STEP 1
Check the internet connectivity by run the Test Connection.
Refer Run Test Connection.

STEP 2
Verify the average speedtest based on the Test Connection result.
a. Above 10Mbps - Proceed to STEP 5
b. Less then 10 Mbps - Proceed to STEP 3

Notes: Minimum 10 Mbps internet speed from box requires in order to get a stable connection.

STEP 3
Check the connection to the box either using Ethernet (LAN cable) or Wi-Fi.
a. If using Ethernet (LAN cable) - Connect to Live Agent for help.
b. If using Wi-Fi - Proceed to STEP 4



STEP 4
Check location of the decoder and router.
a. If nearby (within 1.5m) - Try connect to box from router using LAN cable.
b. If far (more than 1.5m) / No LAN cable - Proceed STEP 5



STEP 5
Reboot router, modem and decoder.
If issue persist, please try again after 30mins to 1 hour. Connect to live agent if persist after 30 mins to 1 hour.

STEP 1

Check your current software version on your box.

If the software version updated (Refer to Table 1), proceed to STEP 2.

Table 1

If software version different from Table 1, click here for Software Update guide.

Once software is updated, tune to the impacted channel.

If issue persist, proceed to STEP 2.

STEP 2

Run Test Satellite Frequency.

Click here for the guide.

If Test Pass, proceed to submit report here.

Guide to submit report:

At Feedback Type select "I have missing channel".

Fill up all the required information and submit.

Please indicate if you agreed to recontract for 12 months (technical visit is FOC) or paid visitation (RM65).

You will receive appointment details via SMS within 48 hours.

If Test Fail, proceed to STEP 3.

STEP 3

Proceed to Update Satellite Frequency.

Click here for the guide.

Once completed, tune to the impacted channel.

If issue persist, proceed to submit report here.

Guide to submit report:

At Feedback Type select "I have missing channel".

Fill up all the required information and submit.

Please indicate if you agreed to recontract for 12 months (technical visit is FOC) or paid visitation (RM65).

You will receive appointment details via SMS within 48 hours.

1. Open/Download the My Astro app or visit My Astro web.

2. Login with your Astro ID.

3. Go to Add on Apps.

4. Under Apps categoty, tap Show more to show the full list of available Apps.

5. Select the require App to add-on and tap 'Proceed'.

6. Review order, select agreed and tap on 'Confirm order'.

7. Select 'Approve' to edit add-ons.

8. A confirmation order will be displayed and click 'Done' to close.

You will be able to view your new package(s) within 24 hours of subscribing. Please note that if you are an Astro customer subscribing to HD channels, you will have to connect an HDMI cable to your TV before you will be able to enjoy the channels.

Yes. Astro customers will soon be able to enjoy seamless access to Netflix on their connected Ultra and Ulti Boxes. Look out for more details then! Register your interest via https://astro.com.my/Netflix

Yes, you can watch content on up to 4 different devices simultaneously using the same account. You can have 4 logged-in devices and 4 profiles, allowing for 4 concurrent streams.

Yes, a charge of up to RM20.00 may be imposed upon reconnection.

Your bill will be waived upon request.

Your account may be under suspension. To resolve this issue, proceed to submit report via WhatsApp or

Feedback Form

.

1. Open/Download the My Astro app or visit My Astro web.

2. Login with your Astro ID.

3. Go to Pay Bill.

4. Tap on 'Pay now'.

5. Select the amount to be paid and tap on 'Proceed'.

6. Select 'Credit / Debit Card' as the payment method.

7. Fill in the card information.

8. Fill in your contact details, then tap 'PROCEED TO PAY'.

9. Your payment status will be displayed. Tap 'COMPLETE' to close the session.

10. A successful notification will be displayed.

If you are an Astro subscriber
Step 1: Launch the Astro Smart TV app on your Smart TV.

Step 2: Select “Log In”.

Step 3: Scan the QR code OR visit astro.com.my/tvapp and enter the code on the screen.

