STEP 1
Switch off the power for your box and make sure that the adapter's power light is off.

STEP 2
Locate the Smartcard at the front or right side and gently pull it out make sure that the adapter's power light is off.

STEP 3
Wipe the Smartcard's gold chip clean using a dry soft cloth.

STEP 4
Make sure the gold chip is facing upwards and reinsert it all the way in.

STEP 5
Switch on the power for your box and make sure that the adapter's power light is on. Please wait for 5 minutes.

STEP 6
Turn on your box. You should no longer be experiencing this problem.
If issue persist, please submit the issue in our Feedback Form and attach a picture of your General tab of the STB Diagnostics for assistance.

Watch this video or follow below steps to fix your WiFi connectivity issue

Skyworth RG21

1. Please connect your computer or laptop to your Astro Fibre router using WiFi or LAN cable. Your LAN cable must be connected from the yellow port of Astro Fibre router (Any available port).
2. Once connected, open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox and etc.
3. On the address bar, type http://192.168.100.254 and below page will appear.

Login using your username and password if you have changed the router login setting. Otherwise, your default router login is as per below.

Username: user
Password: user

4. Once you have successfully logged in, the router's web-based setup page will appear.

5. At the top of the page, click WLAN to configure the WiFi parameters.

6. To change the channel on 2.4G, click the drop-down arrow for Channel, then select your desired channel.

7. Then, click "Save & Apply" for the changes to take place.

8. You may make the same changes for 5G by click the drop-down arrow for Channel, then select your desired channel.

9. Then, click "Save & Apply" for the changes to take place.

Please ensure that you are using the correct ID for eKYC submission.

For Malaysians :

1. Please ensure you are using MyKad or MyTentera.

2. Capture the front and back of your ID.

3. Ensure that there is no glare when capturing the photo.

4. Ensure that are capturing it in a bright room to have the highest picture quality.

5. Please do not cover your ID when capturing it, as it may impact the OCR Optical Character Recognition accuracy.

For Malaysian Permanent Resident and Other Nationality :

1. Please use Passport only.

2. Please capture your whole passport, which has your personal information on it and your signature.

3. Ensure that there is no glare when capturing the photo.

4. Please do not cover your ID with your when capturing it, as it may impact the OCR Optical Character Recognition accuracy.

Returning your Astro box & Smart card/SIM card is a very simple process.

For existing Ultra Box or Ulti Box user, call 03-9543 3838 to schedule our courier partner to come pick up the box or drop them off at the closest Astro Service Centre or Exclusive Partner near you. Click here to find a Customer Service Centre (CSC) or Astro Exclusive Partner (AEP) near you.

For any unreturned Ultra Box or Ulti Box, a box fee of RM100 may be charged to your account.

For all other boxes, please recycle your box at a registered collection center that will properly manage the boxes in an environmentally friendly way. Click here to find a registered collection center near you.

Mesh WiFi technology greatly improves the WiFi network coverage within your home and virtually eliminates all WiFi “dead spots”. However, like all technologies there are limitations that you should be aware of.

The pairing of Mesh unit to the WiFi router is automatically handled between the WiFi router and the Mesh unit after it calculates its current position in relation to the WiFi router and surrounding Mesh unit (if available) already connected to the WiFi router.

If you are self-installing the mesh at your house, it is advisable for you to always pair the Mesh unit(s) with the WiFi router only regardless of how many Mesh unit available at your house.

Please note that if you have a Mesh connected to another Mesh, the expected performance of the WiFi speed will not perform as optimally as when compared to a Mesh connected directly to the WiFi router. Adding more points (also referred as Number of hops) in between your device to the WiFi router which will cause a reduction in bandwidth and add latency.

Download the iQIYI app > Select "Profile" > Click on "Log in with Astro ID" > Click on "Do not have an Astro ID? Click here".

Yes. Charges for your Disney+ subscription will begin once the subscription has been successfully added to your Astro account.

If you see this message, it means your Astro account has reached the maximum number of devices allowed for registration.
Please perform the following checks and troubleshooting steps:

1. Manage Your Registered Devices

• Go to www.astrogo.com.my or open the Astro GO app.
• Log in using your Astro ID and password.
• Review the list of registered devices.
• Remove a device that you no longer use.
• Return to your new device and try signing in again.

