Please ensure that you have subscribed to the mentioned channel.
If you're subscribed to this channel, follow below steps.

STEP 1
You need to refresh the signal on your box.
Refer to Refresh signal of your box guide.

STEP 2
If issue persist after 30 minutes, proceed to submit report via WhatsApp or Feedback Form.

The eKYC link is only valid for 3 days to complete the eKYC verification process. You will be required to submit a fresh Astro account application.

In support of the environment, customers are encouraged to opt for bill statements delivered for free via email or SMS for better savings as the Paper Bill Charge will be revised from RM7.00 to RM10.00 per bill/month, starting 1st August 2022. The Paper Bill Charge will be waived for customers who opt for e-Billing as their preferred bill delivery method.

Refund fee is subject to your processing bank. However, Astro did not impose refund processing fee.

Intermittent internet connection using LAN cable

Looks like there is something wrong with your service connection.

Please run a Ping Test, Traceroute Test and attach the picture or screenshot of both test results in the Feedback Form below, in order for us to provide further assistances.

Please ensure to attach the required screenshot(s) in ONE file (i.e. Microsoft Word document, PDF, Image file) before submitting the form.

Intermittent internet connection using WiFi

1. Router Positioning
   • Most people underestimate the importance of picking a good spot for a Wi-Fi router. Even a small shift in positioning could end up being the difference between day and night.
   • High vs. Low
     • Put the router as high up as possible to extend the broadcasting range of the radio waves. This also helps clear the router of possible interferences.
   • Concrete & Metals
     • Make sure your router isn't blocked by any other objects, especially devices that are electronic. Also, avoid placing your router in your basement as this area is usually enclosed by a lot of concrete, which can be almost impossible for WiFi signals to penetrate.
   • Distance to Router
     • The further away from your router you get, the weaker the Wi-Fi signal. Therefore, the best option is to place your router as close to your devices as possible, but this is only practical if you have one main area where you tend to use your devices.
     • Otherwise, you should place your router near the center of your home. After all, WiFi broadcasts in 360 degrees, so it doesn't make sense to put it at one end of the house.
2. Wireless Interference & Noise
   • You've probably never noticed but there are wireless signals all around you wherever you go and they're passing through you all the time. From where? Electronic devices, WiFi routers, satellites, cell towers, and more.
   • Although WiFi is supposed to be on a different frequency than most of these devices, the amount of radio noise can still cause interference. Some common causes of interference include:
     1. Microwaves
     2. Bluetooth Devices
     3. Cordless Phone
3. Surrounding Wi-Fi signals
   • A truth of the modern world is that every household has their own WiFi network, which can cause issues with channel overlap. This can be somewhat problematic in a townhouse, but is especially problematic in housing complexes and apartments where there can be many routers within close proximity.
   • Which is why it's important that you pick a good channel in your router settings. Modern routers can choose channels for you automatically, but sometimes it's better to investigate and find the best channel yourself.
4. Usage
   • More likely, however, is that the people on your network such as friends, roommates, or family members are participating in bandwidth-heavy activities like gaming and streaming Ultrabox/ Netflix.
   • Fortunately, if this is the case, you can prioritize your own network traffic by enabling Quality of Service in your router settings.

If the problem persists, please run a Ping Test, Traceroute Test and attach the picture or screenshot of both test results in the Feedback Form below, in order for us to provide further assistances.

Please make sure to attach the required screenshot(s) in ONE file (i.e. Microsoft Word document, PDF, Image file) before submitting the form.

Quick Info
A Ping Test shows how long it takes for packets to reach host.
A Traceroute Test traces the route of packets to destination host from our server.

If you are currently on the Disney+ Basic plan, your plan will automatically be renamed to Disney+ Standard. You will also be able to stream on up to 2 devices concurrently instead of 1 previously and enjoy unlimited device registrations with no change to your monthly fee.

If you are currently on the Disney+ Premium plan, you will be able to stream on up to 4 devices concurrently instead of 3 previously and enjoy unlimited device registrations with no change to your monthly fee.

