STEP 1
Check the internet connectivity by run the Test Connection.
Refer Run Test Connection.

STEP 2
Verify the Test Connection results.
a. All connected successfully - Proceed to STEP 3
b. All connection failed - Proceed to STEP 4
c. Router connection successfully, others failed - Proceed to STEP 7

STEP 3
Please ensure your box with the latest software update from "General Diagnostics".
Refer to Check Software Version Status.

If your box status is other than "Your box has the latest update (a)", please proceed to update the software.
Refer Software Update guide.

STEP 4
Check the connection to the box either using Ethernet (LAN cable) or Wi-Fi.
a. If using Ethernet (LAN cable) - Connect to Live Agent for help.
b. If using Wi-Fi - Proceed to STEP 5



STEP 5
Check location of the decoder and router.
a. If nearby (within 1.5m) - Try connect to box from router using LAN cable.
b. If far (more than 1.5m) / No LAN cable - Proceed STEP 6



STEP 6
Reboot router, modem and decoder.
If issue persist, please try again after 30mins to 1 hour. Connect to live agent if persist after 30 mins to 1 hour.

STEP 7
Suspect there is an issue with your internet connection.
Please check with your internet service provider or if under Astro Fibre / Astro Broadband, connect to Live Agent for help.

Netflix is a streaming entertainment service that offers a wide variety of award-winning TV programmes, films, anime, documentaries and more - on thousands of internet-connected devices. There's always something new to discover, and more TV shows and movies are added every month. The more you watch, the better Netflix gets at recommending TV shows and movies you'll love.

Astro customers with an internet-connected Ultra Box or Ulti Box can access the Netflix app and watch Netflix content via their Astro Box. For more information about Netflix, visit the Netflix website.

Redemption should be done by the account holder. However, if the account holder is unavailable, immediate family members can make the redemption provided that the account holder has given them the permission to redeem using his account credentials.

Please make sure that:

1. You are logging in with the correct registered Astro ID (email or phone number) and password. If you can’t remember your password, please proceed to use the “forget password” function.
2. You have an Astro ID that is linked to an Astro account. (note: NJOI – linked users will not be able to log into Astro GO)
3. Your Astro account is active and not under suspension.

If the above points have been met, you may try some quick solutions below:

1. Clear the cache on your browser or app.
2. Check if you have the latest version of the browser or app.
3. Log out and log back into the browser or app.
4. Relaunch the browser or app.
5. Restart your mobile device.
6. Restart your internet connection.

Bahasa Malaysia (BM) and Traditional Chinese subtitles will be available where rights permit. However, subtitle availability may vary depending on the title.

You can opt in to e‑Invoicing via the My Astro website or the My Astro app by following the steps below. Depending on your profile, you may be asked to provide additional details. Please scroll down to review the information required before proceeding.

Via the My Astro website:

1. Log in using your Astro ID.
2. Click Bills, scroll down to e-Invoice, and toggle it on.
3. You may need to enter your information (scroll down for more info) and click Acknowledgement to confirm.

Via the My Astro app:

1. Log in using your Astro ID.
2. Tap your account number or the default profile icon at the top left.
3. Scroll down to the Billing section, select e-Invoice, and turn the toggle on.
4. You may need to enter your information (scroll down for more info) and click Acknowledgement to confirm.

Details you may be required to provide:

The information required depends on your customer profile.

Note: You may obtain your TIN from the MyTax Portal or visitthe nearest IRBM branch

1. Open/Download the My Astro app or visit My Astro web.

2. Login with your Astro ID.

3. Go to Add on Apps.

4. Under Apps categoty, tap Show more to show the full list of available Apps.

5. Select the require App to add-on and tap 'Proceed'.

6. Review order, select agreed and tap on 'Confirm order'.

7. Select 'Approve' to edit add-ons.

8. A confirmation order will be displayed and click 'Done' to close.

You may switch to E-mail Billing or Paper bills to be notified of your bill and make payment. Kindly note that if you select to have Paper Bills, you will be charged a RM10 fee per bill.

