If you’re facing issues updating your email address via My Astro, here’s how you can update your email address through your Set Top Box (STB).

Note: This method only works if you are on Ultra or Ulti box that is connected to the internet. If you are on an older box, kindly reach out to us via our Feedback Form.

1. Switch on your box and launch My Astro through the top menu or from the ‘Apps’ section.
2. Once you are in My Astro, press the yellow button on your Astro remote control to visit your ‘Account details’.
   
3. Press the down button to view ‘Personal info’.
   
4. Press the left button and focus on the edit icon for email address, press on "OK" to change your contact details.
   
5. To verify your identity, please enter the last 6 digits of the Astro account holder’s MyKad/Passport.
   
6. Please enter your new email address.
   
7. Please enter the OTP sent to the new email address.
   
8. Once the OTP is verified, your email address will be updated.
   

If you’re still unable to update your email address, kindly reach out to us via our Feedback Form and a representative from our team will get in touch to assist you soon.

If you have a random Astro power cable, remote control or old box lying around at home, you are required to discard them only at registered collection centres for proper handling and management of e-waste in an environmentally sound manner. Click here to find a registered collection centre near you.

For all recycling-related questions, please click here.

You can reschedule the collection appointment by calling our courier agent/installer directly.

You can proceed with below BTS if the weather is good. Otherwise, you may try again later.

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to SETTINGS.

STEP 3

Navigate to Satellite Settings and press “OK”.

STEP 4

Navigate to Diagnostics and press “OK”.

STEP 5

Refer to the signal strength on your screen.

If it is 65 or higher, please take the screenshot and submit your feedback form.

If it is below 65, please go to Step 6.

STEP 6

Switch off the power for your box and make sure that the adapter’s power light is off.

STEP 7

Unscrew the satellite cable from the box and pull it out.

STEP 8

Plug the satellite cable back into the box and screw it back securely.

STEP 9

Switch on the power for your box and make sure that the adapter’s power light is on. Please wait for 5 minutes.

STEP 10

Turn on your box. You should no longer be experiencing this issue.

If issue persist, please submit the issue on our Feedback Form with error details and attach a picture of your General tab of the STB Diagnostics for assistance.

Centralized Dish

If issue persist under a centralized satellite dish, please refer to your respective Building Management before contacting our agents.

1. Please use a LAN ethernet cable and connect your computer/laptop to the back of the Maxis Router.

2. You may open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox, etc.

3. On the address bar, please go to http://192.168.1.254 and the page below will appear.

The default login of the router as below. If you have done a configuration on your router and changed your password previously, please use the password you have previously set.

Username: administrator

Password: Router S/N (Available on the sticker at the back of the router)

4. Once you have successfully login, the router's web-based setup page will appear.

5. At the top of the page, click Wi-Fi Configuration to configure the Wi-Fi parameters.

6. You may change the Wi-Fi Name and the Password to follow your preferences, then click "Save" for the changes to take place.

Please reconnect to the new wireless name with the new password once completed.

SST of 6% and 8% will be applied accordingly to your bundle services:

1. 8% SST to Astro TV Pack
2. 6% SST to Astro Fibre

Payment via cheque will take 3 - 5 working days to be posted. If you require faster payment posting, we recommend you to pay online via Astro Quick Pay.

STEP 1
On your remote, press the Home button and the home menu will be displayed on your screen.

STEP 4
Navigate to Add Profile.

STEP 5
Choose your Profile.

STEP 6
Input the Profile Name and navigate to DONE.

STEP 7
Choose the Age Group of the new profile and press "OK".

STEP 8
Your new profile will be shown in the Profile Selection Screen.

No, your subscription will be terminated at the end of your Astro billing date. Until then, you will still be able to access ZEE5 premium.

There will be no installation fee for both Astro Box and Ultra Box. The Multiroom (second decoder) must be installed at the same registered address as your primary subscription.

For TV packs only, 24-months contract commitment period. However, if in addition to the TV packs, if you would like to also sign-up for Broadband, the contract commitment will be 24 months as well. If you're an existing customer, your existing remaining contract duration (if any) will not be carried over to the new contract except for existing Disney+ (3 Months Pack) and Multiroom subscription contract durations which will be carried over upon the migration to new packs.

