Of course! Please ensure your account is active when requesting for a move.

STEP 1

Identify your remote control:

a) Remote control with Astro logo at the bottom of the remote, proceed to STEP 2.

b) Remote control with Astro logo at the top of the remote, proceed to STEP 4

STEP 2 (Astro Logo at the bottom of the Remote)

On your remote, press the “set tv” button and set tv instructions will be displayed on top of your screen:

STEP 3

Follow the steps appear on the TV screen to sync your Astro remote and complete the setup.

STEP 4 (Astro Logo atthe top of the Remote)

Press and hold “tv input” key on bottom left of the remote for 3 seconds until the LED blinks twice.

STEP 5

Enter the 2-digit TV Code of your TV Brand and the LED will blink twice:

STEP 6

Try out the TV controls (TV Standby or adjust Volume) to check if they are working correctly.

STEP 7

Press ok and wait for the LED to blink twice to save the settings.

There will be no changes as long as they relate to the Astro Broadband/Fibre services. This includes add-on subscriptions on Mesh WiFi, which remains at 6%.

Yes, you can change your subtitle and dubbing for your contents, however, the dubbing may differ from content to content.

Yes, for customers on the Primary, Movies, Movies Plus, Sports, Sports Plus or Premium 1 Pack,
you will still be able to enjoy Viu Premium as an add-on for as low as RM8.40/month (RRP:
RM14.90). Please refer to the table below for the complete pricing:

1. Unifi netis brand

The following shows an Interface based on Unifi router

1. Launch Web Browser and enter the default's gateway's IP address (192.168.1.1) in the address bar.

1. Enter Username and Password.
   1. Username = tmadmin
   2. Password = Adm@xxxx (xxxx refers to last four digits of MAC address)

1. Choose WLAN -> wlan0 (2.4GHz) Basic Setting. Note down on SSID.

1. Choose WLAN -> wlan1 (5GHz). Compare SSID with previous SSID.

1. If SSID for wlan0 (2.4GHz) and wlan1 (5GHz) are the same. Change wlan1 (5GHz) SSID by adding number 5(i.e. ifuni_5G) to differentiate from 2.4 GHz. Click Apply Changes.

Note: Connection to Wi-Fi may be temporarily loss while the changes is updated.

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Settings.

STEP 3

Navigate to Network Settings and press "OK".

STEP 4

Navigate to Network Diagnostics and press "OK".

STEP 5

Network Diagnostics screen will be displayed accordingly.

If you cancel your Astro X3 subscription mid-month while still under contract, the termination will take effect at the end of your current billing cycle. Your service will remain active until then, and no partial or prorated refund will be provided. And early termination fee charges may still apply.

However, refunds may be applicable if there is an excess credit balance in your account, such as an overpayment or duplicate payment. Any eligible refund will be processed in accordance with Astro's refund policy.

Yes, another person may register their credit card to your account's auto-debit facility. If you are performing this action via our call centre, the respective card holder is required to be present.

Any termination within contract period will be subjected to an Early Termination Fee (ETF).

Customers will still be charged a penalty of RM 100 (exclusive of Sales and Service Tax), as per our terms and conditions, as the Astro Box & SIM Card are properties of Astro.

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Settings.

STEP 3

Navigate to STB Diagnostics and press "OK".

STEP 4

Select General Diagnostics and press "OK".

STEP 5

Details information of General Diagnostics screen will be displayed.

STEP 6

Press down arrow on your remote to get more information.

The new Astro First (channel 480) serves as the one-stop, ultimate home cinema offering the biggest and latest local and international blockbuster films where you can:-

• Enjoy value for money viewing for local and international movies from only RM15* per movie (*excluding tax).

• Watch each movie for up to 12 different times over 48 hours* at your convenience (*unless stated otherwise).

• Watch local/regional movies or international movies from Hollywood studios as recent as 2 weeks or 3 months respectively from Malaysia’s cinematic release, in addition to exclusive titles only available on Astro First.

You will be able to check your balance, switch to e-billing, request for payment barcode and request for reconnect at standard telco rate.

If your Astro service is suspended, your Disney+ subscription will be paused and will only resume once your Astro service has been reinstated.

If your Astro service is terminated, your Disney+ subscription through Astro will also be terminated.

Sun NXT is an app that offers content in six different languages: Tamil, Telugu, Malayalam, Kannada, Bengali, and Marathi. The app carries a large collection of movies, including Tamil classics and latest releases. Sun NXT also offers a variety of content ranging from TV shows, live TV shows, news, music videos, kids' shows, comedy clips, to trailers.

