If you see either of these error messages below as in the image, it means your account has been temporarily locked after 3-time trial for security reasons. To resolve this issue and reset your account, please call Prime Video support team directly at

+1-206-577-1364

or

1-206-577-1364.

They’ll help you verify your identity and restore access.

Transfer of Equipment Ownership

A request to transfer the equipment’s ownership from the existing account holder to a new account holder.

Note: Transfer of Equipment Ownership is not applicable for Astro Broadband (Maxis, TIME, Allo), standalone Astro Fibre and NJOI account.

Merge of Equipment

A request from the account holder to merge the equipment from two different accounts into one account, provided the equipment must be within the same service address and registered under the same accountholder’s name.

Split of Equipment

A request from the account holder to split the equipment from one account to two different accounts and registered under the same account holder’s name.

Yes, customers who have upgraded their packages or reconnected their Astro service in February 2024 will be charged with 8% Service Tax from 1st March 2024, for services period on or after 1st March 2024.

BYOND / PVR / Ultra Box

To dismantle ONLY - FOC

To reinstall ONLY – RM65

To dismantle and reinstall - RM65

Broadband / IPTV

Relocation within 6 months of contract start will be charged a RM500.00 relocation fee, and the contract will be renewed to a new 24-month contract.

Relocation after 6 months of contract start will have their contract renewed to a new 24-month contract.

Note For IPTV Customers:

1. Upon relocation request, all exiting IPTV customers will be converted to our Astro & Broadband service. Customers can choose to have standard Astro service with satellite dish, or unicast Plug & Play without satellite dish.

2. If customers choose to have satellite dish, an additional RM150.00 will be charged for satellite installation. If customers choose to have unicast Plug & Play service, no satellite dish is required, hence no extra charge will be incurred.

*Please note that additional charges may apply if the reinstallation process requires extra cables/fixings.

You will be charged 8% Service Tax on Astro Pay TV services rendered on or after 1st March 2024, whereas your Astro Fibre including Mesh will remain at 6% Service Tax.

For customers that would like to subscribe to Multiroom with a box installation,

(i) customers on the old packages (example Family Pack, Starter Pack, Value Pack, Super Pack or Super Pack Plus) will have to subscribe to our new packages first by sending "Switch" to 03-9543 3838 via WhatsApp;

(ii) customers on the new Astro packages can subscribe by visiting product.astro.com.my/multiroom or WhatsApp "Hi" to 03-9543 3838.

Yes, a third party is allowed to make the advance payment on your behalf. In the case of refund, the amount will be returned to the owner of the third-party account (source of payment).

Yes, your information will still be available in the HBO Max app if you choose to sign in using the same email address as your current Astro login.

Astro GO is free for all Astro customers to enjoy their favourite shows and channels on their smartphones, tablets, and computers – anytime, anywhere in Malaysia. Astro customers with an active Pay-TV subscription can link their accounts to watch corresponding On Demand and TV channels available on Astro GO as part of their subscription.

Don't have an Astro account? Fret not, you may still preview and browse content available on Astro GO via Web, Mobile Phone or your tablet using Astro GO Guest Mode.

STEP 1

Press "HOME" button on your remote control.

STEP 2

Navigate to Settings and press "OK".

STEP 3

Navigate to Installation Settings and press "OK".

STEP 4

Enter your PIN to access this setting. (Default PIN is 0000).

STEP 5

Navigate to Restore Factory Settings and press "OK".

STEP 6

Navigate to Yes, continue and press "OK" to confirm your selection.

Otherwise, navigate to No, go back to maintain the settings.

STEP 7

Please reboot your box.

STEP 8

New Installation Settings screen will appear.

Click here to follow New Installation Settings guide.

STEP 1

Press "HOME" button on your remote control.

STEP 2

Navigate to Update Satellite Frequency and press “OK”.

STEP 3

Choose Reprogramming and press “OK”.

STEP 4

Select Yes, continue and press "OK" to proceed with the update.

Otherwise, select No, go back to cancel.

STEP 5

Satellite Frequency Update progress screen will be displayed.

STEP 6

The test result will be displayed once completed.

Press "OK" to go back to channel.

No, Astro GO is a free app for Astro customers. The content available on Astro GO will depend on the subscription pack that you are subscribed to.

If you do not have an Astro subscription, please click here to find out packages available.