For further information and support relating to the Disney+ app experience or app-related features, please visit the Disney+ Help Centre.

STEP 1

Switch OFF the power of your Ultra / Ulti box and make sure that the adapter's power light is off.

STEP 2

Switch ON the power of your Ultra / Ulti box and make sure that the adapter's power light is on.

STEP 3

On your remote control, press the standby button repeatedly until the Startup Options appear on TV.

STEP 4

Press "1".

STEP 5

Press "1" if your box setup under Satellite Mode.
Press "2" if your box setup under Plug and Play Mode.

STEP 6

The Software Update progress screen will appears.

The update will take 10 - 15 minutes to complete.

Please be patience.

STEP 1: Confirm TV Input Source
Use your TV remote to select the correct input:

HDMI for HDMI cable users.
AV/Video for RCA cable users.

Cycle through inputs (HDMI1, HDMI2, AV1, etc.) until the Astro box screen appears.

STEP 2: Check Cable Connections

HDMI Users:
Ensure HDMI cable is firmly connected to both the Astro box and TV. Try a different HDMI port or cable if needed.

RCA Users:
Match red (audio right), white (audio left), and yellow (video) cables to the correct ports. Ensure cables are not loose or damaged.

STEP 3: Power Cycle the Astro Box

Turn off the Astro box.
Unplug the power cable from the wall socket.
Wait 10 seconds, plug it back in, and turn it on.

STEP 4: Test with Alternative Port or Cable

Try a different HDMI or AV port on your TV. Use a different HDMI or RCA cable to rule out faults.

STEP 5: Contact Astro Support

If no improvement seen, please submit the issue in our Feedback Form and attach a picture of your smart card number for assistance or WhatsApp us at 03-95433838.

If you choose to opt out of SecureGo, please note that your authorisation method will not switch back to SMS OTP and transactions cannot be completed without SecureGo. You will receive a prompt to re-register for SecureGo when you need to authorise a transaction again. 

To de-register, follow these steps: 

Launch the My Astro app, tap the gear icon on top right of the screen to go to Manage. Under Settings, tap on SecureGo.

Step 1: Under SecureGo, tap the toggle to turn off/de-register 

Step 2: Tap Yes and your SecureGo will be de-registered.

STEP 1
On your remote, press the Home button and the home menu will be displayed on your screen.

STEP 2
Navigate to Profile.

STEP 3 The Profile Selection Screen will be displayed.

STEP 5
Choose a profile to edit.

STEP 6
Navigate to Name.

STEP 7
Enter your new Profile Name, navigate to DONE and press "OK".

STEP 8
Your new profile name will be shown in the Profile Selection Screen.

No, this change in due date will not impact your monthly bill subscription.

1. Open/Download the My Astro app or visit My Astro web.

2. Login with your Astro ID.

3. Go to Account.

4. Under Billing, tap on e-Invoice.

5. Toggle the button to enable the e-Invoice, fill in the require details and tap 'Submit'.

6. Tap 'Confirm'.

7. Select 'Approve' to update e-invoice.

8. A successful notification will be displayed.

Watch this video or follow below steps to refresh signal of your Astro box

OR

Please ensure to put your box on standby mode to refresh the signal.

The fastest way is via My Astro:

1. Open/Download the My Astro app or visit My Astro web
2. Login with your Astro ID
3. Go to Account
4. Tap on Subscription or TV pack
5. Tap on Rooms
6. For the box that you would like to refresh the smartcard, tap on 'Refresh box' button. This will refresh your Astro box signal

OR

WhatsApp
1. Message 'Hi' to us at 03-9543 3838
2. Click on Tap Here for Options
3. Select Help & Support
4. Type Refresh Astro Box Signal

-
📡 Experiencing technical issues?

📱 Download the My Astro app to:
- Perform self-troubleshoot
- Solve in a few minutes
- No need to call customer service

Currently, Maxis, Digi, Celcom, TuneTalk, U-Mobile, Yes, XOX and Webe.