Surcharge is imposed by 3rd party payment collection partners for services rendered. Kindly note that customers may be charged a surcharge per transaction when bill payments are made via the following methods:-

Bill payments at selected petrol stations, convenience stores, retail/mobile shops, kiosk, and e-wallets may incur a surcharge of up to RM0.50 per transaction by the appointed collection agencies of RMS (formerly known as Razer/MOL), ATX, MobilityOne, and e-Pay.

· To find out more on how to make your bill payments, click here.

Ultra Box with Contract:

Astro customers are entitled to a two (2) years manufacturer warranty and Installation warranty. During this period, after-sales service is free of charge. However, when your warranty period is over, all after-sales service is subject to a minimal service charge starting from RM65 inclusive of 8% Service Tax.

Other Decoders/Ultra Box Without contract:

Astro customers are entitled to a one (1) year manufacturer warranty and (6) months Installation warranty. During this period, after-sales service is free of charge. However, when your Installation warranty period is over, all after-sales service is subject to a minimal service charge starting fromRM65 inclusive of 8% service tax.

SecureGo: A transaction authentication alert that is sent to your registered device. With SecureGo, you can either approve or reject the transaction in a matter of seconds. 

WhatsApp OTP: OTP stands for One Time Password which is a 6-digit number that is sent to your mobile number via WhatsApp for verification purposes 

The number of concurrent streams depends on your Disney+ subscription plan:

a. Disney+ Standard: Up to 2 concurrent streams

b. Disney+ Premium: Up to 4 concurrent streams

Astro wants to give our members the convenience of having all their favourite series, exciting originals, vernacular signatures, live sports and local blockbuster movies in one place. Astro customers will be able to enjoy greater convenience by having Netflix bundled with their Astro subscription, consolidating the subscriptions, and providing easy access for payment in a single bill, at the best value.

Step 1: You request for a move - here's how.

Step 2: One of our agents will contact you within 24 hours to set an appointment if you’re using My Astro app.

Step 3: You will receive a reminder of your appointment an hour before your scheduled time.

Step 4: The technician will dismantle your satellite dish.

If there is no satellite dish, customers should dismantle the modem, router, and decoder by themselves.

Step 5: You will need to transport your device(s) to your new home.

Step 6: The technician will reinstall your satellite dish, (including modems and routers for broadband customers) at your new home based on the schedule appointment.

Note For IPTV Customers:

1. Upon relocation request, all exiting IPTV customers will be converted to our Astro & Broadband service. Customers can choose to have standard Astro service with satellite dish, or unicast Plug & Play without satellite dish.

2. If customers choose to have satellite dish, an additional RM150.00 will be charged for satellite installation. If customers choose to have unicast Plug & Play service, no satellite dish is required, hence no extra charge will be incurred.

Please reach out to the Simply South team by emailing them at [email protected] you have any enquiries or require assistance with the app.

If you would like to contact Astro, you may reach out to our Customer Service Centre by:

1. Submitting a feedback form here: www.astro.com.my/contactus/form; or
2. Reaching to us via WhatsApp by typing “Hi” at 03-9543 3838 for assistance

Yes, you will. Customers who purchased Astro First / Astro Best / Pay-per-View event in February 2024 with a viewing period in March 2024 will be charged an 8% Service Tax in their next bill.

Visit the app store on your Smart TV and search for the Astro Smart TV app to download it.

• Starting 1 March 2026 - Astro Showtime (CH 411), Rock Action (CH 414), and Rock X Stream (CH 415) will be available to customers
• Starting 1 April 2026 - Astro FAM Time (CH 412) will be available to customers

Astro sends regular payment reminders to customers via SMS until their current charges have been paid. However, we encourage customers to pay their bill as soon as possible to avoid disconnection of Astro service. Please reach out to us here if you require more information about payment reminders or to change your contact details.

