To reconnect your Astro account, please check your Account status, Bill Summary and pay on Astro Quick Pay. Your disconnected services will resume within 1 hour after you have paid your "Total Overdue Charges"

For any unreturned equipment, penalty fee will be charged as below:

• Astro Box – RM100
• Router – RM200 (For Astro Fibre only)
• Mesh – RM200 each (For Astro Fibre only)

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Settings.

STEP 3

Navigate to Audio and press "OK".

STEP 4

Navigate to your preferred selection and press “OK”.

Yes, please open any marketing emails you have received from iQIYI and click on the unsubscribe link embedded in the email.

If an error message on your TV has one of the following keywords:
- Switch to Continuous Viewing
- Service Currently Not Available (SCNA)
- (Code: SCNA)

You can proceed with the troubleshooting steps below if the weather is good. Otherwise, you may try again later.

STEP 1

On your remote, press the Home button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Settings.

STEP 3

Navigate to Satellite Settings and press OK.

STEP 4

Navigate to Diagnostics and press OK.

STEP 5

Refer to the signal strength on your screen.

If it is 65 or higher, please take the screenshot and submit your feedback form.

If it is below 65, please go to Step 6.

STEP 6

Switch off the power for your box and make sure that the adapter’s power light is off.

STEP 7

Unscrew the satellite cable from the box and pull it out.

STEP 8

Plug the satellite cable back into the box and screw it back securely.

STEP 9

Switch on the power for your box and make sure that the adapter’s power light is on. Please wait for 5 minutes.

STEP 10

Turn on your box. You should no longer be experiencing this issue.

If issue persist, please submit the issue on our Feedback Form with error details and attach a picture of your General tab of the STB Diagnostics for assistance.

Centralised Dish

If your Astro Box is connected to your apartment or condo building's centralised dish and the issue persists, please contact your respective Building Management before reaching out to our agents.

STEP 1: Power Off the Box

Switch off the power for your box. Ensure the adapter's power light is off.

STEP 2: Remove the Smart Card

Locate the Smartcard at the front or right side and gently pull it out.

STEP 3: Clean the Smart Card

Wipe the Smartcard's gold chip clean using a dry soft cloth.

STEP 4: Reinsert the Smart Card

Make sure the gold chip is facing upwards. Insert the Smart Card fully into the slot until it seats firmly.

STEP 5: Power On the Box

Switch on the power for your box and make sure that the adapter's power light is on. Please wait for 5 minutes.

STEP 6: Turn On the Box

Power on the box and check if the issue is resolved.

If issue persist, please submit the issue on our Feedback Form and attach a picture of your smart card number for assistance or chat us via WhatsApp at 03-95433838.

Yes, you can. Once you update your email address, your next e‑bill will be delivered to the new email address you’ve provided. It’s important to make sure your email address is accurate so you can continue receiving your monthly e‑bill without interruption.

Click here for a step‑by‑step guide on how to update your email address.

If you did not receive the recovery email or verification code, please make sure that:

1. You are entering the correct email address or mobile number you used to register for your Astro ID.
2. Check your junk mailbox or spam folder.

To find out which email or phone number you have used to register your Astro ID, you may submit a feedback form. Kindly select feedback type "I have an enquiry/issue with Apps" choose "Astro GO"

We will get in touch with you within 48 hours to solve your enquirie

Service Tax is charged based on the date the service is rendered. For services rendered on or after 1st March 2024, the Service Tax rate would be at 8% whilst for services enjoyed before 1st March 2024, the Service Tax rate would be 6%.

Yes, effective on bill date 9^th July 2024 onwards, the Service Tax for Astro Broadband Bundle/Astro Fibre Bundle will be streamlined at 6%. Astro Fibre Standalone and Mesh WiFi charges will remain at 6% Service Tax as announced on 1^st March 2024.

You will be contacted by an Astro representative within two working days to advise you on the next course of action.

Your Astro account number is a 10-digit combination e.g.08XXXXXXXX.

To check your account number, you can do it through My Astro. Here's how:

1. Download the My Astro app or visit My Astro web
2. Login using your Astro ID
3. Go to Account
4. You will be able to see your account number tied to your subscription

Alternatively, you can find your account number on your paper bill or e-bill. You can refer to the top right corner of the bill.

🔄 Want to manage your Astro subscription easily?

📱 Download the My Astro app to:
- Manage your pack subscriptions
- Get add-ons in just minutes
- Get details about your contract

Currently, you can only select one Netflix subscription at a time. Your available options include the Basic 24 Months, Standard 24 Months, or Premium 24 Months plans.

Yes, you may return Astro equipment even after being charged for the box fee. You can choose either to opt for:

1. At-Home Collection: Please contact Astro to schedule for equipment collection. A courier partner agent or installer will call for the collection.
2. Self-drop-off: Customers are required to self-pack their Ultra Box or Ulti Box and SIM Card into a box and drop the parcel off at any of our listed courier partner branch.