If you are unable to remove a device or continue to see the error message, proceed to submit report via WhatsApp or Feedback Form and provide:

• Astro ID use
• Smart TV model
• OS version
• Error reported on device

This will help our support team investigate and assist you further.

Note: Please be aware that only one Smart TV device is allowed per account at any point in time.

1. Launch the Simply South icon on your Ultra and Ulti box
2. Click on “Log in” button via top menu in Simply South app
3. Follow the instructions displayed on your TV screen

Each Astro customer can subscribe to a maximum of one (1) Multiroom (Smart TV) subscription. If you need additional Multiroom access, you may subscribe to Multiroom (Astro Box). All subscriptions must be used within the same location as the main subscription.

You will receive two SMS notifications with tracking numbers separately from the courier service, one for the Plug & Play Box and one for the Astro SIM card. Please expect these SMS notifications to be sent to you within 2-3 working days upon successful order submission (online or via retailer).

STEP 1

Press any button on your Astro remote.

INDICATOR: LED blinking 3 times / NO LED blink

SOLUTION: Replace new battery

STEP 2

Check if you can change channel using your Astro remote control.

If issue remain after the battery replacement, try changing the channel manually directly from box front panel (If any).

If it's working, you might need to replace your Astro remote.

This might be due to a faulty Astro remote.

You may purchase it directly from Astro Exclusive Partners.

If confirm no issue with remote control, please refer to Decoder Hang at Channel troubleshooting steps here.

Yes, you can change your subtitle and dubbing for your contents, however, the dubbing may differ from content to content.

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Settings.

STEP 3

Navigate to Subtitles and press "OK".

STEP 4

Navigate to your preferred selection and press "OK".

Ready to start watching on Astro Go? Simply log in using the Astro ID linked to your Astro account on a supported device. If you haven’t created your Astro ID yet, you can refer to the guide here. Then, follow the step-by-step guide below and you’ll be ready to enjoy Astro Go in no time.

Step 1: Tap on the download link to download Astro Go app on your device.

Step 2: Tap on "Get" or "Install" to download Astro Go app into your device.

Step 3: Upon downloading, launch the app on your homepage and sign in with your Astro ID.

Don’t have an Astro ID? Create one by following these steps.

Step 4: You’re all set! Enjoy a world of entertainment in the palm of your hand.

Supported mobile devices include:

- iPhones and iPads: iOS 16.0 or later.

- Android smartphones and tablets: Android 7.0 or later.

To watch on your computer or laptop, visit astrogo.astro.com.my using your web browser.

You will receive an SMS from us informing you of the receipt of your Astro Box. However, if you wish to track the delivery of your Astro Box, you can use the tracking number available on the consignment note.

Upgrade to Sun NXT Premium via www.astro.com.my/sunnxt or the MyAstro app. For further assistance, contact our customer service at 03-9543 3838.

If you require assistance with the app:
1. Submit an in-app feedback form via the ZEE5 website: https://www.zee5.com/contactUs/

If you have issues on billing and entitlement, you may contact Astro’s Customer Service by:
1. Submitting a feedback form here: www.astro.com.my/contactus/form; or
2. Reaching to us via WhatsApp by typing “Hi” at 03-95433838 for assistance

Yes, effective 1st March 2025, your Astro subscription packs that are bundled with Netflix will have a price increase:

• Netflix Standard: An increase of RM4.50 (before tax) monthly will be applied.
• Netflix Premium: An increase of RM7.28 (before tax) monthly will be applied.
• Netflix Premium (Astro one Epic): An increase of RM2.78 (before tax) monthly will be applied.

1. Ensure power cable is connected tightly.

2. Try to use another power socket / power source to eliminate faulty power sockets/power sources which could cause the issue.

3. If the issue persists, submit your feedback form for further assistance.

STEP 1

Choose your language preferences for both Menu Language and Info Language. Then, press "OK".

STEP 2

Select you box operating mode and press "OK".

STEP 3

Select the resolution supports by your TV and press "OK".

STEP 4

Press "OK" to proceed to the next screen.

STEP 5

Please select the LNB type and press "OK".

STEP 6

Select this as the Entry Point and press "OK" to confirm your selection.

STEP 7

Signal reading results for Tuner 1 and Tuner 2 screen will be displayed. Then, press "OK" to proceed to next screen.

STEP 8

Select Yes, continue and press "OK" to connect to Wi-Fi network.