Step 4: Enter your Astro ID (registered email or mobile number) and password. If you do not have an Astro ID, click on “Create now”.

Step 5: Once you have successfully logged in, the Astro Smart TV app will refresh automatically, and you will be able to access it.

If you are NOT an Astro subscriber
Step 1: Launch the Astro Smart TV app on your Smart TV.

Step 2: Select “Subscribe Now”.

Step 3: Scan the QR code to visit https://www.astro.com.my/#main and explore Astro’s packs or Multiroom (Smart TV).

Step 4: Once you have successfully subscribed, kindly follow Step 1 – 5 under “If you are an Astro subscriber” to log in.

Yes, you can. On your Account tab, scroll and go to Subscription. Select Delivery status to track your delivery/installation or you may reach out to your installer agent for more assistance.

This feature is available on My Astro web and app version 6.2.5 and above.

Download My Astro app or visit the My Astro website.

You can reschedule the collection appointment by calling our courier agent/installer directly.

Yes. You are entitled to separate Netflix accounts for each main Astro subscription e.g. If you have subscribed to Entertainment Plus, Platinum Pack, etc separately. Therefore, if you have more than one main Astro subscription with Netflix, you may choose to create multiple email addresses to activate each respective Netflix subscription. Please follow the steps provided to you via email/SMS in order to activate your Netflix subscriptions on the website.

Please perform the following checks and troubleshooting steps:

1. Check if your TV supports the Astro app.
The Astro app is generally available on selected:

• Android TV / Google TV
• Samsung Smart TV (selected models)
• LG Smart TV (selected models)

Kindly check that your Smart TV supports the Astro Smart TV app (kindly refer here).
If your TV uses a different operating system (e.g., older proprietary OS), the Astro app may not be available.

2. Update your TV software.
Go to: Settings → Support → Software Update
Install any available updates, then restart the TV and try again.

3. Search the correct app store

• Samsung: Apps
• LG: LG Content Store
• Android/Google TV: Google Play Store

Search for "Astro" or "Astro GO" (depending on your region and service availability).

4. If your TV's region is set incorrectly, certain apps may not appear.
Look under: Settings → General → Location/Region
Ensure it matches your actual country.
If you are still having issues, proceed to submit report via WhatsApp or Feedback Form and provide:

• Astro ID use
• Smart TV model
• OS version
• Error reported on device

This will help our support team investigate and assist you further.

Customers who have lost their Ultra Box or Ulti Box will be charged RM 100 (exclusive of Sales and Service Tax).

You may report the incident on WhatsApp at 03-95433838 by typing PNP and our dedicated agents will attend to your matter. Please have your Airway Bill tracking numbers ready for validation.

If a replacement box/Astro SIM card is deemed necessary, a new Plug &Play Box and a new Astro SIM card will be couriered to your service address.

Simply South is a streaming service and one-stop destination for South Indian Regional Video Content. Simply South has the largest library of Tamil, Telugu and Malayam content with the latest movies, evergreen classics and comedy clips on-demand.

Astro customers with the Ultra or Ulti Box can access Prime Video via their Ultra/Ulti Box or stream directly using the Prime Video app. If you have not yet upgraded to Astro’s Ultra/Ulti Box, please reach out to us on WhatsApp by sending “Hi” to 03-9543 3838.

STEP 1

Try to change channels on your Astro remote. Check the LED light.
If the LED is blinking 3 times or if it is not blinking, replace the batteries and proceed to STEP 2.
Otherwise, if the LED is blinking 1 time, your remote is working fine, let's proceed to STEP 3.

STEP 2

Check if you can change channels using your Astro remote control. You should no longer be experiencing this problem if is a battery issue.
If issue remain after batteries replacement, proceed to STEP 3.

STEP 3

You need to refresh the box setting manually from the box front panel.
Refer to Refresh Box setting (Clear NVRAM) - Ultra / Ulti Box.
If issue persist, please submit the issue on our Feedback Form.

STEP 1

Press "HOME" button on your remote control.

