STEP 1
Check the internet connectivity by run the Test Connection.
Refer Run Test Connection.

STEP 2
Verify the Test Connection results.
a. All connected successfully - Proceed to STEP 3
b. All connection failed - Proceed to STEP 4
c. Router connection successfully, others failed - Proceed to STEP 7

STEP 3
Please ensure your box with the latest software update from "General Diagnostics".
Refer to Check Software Version Status.

If your box status is other than "Your box has the latest update (a)", please proceed to update the software.
Refer Software Update guide.

STEP 4
Check the connection to the box either using Ethernet (LAN cable) or Wi-Fi.
a. If using Ethernet (LAN cable) - Connect to Live Agent for help.
b. If using Wi-Fi - Proceed to STEP 5



STEP 5
Check location of the decoder and router.
a. If nearby (within 1.5m) - Try connect to box from router using LAN cable.
b. If far (more than 1.5m) / No LAN cable - Proceed STEP 6



STEP 6
Reboot router, modem and decoder.
If issue persist, please try again after 30mins to 1 hour. Connect to live agent if persist after 30 mins to 1 hour.

STEP 7
Suspect there is an issue with your internet connection.
Please check with your internet service provider or if under Astro Fibre / Astro Broadband, connect to Live Agent for help.

Please refer to these FAQs for more information, or click here to learn more and sign up for the Ultra Box. Alternatively, you may call 03-7481 8000 to get in touch with an Astro representative.

You can activate Disney+ through the following methods:

a. Astro Ultra or Ulti Box

b. My Astro app or web

c. Email

d. WhatsApp

Kindly refer to the steps below to activate:

Option A: Activate on Astro Ultra or Ulti Box

STEP 1

Click on the Disney+ app logo under the Apps rail on your Home page

STEP 2

Scan the QR code or visit the website on screen to activate via Disney's platform

STEP 3

Enter your email address

STEP 4

Enter your mobile number

Only applicable for activation through Mobile

STEP 5

Create your password

STEP 6

Enter your birthday

STEP 7

Click Proceed and log in to start watching Disney+ on your TV screen

Option B: Activate on My Astro app or web

STEP 1

Log in to My Astro app or web

STEP 2

Go to Manage Subscription → Add-ons

STEP 3

Click Activate now under the Disney+ add-on

STEP 4

Confirm the SecureGo request

STEP 5

Click on Proceed to activate via Disney's platform

STEP 6

Enter your email address

STEP 7

Enter your mobile number

Only applicable for activation through Mobile

STEP 8

Create your password

STEP 9

Enter your birthday

STEP 10

Log in to start watching Disney+

Option C: Activate via Email

STEP 1

Click on the Disney+ app icon in the activation email to activate via Disney's platform

STEP 2

Enter your email address

STEP 3

Enter your mobile number

Only applicable for activation through Mobile

STEP 4

Create your password

STEP 5

Enter your birthday

STEP 6

Log in to start watching Disney+

Option D: Activate via WhatsApp

STEP 1

Click on the Disney+ activation link in the WhatsApp activation message to activate via Disney's platform

STEP 2

Enter your email address

STEP 3

Enter your mobile number

Only applicable for activation through Mobile

STEP 4

Create your password

STEP 5

Enter your birthday

STEP 6

Log in to start watching Disney+

1. Please standby computer/laptop to access to the internet and connection must be via LAN (cable) [Connect the LAN (cable) to the yellow port in Maxis Router and direct to computer/laptop].
2. You may open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox and etc.
3. On the address bar, please go to http://192.168.1.254 and below page will appear.

The default login of the router as below. If you have done a configuration on your router previously, the password may be different.

Username: user
Password: Router S/N (Available on the sticker at the back of the router)

4. Once you have successfully login, the router's web-based setup page will appear. Please follow below steps for the configuration.

5. From the left menu, choose Wireless 2.4GHz and then click Basic Settings tab on the left menu to access to below screen.

6. You may change the Wireless Network Name (SSID) and the SSID Password to follow your preferences, then click "Save" for the changes to take place.

Please reconnect to the new wireless name with the new password once completed.

7. Since this is a dual band router, you will have 2 Wireless Network Names (SSID) i.e. 2.4GHz and 5GHz. You may connect to any of the SSID, preferably with a stronger signal available.

