STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to SETTINGS.

STEP 3

Navigate to Audio Delay and press "OK".

STEP 4

Navigate to your preferred selection and press “OK”.

The Netflix subscription through Astro is subject to a minimum commitment period of 24 months (“Netflix Minimum Subscription Period”). If you choose to discontinue or terminate the subscription before the commitment period ends, a cancellation fee (“Netflix Early Termination Fee”) will apply. Additionally, downgrading your plan will involve a Switching Fee.

You may report the incident on WhatsApp at 03-95433838 by typing PNP and our dedicated agents will attend to your matter. Please have your Airway Bill tracking numbers ready for validation.

If a replacement box/Astro SIM card is deemed necessary, a new Plug &Play Box and a new Astro SIM card will be couriered to your service address.

While this technology has its benefits, different devices at home have different reaction and response to changes in signal strength and quality, and it's almost impossible to predict if they will make good band choices due to the interaction between the devices and the Wifi router. Some smart home devices also recommend that band steering is not used due to various reasons such as needing a constant consistent connection, ability to only connect to a particular band, registration of the respective MAC address, etc..

Example:

As single SSID is used, the device may remain on a weak 5GHz network instead of switching over to stronger 2.4GHz network.

If you choose to self-install the Plug& Play Box, then no installation fee will be charged. However, there will be an activation fee (please refer to the table below)

If you choose to have an installer to install the Plug & Play Box, then an installation fee will also apply.

STEP 1

Switch OFF the power of your Ultra / Ulti box and make sure that the adapter's power light is off.

STEP 2

Switch ON the power of your Ultra / Ulti box and make sure that the adapter's power light is on.

STEP 3

Put the box on standby mode.

STEP 4

Press and hold the Home button on the box.

STEP 5

Wait until "boot" appear on the front panel and released.

STEP 6

When “boot” appears, press “Standby”, “Left “, “Up” continuously until Auto Update appear on box screen and Software Update progress on TV.

Byond Box (DMT 4)

STEP 1

Switch OFF the power of your box and make sure that the adapter's power light is off.

STEP 2

Switch ON the power of your box and make sure that the adapter's power light is on.

STEP 3

Press Standby, Ch+, Standby keys on the box simultaneously when the "boot" message appears on the box front panel.

The Software Update progress screen will appears.

The update will take 10 - 15 minutes to complete. Please be patience.

Byond Box (New Zapper)

STEP 1

Switch OFF the power of your box and make sure that the adapter's power light is off.

STEP 2

Switch ON the power of your box and make sure that the adapter's power light is on.

STEP 3

Press the standby button repeatedly after switch on the power.

STEP 4

Press "OK".

STEP 5

The Software Update progress screen will appears.

The update will take 10 - 15 minutes to complete.

Please be patience.

In general, these two bands can be differentiated with these parameters: Coverage, Channel Interference and Speed.

2.4GHz gives better coverage but lower speeds, while 5GHz provides faster internet but covers a smaller area.

Please follow the steps below:

Step 1: Fill in Transfer of Equipment Ownership Form (Part A & Part B)

Step 2: Provide an Undertaking Letter if current account holder deceased or un-contactable. (Note: Copy of death certificate is required if account holder deceased).

Step 3: Provide a copy of new applicant NRIC for Malaysian or copy of passport for non-Malaysian or copy of IMM13 Pass with at least 6 months validity for Refugee. (Note: ASTRO name should be displayed on the top left corner on both sides of the identity card copy).

Step 4: A full payment to be made on any outstanding balance for all related accounts (if any).

Step 5: Submit all documents via Feedback Form.

Step 6: Customer will expect a call from our validation team (Note: Turnaround time for transfer of equipment ownership is 3-5 working days upon receiving all complete documentation).

Note:

1. There might be a loss of transmission during the processing of transfer equipment ownership, split or merge of equipment.

