You may utilise your credit balance to offset future billing on your Astro account, or contact us here for further enquiries.

You may cancel your ZEE5 Premium subscription here. Kindly note that we will not be able to offer a refund if you do decide to leave the ZEE5 app before your subscription period ends.

As a rule of thumb, this issue might happen when the devices are not equipped with minimum requirement above that supports the subscribed internet speeds:

• WiFi technology
• Network Interface Card (NIC)

As mentioned above however, it is important to note that despite meeting the device minimum requirements, it is not a guarantee that devices connected over WiFi will be able to achieve maximum subscribed internet speeds due to the following:

1. Bad WiFi signal quality and coverage across the area due to:
   • Distance from the RGW/Mesh AP with connected device
   • Obstruction within the house (walls, metallic surfaces)
   • Interference with other household appliances
2. Congested bandwidth
   • If there are too many devices connected to the WiFi network, then the bandwidth might be overloaded with traffic hence, slowing down the speed
3. Devices are connected using WiFi instead of wired using LAN.
   • It is important to note that wired connection offers better reliability and speed over WiFi.
   • WiFi is more prone to interference compared to a wired connection which causes lower speeds and dropped signal.
4. Router Positioning: Most people underestimate the importance of picking a good spot for a Wi-Fi router. Even a small shift in positioning could end up being the difference between day and night:
   • High vs. Low: Put the router as high up as possible to extend the broadcasting range of the radio waves. This also helps clear the router of possible interferences.
   • Concrete & Metals: Make sure your router isn’t blocked by any other objects, especially devices that are electronic. Also, avoid placing your router in your basement as this area is usually enclosed by a lot of concrete, which can be almost impossible for Wi-Fi signals to penetrate.
   • Distance to Router: The further away from your router you get, the weaker the Wi-Fi signal. Therefore, the best option is to place your router as close to your devices as possible, but this is only practical if you have one main area where you tend to use your devices. Otherwise, you should place your router near the center of your home. After all, Wi-Fi broadcasts in 360 degrees, so it doesn’t make sense to put it at one end of the house.
5. Usage
   • More likely, however, is that the people on your network such as friends, roommates, or family members are participating in bandwidth-heavy activities like gaming and streaming Ultrabox/Netflix.
   • Fortunately, if this is the case, you can prioritize your own network traffic by enabling Quality of Service in your router settings.
   • If the problem persists, please run a Ping Test/Traceroute Test and attach the picture or screenshot of both test results in the Feedback Form below, in order for us to provide further assistances. Please make sure to attach the required screenshot(s) in ONE file (i.e. Microsoft Word document, PDF, Image file) before submitting the form.

Note:
Astro and its service providers will not offer any guarantees for compatibility of the customer's equipment (e.g., Personal Computer, Notebook, printers) nor provide on site troubleshooting for WiFi service issues related to the customer's equipment.

- The Mesh unit can only be used indoors. It can be mounted onto a wall or be placed horizontally on a desktop. Do not install it in other mode, such as on the ceiling.

- Keep a clearance of at least 10 cm around the device to ensure proper ventilation.

- Keep the device away from electrical appliances that generate strong magnetic or electric fields, such as microwave ovens.

Refund can be made when there be a termination of account, over payments and in cases where payment was wrongly made to another Astro account.

Simply South is a streaming service and one-stop destination for South Indian Regional Video Content. Simply South has the largest library of Tamil, Telugu and Malayam content with the latest movies, evergreen classics and comedy clips on-demand.

Astro customers can subscribe to Simply South at only RM10.00 per month (excluding tax).

If you are interested to upgrade your box, you can do so via Astro's retailers or online as follows:

I. Visit https://hub.astro.com.my/#5

II. Select `Box Upgrade` and log in with your Astro ID

III. Select the box you would like to upgrade

No, price for Astro customers will remain unchanged. Only the RRP price from iQIYI is changed.

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Settings.

STEP 3

Navigate to STB Diagnostics and press "OK".

STEP 4

Select Advanced Diagnostics and press "OK".

STEP 5

Details information of Advanced Diagnostics screen will be displayed.

STEP 6

Press down arrow on your remote to get more information.

Please be sure to take your decoder, satellite dish, smartcard, remote control and all other fixtures after dismantling is done by the technician.

To check on your termination status or date, you may:

1) Message us on WhatsApp at 03-9543 3838. Type Termination Status
2) Submit Feedback Form
3) Reach out via Astro Official Digital platform i.e. Facebook or Chat.