STEP 2

Navigate to Settings and press "OK".

STEP 3

Navigate to STB Diagnostics and press "OK".

STEP 4

Take a look at the Smart Card Status.

If you are facing this error message on your PVR box when trying to perform actions like record, pause live TV or view recordings, follow below steps.

Note: PVR functionality is only available for Astro customers and is not supported for NJOI customers.

Check your hard disk connectivity.

STEP 1

On your remote, press the “HOME” button and the home menu will be displayed at the bottom of your screen.

STEP 2

Navigate to SETTINGS and press “OK”.

STEP 3

Navigate to STB DIAGNOSTICS and press “OK”.

STEP 4

From the General tab, take a look at the HDD Status.

If status is "Connected", press red button to reboot you decoder.

Wait until the box is on, then try to record any program.

If issue persist, please submit the issue on our Feedback Form and attach a picture of your General tab of the STB Diagnostics for assistance.

If status is "Disconnected", it is likely that the hard disk inside your PVR box is faulty.
Please note that the PVR Box has been discontinued, and you will receive an Ulti or Ultra Box for your replacement.
Submit your Feedback Form and attach a picture of your General tab of the STB Diagnostics for assistance.

You can recover your Netflix subscription  here.

Yes, you can check the status of your application through the My Astro website or app.

No. When you log in to the new Disney+ app using the same email address or mobile number associated with your existing Disney+ subscription, Disney+ will match the subscription linked to your account, so you can continue using your current subscription without duplicate billing.

STEP 1 On your remote, press the Home button and the Home Page will be displayed on your screen.

STEP 4 Navigate to Edit Profile.

STEP 5 Choose a profile to edit.

STEP 6 Choose a new Profile Picture and press “OK”.

The final bill will be generated on the next cycle date once Astro account has been terminated.

You can activate Disney+ through the following methods:

a. Astro Ultra or Ulti Box

b. My Astro app or web

c. Email

d. WhatsApp

Kindly refer to the steps below to activate:

Option A: Activate on Astro Ultra or Ulti Box

STEP 1

Click on the Disney+ app logo under the Apps rail on your Home page

STEP 2

Scan the QR code or visit the website on screen to activate via Disney's platform

STEP 3

Enter your email address

STEP 4

Enter your mobile number

Only applicable for activation through Mobile

STEP 5

Create your password

STEP 6

Enter your birthday

STEP 7

Click Proceed and log in to start watching Disney+ on your TV screen

Option B: Activate on My Astro app or web

STEP 1

Log in to My Astro app or web

STEP 2

Go to Manage Subscription → Add-ons

STEP 3

Click Activate now under the Disney+ add-on

STEP 4

Confirm the SecureGo request

STEP 5

Click on Proceed to activate via Disney's platform

STEP 6

Enter your email address

STEP 7

Enter your mobile number

Only applicable for activation through Mobile

STEP 8

Create your password

STEP 9

Enter your birthday

STEP 10

Log in to start watching Disney+

Option C: Activate via Email

STEP 1

Click on the Disney+ app icon in the activation email to activate via Disney's platform

STEP 2

Enter your email address

STEP 3

Enter your mobile number

Only applicable for activation through Mobile

STEP 4

Create your password

STEP 5

Enter your birthday

STEP 6

Log in to start watching Disney+

Option D: Activate via WhatsApp

STEP 1

Click on the Disney+ activation link in the WhatsApp activation message to activate via Disney's platform

STEP 2

Enter your email address

STEP 3

Enter your mobile number

Only applicable for activation through Mobile

STEP 4

Create your password

STEP 5

Enter your birthday

STEP 6

Log in to start watching Disney+

STEP 1

Switch OFF the power of your Ultra / Ulti box and make sure that the adapter's power light is off.

STEP 2

Switch ON the power of your Ultra / Ulti box and make sure that the adapter's power light is on.

STEP 3

On your remote control, press the standby button repeatedly until the Startup Options appear on TV.

STEP 4

Press "1".