Note: If you are subscribing to a bundle pack which includes Netflix or Disney+ for the first time, you are required to maintain the respective app as part of your bundle selection for a minimum of 12 months, otherwise a cancellation fee will apply.

Yes, customer may choose to have different billing method for each different account.

Physical bill charging will only apply to the account that has opted for paper bills.

Astro Cloud is a virtual storage that allows you to record and watch your favourite TV shows on Astro GO anytime, anywhere. Customers can enjoy 200 hours (500 GB) of cloud recording on Astro GO web and mobile app, and on your Astro Box (if applicable) at no additional cost.

To check your remaining Cloud storage space, go to Settings > My Devices, you will find your cloud storage information here.

You can upgrade your storage to a total of 1,500 hours (4000gb) with the Astro GO+ add-on for RM 5.99/month.

Kindly visit https://myastro.astro.com.my/ or call us at 03-7490 8102 to upgrade your storage plan.

No. There will be no changes to your monthly subscription fee as part of the refreshed channel lineup. You will continue to enjoy your current pack at the same price, along with the new channels and content additions.

If you’re an HBO Pack add‑on customer, you’ll continue paying the same RRP amount (depending on your subscription plan – Standard/Premium). If you’re on a combo plan / 50% discounted offer, you’ll keep to the discounted price until the promo expires. After the expiry, you may continue to subscribe to the HBO Max app as an ala carte add‑on via Astro from RM24.90/month.

The Malaysia Communication and Multimedia Commission (MCMC)has issued a directive to all telecommunication companies (telcos) to block the sending and receiving of SMS with URL links. The move is aimed at preventing users from becoming victims of online scams. This exercise is applicable for all person-to-person SMS with URL links sent to or received from local and international mobile numbers, which has already taken effect as of 2 May 2023.

e‑Invoice comes with several key benefits that can enhance your overall billing experience, including:

Greater convenience
Receive your invoice in a secure digital format and access it anytime. No printed bills are sent to your address.

Improved security
Each e‑Invoice comes with a validation link through IRBM’s system, helping ensure authenticity and reducing the risk of lost or tampered documents.

Better support for tax compliance
Digital invoices make it easier to submit the right documentation for tax purposes and ensure your records align with regulatory requirements.

More efficient record keeping
All invoices are stored digitally, making retrieval, tracking and financial reporting simpler.

Environmentally friendlier
Going digital helps reduce paper usage and contributes to sustainable, eco‑friendly practices.

Yes, however, we do advise keeping your subscription while your Smart TV is being fixed to avoid having to download the app again.

The Netflix subscription through Astro is subject to a minimum commitment period of 24 months (“Netflix Minimum Subscription Period”). If you choose to discontinue or terminate the subscription before the commitment period ends, a cancellation fee (“Netflix Early Termination Fee”) will apply. Additionally, downgrading your plan will involve a Switching Fee.

Option 1

1. Please turn off all devices (Modem and Router). By restarting your modem, you can isolate the possibility of overloaded processes in the modem, which would  impact its performance.    

2. Ensure the fiber cable from your wall socket and modem is securely connected.

Modem connection with Copper Cable

Notes: You might be connected to LAN 1 if backbone is Maxis

Router connection

3. Please make sure the LAN cable is connected properly from router (Port 1-4 - Yellow port) to PC/Laptop.

4. If the issue persists, submit your feedback form and attach your modem light indicator picture/video for further assistance.
 

Option 2/ Option 3/ Option 5/ Option 6

1. Please turn off all devices (Modem and Router). By restarting your modem, you can isolate the possibility of overloaded processes in the modem, which would  impact its performance.

2. Ensure the fiber cable from your wall socket and modem is securely connected.

Notes: You might be connected to LAN 1  if backbone is Maxis

Router connection

4. Please make sure the LAN cable is connected properly from router (Port 1-4 - Yellow port) to PC/Laptop.

5. Please make sure both cables on Router (Any Yellow port) and Astro Decoder (Network Port behind decoder) are properly inserted.

6. Switch on modem and router and please wait for 2 minutes to stabilise the devices after reboot.

7. If the issue persists, submit your feedback form and attach your modem light indicator picture/video for further assistance.