Astro X3 allow up to 2 concurrent streams at the same time, shared across your registered devices. If you’d like to enjoy more simultaneous viewing, you can add GO+ to increase to up to 4 concurrent streams for RM5.99 per month (exclusive of SST). While streaming is flexible across devices, only one Smart TV can be used at a time. The remaining streams can be used on mobile or other supported devices via Astro GO.

The Ultra Box is Astro's latest generation of 4K UHD enabled box with Cloud recording feature, redesigned new interface, and UHD resolution. Just connect the all-new Ultra Box to the internet and take control of your entertainment and explore over 100,000 videos that are waiting to be streamed, anytime. With the ability to record as many shows as you want simultaneously.

The new interface on Astro Ultra Box offers an enhanced viewing experience with a brand-new look and feel with features such as:

· New Home Screen - Everything you see is yours

· Discover VOD - Discover 100k videos, stream anytime, anywhere including in 4K UHD

· Search - Search faster and easier

· Play from Start - You missed the start? Just restart

· Stop Here, Continue There - Stop on one screen and continue on another device

· Multi-Screen - Stream seamlessly across any device

· Cloud Recording - Record all the programmes you want at the same time

. **Continuous viewing - Enable to continue watching your favorite shows during raining

Note: ** Except 4K UHD, Astro First and all radio channels

You can use your existing Prime Video account to access Prime Video on the Ultra/Ulti Box however, if you would like to enjoy the Prime Video for 2 months without additional cost, you may register with a new mobile number/email address. Alternatively, you can activate the 2-month access period using the same mobile number or email address associated with your Prime Video account after your current subscription ends, anytime between 24 April 2025 and 23 June 2025.

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Settings.

STEP 3

Navigate to Subtitles and press "OK".

STEP 4

Navigate to your preferred selection and press "OK".

No, there will be no changes to your existing Astro subscription, package, pricing, or services. You can continue enjoying your current Astro experience as usual. The launch of Astro X3 does not affect your existing subscription unless you choose to make changes to your plan.

Please provide your primary mobile number via My Astro Portal, or send it to one of our platforms found here.

Note:

• Any changes of contact details to be requested by account holder only.
• Only account holder's contact to be updated as primary mobile number in the system.

STEP 1    

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2  

Navigate to Settings.

STEP 3    

Navigate to Parental Control and press "OK".

STEP 4    

Please enter your PIN (Default PIN is 0000).

STEP 5    

Navigate to your preferred category to block and press "OK".

Yes, customer may choose to have different billing method for each different account.

Physical bill charging will only apply to the account that has opted for paper bills.

Customers with a Netflix Premium account are allowed to watch on up to 4 supported devices in 4K UHD and Netflix Spatial Audio. In addition, Netflix Premium subscribers are also allowed to download shows to watch offline on 6 devices at a time.

All streaming apps will be made available on the Ultra Box first, followed by the Ulti Box. If you would like to upgrade to the Ultra Box, please visit product.astro.com.my/tv or reach us via WhatsApp by typing “Hi” at 03-9543 3838 for assistance.

Yes, customers may need to provide additional documents such as bank-in slips or payment receipts. For refund requests due to wrong payment, it is mandatory to provide proof of payment or a bank statement that shows the transaction and bank account details

Yes. To change the language, go to the app’s side menu, then go to Settings and select the preferred interface language.

There are three tax indicators for customers to refer to and they are labelled as such:

• S1 = 8% Service Tax
• S2 = 6% Service Tax
• N = Non-taxable item

Each item in your bill, under the Monthly Charges section will be marked with one of these labels. Example:

S1 Primary Pack
S2 Astro Fibre 50 Mbps

The service tax amount for each item will be indicated right after the itemised list. Tax is calculated based on these indicators and added to your total monthly charges.

Step 1: Separate Your Wi-Fi Network Name

First, you need to set up your Wi-Fi to Dual-band in order to be less susceptible to interference, and allows you to choose between the 2.4GHz or 5GHz bands when connecting a device. A Wi-Fi frequency of 5GHz is best when you are near your router, and 2.4GHz is best for when you are far from your router.

• Check the bottom of your router for a website or IP address, username, and password.

Below are details for a standard login based on a standard router issued by ISP (Telekom Malaysia, Maxis, and Time dot Com)

• Login to your account
• Identify your Wi-fi Settings (This could be in advanced settings)
• Identify both the 2.4GHz and 5GHz options.
• Split the signals by renaming the 2.4GHz and 5GHz signals respectively, and make sure both are enabled.
• For detailed instructions based on router model, on how to separate your Wi-Fi, click here and choose the option according to your ISP and router brand.

