Advance payment can be made via credit/debit card or online banking.

Currently, this change affects SMS bills only. Other SMSs such as (but not limited to) bill reminders, payment notifications, promotional SMSs or technical appointment reminders will still be sent to you if applicable.

You will be required to verify your account once when you register your Astro ID or when you reset your password. This can be done either on the My Astro website or the My Astro app. The steps are simple:

• Step 1: Log in using your email address or mobile number and password

• Step 2: Enter the verification code sent to your registered email or mobile number

• Step 3: Re-enter your password to confirm your Astro ID

• Step 4: Verification is complete! You can now log in to your Astro account and access apps like Astro GO and My Astro

For more information about the Astro Fibre App, you may click here for a detailed user guide.

Starting 20 December 2022, Astro customers will be able to enjoy the iQIYI app as an add-to-bill service for an exclusive price via Astro and enjoy the app on their Ultra/Ulti Box, mobile app and website.

No, you will not be able to watch beIN SPORTS CONNECT content outside of Malaysia as the app is geo-blocked for each country.

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Settings.

STEP 3

Navigate to STB Diagnostics and press "OK".

STEP 4

Select Advanced Diagnostics and press "OK".

STEP 5

Details information of Advanced Diagnostics screen will be displayed.

STEP 6

Press down arrow on your remote to get more information.

Below will be the process to terminate Astro account:

1. Account holder to give 30-day notice period for account termination.
2. Account will be scheduled for termination 1 (one) day before customer’s billing cycle date.
3. After account terminated, there will be a collection of Ultra/Ulti box and Broadband Equipment.

Notes: You need to settle the outstanding balance and penalty (if any)

Ultra/Ulti Box retrieval:

• West Malaysia except for East Malaysia, Tioman, Labuan and Langkawi – Courier partner will contact customer for box retrieval.
• East Malaysia, Tioman, Labuan and Langkawi – Installer will do the box retrieval.
• For other than Ultra/Ulti box, refer to recycle information here.

Broadband Equipment retrieval:

• Installer will do the equipment retrieval.

STEP 1

On your remote, press the Home button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Guide.

STEP 3

Select the channel you would like to lock and press "OK".

STEP 4

Select "Lock Channel" and press "OK".

STEP 5

You channel is successfully locked when this screen appears.

STEP 6

Your selected channel will have a lock tagging after being locked.

Please make sure that:

• You are entering the correct account holder's information while linking, ie: I/C number, passport number, Astro account number or Smart card number.
• You are linking to an Astro account (NJOI customers will not be able to log into Astro GO).
• Your Astro account is not currently linked to any other Astro ID. If your Astro account is currently linked to another Astro ID, you will see a red notice.

To find out which Astro ID is currently linked to your account, you may submit a feedback form. Kindly select feedback type "I have an enquiry/issue with Apps"

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Settings.

STEP 3

Navigate to HDMI Audio and press "OK".

STEP 4

Navigate to your preferred selection and press “OK”.

You should have received an email or SMS with your activation details, please click on the link provided to be redirected to the Netflix website to activate your account.

Alternatively, you can also activate Netflix on your Ultra/Ulti Box. Please surf to CH 741 on your Ultra/Ulti Box (or click the Netflix button on your Astro remote) and follow the instructions on the screen.

Yes. You can activate your access anytime between 24 April 2025 – 23 June 2025 to get 2 months access to Prime Video at no additional charge.

If your Astro account is suspended or disconnected, your Sun NXT app access will be immediately affected, and you will no longer be able to use the service. To restore your Sun NXT app access, please ensure your Astro account is active.

You can proceed with below troubleshooting if the weather is good. Ortherwise, you may try again later.

STEP 1
On your remote, press the “HOME” button and the home menu will be displayed at the bottom of your screen.

STEP 2
Navigate to SETTINGS and press “OK”.

STEP 3
Navigate to STB DIAGNOSTICS and press “OK”.

STEP 4
Refer to the signal strength % shown on the top left of your screen.
If it is 65% or higher, please go to WhatsApp to receive further help.
If it is below 65%, please go to STEP 5.

STEP 5
Switch off the power for your box and make sure that the adapter’s power light is off.

STEP 6
Unscrew the satellite cable from the box and pull it out.

STEP 7
Plug the satellite cable back into the box and screw it back securely.

STEP 8
Switch on the power for your box and make sure that the adapter’s power light is on.
Please wait for 5 minutes.