Starting 29th April 2025 onwards, Sun NXT will be available on Astro via two tiers:

• Sun NXT Lite: Complimentary for Indian Favourites/Maharaja Pack customers only, with content similar to 6 Sun channels (SUN TV HD, SUN MUSIC HD, SUN LIFE, SUN NEWS, ADITHYA & KTV,) and Video On Demand (VOD) content (TV shows), with more than 2000 hours of content.
• Sun NXT Premium: Available to all Astro customers for only RM 25.00/month (RRP RM30.80) with an expanded access to the full Sun NXT library.

The new packs will be available starting 9 December 2024 and you can subscribe via:

• The Astro website: www.astro.com.my

• WhatsApp at 03-9543 3838 and type GET ASTRO

• Astro Customer Service Centres

We would need you to run few tests in order for us to understand your issue and to assist you in fixing the problem.

You may proceed with the troubleshooting steps below which should not require any longer than 15 minutes.

1. Please run each of the tests according to your your Laptop/PC Software.
2. Compile the pictures / screenshots of your test results in one file (i.e Microsof Word document, PDF file) and attach them in the Support Ticket below in order for us to assist you further:
   • List of websites effected.
   • Run the Speed Test via LAN (cable) and Wi-Fi connection - Please click here for Speed Test guideline.
   • Run the Traceroute Test - Please click here for Traceroute Test guideline.
   • Run the Ping Test - Please click here for Ping Test guideline.
3. Once you've gathered all the results, kindly send them all through the Feedback Form below.

Quick Info
A Speedtest is a service that provides free analysis of Internet access parameters, such as connection data rate.

A Ping Test shows how long it takes for packets to reach host.

A Traceroute Test traces the route of packets to destination host from our server.

Please make sure that:

• You are entering the correct account holder's information while linking, ie: I/C number, passport number, Astro account number or Smart card number.
• You are linking to an Astro account (NJOI customers will not be able to log into Astro GO).
• Your Astro account is not currently linked to any other Astro ID. If your Astro account is currently linked to another Astro ID, you will see a red notice.

To find out which Astro ID is currently linked to your account, you may submit a feedback form. Kindly select feedback type "I have an enquiry/issue with Apps"

The new packs and access to Netflix on the Ultra Box and Ulti Box is available for Astro IPTV customers.

Unfortunately, subtitles and dubbing options are currently not available.

Within the packs itself, it is not possible to replace or swap out specific services or content. These new packs are designed to provide the best value and content variety at an affordable price. We encourage you to enjoy your experience with the pack and if you’d like, to consider any suitable add-ons for content/service/apps to complement your viewing experience further.

1. Open/Download the My Astro app or visit My Astro web.

2. Login with your Astro ID.

3. Go to Account.

4. Under Billing, tap on Auto Debit.

5. Select 'Update expiry date'.

6. Key-in the expiry dates, then tap 'Save'.

7. A successful notification will be displayed.

The fee is a one-time activation fee that will be charged when you subscribe to the Plug & Play Box.

Yes, customer may choose to have different billing method for each different account.

Physical bill charging will only apply to the account that has opted for paper bills.

Although it is possible to pair the second mesh node unit with the first mesh, customers are advised to follow similar steps in setting up the Mesh Network by pairing the mesh unit with the WiFi router instead.

You will be able to watch the same video on demand content on your Ultra/Ulti Box as the ZEE5 mobile app or website. However, ZEE5 live channels are currently not available on the Ultra/Ulti Box. Please stay tuned for updates!

Please ensure that you are using the correct ID for eKYC submission.

For Malaysians :

1. Please ensure you are using MyKad or MyTentera.

2. Capture the front and back of your ID.

3. Ensure that there is no glare when capturing the photo.

4. Ensure that are capturing it in a bright room to have the highest picture quality.

5. Please do not cover your ID when capturing it, as it may impact the OCR Optical Character Recognition accuracy.

For Malaysian Permanent Resident and Other Nationality :

1. Please use Passport only.

2. Please capture your whole passport, which has your personal information on it and your signature.

3. Ensure that there is no glare when capturing the photo.

4. Please do not cover your ID with your when capturing it, as it may impact the OCR Optical Character Recognition accuracy.

No, there is no penalty fee if you decide to cancel your Multiroom (Smart TV) subscription.

No. Your scheduled recordings will remain the same, although the channel numbers have changed.

If the bill has been paid, there will not be any additional service tax charge. However, if the bill has been issued by Astro but has not been paid, then the 8% Service Tax will be reflected in the next bill with adjustments on the new tax rate for services rendered from 1st March onwards.