STEP 9

Please wait while the box scanning for the available Wi-Fi network.

STEP 10

Select your Wi-Fi network and navigate to "Connect".

STEP 11

Please enter the password to connect to your network and press "OK".

STEP 12

You are successfully connected when this screen appears.

If you already have a WeTV subscription, you are allowed to subscribe to WeTV VIP with the same mobile number via Astro; however, your existing account will continue to run until you manually cancel it. With two active subscriptions with the same mobile number, your subscriptions will be added on top of your existing account and you will be charged twice on two separate accounts.

E‑Invoicing is a fully digital version of your invoice that is created and shared electronically based on the Inland Revenue Board of Malaysia’s (IRBM) national e‑Invoicing requirement. Instead of using paper or manual documents, everything is processed digitally for a smoother and more secure billing experience.

There are no changes to your charges, but the way your invoice is generated becomes more efficient and in alignment with national tax requirements.

Yes, the monthly subscription fee will be prorated into your Astro bill.

Payment for Astro services will not increase. However, the Service Tax applicable will be increased from 6% to 8% and this will result in an increase in the total amount payable.

You can enjoy Prime Video benefits on Prime Video website and/or mobile app for 2 months once you have activated your Prime Video access anytime between 24 April 2025 – 23 June 2025.

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Guide.

STEP 3

Select the channel you would like to add to favourite list and press "OK".

STEP 4

Select "Add to Favourites" and press "OK".

STEP 5

You are successfully added the channel to favourite list when this screen appears.

STEP 6

Your selected channel will have a heart tagging after added as favourite.

For customers that would like to subscribe to Multiroom with a box installation,

(i) customers on the old packages (example Family Pack, Starter Pack, Value Pack, Super Pack or Super Pack Plus) will have to subscribe to our new packages first by sending "Switch" to 03-9543 3838 via WhatsApp;

(ii) customers on the new Astro packages can subscribe by visiting product.astro.com.my/multiroom or WhatsApp "Hi" to 03-9543 3838.

The Multiroom (Smart TV) will mirror the subscription entitlement as per your primary subscription. However, radio channels and 3rd party apps such as Netflix, Disney+ are not available for consumption via Multiroom (Smart TV).

Yes, your information will still be available in the HBO Max app if you choose to resubscribe directly to HBO Max through

www.hbomax.com

. To keep your preferences and account settings, ensure you use the same email address when you resubscribe.

You will still need to authorise the transaction from your SecureGo registered device. 

Step 1: On another device, perform the transaction via My Astro app 

Step 2: Tap on the push notification you receive on your SecureGo registered device 

Step 3: Tap Approve or Reject to authorise the transaction, and you're done! 

The Ultra/Ulti Plug & Play Box comes with a one-year box hardware warranty.

For self-installation, there is a warranty seal at the bottom of the Ultra/Ulti Plug & Play Box, which must not be removed or tampered with as this would void the one-year Ultra/Ulti box hardware warranty.

Starting

12 December 2023

, users must log in using their

registered email address

,

mobile number

, or a

social account

(Facebook, Google, or Apple) to access any of Astro's digital platforms, including

My Astro

,

Astro GO

, and

Astro's official website

.

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Settings.

STEP 3

Navigate to Remote Control Settings and press "OK".

STEP 4

Follow the steps appear on the screen to sync your Astro remote.

Please ensure you:

a. Have your original identification card “MyKad” (Front & Back) with you (Malaysian).

b. Have your original Passport & Visa with you (Non-Malaysian).

c. Are in a brightly lit environment

Yes, you will need to activate SecureGo again.

Astro X3 allow up to 2 concurrent streams at the same time, shared across your registered devices. If you’d like to enjoy more simultaneous viewing, you can add GO+ to increase to up to 4 concurrent streams for RM5.99 per month (exclusive of SST). While streaming is flexible across devices, only one Smart TV can be used at a time. The remaining streams can be used on mobile or other supported devices via Astro GO.

Astro sends regular payment reminders to customers via SMS until their current charges have been paid. However, we encourage customers to pay their bill as soon as possible to avoid disconnection of Astro service. Please reach out to us here if you require more information about payment reminders or to change your contact details.