You may change the Wireless Network Name (SSID) and the SSID Password to follow your preferences for 5GHz by choosing Wireless 5GHz then click Basic Settings.

Click "Save" for the changes to take place and reconnect to the new wireless name with the new password once completed.

Yes, a charge of up to RM20.00 may be imposed upon reconnection.

To reconnect your Astro account, please check your Account status, Bill Summary and pay on Astro Quick Pay. Your disconnected services will resume within 1 hour after you have paid your "Total Overdue Charges"

You will not be able to switch between channels, use the app as a remote control, view favorite channels and programmes, use programme showtime reminder, and remote record feature.

1. Please use a LAN ethernet cable and connect your computer/laptop to the back of the Maxis Router.

2. You may open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox, etc.

3. On the address bar, please go to http://192.168.1.254 and the page below will appear.

The default login of the router as below. If you have done a configuration on your router and changed your password previously, please use the password you have previously set.

Username: administrator

Password: Router S/N (Available on the sticker at the back of the router)

4. Once you have successfully login, the router's web-based setup page will appear.

5. At the top of the page, click Wi-Fi Configuration to configure the Wi-Fi parameters.

6. You may change the Wi-Fi Name and the Password to follow your preferences, then click "Save" for the changes to take place.

Please reconnect to the new wireless name with the new password once completed.

If you are facing this error message on your PVR box when trying to perform actions like record, pause live TV or view recordings, follow below steps.

Note: PVR functionality is only available for Astro customers and is not supported for NJOI customers.

Check your hard disk connectivity.

STEP 1

On your remote, press the “HOME” button and the home menu will be displayed at the bottom of your screen.

STEP 2

Navigate to SETTINGS and press “OK”.

STEP 3

Navigate to STB DIAGNOSTICS and press “OK”.

STEP 4

From the General tab, take a look at the HDD Status.

If status is "Connected", press red button to reboot you decoder.

Wait until the box is on, then try to record any program.

If issue persist, please submit the issue on our Feedback Form and attach a picture of your General tab of the STB Diagnostics for assistance.

If status is "Disconnected", it is likely that the hard disk inside your PVR box is faulty.
Please note that the PVR Box has been discontinued, and you will receive an Ulti or Ultra Box for your replacement.
Submit your Feedback Form and attach a picture of your General tab of the STB Diagnostics for assistance.

Prime Video is available as an add-on to all Astro customers at RM25 per month (tax included). However, Prime Video is available to the following Astro customers at no additional cost:

• Customers on the Ultra/Ulti Box with either the Astro One Epic Pack or Movies Pack as part of their subscription bundle.
• Customers not on the Ultra/Ulti Box but subscribed to either the Astro One Epic Pack or the Movies Pack as part of their subscription bundle, starting 24 June 2025.

Below are the details of the Sun NXT pricing options for Astro customers.

No, your subscription will be terminated at the end of your Astro billing date. Until then, you will still be able to access your WeTV VIP account.

Yes, Astro is bounded by the PDPA act. All information received will be used in accordance with our Privacy Notice.

Kindly note that not all Astro & Broadband Devices are required to be returned. After service termination of your Astro & Broadband service, we will call you via your registered mobile number within 3 days to schedule a pickup appointment with our Astro agent if your device needs to be returned.

If you were not contacted within 3 working days to return your devices, you are required to discard your old Astro & Broadband devices only at registered collection centres for proper handling and management of e-waste in an environmentally sound manner. Click here to find a registered collection centre near you.

Frequently Asked Questions

1) I missed the pickup appointment; what do I do now?

You can reschedule the pick-up appointment by calling our agent directly.

2) Can I reschedule my pickup date?

Yes! You can call our agent back directly to reschedule the pickup date and time.

3) Do I have to pack my device(s) before handing it over to the Astro agent?

Our Astro agent will dismantle the devices for you. However, if your devices are already dismantled, please pack them in their original box/packaging if possible. If this option is not available to you, just hand the device(s) over to the Astro agent without any packaging. You will not be charged any fees if the original packaging has been damaged/lost.

4) Do I have to print anything or fill in any forms before handing my device(s) over to the Astro agent?

No, you do not have to prepare any documents before handing your device(s) over to the Astro agent! All you have to do is get your device(s)ready before the Astro agent arrives to ensure a smooth handover process.

5) I have the Astro & Broadband router and modem to return, however, the cable(s) that come with them are damaged/lost; will there be any penalty fees?