Step 2: Factory reset your Ultra Box by following the steps below.

a. Press the Home button on your remote

b. Go to your settings page

c. Scroll down and select Reset/Restore

d. Select restore factory settings and proceed

e. Enter your PIN to access restore factory settings (default pin: 0000)

f. Choose restore and wait until the box reboots automatically. This may take around 2 minutes and you will see the Astro logo again when it's done.

You may utilise your credit balance to offset future billing on your Astro account, or contact us here for further enquiries.

Yes, you can continue to access Prime Video if you have an active subscription to the Epic or Movie packs, where Prime Video is included.

If you upgraded to a pack that includes Prime, you do not need to reactivate Prime Video. Streaming access will continue seamlessly.

If you downgraded from a pack that includes Prime Video, you will need to reactivate Prime Video to resume streaming and retain your watch history.

Your watch history is linked to the Prime Video account that was initially activated. Therefore, if you reactivate Prime Video using the same email address or mobile number used during the original activation, your previous watch history will be restored.

Note: If you are on any other pack, you will need to purchase Prime Video separately at RM25 month to continue enjoying access.

For customers with the Ultra or Ulti Box, please ensure to provide your latest contact details to our Astro agent during the call to terminate your account, this includes your mobile number and house address. If you still need further help, please contact us at 03-9543 3838.

STEP 1
Switch off the power of your box and make sure that the adapter’s power light is off.

STEP 2
Unplug the HDMI cable from your TV and plug it back in securely to other available HDMI port.

STEP 3
Switch on the power for your box and make sure that the adapter’s power light is on.
Please wait for 5 minutes.

STEP 4
Turn on your box. Do select the correct TV input.

------

If you're seeing a persistent blank screen after changing the display resolution on your Ultra/Ulti Box (for example, to 2160p), your TV may not support the selected resolution.

STEP 1

Switch off the power for your box and make sure that the adapter's power light is off.

STEP 2

Switch on the power for your box and make sure that the adapter's power light is on.

STEP 3

Press the standby button repeatedly after switch on the power.

The Startup Options screen will appear on your TV.

STEP 4

Press "987" to access the Advanced Startup Options menu.

Then, press "1" to initiate a reset setting.

STEP 5

Press "OK" to confirm restore to factory setting.

STEP 6

After the factory setting is restored, TV will turn blank.

Please wait until the box completes initiate setup.

STEP 7

Press "1" to initiate Linux download on the software.

STEP 8

Once completed, the following screen will appear on your TV.

Refer to Installation Setup guide here to complete the setup.

Streaming app entitlement is dependent on the TV Pack you are subscribed to, with some streaming apps available on Astro as an add-to-bill service. Please visit product.astro.com.my/apps to see if you are entitled to your favourite streaming app once it is launched!

Watch this video or follow below steps to Improve Slow WiFi Connection for Astro Fibre

Slow browsing using LAN cable

Looks like there is something wrong with your service connection.

Please run the Speed Test and attach the picture or screenshot of the speed test in the Feedback Form below, in order for us to provide further assistances.

Click here for Speed Test guideline.

Quick Info

A Speedtest is a service that provides free analysis of Internet access parameters, such as connection data rate.

Slow browsing using Wi-Fi

1. Router Positioning

Most people underestimate the importance of picking a good spot for a Wi-Fi router. Even a small shift in positioning could end up being the difference between day and night.

i) High vs. Low

Put the router as high up as possible to extend the broadcasting range of the radio waves. This also helps clear the router of possible interferences.

ii) Concrete & Metals

Make sure your router isn't blocked by any other objects, especially devices that are electronic. Also, avoid placing your router in your basement as this area is usually enclosed by a lot of concrete, which can be almost impossible for Wi-Fi signals to penetrate.

iii) Distance to Router

The further away from your router you get, the weaker the Wi-Fi signal. Therefore, the best option is to place your router as close to your devices as possible, but this is only practical if you have one main area where you tend to use your devices.

Otherwise, you should place your router near the center of your home. After all, Wi-Fi broadcasts in 360 degrees, so it doesn't make sense to put it at one end of the house.

2. Wireless Interference & Noise

You've probably never noticed but there are wireless signals all around you wherever you go and they're passing through you all the time. From where? Electronic devices, Wi-Fi routers, satellites, cell towers, and more.