STEP 5

Press "1" if your box setup under Satellite Mode.
Press "2" if your box setup under Plug and Play Mode.

STEP 6

The Software Update progress screen will appears.

The update will take 10 - 15 minutes to complete.

Please be patience.

As a rule of thumb, this issue might happen when the devices are not equipped with minimum requirement above that supports the subscribed internet speeds:

• WiFi technology
• Network Interface Card (NIC)

As mentioned above however, it is important to note that despite meeting the device minimum requirements, it is not a guarantee that devices connected over WiFi will be able to achieve maximum subscribed internet speeds due to the following:

1. Bad WiFi signal quality and coverage across the area due to:
   • Distance from the RGW/Mesh AP with connected device
   • Obstruction within the house (walls, metallic surfaces)
   • Interference with other household appliances
2. Congested bandwidth
   • If there are too many devices connected to the WiFi network, then the bandwidth might be overloaded with traffic hence, slowing down the speed
3. Devices are connected using WiFi instead of wired using LAN.
   • It is important to note that wired connection offers better reliability and speed over WiFi.
   • WiFi is more prone to interference compared to a wired connection which causes lower speeds and dropped signal.
4. Router Positioning: Most people underestimate the importance of picking a good spot for a Wi-Fi router. Even a small shift in positioning could end up being the difference between day and night:
   • High vs. Low: Put the router as high up as possible to extend the broadcasting range of the radio waves. This also helps clear the router of possible interferences.
   • Concrete & Metals: Make sure your router isn’t blocked by any other objects, especially devices that are electronic. Also, avoid placing your router in your basement as this area is usually enclosed by a lot of concrete, which can be almost impossible for Wi-Fi signals to penetrate.
   • Distance to Router: The further away from your router you get, the weaker the Wi-Fi signal. Therefore, the best option is to place your router as close to your devices as possible, but this is only practical if you have one main area where you tend to use your devices. Otherwise, you should place your router near the center of your home. After all, Wi-Fi broadcasts in 360 degrees, so it doesn’t make sense to put it at one end of the house.
5. Usage
   • More likely, however, is that the people on your network such as friends, roommates, or family members are participating in bandwidth-heavy activities like gaming and streaming Ultrabox/Netflix.
   • Fortunately, if this is the case, you can prioritize your own network traffic by enabling Quality of Service in your router settings.
   • If the problem persists, please run a Ping Test/Traceroute Test and attach the picture or screenshot of both test results in the Feedback Form below, in order for us to provide further assistances. Please make sure to attach the required screenshot(s) in ONE file (i.e. Microsoft Word document, PDF, Image file) before submitting the form.

Note:
Astro and its service providers will not offer any guarantees for compatibility of the customer's equipment (e.g., Personal Computer, Notebook, printers) nor provide on site troubleshooting for WiFi service issues related to the customer's equipment.

In support of the environment, customers are encouraged to opt for bill statements delivered for free via email or SMS for better savings as the Paper Bill Charge will be revised from RM7.00 to RM10.00 per bill/month, starting 1st August 2022. The Paper Bill Charge will be waived for customers who opt for e-Billing as their preferred bill delivery method.

If you experience constant loading or buffering while watching content on the Astro Smart TV app, please follow the steps below:

1. Update Your Smart TV Software

• Ensure your Smart TV is running the latest software or firmware version.
• Check for updates in your TV's Settings menu and install any available updates.

2. Restart Your Devices

• Turn off and restart the following devices:
  • Router
  • Modem (if applicable)
  • Smart TV
• Wait a few minutes for all devices to reconnect and stabilize.
• Relaunch the Astro app and test the VOD content again.

3. Clear the Astro App Cache

• Clear the application cache on your Smart TV.
• After clearing the cache, reopen the Astro app and check if the buffering issue has been resolved.

4. Reinstall the Astro App

• Uninstall the Astro app from your Smart TV.
• Download and install the latest version from your TV's app store.
• Launch the app and test any content again.