STEP 9
Turn on your box. You should no longer be experiencing this issue.
If issue persist, please attach a picture of your General tab of the STB Diagnostics for assistance.

Centralized Dish
If issue persist under a centralised satellite dish, please refer to your respective Building Management before contacting our agents.

STEP 1
On your Astro remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2
Navigate to Settings.

STEP 3
Navigate to STB Diagnostics and press "OK".

STEP 4
Select General Diagnostics and press "OK".

STEP 5
General Diagnostics results will be displayed on the screen.
Scroll until observed the SW Download Status.

STEP 1

Check on the adapter's power light.

If the adapter's power light is ON, please refer to Blank Screen troubleshooting steps here.

Otherwise, if the adapter's power light is OFF, switch off the power for your box.

STEP 2

Ensure power cable is connected tightly.

Plug in power cable to different power socket and switch on the plug.

You should no longer be experiencing this problem.

If issue remains, proceed to STEP 3.

STEP 3

Try a different power socket to connect the equipment.

Turn on the power socket and check the adapter's power light.

If there is no light on your power adaptor's, please submit the issue on our Feedback Form with error details and provide your sim card number for assistance.

Please indicate in the form if any lightning strike/thunderstorm/power trip occurred.

Please contact your issuing bank to enable card-not-present (CNP) transactions. This security measure helps us to protect your card information from being misused in fraudulent transactions.

Watch this video or follow below steps to refresh signal of your Astro box

OR

Please ensure to put your box on standby mode to refresh the signal.

The fastest way is via My Astro:

1. Open/Download the My Astro app or visit My Astro web
2. Login with your Astro ID
3. Go to Account
4. Tap on Subscription or TV pack
5. Tap on Rooms
6. For the box that you would like to refresh the smartcard, tap on 'Refresh box' button. This will refresh your Astro box signal

OR

WhatsApp
1. Message 'Hi' to us at 03-9543 3838
2. Click on Tap Here for Options
3. Select Help & Support
4. Type Refresh Astro Box Signal

-
📡 Experiencing technical issues?

📱 Download the My Astro app to:
- Perform self-troubleshoot
- Solve in a few minutes
- No need to call customer service

Yes, you will be able to rent titles on the WeTV mobile app. Subsequently, you will be able to stream your rented title on the Ultra/Ulti Box,

wetv.vip

, and the mobile app.

Refund can only be made by the registered Astro account holders.

However, if you would like to request refunds on behalf of the account holder, you may do so by providing the supporting documents (e.g.: authorization letter, death certificate, 3rd party NRIC copy).

Yes, users can access the Simply South app from anywhere in the world, except for India.

Once you have received the eKYC link, you need to complete the verification within 3 days.

Option 1

1. Please turn off all devices (Modem and Router). By restarting your modem, you can isolate the possibility of overloaded processes in the modem, which would  impact its performance.    

2. Ensure the fiber cable from your wall socket and modem is securely connected.

Modem connection with Copper Cable

Notes: You might be connected to LAN 1 if backbone is Maxis

Router connection

3. Please make sure the LAN cable is connected properly from router (Port 1-4 - Yellow port) to PC/Laptop.

4. If the issue persists, submit your feedback form and attach your modem light indicator picture/video for further assistance.
 

Option 2/ Option 3/ Option 5/ Option 6

1. Please turn off all devices (Modem and Router). By restarting your modem, you can isolate the possibility of overloaded processes in the modem, which would  impact its performance.

2. Ensure the fiber cable from your wall socket and modem is securely connected.

Notes: You might be connected to LAN 1  if backbone is Maxis

Router connection

4. Please make sure the LAN cable is connected properly from router (Port 1-4 - Yellow port) to PC/Laptop.

5. Please make sure both cables on Router (Any Yellow port) and Astro Decoder (Network Port behind decoder) are properly inserted.

6. Switch on modem and router and please wait for 2 minutes to stabilise the devices after reboot.

7. If the issue persists, submit your feedback form and attach your modem light indicator picture/video for further assistance.

Option 4

1. Ensure Modem/Router are connected tightly to the power socket.

3. If the issue persists, submit your feedback form for further assistance.

electronic Know-Your-Customer (eKYC) is an online process of identifying and verifying individual customers using electronic means. This enables a person to be an Astro customer anytime and anywhere, hassle-free and helps to secure your Astro account by protecting it from unauthorised usage.