If you need further help with the Astro Fibre app, you may call our Customer Contact Centre at 03 - 9543 1543 and an Astro agent will be available to assist you immediately.

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Settings.

STEP 3

Navigate to STB Diagnostics and press "OK".

STEP 4

Select General Diagnostics and press "OK".

STEP 5

Details information of General Diagnostics screen will be displayed.

STEP 6

Press down arrow on your remote to get more information.

You may register for auto-debit via:

1. My Astro website.

2. My Astro App

3.Any of our Astro Experience Store.

ZEE5 offers a wide range of exclusive content that is available only for ZEE5 premium members, which includes ZEE5 Originals, world-renowned Hollywood flicks, blockbuster Hindi cinemas, superhit regional movies across 18 different languages, American TV shows, documentaries, dubbed movies in regional languages and so much more. With a premium membership, you can enjoy all these exciting content with a seamless ad-free experience.

No, your subscription will be terminated at the end of your Astro billing date. Until then, you will still be able to access ZEE5 premium.

Customer can return the Ultra Box / Ulti Box by dropping to the nearest Astro Authorize Courier Partner and the adjustment will be made into the next bill once the box received.

If you would like more information or to provide feedback on Astro Rewards, kindly reach out to us at 03 9543 3838 or visit one of our Astro service centres.

Step 1: Launch Prime Video from application rail (under HOME page)

Step 2: Once redirected to the Prime Video app, Click the “Sign-in” button to proceed.

Step 3: Pair your Ultra Box/Ulti Box by scanning the QR Code.

Step 4: Sign-in using Prime Video account. If you have forgot your Prime Video username, sign in using Astro registered email or you can recover your Prime Video subscription here.

Step 5: After sign-in, choose your profile to proceed.

Step 6: Enjoy watching the content!

You will not be able to switch between channels, use the app as a remote control, view favorite channels and programmes, use programme showtime reminder, and remote record feature.

There will be no installation fee for both Astro Box and Ultra Box. The Multiroom (second decoder) must be installed at the same registered address as your primary subscription.

Byond Box (DMT 5)

STEP 1

Switch on the power for your box and make sure that the adapter's power light is on.

STEP 2

Put the box on standby mode.

STEP 3

Press and hold the Home button on the box.

STEP 4

Wait until "boot" appear on the front panel and released.

STEP 5

New Installation Settings page will appear.

Click here for the guides to complete the setup.

Byond Box (DMT 4)

STEP 1

Switch off the power of your box and ensure the adapter�s power light is off.

STEP 2

Switch on the power of your box and ensure the adapter�s power light is on.

STEP 3

Press and hold the Ch+ and Ch- keys on the box simultaneously when the "boot" message appears on the front panel.

STEP 4

Wait until the "Clr" message appears on the front panel, then release the Ch+ and Ch- keys.

STEP 5

New Installation Settings page will appear.

Click here for the guides to complete the setup.

Byond Box (Zapper)

STEP 1

Ensure your box is on standby mode. (Red light on box's front panel).

STEP 2

Press and hold the Standby button. Wait until the LED at front panel change from red to green for 3 times, then release the button.

STEP 3

New Installation Settings page will appear.

Click here for the guides to complete the setup.

Byond Box (New Zapper)

STEP 1

Switch off the power of your box and ensure that the adapter�s power light is off.

STEP 2

Switch on the power of your box and ensure that the adapter's power light is on.

STEP 3

Keep pressing the 'Power' button until the Startup Option screen appears.

STEP 4

Press "369" on the remote control to trigger refresh box setting menu.

STEP 5

Press "OK" to proceed. The box will be refreshed to the original setting.

STEP 6

New Installation Settings page will appear.

Click here for the guides to complete the setup.

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Settings.

STEP 3

Navigate to Menu Language and press "OK".

STEP 4

Navigate to your preferred language selection and press “OK”.