Example:
Bills issued on 15th February will be charged the 6% SST. Customers will see proration for 8% from 1st – 14th March in the next bill issued on 15th March 2024. If you have fully paid your February bill before 1st March, the Service Tax will remains at 6%. You will be able to see the adjustment reflected in your next bill.

For technical visit, the current fees will remain unchanged i.e.: 8% Service Tax absorbed by Astro. As for installation fees, current fees will remain unchanged i.e.: 6% Service Tax has already been included in installation fees, as 2% will be absorbed by Astro.

You will be able to enjoy all the content on the iQIYI app immediately upon successful purchase from the Astro website. You may enjoy your VIP privileges from the iQIYI app on your Ultra Box, Ulti Box, mobile devices (Android & iOS), Apple TV, Android TV, as well as on Web (www.iq.com).Please ensure that the account used to log in to the app is the same one used to purchase your iQIYI VIP subscription.

If you have more than one card registered for OTP payments, you will be asked to select the specific card to be used for that specific transaction.

Here's how you can purchase Astro First movies on My Astro:

1. Open/Download the My Astro app or visit My Astro web
2. Login with your Astro ID
3. Go to Astro Store
4. Select the Astro First title
5. Tap on 'Rent'
6. Confirm the rental
7. You will see a rental success message on which channel you can watch the movie and when it will expire

🎁 Want to buy Astro First movies faster & track your rentals?

📱 Download the My Astro app to:
- Browse Astro First titles
- Rent in 1 tap
- Get reminders when new movies launch

As a rule of thumb, this issue might happen when the devices are not equipped with minimum requirement above that supports the subscribed internet speeds:

• WiFi technology
• Network Interface Card (NIC)

As mentioned above however, it is important to note that despite meeting the device minimum requirements, it is not a guarantee that devices connected over WiFi will be able to achieve maximum subscribed internet speeds due to the following:

1. Bad WiFi signal quality and coverage across the area due to:
   • Distance from the RGW/Mesh AP with connected device
   • Obstruction within the house (walls, metallic surfaces)
   • Interference with other household appliances
2. Congested bandwidth
   • If there are too many devices connected to the WiFi network, then the bandwidth might be overloaded with traffic hence, slowing down the speed
3. Devices are connected using WiFi instead of wired using LAN.
   • It is important to note that wired connection offers better reliability and speed over WiFi.
   • WiFi is more prone to interference compared to a wired connection which causes lower speeds and dropped signal.
4. Router Positioning: Most people underestimate the importance of picking a good spot for a Wi-Fi router. Even a small shift in positioning could end up being the difference between day and night:
   • High vs. Low: Put the router as high up as possible to extend the broadcasting range of the radio waves. This also helps clear the router of possible interferences.
   • Concrete & Metals: Make sure your router isn’t blocked by any other objects, especially devices that are electronic. Also, avoid placing your router in your basement as this area is usually enclosed by a lot of concrete, which can be almost impossible for Wi-Fi signals to penetrate.
   • Distance to Router: The further away from your router you get, the weaker the Wi-Fi signal. Therefore, the best option is to place your router as close to your devices as possible, but this is only practical if you have one main area where you tend to use your devices. Otherwise, you should place your router near the center of your home. After all, Wi-Fi broadcasts in 360 degrees, so it doesn’t make sense to put it at one end of the house.
5. Usage
   • More likely, however, is that the people on your network such as friends, roommates, or family members are participating in bandwidth-heavy activities like gaming and streaming Ultrabox/Netflix.
   • Fortunately, if this is the case, you can prioritize your own network traffic by enabling Quality of Service in your router settings.
   • If the problem persists, please run a Ping Test/Traceroute Test and attach the picture or screenshot of both test results in the Feedback Form below, in order for us to provide further assistances. Please make sure to attach the required screenshot(s) in ONE file (i.e. Microsoft Word document, PDF, Image file) before submitting the form.

Note:
Astro and its service providers will not offer any guarantees for compatibility of the customer's equipment (e.g., Personal Computer, Notebook, printers) nor provide on site troubleshooting for WiFi service issues related to the customer's equipment.

To request for a move, you may choose to:

(The fastest way) Self-serve by logging in to My Astro and follow the steps below:

1. Download the My Astro app or use the web version of My Astro
2. Login using your Astro ID
3. Go to Account > Profile > Address
4. Tap on the edit icon on 'Service address'
5. Verify your identity via SecureGo or OTP
6. Fill in your new address and confirm your relocation
7. A support ticket will be created and we will be in touch

OR

Submit your feedback via below link: https://support.astro.com.my/feedback-form

1: Choose Feedback Type

• Type: Technical issues
• Issue: I want to enquire about installation/ relocation

2: Fill in the form and click “Submit” support ticket.

