the iQIYI app on your Ultra Box, Ulti Box, mobile devices (Android & iOS), Apple TV, Android TV, as well as on Web (www.iq.com).Please ensure that the account used to log in to the app is the same one used to purchase your iQIYI VIP subscription.

Yes, you will need to activate SecureGo again if you're on a new device.

When you activate SecureGo on a different device, you will receive an email to notify you that the device has been de-registered. 

If you suspect that someone else has gained access to your phone, contact our customer service immediately at 03-9543 3838 to unlink your Astro ID. 

Please refer to the Welcome Card inside the Plug & Play Box package and scan the QR code. You may choose to watch either the self-installation video or the Augmented Reality (AR) Installation Video to activate your Plug & Play Box. You can also download the Installation Guide from the Astro Get Started Page.

Please install and activate your Plug & Play Box within 7 days of receiving your Plug & Play Box and Astro SIM card. If you are unable to activate your Plug & Play Box within 7 days, the Plug & Play Box will be automatically activated by Astro on the 8th day.

The billing and warranty of the Plug & Play Box shall begin on the same date of which the Plug & Play Box is activated.

In the event that you have ordered more than one (1) Plug & Play Box, please refer to the Astro SIM card letter (included with the Astro SIM card delivery) to match the right Astro SIM card to the respective Plug & Play Box. Each Astro SIM card has been paired with a specific Plug & Play Box, thus the correct matching of box and SIM card is required for it to work properly.

If you are currently on the Disney+ Basic plan, your plan will automatically be renamed to Disney+ Standard. You will also be able to stream on up to 2 devices concurrently instead of 1 previously and enjoy unlimited device registrations with no change to your monthly fee.

If you are currently on the Disney+ Premium plan, you will be able to stream on up to 4 devices concurrently instead of 3 previously and enjoy unlimited device registrations with no change to your monthly fee.

For further information and support relating to the Disney+ app experience or app-related features, please visit the Disney+ Help Centre.

Your bill statement will include details of your monthly subscription charges; e.g. charges for your chosen Astro packages and Broadband service. It will also show the time period of which your first bill will cover, as well as indicate how much the total charges are and when the payment due date is.

You may cancel your ZEE5 Premium subscription here. Kindly note that we will not be able to offer a refund if you do decide to leave the ZEE5 app before your subscription period ends.

Customers will still be charged a penalty of RM 100 (exclusive of Sales and Service Tax), as per our terms and conditions, as the Astro Box & SIM Card are properties of Astro.

You will receive two SMS notifications with tracking numbers separately from the courier service, one for the Plug & Play Box and one for the Astro SIM card. Please expect these SMS notifications to be sent to you within 2-3 working days upon successful order submission (online or via retailer).

If you are an Astro subscriber
Step 1: Launch the Astro Smart TV app on your Smart TV.

Step 2: Select “Log In”.

Step 3: Scan the QR code OR visit astro.com.my/tvapp and enter the code on the screen.

Step 4: Enter your Astro ID (registered email or mobile number) and password. If you do not have an Astro ID, click on “Create now”.

Step 5: Once you have successfully logged in, the Astro Smart TV app will refresh automatically, and you will be able to access it.

If you are NOT an Astro subscriber
Step 1: Launch the Astro Smart TV app on your Smart TV.

Step 2: Select “Subscribe Now”.

Step 3: Scan the QR code to visit https://www.astro.com.my/#main and explore Astro’s packs or Multiroom (Smart TV).

Step 4: Once you have successfully subscribed, kindly follow Step 1 – 5 under “If you are an Astro subscriber” to log in.

Please use your Astro ID to log in to the Astro Fibre App. If you do not have an Astro ID, kindly follow the simple steps here to create one.

The new packs will be available starting 9 December 2024 and you can subscribe via:

• The Astro website: www.astro.com.my

• WhatsApp at 03-9543 3838 and type GET ASTRO

• Astro Customer Service Centres