After successfully returning the box, Astro will proceed to waive off the box fee within 30 days from the confirmation date of the returned items to our Astro warehouse. However, if you’ve made the payment, we will proceed with the refund to your registered credit card or to your account.

You may view your latest tax invoice or bill via any of the platform listed below:

A. My Astro app

1. Download the My Astro app

2. Login using your Astro ID

3. Go to Account > Bills

4. You will be able to see your outstanding bill amount, make payment, download bill statements, and view payment history all in one app.

B. My Astro web

Alternatively, you can use the web version
C. IVR

1. Call +603-95433838

2. Press 1 for Account Related Queries

3. Input your 10-digit Astro Account no. or 12-digit MyKad no.

4. Press 2 for Payment and Billing

5. Press 1 to receive an SMS with your bill balance and a link to pay online

Note: You will not be able to download your bills or view payment history via Astro Quick Pay. For a better experience to manage your bills (To download bills or view your payment history), you can download the My Astro app.

💳 Want to manage your Astro bills easily?

📱 Download the My Astro app to:
- View and download bill statements
- Check payment history
- Pay in just a few taps

To change your password, you may use the ‘forgot password’ recovery feature on the login page. Just enter the email address/ mobile number you signed up with and we will send you a recovery email.  

Alternatively, you may also change your password or manage your account details by logging on to www.astro.com.my, click My Account, then proceed to Log in.  

FORGOT / RESET PASSWORD (EMAIL ADDRESS)

FORGOT / RESET PASSWORD (MOBILE NUMBER)

Yes, English subtitles are available for all movies. Additionally, Malay and Arabic subtitles are available for selected movies. In addition, selected titles will be dubbed in multiple languages such as Tamil, Telugu, or Malayalam.

To check your contract, please visit My Astro.

You may register up to four (5) devices.

To remove devices on Astro GO, click on Settings > Registered Devices to view and remove a device(s) from the list of devices registered to your Astro ID.

The fee is a one-time activation fee that will be charged when you subscribe to the Plug & Play Box.

1. Unifi netis brand

The following shows an Interface based on Unifi router

1. Launch Web Browser and enter the default's gateway's IP address (192.168.1.1) in the address bar.

1. Enter Username and Password.
   1. Username = tmadmin
   2. Password = Adm@xxxx (xxxx refers to last four digits of MAC address)

1. Choose WLAN -> wlan0 (2.4GHz) Basic Setting. Note down on SSID.

1. Choose WLAN -> wlan1 (5GHz). Compare SSID with previous SSID.

1. If SSID for wlan0 (2.4GHz) and wlan1 (5GHz) are the same. Change wlan1 (5GHz) SSID by adding number 5(i.e. ifuni_5G) to differentiate from 2.4 GHz. Click Apply Changes.

Note: Connection to Wi-Fi may be temporarily loss while the changes is updated.

You will be able to check your balance, switch to e-billing, request for payment barcode and request for reconnect at standard telco rate.

Please fill up the forms below for processing your request:
Transfer of Equiment Ownership Form

In general, these two bands can be differentiated with these parameters: Coverage, Channel Interference and Speed.

2.4GHz gives better coverage but lower speeds, while 5GHz provides faster internet but covers a smaller area.

Netflix is available to IPTV customers on the Ultra Box and Ulti Box. Non-Ultra Box customers will not be able to access Netflix on CH741. Please upgrade to the Ultra Box/Ulti Box to access Netflix on the Ultra Box.

If Astro does not receive your payment by the stated due date, your service may be disrupted as our system will automatically suspend your account. If you then wish to reconnect your subscription account, a charge of up to RM42.40 (inclusive of SST) will be imposed upon reconnection.

Find out more about the reconnection fee here.

STEP 1
Please wait while your Astro box initializes.

STEP 2
Select your preferred language.

STEP 3
Navigate to Next and press "OK".

STEP 4
Select Auto as the Video Resolution.

STEP 5
Navigate to Next and press "OK".

STEP 6
Navigate to Confirm and press "OK" to confirm your selection if you are able to read the texts on screen properly.
Otherwise, navigate to Cancel to revert to the previous settings.

STEP 7
Select Satellite as the box operating mode.

STEP 8
Navigate to Next and press "OK".

STEP 9
Select your preferred connection.
For connection via Wi-Fi, proceed to STEP 10.
For connection via LAN Cable, proceed to STEP 16 once you are connected.

STEP 10
Please wait while your Astro box searches for available Wi-Fi networks.

STEP 11
Navigate to your preferred Wi-Fi network and press "OK".

STEP 12
Please enter the password to connect to the Wi-Fi network.