No, please return your old Astro & Broadband modem and its power supply unit (PSU). There will be no penalty fees if the cable is damaged or lost.

Recycle via Registered Collection Centres

For all recycling-related questions, please click here.

Of course! Please ensure your account is active when requesting for a move.

Existing Netflix add-on customers will be notified prior to their next bill cycle via email.

No, your Viu app is accessible within Malaysia only.

Zee5 is the only app that has a change in price upon the SST increase. Prices of Netflix, Disney+ , Viu, iQIYI, WeTV and Qalbox will not be affected.

Yes, you will need to activate SecureGo again if you're on a new device.

When you activate SecureGo on a different device, you will receive an email to notify you that the device has been de-registered. 

If you suspect that someone else has gained access to your phone, contact our customer service immediately at 03-9543 3838 to unlink your Astro ID. 

No, you will not be automatically switched to the new pricing. To perform a manual switch, please contact us at 03-9543 3838.

Yes, you may change the interface language of the app. To access the language settings, please click "Profile" > "Settings" > "Language" and select your preferred language

Yes, you may submit for the termination of account, but it is subjected to an Early Termination Fee (ETF) based on the remaining contract.

No, the quality of your video depends on the speed and reliability of your internet.

Yes, eKYC verification is mandatory. In addition, this verification process helps to reduce manual handling of customer's personal information and secure against unauthorised usage.

Option 1

1. Please turn off all devices (Modem and Router). By restarting your modem, you can isolate the possibility of overloaded processes in the modem, which would  impact its performance.    

2. Ensure the fiber cable from your wall socket and modem is securely connected.

Modem connection with Copper Cable

Notes: You might be connected to LAN 1 if backbone is Maxis

Router connection

3. Please make sure the LAN cable is connected properly from router (Port 1-4 - Yellow port) to PC/Laptop.

4. If the issue persists, submit your feedback form and attach your modem light indicator picture/video for further assistance.
 

Option 2/ Option 3/ Option 5/ Option 6

1. Please turn off all devices (Modem and Router). By restarting your modem, you can isolate the possibility of overloaded processes in the modem, which would  impact its performance.

2. Ensure the fiber cable from your wall socket and modem is securely connected.

Notes: You might be connected to LAN 1  if backbone is Maxis

Router connection

4. Please make sure the LAN cable is connected properly from router (Port 1-4 - Yellow port) to PC/Laptop.

5. Please make sure both cables on Router (Any Yellow port) and Astro Decoder (Network Port behind decoder) are properly inserted.

6. Switch on modem and router and please wait for 2 minutes to stabilise the devices after reboot.

7. If the issue persists, submit your feedback form and attach your modem light indicator picture/video for further assistance.

Option 4

1. Ensure Modem/Router are connected tightly to the power socket.

3. If the issue persists, submit your feedback form for further assistance.

Streaming app entitlement is dependent on the TV Pack you are subscribed to, with some streaming apps available on Astro as an add-to-bill service. Please visit product.astro.com.my/apps to see if you are entitled to your favourite streaming app once it is launched!

STEP 1

Press any button on your Astro remote.

INDICATOR: LED blinking 3 times / NO LED blink

SOLUTION: Replace new battery

STEP 2

Check if you can change channel using your Astro remote control.

If issue remain after the battery replacement, try changing the channel manually directly from box front panel (If any).

If it's working, you might need to replace your Astro remote.

This might be due to a faulty Astro remote.

You may purchase it directly from Astro Exclusive Partners.

If confirm no issue with remote control, please refer to Decoder Hang at Channel troubleshooting steps here.

Yes, you can! Kindly refer to the step above and log in with your Simply South details. However, kindly take note if you are interested to enjoy Astro’s exclusive pricing, you would need to discontinue your current Simply South subscription and resubscribe with Astro by sending us a WhatsApp message, “Hi” to 03-9543 3838.

Effective from the bill date 9th July 2024 onwards, the Service Tax for the Broadband Bundle/Fibre Bundle will be streamlined at a rate of 6%. The prorated adjustment for your Pay TV subscription will be calculated based on 6% service tax rate on your next bill, following your current subscription's tax rate.

Starting 21 June 2022, all new digital sign-ups for TV packs on astro.com.my will now include access to the Astro GO app within an hour upon checkout of your first month subscription fees (excluding tax). Install the app on your smartphones, tablets or computers and you can start streaming even before your Astro box arrives!