1. Launch the Simply South icon on your Ultra and Ulti box
2. Click on “Log in” button via top menu in Simply South app
3. Follow the instructions displayed on your TV screen

If you’re facing issues updating your mobile number via My Astro, here’s how you can update your mobile number through your Set Top Box (STB).

• Follow Method A if your box uses a satellite dish (Applicable to all boxes).
• Follow Method B if you are on Ultra or Ulti box that is connected to the internet.
• If your box has both, either method will work.

Method A:

1. Switch on your box and navigate to Channel 105 OR Channel 201 OR Channel 308 OR Channel 802.
2. Press on the red button on your Astro remote control and a QR code will be displayed on your screen.
   
3. Scan the QR code on a mobile device.
4. On the newly opened webpage, please enter your new mobile number.
   
5. To verify your identity, please enter the last 6 digits of the Astro account holder’s MyKad/Passport.
   
6. Please enter the OTP sent to the new mobile number.
   
7. Once the OTP is verified, your mobile number will be updated.
   

Method B:

1. Switch on your box and launch My Astro through the top menu or from the ‘Apps’ section.
2. Once you are in My Astro, press the yellow button on your Astro remote control to visit your ‘Account details’.
   
3. Press the down button to view ‘Personal info’.
   
4. Press the left button and focus on the edit icon for mobile number, press on "OK" to change your contact details.
   
5. To verify your identity, please enter the last 6 digits of the Astro account holder’s MyKad/Passport.
   
6. Please enter your new mobile number.
   
7. Please enter the OTP sent to the new mobile number.
   
8. Once the OTP is verified, your mobile number will be updated.
   

If you’re still unable to update your mobile number, kindly reach out to us via our Feedback Form and a representative from our team will get in touch to assist you soon.

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Settings.

STEP 3

Navigate to Remote Control Settings and press "OK".

STEP 4

Follow the steps appear on the screen to sync your Astro remote.

1. Clearly indicate full name of Astro customer, contact number and Astro subscription account number when making each payment (e.g. on bank-in slips)
2. For Direct Debit, please contact your bank for standing instructions. Provide the full name of Astro customer and Astro account number. The Direct Debit service may not be available with all banks. Please check with your bank for confirmation of Direct Debit service.
3. Please inform us of any changes in billing address/information by contacting us via one of these platforms.

IMPORTANT NOTICE: To avoid any problems in payment processing, please pay only at authorised Astro payment channels

Prime Video is available as an add-on to all Astro customers at RM25 per month (tax included). However, Prime Video is available to the following Astro customers at no additional cost:

• Customers on the Ultra/Ulti Box with either the Astro One Epic Pack or Movies Pack as part of their subscription bundle.
• Customers not on the Ultra/Ulti Box but subscribed to either the Astro One Epic Pack or the Movies Pack as part of their subscription bundle, starting 24 June 2025.

Watch this video or follow below steps to Improve Slow WiFi Connection for Astro Fibre

Slow browsing using LAN cable

Looks like there is something wrong with your service connection.

Please run the Speed Test and attach the picture or screenshot of the speed test in the Feedback Form below, in order for us to provide further assistances.

Click here for Speed Test guideline.

Quick Info

A Speedtest is a service that provides free analysis of Internet access parameters, such as connection data rate.

Slow browsing using Wi-Fi

1. Router Positioning

Most people underestimate the importance of picking a good spot for a Wi-Fi router. Even a small shift in positioning could end up being the difference between day and night.

i) High vs. Low

Put the router as high up as possible to extend the broadcasting range of the radio waves. This also helps clear the router of possible interferences.

ii) Concrete & Metals

Make sure your router isn't blocked by any other objects, especially devices that are electronic. Also, avoid placing your router in your basement as this area is usually enclosed by a lot of concrete, which can be almost impossible for Wi-Fi signals to penetrate.

iii) Distance to Router

The further away from your router you get, the weaker the Wi-Fi signal. Therefore, the best option is to place your router as close to your devices as possible, but this is only practical if you have one main area where you tend to use your devices.

Otherwise, you should place your router near the center of your home. After all, Wi-Fi broadcasts in 360 degrees, so it doesn't make sense to put it at one end of the house.

2. Wireless Interference & Noise

You've probably never noticed but there are wireless signals all around you wherever you go and they're passing through you all the time. From where? Electronic devices, Wi-Fi routers, satellites, cell towers, and more.

