No, the Service Tax is a tax payable entirely to the Government. Astro acts as a collection agent for the Government.

You will only be able to watch Astro GO and/or Multiroom Smart TV on up to 2 devices at the same time as opposed to 4 devices with Astro GO+.

Your cloud recording storage will also decrease from 1500 hours down to 200 hours. Your stored recordings/downloaded shows that exceed 200 hours will also be removed.

Payment for Astro services will not increase. However, the Service Tax applicable will be increased from 6% to 8% and this will result in an increase in the total amount payable.

Please check your internet speed and connection status via an internet connection test (https://www.speedtest.net/). If your internet is working fine and the issue persists, please try uninstalling and reinstalling the app on your device.

STEP 1

Press "HOME" button on your remote control.

STEP 2

Navigate to Settings and press "OK".

STEP 3

Navigate to Digital Audio and press "OK".

STEP 4

Choose your preferred selection and press “OK”.

STEP 5

Select Yes, continue and press "OK" to confirm on the changes.

Otherwise, select No, go back to cancel.

The Netflix subscription through Astro is subject to a minimum commitment period of 24 months (“Netflix Minimum Subscription Period”). If you choose to discontinue or terminate the subscription before the commitment period ends, a cancellation fee (“Netflix Early Termination Fee”) will apply. Additionally, downgrading your plan will involve a Switching Fee.

If you have a box that is not an Ultibox or Ultrabox, please recycle your box at a registered collection centre that will properly manage the boxes in an environmentally friendly way. Click here to find a registered collection centre near you.

For your old Ultibox or Ultrabox, once your Plug & Play Box has been activated, a courier service will reach out to you within TWO (2) weeks for a time for them to pick up the old Astro box and SIM card/Smartcard.

1. Ensure that all cables have been plugged out of the old Astro box. To remove the white satellite cable from your old Astro box, simply hold the cable, twist, and gently pull.
2. Set aside these items to be ready for our delivery partner to pick up from you

- Old Astro Box
- Old Astro Smartcard/SIM Card (leave this in your Astro Box)

1. When a courier arrives at your residence, do confirm that they are collecting items on behalf of Astro.
2. Allow the courier to check the serial number of the Astro box.
3. Hand them all the items for return, and you're done!

Wider WiFi coverage:

- All areas across the house will enjoy optimal coverage with multiple Mesh WiFi units located in areas with sub-optimal coverage to form a larger WiFi network.

Stable connection;

- Consistent coverage of optimal WiFi signal will ensure a stable connection as the Mesh unit will automatically connect your devices to the strongest WiFi signal around your house.

As e‑Invoicing supports quicker processing, smoother transactions and a more seamless billing and tax compliance experience over time, we highly encourage customers to stay opted in. It also makes it much easier for you to keep proper records for tax relief claims. If you still wish to stop receiving e‑Invoices, you can opt out through the My Astro website or the My Astro app.

On the My Astro website:

1. Log in using your Astro ID.
2. Click Bills, scroll down to e-Invoice, and toggle it off.
3. Please click Confirm to ensure that the changes has taken place.

On the My Astro app:

1. Log in using your Astro ID.
2. Tap your account number or the default profile icon at the top left.
3. Scroll down to the Billing section, select e-Invoice, and turn the toggle off.
4. Please click Confirm to ensure that the changes has taken place.

After completing the subscription process, you will be able to access the iQIYI App on the Ultra/Ulti Box by following the steps below:

On your Ultra/Ulti Box
Step 1: At the Home menu, go to the App Rail and select "iQIYI"
Step 2: Click "OK" on your Astro remote
Step 3: While on the iQIYI App Home Page, navigate to "VIP account" located at the top left pane and click "Login". A page with a QR Code will be presented on your TV screen
Step 4: Scan the QR code using your mobile device and you will be directed to the iQIYI mobile app
Step 5: Follow the steps under "On Mobile App" below to pair your iQIYI account with your Ultra/Ulti Box

On the iQIYI Mobile App
Step 1: Download the iQIYI App on your mobile device
Step 2: At the login page, select "Continue with Astro"
Step 3: Log in with your Astro ID
Step 4: Click on the "Me" icon located at the bottom of the screen, and you will be presented with your iQIYI profile page
Step 5: Click on the in-app QR code scanner located at the top right corner of the screen
Step 6: Scan the QR Code displayed on your TV screen with the in-app QR code scanner. Refer to Step 3 under "On your Ultra/Ulti Box" above
Step 7: The screen on your TV will reload automatically and the iQIYI App home screen will be displayed. Now, you can enjoy the iQIYI App on your Ultra/Ulti Box!