Although Wi-Fi is supposed to be on a different frequency than most of these devices, the amount of radio noise can still cause interference. Some common causes of interference include:

i) Microwaves

ii) Bluetooth Devices

iii) Cordless Phone

3. Surrounding Wi-Fi signals

A truth of the modern world is that every household has their own Wi-Fi network, which can cause issues with channel overlap. This can be somewhat problematic in a townhouse, but is especially problematic in housing complexes and apartments where there can be many routers within close proximity.

Which is why it's important that you pick a good channel in your router settings. Modern routers can choose channels for you automatically, but sometimes it's better to investigate and find the best channel yourself.

4. Usage

More likely, however, is that the people on your network such as friends, roommates, or family members are participating in bandwidth-heavy activities like gaming and streaming Ultrabox/ Netflix.

Fortunately, if this is the case, you can prioritize your own network traffic by enabling Quality of Service in your router settings.

If the problem persists, please run a Ping Test, Traceroute Test and attach the picture or screenshot of both test results in the Feedback Form below, in order for us to provide further assistances.

Please make sure to attach the required screenshot(s) in ONE file (i.e. Microsoft Word document, PDF, Image file) before submitting the form.


Quick Info
A Speedtest is a service that provides free analysis of Internet access parameters, such as connection data rate.
A Ping Test shows how long it takes for packets to reach host.
A Traceroute Test traces the route of packets to destination host from our server.

No there will not be any penalty.

For the Multiroom subscription on a box setup, if your subscription is within the 24-month contractual period. Then a pro-rated penalty of RM600 will be applied for any Astro box except for Ultra Box, which the penalty will be RM1,000.

You can make changes to your Netflix plans that are included in your Bundle through My Astro app

You can change your non Astro-bundled a-la carte Netflix plan at any time by signing into Netflix.com and visiting the Account page, then selecting Change Plan to view and select available plans.

Your account may be under suspension. To resolve this issue, proceed to submit report via WhatsApp or

Feedback Form

.

1. Open/Download the My Astro app or visit My Astro web.

2. Login with your Astro ID.

3. Go to Account.

4. Select 'Profile'.

5. Under Email, tap on the edit icon.

6. Enter the 6-digit One Time Pin and tap 'Verify'.

7. Select 'Approve' to update email address.

8. Enter the new email and tap 'Save'.

9. A successful notification will be displayed.

You should have received an email or SMS with your activation details, please click on the link provided to be redirected to the Netflix website to activate your account.

Alternatively, you can also activate Netflix on your Ultra/Ulti Box. Please surf to CH 741 on your Ultra/Ulti Box (or click the Netflix button on your Astro remote) and follow the instructions on the screen.

Yes, watching on the Astro Smart TV app will utilise one (1) of your Astro Go concurrency.

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Settings.

STEP 3

Navigate to Menu Language and press "OK".

STEP 4

Navigate to your preferred language selection and press “OK”.

No, the 12-month contract will not automatically renew. Customers are only required to serve one contract cycle, and there is no contract renewal.

Watch this video or follow below steps to perform installation setup - Plug and Play Mode - Ultra Box / Ulti Box

STEP 1
Please wait while your Astro box initializes.

STEP 2
Select your preferred language.

STEP 3
Navigate to Next and press "OK".

STEP 4
Select Auto as the Video Resolution.

STEP 5
Navigate to Next and press "OK".

STEP 6
Navigate to Confirm and press "OK" to confirm your selection if you are able to read the texts on screen properly.
Otherwise, navigate to Cancel to revert to the previous settings.

STEP 7
Select IPTV Plug & Play (self-install) as the box operating mode.

STEP 8
Navigate to Next and press "OK".

STEP 9
Select your preferred connection.
For connection via Wi-Fi, proceed to STEP 10.
For connection via LAN Cable, proceed to STEP 16 once you are connected.

STEP 10
Please wait while your Astro box searches for available Wi-Fi networks.

STEP 11
Navigate to your preferred Wi-Fi network and press "OK".

STEP 12
Please enter the password to connect to the Wi-Fi network.

STEP 13
Navigate to Done to continue.

STEP 14
Please wait while your Astro box connects to the internet.

STEP 15
Navigate to Yes to allow your Astro box to connect to this network automatically.
Otherwise, navigate to No.
Proceed to STEP 16 for the next step.

STEP 16
Your box's connection status will be displayed.
Navigate to Finish to complete the setup.

Starting 20 January 2026, all Astro customers can add on the TVBAnywhere+ app to their subscription via their Ultra/Ulti Box, the My Astro app or visit

astro.com.my.