Option 4

1. Ensure Modem/Router are connected tightly to the power socket.

3. If the issue persists, submit your feedback form for further assistance.

You can access up to 3 concurrent screens, including your Ultra Box/Ulti Box. Each subscription allows you to register up to 5 devices. To ensure a smoother streaming experience, please sign out from any unused devices.

You can get your TIN from the

MyTax Portal

or visit the nearest IRBM branch.

STEP 1

On your remote, press the HOME button.

STEP 2

Navigate to Update Satellite Frequency and press “OK”.

STEP 3

Choose Test Satellite Frequency and press “OK”.

STEP 4

Select Yes, continue and press "OK" to start the test.

Otherwise, select No, go back to cancel.

STEP 5

Satellite Frequency Test progress screen will be displayed.

STEP 6

The test result will be displayed once completed.

Press "OK" to go back to channel.

There will be no penalty imposed upon the removal of Astro GO+ from your subscription.

If you have forgotten your username or password, you may follow the steps below:

Step 1. Go to netflix.com

Step 2: Click on Sign In

Step 3: Click on "Need Help

We want to ensure that only the authorised account owner can have access to their Astro account. This activity ensures that only you can log in and access all the details tied to your Astro account.

By changing from a higher contract duration e.g., 24-months commitment period to lower contract duration e.g., 12-months, a proration of the cancellation fee will be applicable whereby you will be charged per contract's month balance against the maximum cancellation fee agreed upon during sign up for the offer.

A proration of the cancellation fee will be applicable whereby you will be charged per contract's month balance against the maximum cancellation fee agreed upon during sign up for the offer.

You will start a new contract with 12-months commitment and receive the corresponding discount for that duration.

Check out how a cancellation fee is calculated with examples via this link:

You will be able to watch the same video on demand content on your Ultra/Ulti Box as the ZEE5 mobile app or website. However, ZEE5 live channels are currently not available on the Ultra/Ulti Box. Please stay tuned for updates!

No. We are rebranding our sports channel lineup for easy navigation of different sports categories, while maintaining the same content offerings. Hence, there will be additional channels to cater to all the sports content. Your subscription will not be affected, you will still be entitled to the sports content you’ve subscribed to.

Kindly download the Astro Smart TV app from your Smart TV’s app store and follow the steps on the screen to log in.

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to SETTINGS and press "OK".

STEP 3

Navigate to STB Diagnostics and press "OK".

STEP 4

Navigate to Network Diagnostics and press "OK" .

STEP 5

Please ensure the Tunes service multicast status is Multicast Up.

If the status is Multicast is Not Available, please reboot the decoder and router before verifying this status.

If issue persists, please submit the issue on our Feedback Form with error details and attach a picture of your Network Diagnostics.

f you decide to switch your existing Asian Favourites selection to Viu Premium, your current
selection will no longer be valid. This means that you will no longer be able to access any
channels or apps that is part of your current selection.

However, if you wish to remain with your existing Asian Favourites selection and enjoy Viu
Premium, please refer to Q8.

Moving forward, all customers on any Bundle which includes Movies Pack, those with the Movies Add‑On, customers subscribed to the HBO Pack Add‑On, as well as customers on the Astro One Epic Pack who wish to continue enjoying HBO content can subscribe to the HBO Max app as an ala carte add‑on via Astro from RM24.90/month.

You can access your WeTV VIP account on up to 2 devices at a time, including your Ultra/Ulti Box. To ensure a smoother streaming experience, please sign out from any unused devices.

As a VIP (Standard VIP or Premium VIP), you will be entitled to enjoy the benefits of the VIP subscription, including:

• Access to exclusive content only on iQIYI
• Early access to selected content episodes
• Where available, access to high definition (up to 1080P viewing quality) and surroundsound (Dolby Audio) versions of the Content
• The ability to skip advertisements
• Up to 2 concurrent viewing

Additionally, as a Premium VIP, besides the benefits mentioned above, you will also be entitled to the following benefits:

• Advance previewing of selected content episodes labelled as "locked"
• Where available, access to high definition (up to 4K viewing quality)
• Up to 4 concurrent viewing of VIP content, compared to only 2 concurrent viewing enjoyed by Standard VIP members

If you have more questions about these VIP privileges, please let us know by following these steps: "Profiles" > "Feedback". More privileges are in development for VIPs. Please stay tuned and join IQIYI as a VIP to enjoy these benefits.