2. Recorded program will be removed for PVR user.

3. A full payment to be made on any outstanding balance for all related accounts.

4. New account holder agreed to continue the remaining contract from previous owner account (if any).

5. Auto debit will be voided upon acknowledgment of transfer equipment ownership (if any).

Additional requirement for New Owner

Capping of applicant age is 21

Malaysians aged < 26 years old and Non-Malaysian - requires copy of utility bill (Phone, Internet, Water or Electricity)

The amount you're charged depends on:

• Your contract period and how long's left of your minimum term from the date your subscriptions end, calculated in months.
• Your current box type - Ultra or Ulti/Other Astro Boxes
• The packages you subscribe to, including App services such as Disney+ and Netflix

STEP 1
On your remote, press the HOME button and the menu will be displayed on top of your screen.

STEP 5
Test Connection results will be displayed on the screen.

My Astro is available on web browser and app. The app can be downloaded for free from the Google Play Store (Android 8.1 and above), Apple App Store (iOS 15 and above) or Huawei App Gallery (Android 8.1 and above).

Download My Astro app or visit the My Astro website.

For Ultra and/or Ulti box users, My Astro app is now added to the Top Menu so you can easily access it to manage or update your account. You may find it in the Top Menu, located next to Settings. Please refer to the image below to see what it looks like:

To allow customers to decide on their WiFi connection arrangement based on their preference upon being advised by the installer on-site.

User to manually connect their devices to different WiFi bands based on their usage and preference.

The Personal Video Recorder (PVR) is Astro's High Definition (HD)decoder which comes with a recording function and can be connected to Wi-Fi to access videos on demand. The PVR comes with the following features:

HIGH DEFINITION (HD):High Definition offers greater detail than Standard Definition including vibrant colour and multi-dimensional audio.

CONTROL LIVE TV: Record, Pause, Play & Rewind your favourite TV programmes at any moment. The PVR comes with storage capacity of 500GB (200 hours of HD recording)

ON DEMAND: Experience the new way of watching Astro. Gain access to a library of up to 50,000 On Demand titles that you can pick and watch instantly.

Once the e-invoicing is activated, you cannot change your bill delivery method. If you do, your e-invoice will be automatically deactivated.

If you see this message, it means the maximum number of devices currently streaming on your Astro account has been exceeded.
Please perform the following checks and troubleshooting steps:

1. Stop Streaming on Other Devices

• Check if Astro is currently being streamed on other devices linked to your account.
• Close the Astro app or stop playback on any unused devices.

2. Wait a Few Minutes

• If a streaming session was recently ended, it may take a few minutes for the system to update.

3. Try Again

• Return to your device and attempt to stream the content again.

4. Check Your Device Usage

• Go to www.astrogo.com.my or open the Astro GO app.
• Log in using your Astro ID and password.
• Review the list of registered devices.
• Remove a device that you no longer use.
• Return to your new device and try signing in again

If you are unable to remove a device or continue to see the error message, proceed to submit report via WhatsApp or Feedback Form and provide:

• Astro ID use
• Smart TV model
• OS version
• Error reported on device

This will help our support team investigate and assist you further.

Note: Please be aware that only one Smart TV device is allowed per account at any point in time.

The Multiroom (Smart TV) will mirror the subscription entitlement as per your primary subscription. However, radio channels and 3rd party apps such as Netflix, Disney+ are not available for consumption via Multiroom (Smart TV).

If your submission was unsuccessful, you can reapply through the My Astro website or app. We strongly advise you to provide your TIN number to facilitate the e-invoice issuance process. Alternatively, you can reach out to us via Astro Help & Support for assistance.

This exercise currently only affects person-to-person SMS with URL links. However, the blocking of SMS sent by businesses via short codes such as 6XXXX, 3XXXX, 2XXXX and 1XXXX will be implemented at a later phase. In response to this government initiative, Astro customers will no longer receive SMS bills effective 1 August 2023. This change will be carried out in phases.

Please switch your preferred Bill Delivery Method using our self-service portals via My Astro Web or My Astro app. Please click here to download the app on your mobile device or login to My Astro Web.

Please ensure that you are using the correct ID for eKYC submission.