Yes, you can! Simply South is available for all Astro customers. Kindly reach out us via WhatsApp by typing “Hi” at 03-9543 3838 to know more!

Yes. All TVBAnywhere+ add-on plans; VOD Zone, Channel Zone, and Premium allow streaming on up to 2 devices concurrently. This means you can enjoy your favorite content on two devices at the same time.

The TVBAnywhere+ app offers over 40,000 hours of Chinese entertainment, including the latest drama series, variety shows, evergreen classics, and unlimited TVB originals that can be enjoyed anytime, anywhere. It also features exclusive dramas, known as TVBAnywhere+ Originals, such as

Ghost Cleansing Ltd

and

OPM

, which are available exclusively on the app. In addition, the app includes selected movie titles for on-demand viewing, providing more flexibility compared to the TVB channels on Astro.

Mesh WiFi technology greatly improves the WiFi network coverage within your home and virtually eliminates all WiFi “dead spots”. However, like all technologies there are limitations that you should be aware of.

The pairing of Mesh unit to the WiFi router is automatically handled between the WiFi router and the Mesh unit after it calculates its current position in relation to the WiFi router and surrounding Mesh unit (if available) already connected to the WiFi router.

If you are self-installing the mesh at your house, it is advisable for you to always pair the Mesh unit(s) with the WiFi router only regardless of how many Mesh unit available at your house.

Please note that if you have a Mesh connected to another Mesh, the expected performance of the WiFi speed will not perform as optimally as when compared to a Mesh connected directly to the WiFi router. Adding more points (also referred as Number of hops) in between your device to the WiFi router which will cause a reduction in bandwidth and add latency.

The Astro X3 packs are available to both new and existing Astro customers, making it easier for customers to enjoy a fully digital viewing experience. For existing Astro customers, subscribing to an Astro X3 pack under a 12-month contract will be treated as a new subscription, and a separate account will be created.

To manage this subscription, customers will need to register a new Astro ID using a new email address. This ensures a smooth and seamless self-service experience, with each subscription managed independently.

If you choose to opt out of SecureGo, please note that your authorisation method will not switch back to SMS OTP and transactions cannot be completed without SecureGo. You will receive a prompt to re-register for SecureGo when you need to authorise a transaction again. 

To de-register, follow these steps: 

Launch the My Astro app, tap the gear icon on top right of the screen to go to Manage. Under Settings, tap on SecureGo.

Step 1: Under SecureGo, tap the toggle to turn off/de-register 

Step 2: Tap Yes and your SecureGo will be de-registered.

1. Power reset (on & off) your TV, Astro Decoder, Modem and Router.

2. Ensure standard physical connection (No 3rd party devices connected to decoder and modem).

3. Please ensure at all-time your router is 0.5 meter away from your Astro Decoder to avoid signal interferences.

4. Please standby computer/laptop to access to the internet and connection must be via LAN (cable) [connect the LAN (cable) at any LAN port at router and direct to computer/laptop].

5. You may open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox and etc.

6. On the address bar, please go to http://www.speedtest.net/ and below page will appear.

7. Click "Change Server" to edit the settings preferred by Internet Service Provider (ISP).

8. Edit the server settings by search and select the required server required by ISP.

For Astro Fibre provider - Select Kuala Lumpur - Astro Fibre server.

For Maxis provider - Select Subang Jaya - Maxis server.

For Allo provider - Select Cyberjaya - Global Forway Sdn Bhd server.

9.Click "GO", and the test will begin.

The test is completed once both download and upload speeds are displayed.

Sample of the Speedtest result is shown below.

**Please ensure the snapshot includes a time stamp and network used either LAN cable or wireless (as per picture above)

10. Kindly screenshot or take a picture of the result, name it as "LAN Speedtest".

11. Repeat the test once again using Wi-Fi connection (Please unplug your LAN cable and connect via wireless connection using your SSID).