This error indicates that you have reached the maximum number of simultaneous video streams across devices for one (1) account. To stop seeing this error, please stop streaming on one of your other devices.

• If you have recently purchased your Astro pack or made any changes to your pack on or after 9th November you can stream on two (2) concurrent screens

• If you have not made any changes you can stream on four (4) concurrent screens.

If you are still having issues, proceed to submit report via WhatsApp or Feedback Form.

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Settings.

STEP 3

Navigate to Satellite Settings and press "OK".

STEP 4

Select Diagnostics and press "OK".

STEP 5

Select Diagnostics and press "OK". Signal reading will be displayed. Navigate to "Done" and press "OK" to complete the diagnostics.

Astro X3’s no-contract option is part of our upcoming offering to give customers greater flexibility and control over their viewing experience.

It is designed with simplicity and ease in mind—allowing customers to sign up, pause, or cancel at any time. More details on how it works and what’s included will be shared soon.

Stay tuned for updates!

You will still need to authorise the transaction from your SecureGo registered device. 

Step 1: On another device, perform the transaction via My Astro app 

Step 2: Tap on the push notification you receive on your SecureGo registered device 

Step 3: Tap Approve or Reject to authorise the transaction, and you're done! 

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to SETTINGS and press "OK".

STEP 3

Navigate to STB Diagnostics and press "OK".

STEP 4

Navigate to Network Diagnostics and press "OK" .

STEP 5

Please ensure the Tunes service multicast status is Multicast Up.

If the status is Multicast is Not Available, please reboot the decoder and router before verifying this status.

If issue persists, please submit the issue on our Feedback Form with error details and attach a picture of your Network Diagnostics.

There will be no changes to your HBO Max app subscription. You can continue accessing the app as usual. However, due to Warner Bros. Discovery (WBD) and Astro's partnership model going forward, the HBO HD (CH 411), Cinemax HD (CH 412), HBO Family (CH 414) and HBO Hits (CH 415) channels will cease on Astro at 11:59 PM on 28 February 2026.

You will be able to enjoy all the content on the iQIYI app immediately upon successful purchase from the Astro website. You may enjoy your VIP privileges from the iQIYI app on your Ultra Box, Ulti Box, mobile devices (Android & iOS), Apple TV, Android TV, as well as on Web (www.iq.com).Please ensure that the account used to log in to the app is the same one used to purchase your iQIYI VIP subscription.

The Ultra Box or Ulti Box and the SIM Card are property of Astro, as per our General Terms and Conditions for Astro Services. Therefore, customers are accountable for returning the boxes upon the termination of their Astro subscription. Otherwise, an RM100 (exclusive of Sales and Service Tax) box fee will be charged to the customer's account.

Yes, customers will be charged 8% Service Tax on switching fee for any services rendered on or after 1st March 2024.

Multiroom discount rates will be removed upon splitting the account.

Mac OS X

1. Click the Go tab in the top menu bar and select Utilities from the drop-down menu.

2. Type "network utility" in the search bar in the top right-hand corner of the Utilities window and then hit the "Enter" key on your keyboard. 

5. For Traceroute Test, select the Traceroute tab and then type the address you like to traceroute in the text box. Click Trace and wait for the traceroute results.

Windows 10

1. Click the Search icon (magnifying glass) in the bottom left-hand corner and type "cmd" into the search bar.

2. Select the Command Prompt app - it will be at the top of the list of search results as the best match.

3. A black box with a flashing cursor will open; this is the Command Prompt.

For Ping Test, type "ping" and then hit the Space bar on your keyboard. Type in the address you like to ping and then hit the Enter key on your keyboard. Wait for the ping results.

For Traceroute Test, type "tracert" and then hit the Space bar on your keyboard. Type in the address you like to trace and then hit the Enter key on your keyboard. Wait for the tracert results.

Windows 7 & Vista

1. Open the Start menu by clicking the Windows icon at the bottom left-hand corner of the screen.

2. Type "cmd" in the search bar at the  bottom of the menu.

3. Click cmd found in the search results for Programs.

4. A black box with a flashing cursor will open; this is the Command Prompt.

For Ping Test, type "ping" and then hit the Space bar on your keyboard. Type in the address you like to ping and then hit the Enter key on your keyboard. Wait for the ping results.