STEP 13
Navigate to Done to continue.

STEP 14
Please wait while your Astro box connects to the internet.

STEP 15
Navigate to Yes to allow your Astro box to connect to this network automatically.
Otherwise, navigate to No.
Proceed to STEP 17 for the next step.

STEP 16
Navigate to Next and press "OK".

STEP 17
Navigate to Universal.

STEP 18
Navigate to Next and press "OK".

STEP 19
Select 01 M3B VL - 10732 as the Entry Point.

STEP 20
Navigate to Next and press "OK".

STEP 21
Please wait until the signal reading is updated.
Navigate to Finish and press "OK" to complete the settings.

If you have NOT made any changes to your Astro pack on or after 9th November 2021, you can enjoy up to four (4) concurrent streams on Astro GO anywhere, anytime. However, if you have Astro GO+ as part of your subscription, you will be upgraded to four (4) concurrent streams.

If you see this message, it means your Astro account has reached the maximum number of devices allowed for registration.
Please perform the following checks and troubleshooting steps:

1. Manage Your Registered Devices

• Go to www.astrogo.com.my or open the Astro GO app.
• Log in using your Astro ID and password.
• Review the list of registered devices.
• Remove a device that you no longer use.
• Return to your new device and try signing in again.

If you are unable to remove a device or continue to see the error message, proceed to submit report via WhatsApp or Feedback Form and provide:

• Astro ID use
• Smart TV model
• OS version
• Error reported on device

This will help our support team investigate and assist you further.

Note: Please be aware that only one Smart TV device is allowed per account at any point in time.

In your first Astro bill, the first month's bill will be deducted accordingly excluding tax. You will still need to pay the full tax amount for your first month as per your first month's bill.

Note: Advance payment is only applicable to Astro TV pack purchases. If you subscribe to an Astro Fibre + TV bundle, only one month of your TV subscription fee (excluding tax) is required to be paid upon sign-up. The full tax amount and the first-month subscription fee for Astro Fibre will be paid on your first month's bill.

By adding a Netflix account to your Astro bill, your Netflix account is already activated. No additional steps for activation are required.

If you are an Astro subscriber
Step 1: Launch the Astro Smart TV app on your Smart TV.

Step 2: Select “Log In”.

Step 3: Scan the QR code OR visit astro.com.my/tvapp and enter the code on the screen.

Step 4: Enter your Astro ID (registered email or mobile number) and password. If you do not have an Astro ID, click on “Create now”.

Step 5: Once you have successfully logged in, the Astro Smart TV app will refresh automatically, and you will be able to access it.

If you are NOT an Astro subscriber
Step 1: Launch the Astro Smart TV app on your Smart TV.

Step 2: Select “Subscribe Now”.

Step 3: Scan the QR code to visit https://www.astro.com.my/#main and explore Astro’s packs or Multiroom (Smart TV).

Step 4: Once you have successfully subscribed, kindly follow Step 1 – 5 under “If you are an Astro subscriber” to log in.

Starting 24 October 2024, Simply South will be available on the Ultra/Ulti box for Astro customers to enjoy on the big screen as well as web app and mobile app. If you are interested to upgrade to our latest Ultra/Ulti box and/or subscribe to Simply South subscription, please reach out to us via WhatsApp by typing “Hi” at 03-9543 3838.

No, Astro will cover all expenses related to returning the box.

There will be no changes to your billing cycle.

The Astro Fibre App is a mobile application exclusively for Astro Fibre customers to allow them to schedule when each user can access the internet, content filtering that blocks harmful sites, Internet Security to protect against phishing and risky links, and Traffic Boost to prioritize calls, streaming, and gaming when it matters most., easy device management, amongst many other features for a better WiFi experience to keep your family safe and secure network.

Yes, you can upgrade your internet speed. However, speed downgrade is not allowed.

If you encounter this message while using the Astro app on your Smart TV, please follow the steps below:

1. Update Your Smart TV Software

• Ensure your Smart TV is running the latest software or firmware version.
• Check for available updates in your TV's Settings menu and install them if available.

2. Restart Your Devices

• Turn off and restart the following devices:

• Router
• Modem (if applicable)
• Smart TV

• Wait a few minutes for the internet connection to stabilize.
• Launch the Astro Smart TV app again and test the playback.

3. Clear the Astro App Cache

• Clear the application cache on your Smart TV.
• Once completed, reopen the Astro app and check if the issue persists.

4. Reinstall the Astro App

• Uninstall the Astro app from your Smart TV.
• Download and install the latest version from your TV's app store.
• Open the app and test the playback again.

If you are still having issues, proceed to submit report via WhatsApp or Feedback Form and provide:

• Astro ID use
• Smart TV model
• OS version
• Type of internet connection (Wi‑Fi or LAN)
• Screenshot/photo of the error message

This will help our support team investigate and assist you further.