For Malaysians :

1. Please ensure you are using MyKad or MyTentera.

2. Capture the front and back of your ID.

3. Ensure that there is no glare when capturing the photo.

4. Ensure that are capturing it in a bright room to have the highest picture quality.

5. Please do not cover your ID when capturing it, as it may impact the OCR Optical Character Recognition accuracy.

For Malaysian Permanent Resident and Other Nationality :

1. Please use Passport only.

2. Please capture your whole passport, which has your personal information on it and your signature.

3. Ensure that there is no glare when capturing the photo.

4. Please do not cover your ID with your when capturing it, as it may impact the OCR Optical Character Recognition accuracy.

You can watch Disney+ through any of the following methods:

a. Astro Ultra and Ulti Box by launching the Disney+ app under the Apps rail on your Home page.

b. Personal devices (e.g. mobile phones, tablets and Smart TVs) by downloading the Disney+ app or visiting the Disney+ website.

You will need to log in using the credentials created during activation.

Yes, the iQIYI app is accessible globally. However, the content of the app might differ depending on the country which will be tailored based on local content rights and market preferences.

If you are unable to scan the QR code displayed on your Smart TV, please use the alternative sign-in method:

1. On your mobile phone or computer, open a web browser and visit: https://astro.com.my/tvapp

Note: Ensure your mobile device/computer has an active internet connection and that you enter the code exactly as shown on the TV screen.

2. Enter the sign-in code displayed on your TV screen.

Landing screen on Smart TV

Landing screen on the Smart phone

3. Log in using your registered Astro ID.

4. Once successfully logged in, your Smart TV should automatically sign in and you can continue using the Astro Smart TV app.

If you are still having issues, proceed to submit report via WhatsApp or Feedback Form and provide:

• Astro ID use
• Smart TV model
• OS version
• Error reported on device

This will help our support team investigate and assist you further.

For more information on the product including offers and setup, visitproduct.astro.com.my/multiroom.

Astro subscribers will have the freedom to subscribe to Netflix via Astro, or they may also choose to continue subscribing via Netflix directly on their own.

Step 1: User press ‘YELLOW’ button to change mobile number.

Step 2: Scan the QR Code on your Ultra Box/Ulti Box using your mobile phone.

Step 3: Update your mobile number.

Step 4: Click on ‘Mobile number updated’ upon mobile number update completion and continue with OTP validation again.

Step 5: Once the mobile number has been successfully updated, please continue with the activation process.

For more information you may visit

https://www.hasil.gov.my/en/e-invoice/

OR call the IRBM help desk line at 03-8682 8000 OR email them at [email protected]

[email protected]

.

1. Please use a LAN ethernet cable and connect your computer/laptop to the back of the Maxis Router.

2. You may open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox, etc.

3. On the address bar, please go to http://192.168.1.254 and the page below will appear.

The default login of the router as below. If you have done a configuration on your router and changed your password previously, please use the password you have previously set.

Username: administrator

Password: Router S/N (Available on the sticker at the back of the router)

4. Once you have successfully login, the router's web-based setup page will appear.

5. From the left menu, select WIRELESS to access the screen below.

6. You may change the Network Name (SSID) and the Password to follow your preferences, then scroll to bottom and click "Apply" for the changes to take place.

7. A warning box will popup, click "OK" for the changes to take place and reconnect to the new wireless name with the new password once completed.

8. Please wait until the connection reestablish.

No. An Astro-billed Disney+ subscription cannot be transferred to a Disney+-billed subscription.

If you choose to subscribe directly with Disney+, your subscription and billing will be managed by Disney+. We recommend reviewing your current Disney+ subscription arrangement before signing up to ensure it best meets your needs.

Please note that subscribing directly through Disney+ while maintaining an active Astro-billed Disney+ subscription may result in you having multiple Disney+ subscriptions and being charged separately for each subscription.

The "coming soon" label on some streaming apps on your TV and the "Apps" page of Astro's website allows our customers to stay on top of new launches as they happen! Stay tuned for these upcoming streaming apps so you can access even more content that you love from across the world.

After service termination of your Astro Fibre service, we will call you via your registered mobile number (up to 3 times over 3 days) to schedule an arranged pick-up by one of our Astro agents. Our agent will then come to your doorstep, dismantle the devices for you and retrieve them.