1. Move the mouse to the right-hand corner of the screen to make the vertical menu bar (charm bar) appear. Click Search.

2. Type "cmd" in the search bar and hit the Enter key on your keyboard.

4. A black box with a flashing cursor will open; this is the Command Prompt.

For Ping Test, type "ping" and then hit the Space bar on your keyboard. Type in the address you like to ping and then hit the Enter key on your keyboard. Wait for the ping results.

Windows XP

1. Click the Start button in the bottom left-hand corner of the screen.

2. Click the Run option in the right-hand column.

If you have NOT made any changes to your Astro pack on or after 9th November 2021, you can enjoy up to four (4) concurrent streams on Astro GO anywhere, anytime. However, if you have Astro GO+ as part of your subscription, you will be upgraded to four (4) concurrent streams.

The WiFi SSID and password of the Mesh unit will be automatically synchronized to the WiFi router. Hence, there is no need to configure the WiFi parameters.

*WiFi SSID (Service Set Identifier) is the name of your wireless network, also known as Network ID. It is viewable to anyone with a wireless device within reachable distance of your network.

If you have a random Astro power cable, remote control or old box lying around at home, you are required to discard them only at registered collection centres for proper handling and management of e-waste in an environmentally sound manner. Click here to find a registered collection centre near you.

For all recycling-related questions, please click here.

Huawei K562e

By default, the band steering featured is disabled. Follow these steps to enable it.

Note: Band Steering is called Dual-band Combination in the router web interface.

1. Please connect your computer or laptop to your Astro Fibre router using LAN cable. Your LAN cable must be connected from the yellow port of Astro Fibre router (Any available port).
2. Once connected, open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox and etc.
3. On the address bar, type http://192.168.100.254 and below page will appear.

Login using your username and password if you have changed the router login setting. Otherwise, your default router login is as per below.

Username: user
Password: user

4. Once you have successfully logged in, the router's web-based setup page will appear.

5. At the top of the page, click Wi-Fi to configure the WiFi parameters.

6. Click on Dual-band Combination button to enable the Band Steering.

7. A pop-up message will appear showing "The device network may be disconnected when dual-band combination is enabled". Click "OK" to proceed.

8. Set the Wi-Fi name and Wi-Fi password based on customer's preferences. Then click "Apply" for the changes to take place.

Please reconnect to the new Wi-Fi name with the new password once completed.

Follow the steps below to access the TVBAnywhere+ app on your Ultra/Ulti box:

• Step 1: On the Home menu, go to the app rail and select TVBAnywhere+. A screen with Pair TVBAnywhere+ TV App and a QR code will appear.
• Step 2: Scan the QR code with your mobile device. This action will open the TVBAnywhere+ login page on your phone.
• Step 3: Click on the Astro logo from the partner picker list and login with your Astro ID.
• Step 4: The TVBAnywhere+ app will now launch. Select the ‘Me’ icon to open your profile.
• Step 5: Choose Pair with TV App on the profile page.
• Step 6: A pairing code will appear on your TV. Enter this code on your mobile device and click OK. The TV screen will refresh, and the TVBAnywhere+ homepage will appear.

Complimentary access to the Sun NXT Lite app is only available to Indian Favourites/Maharaja Pack customers. To get an access to Sun NXT Lite, you must be an existing Astro customer with a subscription to Indian Favourites/Maharaja Pack.

STEP 1 On your remote, press the Home button and the Home Page will be displayed your screen.

Upgrade to Sun NXT Premium via www.astro.com.my/sunnxt or the MyAstro app. For further assistance, contact our customer service at 03-9543 3838.

Huawei K562e

1. Please connect your computer or laptop to your Astro Fibre router using LAN cable. Your LAN cable must be connected from the yellow port of Astro Fibre router (Any available port).

2. Once connected, open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox and etc.

3. On the address bar, type http://192.168.100.254 and below page will appear.

Login using your username and password if you have changed the router login setting. Otherwise, your default router login is as per below.

Username: user

Password: user

4. Once you have successfully logged in, the router's web-based setup page will appear.

5. At the top of the page, click More to configure the WiFi parameters.

6. From the left menu, select WLAN and choose Wi-FI Advanced Network to access the screen below.

7. To change the channel on 2.4 GHz and 5 GHz, click the drop-down arrow for Channel, then select your desired channel.

8. Then, click "Apply" for the changes to take place.