5. Still Experiencing Buffering Issues?

• Check whether other devices on the same network are heavily using the internet.
• Use a LAN cable for a more stable connection if possible.

If you are still having issues, proceed to submit report via WhatsApp or Feedback Form and provide:

• Astro ID use
• Smart TV model
• OS version
• Type of internet connection (Wi‑Fi or LAN)
• Screenshot/photo of the error message

This will help our support team investigate and assist you further.

HBO Max is a brand-new streaming service in Southeast Asia, Taiwan and Hong Kong, raising the bar for quality entertainment. Offering a collection of blockbuster movies, groundbreaking series, iconic hits, best-in-class real-life stories from food, home, lifestyle and documentary, as well as family favourites. Dive into beloved brands and franchises like HBO, Harry Potter, the DC Universe, Cartoon Network, Warner Bros., Discovery and beyond. HBO Max delivers exclusive stories and elevates the streaming experience.

Yes, customers may need to provide additional documents such as bank-in slips or payment receipts. For refund requests due to wrong payment, it is mandatory to provide proof of payment or a bank statement that shows the transaction and bank account details

STEP 1

Press "HOME" button on your remote control.

STEP 2

Navigate to Settings and press "OK".

STEP 3

Navigate to STB Diagnostics and press "OK".

STEP 4

Take a look at the HDMI Connection Status.

f you decide to switch your existing Asian Favourites selection to Viu Premium, your current
selection will no longer be valid. This means that you will no longer be able to access any
channels or apps that is part of your current selection.

However, if you wish to remain with your existing Asian Favourites selection and enjoy Viu
Premium, please refer to Q8.

Option 1

1. Please turn off all devices (Modem and Router). By restarting your modem, you can isolate the possibility of overloaded processes in the modem, which would  impact its performance.    

2. Ensure the fiber cable from your wall socket and modem is securely connected.

Modem connection with Copper Cable

Notes: You might be connected to LAN 1 if backbone is Maxis

Router connection

3. Please make sure the LAN cable is connected properly from router (Port 1-4 - Yellow port) to PC/Laptop.

4. If the issue persists, submit your feedback form and attach your modem light indicator picture/video for further assistance.
 

Option 2/ Option 3/ Option 5/ Option 6

1. Please turn off all devices (Modem and Router). By restarting your modem, you can isolate the possibility of overloaded processes in the modem, which would  impact its performance.

2. Ensure the fiber cable from your wall socket and modem is securely connected.

Notes: You might be connected to LAN 1  if backbone is Maxis

Router connection

4. Please make sure the LAN cable is connected properly from router (Port 1-4 - Yellow port) to PC/Laptop.

5. Please make sure both cables on Router (Any Yellow port) and Astro Decoder (Network Port behind decoder) are properly inserted.

6. Switch on modem and router and please wait for 2 minutes to stabilise the devices after reboot.

7. If the issue persists, submit your feedback form and attach your modem light indicator picture/video for further assistance.

Option 4

1. Ensure Modem/Router are connected tightly to the power socket.

3. If the issue persists, submit your feedback form for further assistance.

Please ensure that your mobile number is up to date in our database to ensure that payment reminders are sent to the right person.

You can do so via:

1. Astro Self-Service Portal

2. Call our Customer Call Centre (CCC)

**Only account holder can update the mobile number

Once the e-invoicing is activated, you cannot change your bill delivery method. If you do, your e-invoice will be automatically deactivated.

Starting 20 December 2022, Astro customers will be able to enjoy the iQIYI app as an add-to-bill service for an exclusive price via Astro and enjoy the app on their Ultra/Ulti Box, mobile app and website.

Watch this video or follow below steps to Connect to new Wi-Fi connection - Ultra Box / Ulti Box

Connect your Ultra Box/Ulti Box today and get the full value for your subscription. We believe we can provide you the best entertainment experience in Malaysia, and it all starts with connecting your box to the internet.

Want to enjoy these features for free?