Our agent will provide the information you need.

Yes, customers may need to provide additional documents such as bank-in slips or payment receipts. For refund requests due to wrong payment, it is mandatory to provide proof of payment or a bank statement that shows the transaction and bank account details

Astro X3 offers a curated selection of entertainment and sports content designed to provide a great streaming experience. The availability of certain channels and programmes is subject to content rights and licensing agreements. We are continuously exploring opportunities to expand and align our content offering, with the aim of bringing more channels and content to Astro X3 in the future.

As for radio channels, Astro X3 is designed primarily for digital-first streaming households, focusing on video entertainment content. As such, radio channels are not included within the Astro X3 experience. Customers can continue to enjoy their favourite radio stations through dedicated radio streaming apps, which can be downloaded directly from their device's app store.

Yes, penalty fee of RM200/Mesh WiFi will be imposed if customer fails to return the device(s). The courier company would make two attempts to retrieve the Mesh WiFi unit within a period of 30 days, failing which the penalty would be imposed.

No, you will not be automatically switched to the new pricing. To perform a manual switch, please contact us at 03-9543 3838.

1. Ensure power cable is connected tightly.

2. Try to use another power socket / power source to eliminate faulty power sockets/power sources which could cause the issue.

3. If the issue persists, submit your feedback form for further assistance.

The TVBAnywhere+ app offers over 40,000 hours of Chinese entertainment, including the latest drama series, variety shows, evergreen classics, and unlimited TVB originals that can be enjoyed anytime, anywhere. It also features exclusive dramas, known as TVBAnywhere+ Originals, such as

Ghost Cleansing Ltd

and

OPM

, which are available exclusively on the app. In addition, the app includes selected movie titles for on-demand viewing, providing more flexibility compared to the TVB channels on Astro.

The final bill will be generated on the next cycle date once Astro account has been terminated.

Most Astro customers are eligible to use the app, web, Ultra and Ulti boxes. You will only need to login with your Astro ID. Do note that your Astro ID must be linked to your Astro account to use the service. Click "Create now!' on the login page and you will be guided to create an Astro ID if you do not have one.

Download My Astro app or visit the My Astro website.

STEP 1

Check your current software version on your box.

If the software version updated (Refer to Table 1) , proceed to STEP 2.

If software version different from Table 1, click here for Software Update guide.

Table 1

Once software is updated, tune to the impacted channel.

If issue persist, proceed to STEP 2.

STEP 2

Run Test Satellite Frequency.

Click here for the guide.

If dCSS Scan Entrypoint Success, proceed to submit report here.

Guide to submit report:

At Feedback Type select "I have Astro service related question/request" and Sub Category as "Technical Interruption".

Fill up all the required information and submit.

Please indicate if you agreed to recontract for 12 months (technical visit is FOC) or paid visitation (RM65).

You will receive appointment details via SMS within 48 hours.

If dCSS Scan Entrypoint Fail, proceed to STEP 3.

STEP 3

Proceed to Update Satellite Frequency.

Click herefor the guide.
Once completed, tune to the impacted channel.

If issue persist, proceed to submit report here.

Guide to submit report:

At Feedback Type select "I have Astro service related question/request" and Sub Category as "Technical Interruption".

Fill up all the required information and submit.

Please indicate if you agreed to recontract for 12 months (technical visit is FOC) or paid visitation (RM65).

You will receive appointment details via SMS within 48 hours.

Yes. Charges for your Disney+ subscription will begin once the subscription has been successfully added to your Astro account.

Step 1: Separate Your Wi-Fi Network Name

First, you need to set up your Wi-Fi to Dual-band in order to be less susceptible to interference, and allows you to choose between the 2.4GHz or 5GHz bands when connecting a device. A Wi-Fi frequency of 5GHz is best when you are near your router, and 2.4GHz is best for when you are far from your router.

• Check the bottom of your router for a website or IP address, username, and password.

Below are details for a standard login based on a standard router issued by ISP (Telekom Malaysia, Maxis, and Time dot Com)

• Login to your account
• Identify your Wi-fi Settings (This could be in advanced settings)
• Identify both the 2.4GHz and 5GHz options.
• Split the signals by renaming the 2.4GHz and 5GHz signals respectively, and make sure both are enabled.
• For detailed instructions based on router model, on how to separate your Wi-Fi, click here and choose the option according to your ISP and router brand.