Note: Upon termination of your service, customers are required to return their old Astro Fibre devices to Astro. Failure to do so will incur a fee of RM200 (WiFi Router), RM500 (Fibre Modem) and RM200 (Mesh WiFi Unit - if applicable) for each unit. All prices stated are exclusive of Govt. tax.

a) Launch the app on your new Smart TV device and follow the instructions on screen to log in.

b) You will receive a notification on your mobile that the maximum no. of registered devices has been reached and see the list of registered devices.

c) Choose the old Smart TV to be removed and your new Smart TV will be added automatically.

STEP 1

Identify your remote control:

a) Remote control with Astro logo at the bottom of the remote, proceed to STEP 2.

b) Remote control with Astro logo at the top of the remote, proceed to STEP 4

STEP 2 (Astro Logo at the bottom of the Remote)

On your remote, press the “set tv” button and set tv instructions will be displayed on top of your screen:

STEP 3

Follow the steps appear on the TV screen to sync your Astro remote and complete the setup.

STEP 4 (Astro Logo atthe top of the Remote)

Press and hold “tv input” key on bottom left of the remote for 3 seconds until the LED blinks twice.

STEP 5

Enter the 2-digit TV Code of your TV Brand and the LED will blink twice:

STEP 6

Try out the TV controls (TV Standby or adjust Volume) to check if they are working correctly.

STEP 7

Press ok and wait for the LED to blink twice to save the settings.

You may view your latest tax invoice or bill via any of the platform listed below:

A. My Astro app

1. Download the My Astro app

2. Login using your Astro ID

3. Go to Account > Bills

4. You will be able to see your outstanding bill amount, make payment, download bill statements, and view payment history all in one app.

B. My Astro web

Alternatively, you can use the web version
C. IVR

1. Call +603-95433838

2. Press 1 for Account Related Queries

3. Input your 10-digit Astro Account no. or 12-digit MyKad no.

4. Press 2 for Payment and Billing

5. Press 1 to receive an SMS with your bill balance and a link to pay online

Note: You will not be able to download your bills or view payment history via Astro Quick Pay. For a better experience to manage your bills (To download bills or view your payment history), you can download the My Astro app.

💳 Want to manage your Astro bills easily?

📱 Download the My Astro app to:
- View and download bill statements
- Check payment history
- Pay in just a few taps

Yes, your primary box must be on Ultra/Ulti Box to get 2 months of access to Prime Video at no additional charge.
Worry not, if your primary box is the older box, contact us via WhatsApp by typing “Hi” at 03-9543 3838 to upgrade the box to Ultra/Ulti box within 24 April 2025 – 23 June 2025 to get the access.

To request for a move, you may choose to:

(The fastest way) Self-serve by logging in to My Astro and follow the steps below:

1. Download the My Astro app or use the web version of My Astro
2. Login using your Astro ID
3. Go to Account > Profile > Address
4. Tap on the edit icon on 'Service address'
5. Verify your identity via SecureGo or OTP
6. Fill in your new address and confirm your relocation
7. A support ticket will be created and we will be in touch

OR

Submit your feedback via below link: https://support.astro.com.my/feedback-form

1: Choose Feedback Type

• Type: Technical issues
• Issue: I want to enquire about installation/ relocation

2: Fill in the form and click “Submit” support ticket.

STEP 1
In the Kids Profile, press the Home button on your remote and the home menu will be displayed.

STEP 2
Navigate to Profile.

STEP 3
The Profile Selection Screen will be displayed.

STEP 4
Choose an Adult Profile.

STEP 5
Switching from a Kids to an Adult Profile will require you to enter a 4-digit PIN.
Please enter your PIN to proceed. If you have not set up your PIN, the default code is 0000.

STEP 6
After entering the PIN, you will be able to enter the Adult Profile.

No, the quality of your video depends on the speed and reliability of your internet.

From 1st July 2023 onwards, Astro will ONLY accept cheques deposited at Public Bank Berhad.

To simplify your monthly payments, here are some recommended alternatives you can look into.