No. When you log in to the new Disney+ app using the same email address or mobile number associated with your existing Disney+ subscription, Disney+ will match the subscription linked to your account, so you can continue using your current subscription without duplicate billing.

Astro continuously reviews its product propositions to ensure we can provide the best customer experience for all our subscribers. We have discontinued the 50% multiroom in order to allow our Astro subscribers with a subscription fee of RM100 or more to only pay a standard RM49.99 (with box setup) to enjoy the Multiroom experience on an Ultra or Ulti Box.

We apologise for any inconvenience.

ZEE5 offers a wide range of exclusive content that is available only for ZEE5 premium members, which includes ZEE5 Originals, world-renowned Hollywood flicks, blockbuster Hindi cinemas, superhit regional movies across 18 different languages, American TV shows, documentaries, dubbed movies in regional languages and so much more. With a premium membership, you can enjoy all these exciting content with a seamless ad-free experience.

The Download function offers an alternative to streaming so that you can watch TV shows and movies offline anywhere.

You can start downloading a movie/TV show by clicking on the "Download” button. Kindly note that you can only download one title at the time. Other titles will be in queue and will start downloading automatically as soon as the first download is complete.

Once you have downloaded a title, the progress icon will show “Complete” and you may find your downloaded content by checking “My Library” > “Downloads”.

*To save on data usage, we recommend downloading via Wi-Fi.

Downloaded content retention periods vary according to the type of content.

1. Each movie – minimum 2 Days
2. Each TV series episode - minimum 7 Days

The number of days left for you to view your content in offline mode is shown for each piece of downloaded content for your reference. Expired content will be automatically deleted from the app, freeing up your device storage.

For Residential Astro Pay TV customers: You may change your contract from e.g., 12-month to 24-month without incurring a switching fee or cancellation fee. However, if you change your contract from e.g., 24-month to 12-month, will be charged a cancellation fee accordingly if still within minimum term (contract) period. No switching fee applicable.

STEP 1

While watching linear channel, press “OK” to launch player banner.

STEP 2

Press “OK” again to Pause. You will see an Icon on the left of TV screen.

STEP 3

Press “OK” again to resume the program.

STEP 4

Navigate to Back To Live TV and press "OK" to go back to the live view.

Viu is available on the Ultra/Ulti Box for Astro customers to enjoy, as well as www.viu.com and
the Viu mobile app. If you have yet to upgrade to our latest Ultra/Ulti Box, please reach out to us
via WhatsApp by typing “Hi” at 03-9543 3838.

STEP 1

Press "HOME" button on your remote control.

STEP 2

Navigate to Settings and press "OK".

STEP 3

Navigate to Display and press "OK".

STEP 4

Navigate to TV Settings and press "OK".

STEP 5

Navigate to Conversion for 4:3 Input Video, select your preferred selection and press “OK”.

STEP 6

Select Yes, continue and press "OK" to confirm on the changes.

Otherwise, select No, go back to cancel.

STEP 1

Switch off the power for your box and make sure that the adapter's power light is off.

STEP 2

Locate the SIM card at the left side and gently pull it out.

STEP 3

Wipe the SIM card's gold chip clean using a dry soft cloth.

STEP 4

Make sure the gold chip is facing down and reinsert it all the way in.

STEP 5

Switch on the power for your box and make sure that the adapter's power light is on.

Please wait for 5 minutes.

STEP 6

Turn on your Ultra Box. You should no longer be experiencing this problem.

If issue persist, please submit the issue in our Feedback Form with the error details and provide sim card number for assistance.

Yes. To change the language, go to the app’s side menu, then go to Settings and select the preferred interface language.

Yes. There is a possibility more courier partners will be added in the future. We will keep you informed of any new information.

If an error message on your TV has one of the following keywords:
- Switch to Continuous Viewing
- Service Currently Not Available (SCNA)
- (Code: SCNA)

You can proceed with the troubleshooting steps below if the weather is good. Otherwise, you may try again later.