Starting 7 October 2026, Disney+ will transition to a new Disney+ app experience. Astro customers can continue enjoying Disney+ via Astro with no changes to their Disney+ subscription or monthly fee.

Customers who stream via Astro Ultra or Ulti Box will have the new app made available automatically, while customers who stream on personal devices will simply need to download the new Disney+ app to continue watching Disney+.

Existing customers can sign in using the same email address or mobile number associated with their existing Disney+ account.

For further information and support relating to the Disney+ app experience or app-related features, please visit the Disney+ Help Centre.

Yes, watching on the Astro Smart TV app will utilise one (1) of your Astro Go concurrency.

1. Open/Download the My Astro app or visit My Astro web.

2. Login with your Astro ID.

3. Go to Account.

4. Select 'Profile'.

5. Under Addresses, tap on the edit icon.

6. Select 'Approve' to update service address.

7. Select the Residential type and key-in the postcode, Tap 'Check'.

8. Key-in the Street, House number and Area.

9. Select 'No, I'm all set' and tap 'Proceed'.

10. Tap ' Confirm'.

11. A successful notification will be displayed.

If an error message on your TV has one of the following keywords:
- Switch to Continuous Viewing
- Service Currently Not Available (SCNA)
- (Code: SCNA)

You can proceed with the troubleshooting steps below if the weather is good. Otherwise, you may try again later.

STEP 1

On your remote, press the Home button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Settings.

STEP 3

Navigate to Satellite Settings and press OK.

STEP 4

Navigate to Diagnostics and press OK.

STEP 5

Refer to the signal strength on your screen.

If it is 65 or higher, please take the screenshot and submit your feedback form.

If it is below 65, please go to Step 6.

STEP 6

Switch off the power for your box and make sure that the adapter’s power light is off.

STEP 7

Unscrew the satellite cable from the box and pull it out.

STEP 8

Plug the satellite cable back into the box and screw it back securely.

STEP 9

Switch on the power for your box and make sure that the adapter’s power light is on. Please wait for 5 minutes.

STEP 10

Turn on your box. You should no longer be experiencing this issue.

If issue persist, please submit the issue on our Feedback Form with error details and attach a picture of your General tab of the STB Diagnostics for assistance.

Centralised Dish

If your Astro Box is connected to your apartment or condo building's centralised dish and the issue persists, please contact your respective Building Management before reaching out to our agents.

Please refer to the table below:

Note:

1. The table above is an approximation of the cancellation fee. The final fees will be calculated at the end of your subscription/upon downgrade.

1. Downgrade of Pack for Residential customers will be on basis of package ranking, whereas downgrade of pack for Astro & Broadband customer will be on basis of total monthly payment.

1. Package ranking in descending order:

• Platinum Pack (highest rank)
• Premium Pack 1/2/3 (same rank across 3 options)
• Entertainment / Sports / Movies Plus Pack
• Entertainment / Sports / Movies Pack (same rank across 3 options)
• Primary Pack (lowest rank)

Please find some examples (for Residential customers) as below:

Termination

Customer signed up for Entertainment Plus Pack (24-month contract) with Ultra Box. Customer decided to terminate the subscription 8 months into the contract. As the customer still has 16 months remaining, the maximum applicable fee will be RM41.67 x 16months = RM666.67

Pack downgrade

Customer signed up for Movies Pack (24-month contract) with Ultra Box. 18 months in, customer decides to downgrade to Primary Pack (24-month contract). As the customer still has 6 months remaining, the maximum applicable fee will be RM20.83 x 6months = RM125

Dropping off Netflix or Disney+ within first 12 months

Customer signed up for Entertainment Plus (24-month contract) with Ultra Box and 12-month commitment on Netflix App. 6 months in, customer decides to upgrade to Premium Pack 1 (24-month contract) which does not include Netflix App. As the customer still has 6 months remaining in the first 12 months of commitment for Netflix App, the maximum applicable fee will be RM41.67 x 6 months = RM250. Upon upgrading to Premium Pack 1, a new 12-month commitment for Disney+ App begins alongside the 24-month contract on the package.