Viu Premium members can enjoy ad-free viewing, unlimited downloads for offline viewing, full
HD resolution and priority/exclusive access to content!
As a Viu Premium member, you will be able to enjoy the benefits below:
a. Premium Shows
b. Ad-free viewing
c. Unlimited Downloads
d. Malay Subtitles
e. Watch On TV
f. HD Streaming
g. Exclusive Viu Originals
h. Cast videos from mobile device to TV

Astro does not provide installment plan facilities. You are advised to pay your charges before the due date, as per your monthly bill statement.

1. Power reset (on & off) your TV, Astro Decoder, Modem and Router.

2. Ensure standard physical connection (No 3rd party devices connected to decoder and modem).

3. Please ensure at all-time your router is 0.5 meter away from your Astro Decoder to avoid signal interferences.

4. Please standby computer/laptop to access to the internet and connection must be via LAN (cable) [connect the LAN (cable) at any LAN port at router and direct to computer/laptop].

5. You may open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox and etc.

6. On the address bar, please go to http://www.speedtest.net/ and below page will appear.

7. Click "Change Server" to edit the settings preferred by Internet Service Provider (ISP).

8. Edit the server settings by search and select the required server required by ISP.

For Astro Fibre provider - Select Kuala Lumpur - Astro Fibre server.

For Maxis provider - Select Subang Jaya - Maxis server.

For Allo provider - Select Cyberjaya - Global Forway Sdn Bhd server.

9.Click "GO", and the test will begin.

The test is completed once both download and upload speeds are displayed.

Sample of the Speedtest result is shown below.

**Please ensure the snapshot includes a time stamp and network used either LAN cable or wireless (as per picture above)

10. Kindly screenshot or take a picture of the result, name it as "LAN Speedtest".

11. Repeat the test once again using Wi-Fi connection (Please unplug your LAN cable and connect via wireless connection using your SSID).

12. Screenshot or take a picture of the result, name it as "WiFi Speedtest".

Watch this video or follow below steps to fix your WiFi connectivity issue

Skyworth RG21

1. Please connect your computer or laptop to your Astro Fibre router using WiFi or LAN cable. Your LAN cable must be connected from the yellow port of Astro Fibre router (Any available port).
2. Once connected, open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox and etc.
3. On the address bar, type http://192.168.100.254 and below page will appear.

Login using your username and password if you have changed the router login setting. Otherwise, your default router login is as per below.

Username: user
Password: user

4. Once you have successfully logged in, the router's web-based setup page will appear.

5. At the top of the page, click WLAN to configure the WiFi parameters.

6. To change the channel on 2.4G, click the drop-down arrow for Channel, then select your desired channel.

7. Then, click "Save & Apply" for the changes to take place.

8. You may make the same changes for 5G by click the drop-down arrow for Channel, then select your desired channel.

9. Then, click "Save & Apply" for the changes to take place.

The notification you receive will depend on the payment method you choose:
(i) My Astro Portal: e-receipt will indicate payment confirmation.
(ii) IVR: Payment status will be notified over the IVR and an SMS notification will be sent for successful transactions.
(iii) SMS: Payment status will be notified via SMS.
(iv) Call: Payment status will be notified via SMS.
(v) Customer Service Centre: Physical receipt will indicate payment confirmation.

If you're experiencing technical issues, please visit Astro's Help & Support page and follow the troubleshooting steps for your issue: https://support.astro.com.my/category/streaming-app

If the issue persists after following the recommended troubleshooting steps, please contact our customer support team via WhatsApp at 03-9543 3838 for further assistance.

As e‑Invoicing supports quicker processing, smoother transactions and a more seamless billing and tax compliance experience over time, we highly encourage customers to stay opted in. It also makes it much easier for you to keep proper records for tax relief claims. If you still wish to stop receiving e‑Invoices, you can opt out through the My Astro website or the My Astro app.

On the My Astro website:

1. Log in using your Astro ID.
2. Click Bills, scroll down to e-Invoice, and toggle it off.
3. Please click Confirm to ensure that the changes has taken place.

On the My Astro app:

1. Log in using your Astro ID.
2. Tap your account number or the default profile icon at the top left.
3. Scroll down to the Billing section, select e-Invoice, and turn the toggle off.
4. Please click Confirm to ensure that the changes has taken place.

Yes, eKYC verification is mandatory. In addition, this verification process helps to reduce manual handling of customer's personal information and secure against unauthorised usage.

STEP 1: Try Changing the Channel

Remote LED Indicator Guide:

LED blinks 3 times or doesn't blink at all:
Replace the remote batteries and try again

LED blinks once:
Remote is working fine. Proceed to the next step.