To purchase Astro First easily, you can do it through My Astro. Here's how:

1. Download the My Astro app or visit My Astro web
2. Login using your Astro ID
3. Go to Astro Store > Astro First section
4. Select your preferred movie and click on rent
5. When your rental is confirmed, you will see details on which channel that you can watch your movie

Purchase via WhatsApp

1. Go to channel 480
2. Whatsapp the “movie code” to 03-9543 3838
3. Enter your “smart card number” (this is available on the top right corner of your tv screen)
4. Type “1” to confirm
5. The reply will direct you to the entitlement channel accordingly

Purchase via SMS

1. Go to channel 480
2. SMS the “movie code” to 32999
3. The SMS confirmation reply will direct you to the entitlement channel accordingly

*SMS service is available for Maxis, Celcom, Digi and U Mobile only.

From Beyond PVR On Demand interface:

1. Press the “Home” button on the Astro remote control
2. Select “On Demand” and press the “OK” button from the Astro remote control
3. Scroll to “Store” and search for the Movies/series
4. Select “Buy” and enter Pin Code.

From Ultra/Ulti On Demand interface:

1. Press the “Home” button on the Astro remote control
2. Scroll to the Store tab
3. Scroll to “Astro First: New Releases” or “Astro First: Blockbusters” and search for the Movies
4. Select “Rent” and enter Pin Code

From Astro Go app (purchases only applicable for Android devices):

1. Download the Astro Go app from the Google Play store.
2. Create an ID and link your account / proceed to log in if you have linked your account
3. Scroll to “Store” and search for “Astro First: New Releases” or “Astro First: Blockbusters”
4. Select “Rent” and enter Pin Code

*The default pin code is 0000 if you have not pre-set it.

🎁 Want to buy Astro First movies faster & track your rentals?

📱 Download the My Astro app to:
- Browse Astro First titles
- Rent in 1 tap
- Get reminders when new movies launch

Yes, if you terminate your existing Astro plan before the end of your contract period, an early termination fee will apply. This fee is calculated based on your subscribed package, remaining contract duration, and box type.

However, if you terminate your service after completing your contract period, no early termination fee will be charged.

Yes. To change the language, go to the app’s side menu, then go to Settings and select the preferred interface language.

Please ensure that you are using the correct ID for eKYC submission.

For Malaysians :

1. Please ensure you are using MyKad or MyTentera.

2. Capture the front and back of your ID.

3. Ensure that there is no glare when capturing the photo.

4. Ensure that are capturing it in a bright room to have the highest picture quality.

5. Please do not cover your ID when capturing it, as it may impact the OCR Optical Character Recognition accuracy.

For Malaysian Permanent Resident and Other Nationality :

1. Please use Passport only.

2. Please capture your whole passport, which has your personal information on it and your signature.

3. Ensure that there is no glare when capturing the photo.

4. Please do not cover your ID with your when capturing it, as it may impact the OCR Optical Character Recognition accuracy.

You can access your Viu Premium account on up to five (5) devices at a time. To ensure a
smoother streaming experience, please sign out from any unused devices.

E‑Invoicing is a fully digital version of your invoice that is created and shared electronically based on the Inland Revenue Board of Malaysia’s (IRBM) national e‑Invoicing requirement. Instead of using paper or manual documents, everything is processed digitally for a smoother and more secure billing experience.

There are no changes to your charges, but the way your invoice is generated becomes more efficient and in alignment with national tax requirements.

No, price for Astro customers will remain unchanged. Only the RRP price from iQIYI is changed.

1. Power reset (on & off) your TV, Astro Decoder, Modem and Router.

2. Ensure standard physical connection (No 3rd party devices connected to decoder and modem).

3. Please ensure at all-time your router is 0.5 meter away from your Astro Decoder to avoid signal interferences.

4. Please standby computer/laptop to access to the internet and connection must be via LAN (cable) [connect the LAN (cable) at any LAN port at router and direct to computer/laptop].

5. You may open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox and etc.

6. On the address bar, please go to http://www.speedtest.net/ and below page will appear.

7. Click "Change Server" to edit the settings preferred by Internet Service Provider (ISP).

8. Edit the server settings by search and select the required server required by ISP.

For Astro Fibre provider - Select Kuala Lumpur - Astro Fibre server.