Completing a CAPTCHA during activation is a standard security measure. It ensures that you are a real person and not an automated bot. This step helps protect your account from unauthorized access and ensures safe and secure use of the service. By verifying your identity, this step provides a better and more secure experience for all users

For Platinum Pack and Multiroom Smart TV customers, Astro GO+ will be automatically added to your subscription.

You may subscribe to add-ons via any of the platform listed below:

If your technical issue remains unresolved after completing the recommended troubleshooting steps or seeking assistance from customer support, a technician can be arranged to visit. The applicable charges are as follows:

i. In-contract customers: Free of charge (FOC)
ii. Out-of-contract customers: RM65 per visit.

You can access your WeTV VIP account on up to 2 devices at a time, including your Ultra/Ulti Box. To ensure a smoother streaming experience, please sign out from any unused devices.

Please refer to

How do I activate my Disney+ access with my Astro subscription?

If you have forgotten your Astro ID, you can easily retrieve it through the My Astro website or My Astro app by following these simple steps:

• Step 1: Visit https://id.astro.com.my/ and click on “Forgot Astro ID?”

• Step 2: Enter your Account Number or Smartcard Number. If you do not know where to find it, click on “Where to find your Account/Smartcard Number”

Note: Only Astro customers whose Astro ID is linked to their subscription can retrieve their Astro ID this way. Otherwise, you would need to create a new account.

1. Power reset (on & off) your TV, Astro Decoder, Modem and Router.

2. Ensure standard physical connection (No 3rd party devices connected to decoder and modem).

3. Please ensure at all-time your router is 0.5 meter away from your Astro Decoder to avoid signal interferences.

4. Please standby computer/laptop to access to the internet and connection must be via LAN (cable) [connect the LAN (cable) at any LAN port at router and direct to computer/laptop].

5. You may open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox and etc.

6. On the address bar, please go to http://www.speedtest.net/ and below page will appear.

7. Click "Change Server" to edit the settings preferred by Internet Service Provider (ISP).

8. Edit the server settings by search and select the required server required by ISP.

For Astro Fibre provider - Select Kuala Lumpur - Astro Fibre server.

For Maxis provider - Select Subang Jaya - Maxis server.

For Allo provider - Select Cyberjaya - Global Forway Sdn Bhd server.

9.Click "GO", and the test will begin.

The test is completed once both download and upload speeds are displayed.

Sample of the Speedtest result is shown below.

**Please ensure the snapshot includes a time stamp and network used either LAN cable or wireless (as per picture above)

10. Kindly screenshot or take a picture of the result, name it as "LAN Speedtest".

11. Repeat the test once again using Wi-Fi connection (Please unplug your LAN cable and connect via wireless connection using your SSID).

12. Screenshot or take a picture of the result, name it as "WiFi Speedtest".

If you are unable to scan the QR code displayed on your Smart TV, please use the alternative sign-in method:

1. On your mobile phone or computer, open a web browser and visit: https://astro.com.my/tvapp

Note: Ensure your mobile device/computer has an active internet connection and that you enter the code exactly as shown on the TV screen.

2. Enter the sign-in code displayed on your TV screen.

Landing screen on Smart TV

Landing screen on the Smart phone

3. Log in using your registered Astro ID.

4. Once successfully logged in, your Smart TV should automatically sign in and you can continue using the Astro Smart TV app.

If you are still having issues, proceed to submit report via WhatsApp or Feedback Form and provide:

• Astro ID use
• Smart TV model
• OS version
• Error reported on device

This will help our support team investigate and assist you further.

Multiroom discount rates will be removed upon splitting the account.