Step 2: Factory reset your Ultra Box by following the steps below.

a. Press the Home button on your remote

b. Go to your settings page

c. Scroll down and select Reset/Restore

d. Select restore factory settings and proceed

e. Enter your PIN to access restore factory settings (default pin: 0000)

f. Choose restore and wait until the box reboots automatically. This may take around 2 minutes and you will see the Astro logo again when it's done.

You may view your current subscription details or the channels and packages you are currently subscribed to via My Astro App or My Astro Web. Just login to your accmyastro.astro.com.my/download/ount and click on Manage Subscription to view.

If the Astro Smart TV app crashes on your Smart TV, please follow the steps below:

1. Clear the App Cache

• Clear the Astro Smart TV application cache on your Smart TV.
• Once completed, relaunch the Astro Smart TV app.
• Check if the issue has been resolved.

2. Reinstall the Astro Smart TV App

• Uninstall the Astro Smart TV app from your Smart TV.
• Download and install the latest version of the Astro app from your TV's app store.
• Launch the app after installation.
• Try playing content again to verify whether the issue has been resolved.

If the app continues to crash after completing the above steps, proceed to submit report via WhatsApp or Feedback Form and provide:

• Astro ID use
• Smart TV model
• OS version
• Details of the content being played when the crash occurs

This will help our support team investigate and assist you further.

Streaming app entitlement is dependent on the TV Pack you are subscribed to, with some streaming apps available on Astro as an add-to-bill service. Please visit product.astro.com.my/apps to see if you are entitled to your favourite streaming app once it is launched!

For customers who wish to have their physical tax invoices reprinted, there will be a flat fee of RM10.00 levied as part of the process which has been implemented since year 2015.

If you have a random Astro power cable, remote control or old box lying around at home, you are required to discard them only at registered collection centres for proper handling and management of e-waste in an environmentally sound manner. Click here to find a registered collection centre near you.

For all recycling-related questions, please click here.

Watch this video or follow below steps to fix broadband no service - Astro Fibre

You need to identify your modem type by looking at the modem light indicator before proceeding with troubleshooting.

The type of modem is indicated as per below:

MODEM INDICATOR 1

MODEM INDICATOR 2




MODEM INDICATOR 3



BTS 1

1. Please power off your modem and router. (This is to refresh your modem and router performance)
2. Make sure the fibre cable from your wall socket to modem is securely connected.

3. Please ensure the LAN cable is securely connected from router to your devices (Astro Box/Laptop etc.)

Modem connection



Router connection



4. Now, power on modem and router, wait for 2 minutes to stabilise the devices after reboot. Your internet services should be restored.

5. If issue persists, please connect to our agent and attach your modem light indicator picture for further assistance.



BTS 2

1. Please power off your modem and router.
(This is to refresh your modem and router performance)

2. Make sure the fibre cable from your wall socket to modem is securely connected.

3. Please ensure both LAN cables on the Modem (LAN Port 2) and Router (Port 1) are properly connected.


Modem connection



Router connection


4. Power on your modem and router, wait for 2 minutes to stabilise the devices after reboot. Your internet services should be restored.

5. If issue persists, please connect to our agent and attach your modem light indicator picture for further assistance.



BTS 3

1. Please ensure your modem and router power plugs are securely connected to the power socket.

2. Alternatively, try to connect the power plug to a different power socket or power source. This step is to eliminate the possibility of faulty power socket which could cause the issue.

3. If issue persists, please connect to our agent for further assistance.

Certain content is limited to selected countries due to copyright restrictions. Hence, you may not be able to view certain movies in your country.

Discover thousands of movies and series you'll love, and we are continuously expanding. If you would like to enjoy more movies on top of your current subscription, press the

Home

button and select

On Demand

. Use the arrow keys to scroll to

Store

. Pick and choose to rent any movie for up to 48hours.

STEP 1

Try to change channels on your Astro remote. Check the LED light.
If the LED is blinking 3 times or if it is not blinking, replace the batteries and proceed to STEP 2.
Otherwise, if the LED is blinking 1 time, your remote is working fine, let's proceed to STEP 3.

STEP 2

Check if you can change channels using your Astro remote control. You should no longer be experiencing this problem if is a battery issue.
If issue remain after batteries replacement, proceed to STEP 3.

STEP 3

You need to refresh the box setting manually from the box front panel.
Refer to Refresh Box setting (Clear NVRAM) - Ultra / Ulti Box.
If issue persist, please submit the issue on our Feedback Form.

STEP 1

Press "HOME" button on your remote control.