STEP 1

On your remote, press the Home button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Settings.

STEP 3

Navigate to Satellite Settings and press OK.

STEP 4

Navigate to Diagnostics and press OK.

STEP 5

Refer to the signal strength on your screen.

If it is 65 or higher, please take the screenshot and submit your feedback form.

If it is below 65, please go to Step 6.

STEP 6

Switch off the power for your box and make sure that the adapter’s power light is off.

STEP 7

Unscrew the satellite cable from the box and pull it out.

STEP 8

Plug the satellite cable back into the box and screw it back securely.

STEP 9

Switch on the power for your box and make sure that the adapter’s power light is on. Please wait for 5 minutes.

STEP 10

Turn on your box. You should no longer be experiencing this issue.

If issue persist, please submit the issue on our Feedback Form with error details and attach a picture of your General tab of the STB Diagnostics for assistance.

Centralised Dish

If your Astro Box is connected to your apartment or condo building's centralised dish and the issue persists, please contact your respective Building Management before reaching out to our agents.

Yes, Prime Video is available to Astro customers through the following options:

• Included at no additional cost for customers on the Ultra/Ulti Box with either the Astro One Epic Pack or Movies Pack as part of your subscription bundle.
• Available from 24 June 2025 at no additional cost for customers not on the Ultra/Ulti Box but subscribed to either the Astro One Epic Pack or the Movies Pack as part of their subscription bundle.

Each account can only have one Astro X3 pack subscription at a time, whether it is the Astro X3: Entertainment 12 Pack or the Astro X3: Sports 12 Pack. Multiple subscriptions under the same account are not supported. If you wish to subscribe to another plan, you can do so by creating a separate account using a different email address. Each subscription will be managed independently.

Currently, there are no rebates provided when you sign-up for the Ultra/Ulti Plug & Play Box.

Astro Multiroom is a 2nd Astro subscription that mirrors all the channels on your primary Astro at a discounted monthly fee. You can now enjoy Astro on different TVs in different rooms.

Kindly refer to the steps below to log in:

STEP 1

Click on the Disney+ app logo under the Apps rail on your Home page

STEP 2

Select Log In

STEP 3

Scan the QR code or visit the website on screen to log in

STEP 4

Key in the on-screen code to pair your TV

STEP 5

Enter your email address or mobile number associated with your Disney+ subscription

STEP 6

Select whether you want your OTP to be sent to your email address or mobile number

STEP 7

Key in your OTP

STEP 8

Review and agree to the Disney+ terms

Only applicable to first time log in to Disney+ after the app migration

STEP 9

Create your user profiles

Only applicable to first time log in to Disney+ after the app migration

STEP 10

Select your user profile on your TV screen to start watching

No, the quality of your video depends on the speed and reliability of your internet.

You may view your current subscription details or the channels and packages you are currently subscribed to via My Astro App or My Astro Web. Just login to your accmyastro.astro.com.my/download/ount and click on Manage Subscription to view.

Here's how you can purchase Astro First movies on My Astro:

1. Open/Download the My Astro app or visit My Astro web
2. Login with your Astro ID
3. Go to Astro Store
4. Select the Astro First title
5. Tap on 'Rent'
6. Confirm the rental
7. You will see a rental success message on which channel you can watch the movie and when it will expire

🎁 Want to buy Astro First movies faster & track your rentals?

📱 Download the My Astro app to:
- Browse Astro First titles
- Rent in 1 tap
- Get reminders when new movies launch

Yes, you can continue to access Prime Video if you have an active subscription to the Epic or Movie packs, where Prime Video is included.

If you upgraded to a pack that includes Prime, you do not need to reactivate Prime Video. Streaming access will continue seamlessly.

If you downgraded from a pack that includes Prime Video, you will need to reactivate Prime Video to resume streaming and retain your watch history.

Your watch history is linked to the Prime Video account that was initially activated. Therefore, if you reactivate Prime Video using the same email address or mobile number used during the original activation, your previous watch history will be restored.