Although Wi-Fi is supposed to be on a different frequency than most of these devices, the amount of radio noise can still cause interference. Some common causes of interference include:

i) Microwaves

ii) Bluetooth Devices

iii) Cordless Phone

3. Surrounding Wi-Fi signals

A truth of the modern world is that every household has their own Wi-Fi network, which can cause issues with channel overlap. This can be somewhat problematic in a townhouse, but is especially problematic in housing complexes and apartments where there can be many routers within close proximity.

Which is why it's important that you pick a good channel in your router settings. Modern routers can choose channels for you automatically, but sometimes it's better to investigate and find the best channel yourself.

4. Usage

More likely, however, is that the people on your network such as friends, roommates, or family members are participating in bandwidth-heavy activities like gaming and streaming Ultrabox/ Netflix.

Fortunately, if this is the case, you can prioritize your own network traffic by enabling Quality of Service in your router settings.

If the problem persists, please run a Ping Test, Traceroute Test and attach the picture or screenshot of both test results in the Feedback Form below, in order for us to provide further assistances.

Please make sure to attach the required screenshot(s) in ONE file (i.e. Microsoft Word document, PDF, Image file) before submitting the form.


Quick Info
A Speedtest is a service that provides free analysis of Internet access parameters, such as connection data rate.
A Ping Test shows how long it takes for packets to reach host.
A Traceroute Test traces the route of packets to destination host from our server.

You can proceed with below troubleshooting if the weather is good. Ortherwise, you may try again later.

STEP 1
On your remote, press the “HOME” button and the home menu will be displayed at the bottom of your screen.

STEP 2
Navigate to SETTINGS and press “OK”.

STEP 3
Navigate to STB DIAGNOSTICS and press “OK”.

STEP 4
Refer to the signal strength % shown on the top left of your screen.
If it is 65% or higher, please go to WhatsApp to receive further help.
If it is below 65%, please go to STEP 5.

STEP 5
Switch off the power for your box and make sure that the adapter’s power light is off.

STEP 6
Unscrew the satellite cable from the box and pull it out.

STEP 7
Plug the satellite cable back into the box and screw it back securely.

STEP 8
Switch on the power for your box and make sure that the adapter’s power light is on.
Please wait for 5 minutes.

STEP 9
Turn on your box. You should no longer be experiencing this issue.
If issue persist, please attach a picture of your General tab of the STB Diagnostics for assistance.

Centralized Dish
If issue persist under a centralised satellite dish, please refer to your respective Building Management before contacting our agents.

Effective from the bill date 9th July 2024 onwards, the Service Tax for the Broadband Bundle/Fibre Bundle will be streamlined at a rate of 6%. The prorated adjustment for your Pay TV subscription will be calculated based on 6% service tax rate on your next bill, following your current subscription's tax rate.

For Astro Ultra and Ulti Box customers

• No action is required.
• The new Disney+ app will be made available automatically on your Astro Box from 7 October 2026.
• You can sign in using the same email address or mobile number associated with your existing Disney+ account to start streaming.

For customers who watch on personal devices (e.g. mobile phones, tablets or Smart TVs)

• Download the new Disney+ app to continue streaming Disney+.
• You can sign in using the same email address or mobile number associated with your existing Disney+ account to start streaming.
• The current Disney+ app will remain available until 4 November 2026, giving customers time to make the switch.
• Samsung and LG Smart TV users are encouraged to download the new app before 20 October 2026.

You can access your Prime Video Account on up to three (3) devices at a time (including your Ultra/Ulti Box), have up to 6 different profiles. However, you are only able to stream 2 devices concurrently for a single show/movie. To ensure a smoother streaming experience, please sign out from any unused devices.

If you don't know your HBO Max password, you can reset it. You need to have access to your account email to reset your password:

1. Do one of the following:
   • On the HBO Max sign-in screen, choose Forgot Password?
   • Go to hbomax.com/forgot-password.
2. Enter your HBO Max (or HBO Max) account email and choose Submit. Forgot your account email?
3. Check your inbox for a HBO Max Password Reset email. This email should arrive within a few minutes.
4. Open the most recent Password Reset email and choose Reset Your Password.
5. Enter a new password and choose Save.

Now, sign in with your account email and your new password.If you don't get a HBO Max Password Reset email, go to Can't reset password.

If you require any assistance with the app, you may:

1. Visit the WeTV official Facebook Page for more information: WeTV Malaysia - Home | Facebook; or

2. Drop the WeTV team a message via Facebook chat here

If you encounter any issues with your Astro billing and entitlement, you may contact our Customer Service by:

1. Submitting a feedback form here: www.astro.com.my/contactus/form; or

2. Reaching to us via WhatsApp by typing "Hi"at 03-9543 3838