If you receive the "Device Was Not Found" error message, it may be because your device has been automatically removed due to concurrent streaming limits being exceeded.
Please perform the following checks and troubleshooting steps:

1. Stop streaming on one of the other devices currently using your Astro account.
2. Close the Astro Go app on any unused devices.
3. Return to your Smart TV and try streaming again.

If you are unable to remove a device or continue to see the error message, proceed to submit report via WhatsApp or Feedback Form and provide:

• Astro ID use
• Smart TV model
• OS version
• Error reported on device

This will help our support team investigate and assist you further.

Further details on pricing, billing and availability will be confirmed in coming months. Look out for more details and register your interest via https://astro.com.my/Netflix

Yes, a switching fee of RM 10 will be incurred when you unsubscribe from Sun NXT Premium or downgrade your subscription tier. However, for customers unsubscribing from Sun NXT Premium via Astro's Self-Service Portal, this fee will not apply.

Customers are given 90-days from their service termination date to return the Astro Box and SIM Card. If the box is not returned within this period, a “Box Fee” will be charged and appear as an itemized entry on their final bill when 90 days ended.

Here's how to refresh your smartcard in My Astro:

1. Open/Download the My Astro app or visit My Astro web
2. Login with your Astro ID
3. Go to Account
4. Tap on Subscription or TV pack
5. Tap on Rooms
6. For the box that you would like to refresh the smartcard, tap on 'Refresh' button. This will refresh your Astro box signal

📡 Experiencing technical issues?

📱 Download the My Astro app to:
- Perform self-troubleshoot
- Solve in a few minutes
- No need to call customer service

No, the Netflix 24-month ala-carte plans do not include an auto-renewal contract. After your contract has expired, you can continue to enjoy the discounted price as long as you maintain your Netflix subscription with Astro.

Yes, you can watch content on up to 4 different devices simultaneously using the same account. You can have 4 logged-in devices and 4 profiles, allowing for 4 concurrent streams.

STEP 1

Press any button on your Astro remote.

INDICATOR: LED blinking 3 times / NO LED blink

SOLUTION: Replace new battery

STEP 2

Check if you can change channel using your Astro remote control.

If issue remain after the battery replacement, try changing the channel manually directly from box front panel (If any).

If it's working, you might need to replace your Astro remote.

This might be due to a faulty Astro remote.

You may purchase it directly from Astro Exclusive Partners.

If confirm no issue with remote control, please refer to Decoder Hang at Channel troubleshooting steps here.

If you are currently receiving a paper bill, your billing delivery method will automatically switch to e-bill once your e-invoice request is accepted. This also means you'll be saving RM10 on paper bill fees. Please ensure that your email address is accurate.

Click here

if you wish to update your contact details.

Your account number will be used to identify/verify you for all After Sales-Services. You may also use your mobile number/ Astro smart card number/ NRIC number or Astro Box number.

Visit https://product.astro.com.my/box or check out our user guide for a quick and easy way to get started!

The Multi-user Profile feature allows customers to create individual profiles within their Astro Box and Astro GO with the following personalisation:

• Personalised Recommendations
• Continue Watching
• Watch List
• Last Viewed Channel
• Favourite & Blocked Channels

The MUP feature is a great way to allow individual users to tailor personal Astro experiences whilst using a shared device (e.g.: Astro Box) in the household, providing them with better personalised recommendations and encouraging better content discovery.

You may report the incident on WhatsApp at 03-95433838 by typing PNP and our dedicated agents will attend to your matter. Please have your Airway Bill tracking numbers ready for validation.

If a replacement box/Astro SIM card is deemed necessary, a new Plug &Play Box and a new Astro SIM card will be couriered to your service address.

There are few ways to get for your refund.
Click here for details:

If you are an Astro subscriber
Step 1: Launch the Astro Smart TV app on your Smart TV.

Step 2: Select “Log In”.

Step 3: Scan the QR code OR visit astro.com.my/tvapp and enter the code on the screen.

Step 4: Enter your Astro ID (registered email or mobile number) and password. If you do not have an Astro ID, click on “Create now”.