Note: If you are on any other pack, you will need to purchase Prime Video separately at RM25 month to continue enjoying access.

We would need you to run few tests in order for us to understand your issue and to assist you in fixing the problem.

You may proceed with the troubleshooting steps below which should not require any longer than 15 minutes.

1. Please run each of the tests according to your your Laptop/PC Software.
2. Compile the pictures / screenshots of your test results in one file (i.e Microsof Word document, PDF file) and attach them in the Support Ticket below in order for us to assist you further:
   • List of websites effected.
   • Run the Speed Test via LAN (cable) and Wi-Fi connection - Please click here for Speed Test guideline.
   • Run the Traceroute Test - Please click here for Traceroute Test guideline.
   • Run the Ping Test - Please click here for Ping Test guideline.
3. Once you/ve gathered all the results, kindly send them all through the Feedback Form below.

Quick Info
A Speedtest is a service that provides free analysis of Internet access parameters, such as connection data rate.
A Ping Test shows how long it takes for packets to reach host.
A Traceroute Test traces the route of packets to destination host from our server.

Please ensure that you have subscribed to the mentioned channel.
If you're subscribed to this channel, follow below steps.

STEP 1
You need to refresh the signal on your box.
Refer to Refresh signal of your box guide.

STEP 2
If issue persist after 30 minutes, proceed to submit report via WhatsApp or Feedback Form.

When Band Steering is enabled, only one SSID network name with one password is available. Example:

i. SSID: SSID, Password: 12345678

STEP 1
On your remote, press the Home button and the home menu will be displayed on your screen.

STEP 4
Navigate to Add Profile.

STEP 5
Choose your Profile.

STEP 6
Input the Profile Name and navigate to DONE.

STEP 7
Choose the Age Group of the new profile and press "OK".

STEP 8
Your new profile will be shown in the Profile Selection Screen.

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Settings.

STEP 3

Navigate to Master PIN and press “OK”.

STEP 4

Please enter your PIN (Default PIN is 0000).

STEP 5

Please enter your new PIN.

STEP 6

Please re-enter your new PIN to confirm.

STEP 7

Your PIN successfully changed when this screen appears.

Yes, a third party is allowed to make the advance payment on your behalf. In the case of refund, the amount will be returned to the owner of the third-party account (source of payment).

The default PIN is 0000. You may change your PIN to a secure one by doing this at Settings, under your Preferences, select PIN Management, enter your old PIN or default PIN and proceed to create a new PIN.

You should have received an email or SMS with your activation details, please click on the link provided to be redirected to the Netflix website to activate your account.

Alternatively, you can also activate Netflix on your Ultra/Ulti Box. Please surf to CH 741 on your Ultra/Ulti Box (or click the Netflix button on your Astro remote) and follow the instructions on the screen.

You can add a reminder to pay your bill, on your Google Calendar with one click. Enjoy uninterrupted services, by remembering to pay your bill on time.

Yes, the 6% Service Tax applies to add-on Astro services effective bill date 9^th July 2024 onwards.

The Astro Fibre App is supported on all iOS devices version 16 or later and Android devices version 9 or later. To download the app, you may visit your mobile app store and search for “Astro Fibre App”. Alternatively, you may install the app on your mobile device by clicking here (Google Play Store) or here (iOS App Store).

Yes, you can. Click on Menu > Language and choose your preferred language. Then, click “SAVE”

Yes, there will be a selection of titles available with Video On Demand (VOD) rights. Please note that VOD availability for movies is subject to content rights.

If you accidentally delete your mesh:

1. Login to the Astro Fibre App.
2. Go to Network > click on the plus (+) sign.
3. Enter your serial number (starts with SRXxxxxx).
4. Click OK to add the mesh back.

You may check your bills and outstanding via My Astro web or My Astro app via this link.

Note: Bill statements and payment history are not available on WhatsApp. For a more complete billing experience, including access to your payment history, download and use the My Astro app.