Viu is an on-demand video streaming service with over 4,500 hours of movies, TV shows and
music. With Viu, you can stream premium Asian content from Korea, Japan, Thailand, Hong
Kong, China and Taiwan – with English, Malay & Chinese subtitles (for selected titles) and more,
all on your big screen TV via the Ultra/Ulti Box or on-the-go right at your fingertips with the Viu
mobile app

If you would like more information or to provide feedback on Astro Rewards, kindly reach out to us at 03 9543 3838 or visit one of our Astro service centres.

Yes, eKYC verification is mandatory. In addition, this verification process helps to reduce manual handling of customer's personal information and secure against unauthorised usage.

Yes, customers may need to provide additional documents such as bank-in slips or payment receipts. For refund requests due to wrong payment, it is mandatory to provide proof of payment or a bank statement that shows the transaction and bank account details

No, you are not allowed to change your due date or maintain your old due date. Your current due date is as per Astro Policy. Therefore, to ensure that you continue to enjoy uninterrupted services, we advise you to observe this change in due date from Day 30 to Day 25 and proceed with the necessary payment.

Yes, you are eligible for the 2-month access. However, you will need to activate and link your amazon account. Please activate and access Amazon Prime as the insturfctions below.

Step 1: Visit https://product.astro.com.my/apps/primevideo and click on "Get or activate Prime Now" and log in using your Astro ID and follow the on-screen steps.

Step 2: Once redirected to the Prime Video app, sign in to your Amazon Prime account using mobile number or email address.

Step 3: Launch Prime Video from application rail on your Ultra Box/Ulti Box by clicking on “Red Button” in your remote.

Step 4: Click on the “Sign in” button.

Step 5: Pair your Ultra Box/Ulti Box by scanning the QR Code.

Step 6: Enter your credentials on either a mobile browser or open the Prime Video app on your mobile device, and then click "Allow".

Step 7: Enjoy!

Yes, you may still watch Love Nature on CH550 and Sports content on CH810–CH833, which offer the same content and programmes in HD resolution.

Kindly note that channels CH810–CH833 are only available to customers with Sports entitlement in their subscribed TV Pack.

The WiFi SSID and password of the Mesh unit will be automatically synchronized to the WiFi router. Hence, there is no need to configure the WiFi parameters.

*WiFi SSID (Service Set Identifier) is the name of your wireless network, also known as Network ID. It is viewable to anyone with a wireless device within reachable distance of your network.

Yes, you can return the Astro Box & Smart Card/SIM Card even after being charged for the box fee. After successfully returning the box, Astro will proceed to refund the box fee within 30 days from the confirmation date of the returned items to our Astro warehouse.

1. Please use a LAN ethernet cable and connect your computer/laptop to the back of the Maxis Router.

2. You may open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox, etc.

3. On the address bar, please go to http://192.168.1.254 and the page below will appear.

The default login of the router as below. If you have done a configuration on your router and changed your password previously, please use the password you have previously set.

Username: administrator

Password: Router S/N (Available on the sticker at the back of the router)

4. Once you have successfully login, the router's web-based setup page will appear.

5. At the top of the page, click Wi-Fi Configuration to configure the Wi-Fi parameters.

6. You may change the Wi-Fi Name and the Password to follow your preferences, then click "Save" for the changes to take place.

Please reconnect to the new wireless name with the new password once completed.

If the Astro Smart TV app crashes on your Smart TV, please follow the steps below:

1. Clear the App Cache

• Clear the Astro Smart TV application cache on your Smart TV.
• Once completed, relaunch the Astro Smart TV app.
• Check if the issue has been resolved.

2. Reinstall the Astro Smart TV App

• Uninstall the Astro Smart TV app from your Smart TV.
• Download and install the latest version of the Astro app from your TV's app store.
• Launch the app after installation.
• Try playing content again to verify whether the issue has been resolved.

If the app continues to crash after completing the above steps, proceed to submit report via WhatsApp or Feedback Form and provide:

• Astro ID use
• Smart TV model
• OS version
• Details of the content being played when the crash occurs

This will help our support team investigate and assist you further.

1. Open/Download the My Astro app or visit My Astro web.

2. Login with your Astro ID.

3. Go to Add on Apps.

4. Under Apps categoty, tap Show more to show the full list of available Apps.

5. Select the require App to add-on and tap 'Proceed'.

6. Review order, select agreed and tap on 'Confirm order'.

7. Select 'Approve' to edit add-ons.

8. A confirmation order will be displayed and click 'Done' to close.