STEP 1

Press "HOME" button on your remote control.

STEP 2

Navigate to Settings and press "OK".

STEP 3

Navigate to STB Diagnostics and press "OK".

STEP 4

Navigate to IP Diagnostics and press "OK".

STEP 5

IP Diagnostics information will be displayed.

To enjoy full premium access, simply add RM10 to upgrade your Sun NXT Lite subscription to
Sun NXT Premium.

You will continue to have access to Disney+ until the end of your current subscription cycle. After that, you will no longer be able to access Disney+ through Astro.

This error indicates that you are streaming on Astro GO while being connected to a VPN. Please close your VPN application and try streaming again.

If you are still having issues, proceed to submit report via WhatsApp or Feedback Form.

If you see the error message "There is No Internet Connection" while using the Astro app on your Smart TV, please follow these troubleshooting steps:

1. Check Your Internet Connection

• Confirm whether your Smart TV is connected to the internet via Wi-Fi or a LAN (Ethernet) cable.

2. Check the LAN Cable Connection (if using Ethernet)

• Ensure the LAN cable is securely connected from the router's LAN port to the TV's LAN port.
• Verify that the LED indicator lights on both the router and TV network port are active.

3. Test the LAN Cable

• Connect the same LAN cable to another device (for example, a laptop or another Smart TV).
• Check whether the device can access the internet to confirm the cable is functioning properly.

4. Reconnect to Wi-Fi (if using Wi-Fi)

• Go to your TV's network settings.
• Select your home Wi-Fi network and choose Forget Network.
• Reconnect to the Wi-Fi network by entering the password again.

5. Check Other Devices

• Verify that other devices in your home (such as smartphones, tablets, or laptops) can connect to the same Wi-Fi network.
• If all devices are unable to connect, the issue may be with your internet service.

6. Restart Your Devices

• Turn off and restart the following devices:

• Router
• Modem (if applicable)
• Smart TV

• Wait a few minutes for the internet connection to stabilize.
• Launch the Astro app again and test the playback.

If you are still having issues, proceed to submit report via WhatsApp or Feedback Form and provide:

• Astro ID use
• Smart TV model
• OS version
• Error reported on device

This will help our support team investigate and assist you further.

The following Smart TV models are supported:
a) Samsung TV (2020 models and above) with Tizen OS 4.0+

b) LG TV (2020 models and above) with WebOS 4.0+

c) Android TV (Android 8.0 and above)
Please refer to the complete list of Android TV brands supported by the Astro Smart TV app below:

*Also supported on Google TV, Oppen, CAIXUN, Mecoo

Byond Box (DMT 5)

STEP 1

Switch on the power for your box and make sure that the adapter's power light is on.

STEP 2

Put the box on standby mode.

STEP 3

Press and hold the Home button on the box.

STEP 4

Wait until "boot" appear on the front panel and released.

STEP 5

New Installation Settings page will appear.

Click here for the guides to complete the setup.

Byond Box (DMT 4)

STEP 1

Switch off the power of your box and ensure the adapter�s power light is off.

STEP 2

Switch on the power of your box and ensure the adapter�s power light is on.

STEP 3

Press and hold the Ch+ and Ch- keys on the box simultaneously when the "boot" message appears on the front panel.

STEP 4

Wait until the "Clr" message appears on the front panel, then release the Ch+ and Ch- keys.

STEP 5

New Installation Settings page will appear.

Click here for the guides to complete the setup.

Byond Box (Zapper)

STEP 1

Ensure your box is on standby mode. (Red light on box's front panel).

STEP 2

Press and hold the Standby button. Wait until the LED at front panel change from red to green for 3 times, then release the button.

STEP 3

New Installation Settings page will appear.

Click here for the guides to complete the setup.

Byond Box (New Zapper)

STEP 1

Switch off the power of your box and ensure that the adapter�s power light is off.

STEP 2

Switch on the power of your box and ensure that the adapter's power light is on.

STEP 3

Keep pressing the 'Power' button until the Startup Option screen appears.

STEP 4

Press "369" on the remote control to trigger refresh box setting menu.

STEP 5

Press "OK" to proceed. The box will be refreshed to the original setting.

STEP 6

New Installation Settings page will appear.

Click here for the guides to complete the setup.

Yes, you can manage all of your Astro Fibre subscriptions with the Astro Fibre App. However, you would need to create a different Astro ID for each Astro Fibre account.