• Auto-Debit
• Online Banking
• WhatsApp
• JomPAY
• Astro Quick Pay

To find out more on how you can make your payments via these channels, kindly visit here.

Should you choose to continue with cheque payment, do ensure that you follow these steps below.

Step 1: Fill in the cheque

Step 2: Ensure that your 10-digit Astro account number is accurately written at the back of the cheque

Step 3: Go to your nearest Public Bank

Step 4: Locate the Cheque Deposit Machine

Step 5: Select “Bill Payment” on the screen

Step 6: Select “Astro”

Step 7: Drop your cheque in

Step 8: Collect your receipt

No, the Netflix 24-month ala-carte plans do not include an auto-renewal contract. After your contract has expired, you can continue to enjoy the discounted price as long as you maintain your Netflix subscription with Astro.

You do not need to request for a reconnection as our system will detect your payment and process it immediately, provided you paid via a real-time payment channel.

Click here for a full list of our payment channels.

Yes, you can. Once you update your email address, your next e‑bill will be delivered to the new email address you’ve provided. It’s important to make sure your email address is accurate so you can continue receiving your monthly e‑bill without interruption.

Click here for a step‑by‑step guide on how to update your email address.

You would need your 10-digit account number and your email address.

STEP 1

Switch off the power for your box and make sure that the adapter's power light is off.

STEP 2

Locate the SIM card at the left side and gently pull it out.

STEP 3

Wipe the SIM card's gold chip clean using a dry soft cloth.

STEP 4

Make sure the gold chip is facing down and reinsert it all the way in.

STEP 5

Switch on the power for your box and make sure that the adapter's power light is on.

Please wait for 5 minutes.

STEP 6

Turn on your Ultra Box. You should no longer be experiencing this problem.

If issue persist, please submit the issue in our Feedback Form with the error details and provide sim card number for assistance.

STEP 1
On your remote, press the Home button and the Home Page will be displayed on your screen.

STEP 2
Navigate to Profile.

STEP 3
The Profile Selection Screen will be displayed.

STEP 4
Navigate to Edit Profile.

STEP 5
Choose a profile to edit.

STEP 6
Navigate to Delete Profile.

STEP 7
Click Confirm to delete your profile.

STEP 8
The deleted profile will be removed from the Profile Selection Screen.

For multi-frequency customers, RM10.00 is charged per physical bill generated.

Astro X3 is a new way to become an Astro customer, designed for the big screen. It allows customers to sign up instantly and start streaming Astro directly on their Smart TV—without the need for a set-top box, satellite dish or installation.

Astro GO, on the other hand, is a companion app that comes with every Astro subscription. It extends the experience to smaller screens, enabling customers to watch their content on smartphones, tablets and PCs anytime, anywhere.

For Platinum Pack and Multiroom Smart TV customers, Astro GO+ will be automatically added to your subscription.

For customers that would like to subscribe to Multiroom with a box installation,

(i) customers on the old packages (example Family Pack, Starter Pack, Value Pack, Super Pack or Super Pack Plus) will have to subscribe to our new packages first by sending "Switch" to 03-9543 3838 via WhatsApp;

(ii) customers on the new Astro packages can subscribe by visiting product.astro.com.my/multiroom or WhatsApp "Hi" to 03-9543 3838.

STEP 1

Choose your language preferences for both Menu Language and Info Language. Then, press "OK".

STEP 2

Select you box operating mode and press "OK".

STEP 3

Select the resolution supports by your TV and press "OK".

STEP 4

Press "OK" to proceed to the next screen.

STEP 5

Please select the LNB type and press "OK".

STEP 6

Select this as the Entry Point and press "OK" to confirm your selection.

STEP 7

Signal reading results for Tuner 1 and Tuner 2 screen will be displayed. Then, press "OK" to proceed to next screen.

STEP 8

Select Yes, continue and press "OK" to connect to Wi-Fi network.

STEP 9

Please wait while the box scanning for the available Wi-Fi network.

STEP 10

Select your Wi-Fi network and navigate to "Connect".

STEP 11

Please enter the password to connect to your network and press "OK".

STEP 12

You are successfully connected when this screen appears.