STEP 2: Test Manual Channel Change

Try changing the channel manually directly from the box front panel (If any).
If it's working, you might need to replace your Astro remote, this might be due to a faulty Astro remote.
You can visit the nearest Astro Service Center to replace your remote.

STEP 3: Refresh Box Settings

Manually reload the decoder settings using the front panel of the decoder.
Refer to Refresh Box setting Guide steps here.

If issue persist, please submit the issue on our Feedback Form with the error details and provide sim card number for assistance.

No, Astro will cover all expenses related to returning the box.

Yes, if you’re a non-Malaysian living or working in Malaysia, your Astro Broadband Bundle/Astro Fibre Bundle are subject to the 6% Service Tax effective bill date 9th July 2024 onwards.

The default PIN is 0000. You may change your PIN to a secure one by doing this at Settings, under your Preferences, select PIN Management, enter your old PIN or default PIN and proceed to create a new PIN.

You can activate Disney+ through the following methods:

a. Astro Ultra or Ulti Box

b. My Astro app or web

c. Email

d. WhatsApp

Kindly refer to the steps below to activate:

Option A: Activate on Astro Ultra or Ulti Box

STEP 1

Click on the Disney+ app logo under the Apps rail on your Home page

STEP 2

Scan the QR code or visit the website on screen to activate via Disney's platform

STEP 3

Enter your email address

STEP 4

Enter your mobile number

Only applicable for activation through Mobile

STEP 5

Create your password

STEP 6

Enter your birthday

STEP 7

Click Proceed and log in to start watching Disney+ on your TV screen

Option B: Activate on My Astro app or web

STEP 1

Log in to My Astro app or web

STEP 2

Go to Manage Subscription → Add-ons

STEP 3

Click Activate now under the Disney+ add-on

STEP 4

Confirm the SecureGo request

STEP 5

Click on Proceed to activate via Disney's platform

STEP 6

Enter your email address

STEP 7

Enter your mobile number

Only applicable for activation through Mobile

STEP 8

Create your password

STEP 9

Enter your birthday

STEP 10

Log in to start watching Disney+

Option C: Activate via Email

STEP 1

Click on the Disney+ app icon in the activation email to activate via Disney's platform

STEP 2

Enter your email address

STEP 3

Enter your mobile number

Only applicable for activation through Mobile

STEP 4

Create your password

STEP 5

Enter your birthday

STEP 6

Log in to start watching Disney+

Option D: Activate via WhatsApp

STEP 1

Click on the Disney+ activation link in the WhatsApp activation message to activate via Disney's platform

STEP 2

Enter your email address

STEP 3

Enter your mobile number

Only applicable for activation through Mobile

STEP 4

Create your password

STEP 5

Enter your birthday

STEP 6

Log in to start watching Disney+

Yes, this is a one-time approval, and you do not need to submit your application every month.

To be eligible, you'll need to be an Active Astro Pay TV customer with a valid Astro ID.

An Active Astro customer refers to a subscriber of the Astro Service, whose account is current and active with no outstanding payments due and who has not breached the Astro subscription agreement nor given any instructions to terminate and/or suspend his/her subscription to the Astro Service.

Each account you hold is entitled to one (1) tier status based on the longest active smartcard.

Download the Sun NXT app > Select "Profile" > Click on "Log in with Astro ID" > Click on "Do not have an Astro ID? Click here".

STEP 1
Switch off the power for your box and make sure that the adapter's power light is off.

STEP 2
Locate the Smartcard at the front or right side and gently pull it out make sure that the adapter's power light is off.

STEP 3
Wipe the Smartcard's gold chip clean using a dry soft cloth.

STEP 4
Make sure the gold chip is facing upwards and reinsert it all the way in.

STEP 5
Switch on the power for your box and make sure that the adapter's power light is on. Please wait for 5 minutes.

STEP 6
Turn on your box. You should no longer be experiencing this problem.
If issue persist, please submit the issue in our Feedback Form and attach a picture of your General tab of the STB Diagnostics for assistance.

1. Open/Download the My Astro app or visit My Astro web.

2. Login with your Astro ID.

3. Go to Account.

4. Under Billing, tap on Auto Debit.

5. Tap on 'Remove'.

6. Tap on 'Confirm' to remove the card.

7. Your registered card removed .

When you have reached the duration (years) needed for the upgrade, we will upgrade you into your new tier and your shiny new rewards will appear in the My Astro app. You are still eligible for all the rewards from previous tiers too.