For Maxis provider - Select Subang Jaya - Maxis server.

For Allo provider - Select Cyberjaya - Global Forway Sdn Bhd server.

9.Click "GO", and the test will begin.

The test is completed once both download and upload speeds are displayed.

Sample of the Speedtest result is shown below.

**Please ensure the snapshot includes a time stamp and network used either LAN cable or wireless (as per picture above)

10. Kindly screenshot or take a picture of the result, name it as "LAN Speedtest".

11. Repeat the test once again using Wi-Fi connection (Please unplug your LAN cable and connect via wireless connection using your SSID).

12. Screenshot or take a picture of the result, name it as "WiFi Speedtest".

All Astro equipment is property of Astro and as per our current Terms and & Conditions, customers are required to return them upon termination of Astro services.

STEP 1

Switch off the power for your box and make sure that the adapter's power light is off.

STEP 2

Locate the Smartcard at the front or right side and gently pull it out make sure that the adapter's power light is off.

STEP 3

Wipe the Smartcard's gold chip clean using a dry soft cloth.

STEP 4

Make sure the gold chip is facing upwards and reinsert it all the way in.

STEP 5

Switch on the power for your box and make sure that the adapter's power light is on.

Please wait for 5 minutes.

STEP 6

Turn on your box. You should no longer be experiencing this problem.

If issue persist, please submit your feedback form with error details and attach a picture of your sim card number for assistance.

Yes, watching on the Astro Smart TV app will utilise one (1) of your Astro Go concurrency.

You require at least two devices to form a Mesh WiFi network which are Astro Fibre WiFi router and a Mesh WiFi unit.

The Mesh unit will link to the WiFi router to form the Mesh WiFi network. You may connect up to 5 Mesh WiFi units for optimal WiFi coverage in your home.

You are attempting to play a content that is not part of your subscription. If you are not able to play a content that you are subscribed to, proceed to submit report via WhatsApp or

Feedback Form

.

If you are an Astro subscriber
Step 1: Launch the Astro Smart TV app on your Smart TV.

Step 2: Select “Log In”.

Step 3: Scan the QR code OR visit astro.com.my/tvapp and enter the code on the screen.

Step 4: Enter your Astro ID (registered email or mobile number) and password. If you do not have an Astro ID, click on “Create now”.

Step 5: Once you have successfully logged in, the Astro Smart TV app will refresh automatically, and you will be able to access it.

If you are NOT an Astro subscriber
Step 1: Launch the Astro Smart TV app on your Smart TV.

Step 2: Select “Subscribe Now”.

Step 3: Scan the QR code to visit https://www.astro.com.my/#main and explore Astro’s packs or Multiroom (Smart TV).

Step 4: Once you have successfully subscribed, kindly follow Step 1 – 5 under “If you are an Astro subscriber” to log in.

1. Please standby computer/laptop to access to the internet and connection must be via LAN (cable) [Connect the LAN (cable) to the yellow port in Maxis Router and direct to computer/laptop].

2. You may open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox and etc.

3. On the address bar, please go to http://192.168.1.254 and below page will appear.

If below box appear, please enter required details:

USERNAME: Administrator

PASSWORD: (ACCESS KEY AT THE RGW STICKER)

(These are the defaults, if you have done previous configuration on your router the password may be different)

4. Once enter into the page "'TECHNICOLOR TG784N V3'', you may follow below steps to get the best wireless channel information.

A. Select "Home Network".

B. Click "WLAN: SSID" to proceed to next screen.

C. In order to get the best wireless channel, click "Wireless Scan" to scan available surroundings wireless Channel.

D. Please choose channel with lesser number of usage.

Example in below case, you may choose channel 4.

5. To configure wireless channel, please proceed with below steps.

A. Select "Home Network".

B. Click "WLAN: SSID" to proceed to next screen.

C. Then, click "Configure" to change the channel selection (automatic to manual) and other configuration option.

D. Please ensure below items:

i. WLAN Enable: Tick

ii. Interface Enable: Tick

iii. Change the Channel Selection to Manual

iv. Change the wireless Channel based on Step 4(D).

v. Once completed the selection, click the "Apply" button.

Yes, you can. Click on Menu > Language and choose your preferred language. Then, click “SAVE”