Step 5: Once you have successfully logged in, the Astro Smart TV app will refresh automatically, and you will be able to access it.

If you are NOT an Astro subscriber
Step 1: Launch the Astro Smart TV app on your Smart TV.

Step 2: Select “Subscribe Now”.

Step 3: Scan the QR code to visit https://www.astro.com.my/#main and explore Astro’s packs or Multiroom (Smart TV).

Step 4: Once you have successfully subscribed, kindly follow Step 1 – 5 under “If you are an Astro subscriber” to log in.

No, the eKYC verification process must be done by the individual themselves, using their MyKad and selfie in real-time.

Having trouble with your phone line ?

You may proceed to contact dedicated service provider directly - 1 800 8211 23

Customers who have activated the trial will be notified before it expires. They can choose to continue by subscribing at a price that will be disclosed later. If they are not interested, the trial will automatically expire after 2 months with no action required from them. Your Prime Video access will auto-expire, and you won’t be charged. However, please visit

https://product.astro.com.my/apps/primevideo

to stay updated on Prime Video.

Yes. Astro customers will soon be able to enjoy seamless access to Netflix on their connected Ultra and Ulti Boxes. Look out for more details then! Register your interest via https://astro.com.my/Netflix

No, you will not be able to manage your account with the Astro Fibre App. However, you may download the “MyAstro” app on your mobile device now to manage your Astro account in a fast and easy way.

Starting 21 June 2022, all new digital sign-ups for TV packs on astro.com.my will now include access to the Astro GO app within an hour upon checkout of your first month subscription fees (excluding tax). Install the app on your smartphones, tablets or computers and you can start streaming even before your Astro box arrives!

Mac OS X

1. Click the Go tab in the top menu bar and select Utilities from the drop-down menu.

2. Type "network utility" in the search bar in the top right-hand corner of the Utilities window and then hit the "Enter" key on your keyboard. 

5. For Traceroute Test, select the Traceroute tab and then type the address you like to traceroute in the text box. Click Trace and wait for the traceroute results.

Windows 10

1. Click the Search icon (magnifying glass) in the bottom left-hand corner and type "cmd" into the search bar.

2. Select the Command Prompt app - it will be at the top of the list of search results as the best match.

3. A black box with a flashing cursor will open; this is the Command Prompt.

For Ping Test, type "ping" and then hit the Space bar on your keyboard. Type in the address you like to ping and then hit the Enter key on your keyboard. Wait for the ping results.

For Traceroute Test, type "tracert" and then hit the Space bar on your keyboard. Type in the address you like to trace and then hit the Enter key on your keyboard. Wait for the tracert results.

Windows 7 & Vista

1. Open the Start menu by clicking the Windows icon at the bottom left-hand corner of the screen.

2. Type "cmd" in the search bar at the  bottom of the menu.

3. Click cmd found in the search results for Programs.

4. A black box with a flashing cursor will open; this is the Command Prompt.

For Ping Test, type "ping" and then hit the Space bar on your keyboard. Type in the address you like to ping and then hit the Enter key on your keyboard. Wait for the ping results.

1. Move the mouse to the right-hand corner of the screen to make the vertical menu bar (charm bar) appear. Click Search.

2. Type "cmd" in the search bar and hit the Enter key on your keyboard.

4. A black box with a flashing cursor will open; this is the Command Prompt.

For Ping Test, type "ping" and then hit the Space bar on your keyboard. Type in the address you like to ping and then hit the Enter key on your keyboard. Wait for the ping results.

Windows XP

1. Click the Start button in the bottom left-hand corner of the screen.

2. Click the Run option in the right-hand column.

For Ultra/Ulti Plug & Play Box installation, it is recommended that you attempt to self-install by following the installation guide here, but there is an option to request for an installer to install the box at your premise. However, there will be a separate fee for this service request.

If you have forgotten your username or password, you may follow the steps below:

Step 1. Go to netflix.com

Step 2: Click on Sign In

Step 3: Click on "Need Help

You will regain access to your channels on Astro immediately once the equipment has been installed at your new house, provided your account is active. Customers can still enjoy viewing via Astro Go.