12. Screenshot or take a picture of the result, name it as "WiFi Speedtest".

If you can’t remember the email address or mobile number linked to your Disney+ account, please WhatsApp or call Astro’s Customer Service at +603 9543 3838.

For customers with the Ultra or Ulti Box, you will be charged a fee of RM100 (not inclusive of Govt. tax) upon confirmation of lost Astro Box and Smart Card/SIM Card.

For lost Smart Card/SIM card only, you may be charged RM50 to obtain a replacement.

Please check your internet speed and connection status via an internet connection test (https://www.speedtest.net/). If your internet is working fine and the issue persists, please try uninstalling and reinstalling the app on your device.

Once the e-invoicing is activated, you cannot change your bill delivery method. If you do, your e-invoice will be automatically deactivated.

1. Via Television

a) Ultra Box

• Press the “Home” button and scroll to “Settings” > “Wi-Fi/Ethernet” > “New Wi-Fi Connection”

• Allow the Ultra Box to scan the Wi-Fi networks available and subsequently choose your home Wi-Fi network > Enter your Wi-Fi password

• Once you are connected, your Home screen will now show “tabs” where you can now enjoy Video On Demand

• Choose the your favourites from “Movies”, “Kids” and more

2. Mobile/Portable devices

(a) Just head to the Google Play Store, Huawei App Gallery or Apple App Store here, search for “Astro GO” and download Astro GO on iOS and Android devices. Login to watch on demand and other ASTRO channels based on your subscription.

No, it is not necessary to change to one of the new packs. Customers can continue to enjoy the entertainment experience with their existing packs.

STEP 1

Check your current software version on your box.

If the software version updated (Refer to Table 1) , proceed to STEP 2.

If software version different from Table 1, click here for Software Update guide.

Table 1

Once software is updated, tune to the impacted channel.

If issue persist, proceed to STEP 2.

STEP 2

Run Test Satellite Frequency.

Click here for the guide.

If dCSS Scan Entrypoint Success, proceed to submit report here.

Guide to submit report:

At Feedback Type select "I have Astro service related question/request" and Sub Category as "Technical Interruption".

Fill up all the required information and submit.

Please indicate if you agreed to recontract for 12 months (technical visit is FOC) or paid visitation (RM65).

You will receive appointment details via SMS within 48 hours.

If dCSS Scan Entrypoint Fail, proceed to STEP 3.

STEP 3

Proceed to Update Satellite Frequency.

Click herefor the guide.
Once completed, tune to the impacted channel.

If issue persist, proceed to submit report here.

Guide to submit report:

At Feedback Type select "I have Astro service related question/request" and Sub Category as "Technical Interruption".

Fill up all the required information and submit.

Please indicate if you agreed to recontract for 12 months (technical visit is FOC) or paid visitation (RM65).

You will receive appointment details via SMS within 48 hours.

This error indicates that you are streaming on Astro GO while being connected to a VPN. Please close your VPN application and try streaming again.

If you are still having issues, proceed to submit report via WhatsApp or Feedback Form.

If you see either of these error messages below as in the image, it means your account has been temporarily locked after 3-time trial for security reasons. To resolve this issue and reset your account, please call Prime Video support team directly at

+1-206-577-1364

or

1-206-577-1364.

They’ll help you verify your identity and restore access.

Yes, you can! Kindly refer to the step above and log in with your Simply South details. However, kindly take note if you are interested to enjoy Astro’s exclusive pricing, you would need to discontinue your current Simply South subscription and resubscribe with Astro by sending us a WhatsApp message, “Hi” to 03-9543 3838.

STEP 1
On your remote, press the HOME button and the menu will be displayed on top of your screen.

STEP 5
Test Connection results will be displayed on the screen.

Customers will still be charged a penalty of RM 100 (exclusive of Sales and Service Tax), as per our terms and conditions, as the Astro Box & SIM Card are properties of Astro.