• Continue watching Astro even when it’s raining.
• Binge-watch and catch-up to 110,000 videos on-demand from Malaysia, Hollywood, Korea, China, Bollywood and more anytime.
• Create multiple profiles in your house to enjoy a personalized Astro experience, with shows recommended to you based on your interest. There is a Kids-friendly version for your little ones as well.
• Rewind, pause and fast-forward shows and matches so that you will never miss another moment.

STEP 1
On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2
Navigate to Settings.

STEP 3
Scroll to Network Settings and press "OK". Select New Wi-Fi Connection and press "OK".

STEP 4
Select your Wi-Fi network and press "OK". Please enter the password to connect to your network.

STEP 5
You have successfully connected when this screen appears.

Although it is possible to pair the second mesh node unit with the first mesh, customers are advised to follow similar steps in setting up the Mesh Network by pairing the mesh unit with the WiFi router instead.

The Personal Video Recorder (PVR) is Astro's High Definition (HD)decoder which comes with a recording function and can be connected to Wi-Fi to access videos on demand. The PVR comes with the following features:

HIGH DEFINITION (HD):High Definition offers greater detail than Standard Definition including vibrant colour and multi-dimensional audio.

CONTROL LIVE TV: Record, Pause, Play & Rewind your favourite TV programmes at any moment. The PVR comes with storage capacity of 500GB (200 hours of HD recording)

ON DEMAND: Experience the new way of watching Astro. Gain access to a library of up to 50,000 On Demand titles that you can pick and watch instantly.

If your Astro service is suspended, your Disney+ subscription will be paused and will only resume once your Astro service has been reinstated.

If your Astro service is terminated, your Disney+ subscription through Astro will also be terminated.

Yes, you may enhance your existing pack with desired content, app and service add-ons via My Astro App or My Astro Web.

STEP 1: Log in using your Astro ID
STEP 2: Go to Account
STEP 3: Tap on Subscription
STEP 4: Tap on Add-ons
STEP 5: Tap on Manage your add-ons to view other steaming apps you are not subsribed to
STEP 6: Tap on the steaming app you wish to add on
STEP 7: Tap on Confirm Order

Please use your Astro ID that was registered with your Astro Fibre subscription to log in to the Astro Fibre App.

Huawei K562e

By default, the band steering featured is disabled. Follow these steps to enable it.

Note: Band Steering is called Dual-band Combination in the router web interface.

1. Please connect your computer or laptop to your Astro Fibre router using LAN cable. Your LAN cable must be connected from the yellow port of Astro Fibre router (Any available port).
2. Once connected, open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox and etc.
3. On the address bar, type http://192.168.100.254 and below page will appear.

Login using your username and password if you have changed the router login setting. Otherwise, your default router login is as per below.

Username: user
Password: user

4. Once you have successfully logged in, the router's web-based setup page will appear.

5. At the top of the page, click Wi-Fi to configure the WiFi parameters.

6. Click on Dual-band Combination button to enable the Band Steering.

7. A pop-up message will appear showing "The device network may be disconnected when dual-band combination is enabled". Click "OK" to proceed.

8. Set the Wi-Fi name and Wi-Fi password based on customer's preferences. Then click "Apply" for the changes to take place.

Please reconnect to the new Wi-Fi name with the new password once completed.

You can watch Disney+ through any of the following methods:

a. Astro Ultra and Ulti Box by launching the Disney+ app under the Apps rail on your Home page.

b. Personal devices (e.g. mobile phones, tablets and Smart TVs) by downloading the Disney+ app or visiting the Disney+ website.

You will need to log in using the credentials created during activation.

The payment will take some time to reflect in My Astro app and web account. If you experience any further issues or it is still not reflecting in My Astro, please reach out to us via WhatsApp at 03-9543 3838 for more details.

On the beIN SPORTS CONNECT mobile app:
Step 1: Open the "beIN SPORTS CONNECT" app and go to your Profile
Step 2: Select "Sign in with Astro" and log in with your Astro ID
Step 3: Go to "Settings" and select the TV Login option
Step 4: A QR code scanner will appear.