STEP 1

Switch OFF the power of your Ultra / Ulti box and make sure that the adapter's power light is off.

STEP 2

Switch ON the power of your Ultra / Ulti box and make sure that the adapter's power light is on.

STEP 3

On your remote control, press the standby button repeatedly until the Startup Options appear on TV.

STEP 4

Press "1".

STEP 5

Press "1" if your box setup under Satellite Mode.
Press "2" if your box setup under Plug and Play Mode.

STEP 6

The Software Update progress screen will appears.

The update will take 10 - 15 minutes to complete.

Please be patience.

Watch this video or follow below steps to perform installation setup - Plug and Play Mode - Ultra Box / Ulti Box

STEP 1
Please wait while your Astro box initializes.

STEP 2
Select your preferred language.

STEP 3
Navigate to Next and press "OK".

STEP 4
Select Auto as the Video Resolution.

STEP 5
Navigate to Next and press "OK".

STEP 6
Navigate to Confirm and press "OK" to confirm your selection if you are able to read the texts on screen properly.
Otherwise, navigate to Cancel to revert to the previous settings.

STEP 7
Select IPTV Plug & Play (self-install) as the box operating mode.

STEP 8
Navigate to Next and press "OK".

STEP 9
Select your preferred connection.
For connection via Wi-Fi, proceed to STEP 10.
For connection via LAN Cable, proceed to STEP 16 once you are connected.

STEP 10
Please wait while your Astro box searches for available Wi-Fi networks.

STEP 11
Navigate to your preferred Wi-Fi network and press "OK".

STEP 12
Please enter the password to connect to the Wi-Fi network.

STEP 13
Navigate to Done to continue.

STEP 14
Please wait while your Astro box connects to the internet.

STEP 15
Navigate to Yes to allow your Astro box to connect to this network automatically.
Otherwise, navigate to No.
Proceed to STEP 16 for the next step.

STEP 16
Your box's connection status will be displayed.
Navigate to Finish to complete the setup.

Subscribing to Disney+ through Astro gives you access to more than just streaming apps. In addition to Disney+, you can enjoy a wide range of entertainment through Astro, including local and international content, live sports, movies, TV shows and on-demand programming.

Astro also offers flexible ways to enjoy Disney+, whether as a standalone subscription, bundled with other streaming services, or included as part of selected Astro packages.

Depending on the subscription option you choose, subscribing to Disney+ through Astro may also offer better value through bundled savings and promotional offers. In addition, you can conveniently manage your Disney+ subscription together with your Astro account through the My Astro app or web.

For the latest Disney+ subscription options and offers, click here.

Kindly download the Astro Smart TV app from your Smart TV’s app store and follow the steps on the screen to log in.

Byond Box (DMT 5)

STEP 1

Switch on the power for your box and make sure that the adapter's power light is on.

STEP 2

Put the box on standby mode.

STEP 3

Press and hold the Home button on the box.

STEP 4

Wait until "boot" appear on the front panel and released.

STEP 5

New Installation Settings page will appear.

Click here for the guides to complete the setup.

Byond Box (DMT 4)

STEP 1

Switch off the power of your box and ensure the adapter�s power light is off.

STEP 2

Switch on the power of your box and ensure the adapter�s power light is on.

STEP 3

Press and hold the Ch+ and Ch- keys on the box simultaneously when the "boot" message appears on the front panel.

STEP 4

Wait until the "Clr" message appears on the front panel, then release the Ch+ and Ch- keys.

STEP 5

New Installation Settings page will appear.

Click here for the guides to complete the setup.

Byond Box (Zapper)

STEP 1

Ensure your box is on standby mode. (Red light on box's front panel).

STEP 2

Press and hold the Standby button. Wait until the LED at front panel change from red to green for 3 times, then release the button.

STEP 3

New Installation Settings page will appear.

Click here for the guides to complete the setup.

Byond Box (New Zapper)

STEP 1

Switch off the power of your box and ensure that the adapter�s power light is off.

STEP 2

Switch on the power of your box and ensure that the adapter's power light is on.

STEP 3

Keep pressing the 'Power' button until the Startup Option screen appears.

STEP 4

Press "369" on the remote control to trigger refresh box setting menu.

STEP 5

Press "OK" to proceed. The box will be refreshed to the original setting.

STEP 6

New Installation Settings page will appear.

Click here for the guides to complete the setup.

Sun NXT offers content in six different languages: Tamil, Telugu, Malayalam, Kannada, Bengali, and Marathi.