Kindly note that not all Astro & Broadband Devices are required to be returned. After service termination of your Astro & Broadband service, we will call you via your registered mobile number within 3 days to schedule a pickup appointment with our Astro agent if your device needs to be returned.

If you were not contacted within 3 working days to return your devices, you are required to discard your old Astro & Broadband devices only at registered collection centres for proper handling and management of e-waste in an environmentally sound manner. Click here to find a registered collection centre near you.

Frequently Asked Questions

1) I missed the pickup appointment; what do I do now?

You can reschedule the pick-up appointment by calling our agent directly.

2) Can I reschedule my pickup date?

Yes! You can call our agent back directly to reschedule the pickup date and time.

3) Do I have to pack my device(s) before handing it over to the Astro agent?

Our Astro agent will dismantle the devices for you. However, if your devices are already dismantled, please pack them in their original box/packaging if possible. If this option is not available to you, just hand the device(s) over to the Astro agent without any packaging. You will not be charged any fees if the original packaging has been damaged/lost.

4) Do I have to print anything or fill in any forms before handing my device(s) over to the Astro agent?

No, you do not have to prepare any documents before handing your device(s) over to the Astro agent! All you have to do is get your device(s)ready before the Astro agent arrives to ensure a smooth handover process.

5) I have the Astro & Broadband router and modem to return, however, the cable(s) that come with them are damaged/lost; will there be any penalty fees?

No, please return your old Astro & Broadband modem and its power supply unit (PSU). There will be no penalty fees if the cable is damaged or lost.

Recycle via Registered Collection Centres

For all recycling-related questions, please click here.

For Astro Ultra and Ulti Box customers

• No action is required.
• The new Disney+ app will be made available automatically on your Astro Box from 7 October 2026.
• You can sign in using the same email address or mobile number associated with your existing Disney+ account to start streaming.

For customers who watch on personal devices (e.g. mobile phones, tablets or Smart TVs)

• Download the new Disney+ app to continue streaming Disney+.
• You can sign in using the same email address or mobile number associated with your existing Disney+ account to start streaming.
• The current Disney+ app will remain available until 4 November 2026, giving customers time to make the switch.
• Samsung and LG Smart TV users are encouraged to download the new app before 20 October 2026.

Please make sure that:

• You are entering the correct account holder's information while linking, ie: I/C number, passport number, Astro account number or Smart card number.
• You are linking to an Astro account (NJOI customers will not be able to log into Astro GO).
• Your Astro account is not currently linked to any other Astro ID. If your Astro account is currently linked to another Astro ID, you will see a red notice.

To find out which Astro ID is currently linked to your account, you may submit a feedback form. Kindly select feedback type "I have an enquiry/issue with Apps"

Only Astro customers with the Sports subscription as part of their Astro TV Pack (Bundle or add-on) will be able to enjoy the beIN SPORTS CONNECT app on their Ultra/Ulti Box.

Please check your internet speed and connection status via internet connection test. If your internet is working fine and the issue persists, proceed to submit report via WhatsApp or

Feedback Form

.

Please ensure that you have subscribed to the mentioned channel.
If you're subscribed to this channel, follow below steps.

STEP 1
You need to refresh the signal on your box.
Refer to Refresh signal of your box guide.

STEP 2
If issue persist after 30 minutes, proceed to submit report via WhatsApp or Feedback Form.

If band steering is enabled, you do not need to worry about which frequency band that your devices are connected to because the WiFi router will make the assessment and direct each device to appropriate frequency band.

However, it is important to note that quality and signal strength are not guaranteed due to unpredictability given that it is completely up to the connected devices and the WiFi router to intelligently decide on which band to connect.

The new Astro X3 packs and existing Astro One packs differ in how customers access Astro services and content, as shown below:

You will receive an email within 45 minutes of payment made to let you know whether your advance payment is successful or not. If your payment has failed, you may call Astro's Contact Centre at 03-9543 3838 or wait for an Astro representative to be in contact with you within 2 working days to assist you with your order.

Please contact us through one of our platforms found here or Self-serve by logging in to Astro Self-Service Portal within 3-7 days before moving out and we will sort everything out for you!

STEP 1

On your remote, press the HOME button.

STEP 2

Navigate to Update Satellite Frequency and press “OK”.

STEP 3

Choose Test Satellite Frequency and press “OK”.

STEP 4

Select Yes, continue and press "OK" to start the test.

Otherwise, select No, go back to cancel.

STEP 5

Satellite Frequency Test progress screen will be displayed.

STEP 6

The test result will be displayed once completed.

Press "OK" to go back to channel.

Real-time payments are posted almost instantaneously. However, daily system maintenance occurs between 12AM to 3AM - any payment made during this period will be delayed until system maintenance is complete.