STEP 2

Navigate to Preferences and press "OK".

STEP 3

Navigate to Auto Standby and press "OK".

STEP 4

Navigate to your preferred selection and press “OK”.

STEP 5

Select Yes, continue and then press "OK" to confirm on the changes.

Otherwise, select No, go back to cancel.

STEP 1

On your remote, press the Home button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Guide.

STEP 3

Select the channel you would like to lock and press "OK".

STEP 4

Select "Lock Channel" and press "OK".

STEP 5

You channel is successfully locked when this screen appears.

STEP 6

Your selected channel will have a lock tagging after being locked.

If you have NOT made any changes to your Astro pack on or after 9th November 2021, you can enjoy up to four (4) concurrent streams on Astro GO anywhere, anytime. However, if you have Astro GO+ as part of your subscription, you will be upgraded to four (4) concurrent streams.

Yes. The TVBAnywhere+ app can be downloaded on compatible mobile device via the Apple App Store or Google Play Store. Once installed, customers can log in with their Astro ID to access the app.

The Astro X3 packs are available to both new and existing Astro customers, making it easier for customers to enjoy a fully digital viewing experience. For existing Astro customers, subscribing to an Astro X3 pack under a 12-month contract will be treated as a new subscription, and a separate account will be created.

To manage this subscription, customers will need to register a new Astro ID using a new email address. This ensures a smooth and seamless self-service experience, with each subscription managed independently.

Some of our payment partners require payees to scan the barcode on the statement to make payment. Always bring your Astro bill statement when making payment over the counter.

This error indicates that you are streaming on Astro GO while being connected to a VPN. Please close your VPN application and try streaming again.

If you are still having issues, proceed to submit report via WhatsApp or Feedback Form.

You can access your Viu Premium account on up to five (5) devices at a time. To ensure a
smoother streaming experience, please sign out from any unused devices.

You can be assured that your data are safe with us. Astro implemented sufficient security measures to protect customer data and fully comply to Personal Data Protection Act

If you are currently receiving a paper bill, your billing delivery method will automatically switch to e-bill once your e-invoice request is accepted. This also means you'll be saving RM10 on paper bill fees. Please ensure that your email address is accurate.

Click here

if you wish to update your contact details.

Astro ID is the account you use to sign in and manage all your Astro services online. You can use your Astro ID for the following Astro apps and portals:

1. My Astro
2. Astro GO
3. HBO GO
4. Disney+
5. iQIYI
6. TVBAnywhere+
7. beIN Sports Connect
8. SYOK App
9. AWANI App
10. Astro Website
11. Ideaktiv portals

You can create an Astro ID using your mobile number or email address here. To secure your Astro ID, please proceed to next step and link the ID to your Astro account number (10 digits) or smart card number (12 digits).

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Settings.

STEP 3

Navigate to Master PIN and press “OK”.

STEP 4

Please enter your PIN (Default PIN is 0000).

STEP 5

Please enter your new PIN.

STEP 6

Please re-enter your new PIN to confirm.

STEP 7

Your PIN successfully changed when this screen appears.

If you see the ‘Subscribe to Prime Video’ message on the Prime Video app, it means you have not activated your access through Astro. Please press the Back button on your remote and follow the steps provided here:
https://support.astro.com.my/question/i-have-activated-my-prime-video-access-with-astro-how-do-i-log-in-and-watch-prime-video-on-my-ultra-ulti-box

To allow customers to decide on their WiFi connection arrangement based on their preference upon being advised by the installer on-site.

User to manually connect their devices to different WiFi bands based on their usage and preference.

Yes, you may assign your family or friends to help you drop off the Astro box.

Please ensure that:

a. Your Astro subscription includes Disney+. You can verify this via My Astro app or web under Manage Subscription → Add-ons.

b. Your Disney+ subscription has been activated. You can check the activation status via My Astro app or web under Manage Subscription → Add-ons.

c. You are using the correct email address or mobile number associated with your Disney+ account.

If you continue to experience login issues, please WhatsApp or call Astro’s Customer Service at +603 9543 3838.

STEP 1

Press "HOME" button on your remote control.

STEP 2

Navigate to Settings and press "OK".

STEP 3

Navigate to STB Diagnostics and press "OK".

STEP 4

Take a look at the HDMI Connection Status.

Customers who subscribe to the HBO Max app as an ala carte add‑on via Astro after 1 March 2026 will have direct access to content such as HBO Originals, blockbuster movies, and exclusive series, all available via the app.