Please make sure that:

1. You are logging in with the correct registered Astro ID (email or phone number) and password. If you can’t remember your password, please proceed to use the “forget password” function.
2. You have an Astro ID that is linked to an Astro account. (note: NJOI – linked users will not be able to log into Astro GO)
3. Your Astro account is active and not under suspension.

If the above points have been met, you may try some quick solutions below:

1. Clear the cache on your browser or app.
2. Check if you have the latest version of the browser or app.
3. Log out and log back into the browser or app.
4. Relaunch the browser or app.
5. Restart your mobile device.
6. Restart your internet connection.

Astro introduces the new Ulti Box with a redesigned new interface, Cloud recording feature, enhanced search capabilities and more. Just connect the all new Ulti Box to the Internet and take control of your entertainment and stream up to 100,000 videos on demand, anytime.

The features of the new Ulti Box include:

· New Home Screen -Everything you see is yours

· Discover Video on Demand (VOD) - Discover 100,000 videos, stream anytime, anywhere

· Search - Search for your favorite show or video faster and easier

· Play from Start - Missed the start of the show? Just restart.

· Stop Here, Continue There -Stop on one screen and continue on another device

· Multi-Screen - Stream seamlessly across any device

· Cloud Recording - Record all the programmers you want at the same time

. **Continuous viewing - Enable to continue watching your favorite shows during raining.

We recommend an Internet speed of 10Mbps and above for optimal access to cloud recording, streaming on demand videos and search functions.

Note: ** Except 4K UHD, Astro First and all radio channels

No. You will need to use a Malaysian mobile number registered with a local mobile network operator to register and activate your Disney+ subscription through Astro.

1. Power reset (on & off) your TV, Astro Decoder, Modem and Router.

2. Ensure standard physical connection (No 3rd party devices connected to decoder and modem).

3. Please ensure at all-time your router is 0.5 meter away from your Astro Decoder to avoid signal interferences.

4. Please standby computer/laptop to access to the internet and connection must be via LAN (cable) [connect the LAN (cable) at any LAN port at router and direct to computer/laptop].

5. You may open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox and etc.

6. On the address bar, please go to http://www.speedtest.net/ and below page will appear.

7. Click "Change Server" to edit the settings preferred by Internet Service Provider (ISP).

8. Edit the server settings by search and select the required server required by ISP.

For Astro Fibre provider - Select Kuala Lumpur - Astro Fibre server.

For Maxis provider - Select Subang Jaya - Maxis server.

For Allo provider - Select Cyberjaya - Global Forway Sdn Bhd server.

9.Click "GO", and the test will begin.

The test is completed once both download and upload speeds are displayed.

Sample of the Speedtest result is shown below.

**Please ensure the snapshot includes a time stamp and network used either LAN cable or wireless (as per picture above)

10. Kindly screenshot or take a picture of the result, name it as "LAN Speedtest".

11. Repeat the test once again using Wi-Fi connection (Please unplug your LAN cable and connect via wireless connection using your SSID).

12. Screenshot or take a picture of the result, name it as "WiFi Speedtest".

This exercise currently only affects person-to-person SMS with URL links. However, the blocking of SMS sent by businesses via short codes such as 6XXXX, 3XXXX, 2XXXX and 1XXXX will be implemented at a later phase. In response to this government initiative, Astro customers will no longer receive SMS bills effective 1 August 2023. This change will be carried out in phases.

Please switch your preferred Bill Delivery Method using our self-service portals via My Astro Web or My Astro app. Please click here to download the app on your mobile device or login to My Astro Web.

We would highly recommend for you to pre-pack your Astro Box equipment before taking it to our courier partner branch. However, if you unable to pre-pack the Astro Box, you can bring the equipment to the nearest courier partner branch for assistance.

Yes, you have the option to transfer the credit balance to another active Astro account. It will be considered as payment to that account and is subject to Astro's terms & conditions.

Once you have submitted your e-invoice request, it will be processed and you can receive the application results through My Astro website or app. Some applications may take longer to process due to unforeseen circumstances. We strongly advise you to provide your TIN number to facilitate the e-invoice issuance process.

The Astro Fibre App is supported on all iOS devices version 16 or later and Android devices version 9 or later. To download the app, you may visit your mobile app store and search for “Astro Fibre App”. Alternatively, you may install the app on your mobile device by clicking here (Google Play Store) or here (iOS App Store).

STEP 1

Choose your language preferences for both Menu Language and Info Language. Then, press "OK".

STEP 2

Select you box operating mode and press "OK".

STEP 3

Select the resolution supports by your TV and press "OK".

STEP 4

Press "OK" to proceed to the next screen.

STEP 5

Please select the LNB type and press "OK".

STEP 6

Select this as the Entry Point and press "OK" to confirm your selection.

STEP 7

Signal reading results for Tuner 1 and Tuner 2 screen will be displayed. Then, press "OK" to proceed to next screen.

STEP 8

Select Yes, continue and press "OK" to connect to Wi-Fi network.

STEP 9

Please wait while the box scanning for the available Wi-Fi network.

STEP 10

Select your Wi-Fi network and navigate to "Connect".

STEP 11

Please enter the password to connect to your network and press "OK".

STEP 12

You are successfully connected when this screen appears.

Customers can enjoy major European football leagues, over 3,000 hours of live tennis and other global sporting events LIVE and on-demand on the app. You may check out the complete list of competitions available on the app here: beIN SPORTS CONNECT | Live Leagues and Competitions | LaLiga, Serie A, Ligue

You will be able to enjoy all the content on WeTV via your Ultra/Ulti Box,

wetv.vip

and the WeTV mobile app immediately upon successful purchase from the Astro website. Please ensure that the mobile number used to log in to the app is the same one used to purchase your WeTV VIP subscription.

Want to return your Ultra or Ulti Plug & Play Box? It's simple and free!

Here's what you can do with your unused Ultra/Ulti Plug & Play Box:

1. Return your device to us via Arranged Pick-up:

Step 1: Please call Astro's Contact Centre at 03-9543 3838 to schedule an arranged pick-up by one of our courier partners.

Step 2: Just sit back and relax! A courier agent will come to your doorstep to retrieve the devices.

Redemption should be done by the account holder. However, if the account holder is unavailable, immediate family members can make the redemption provided that the account holder has given them the permission to redeem using his account credentials.

Customers will still be charged a penalty of RM 100 (exclusive of Sales and Service Tax), as per our terms and conditions, as the Astro Box & SIM Card are properties of Astro.

Upgrade to Sun NXT Premium via www.astro.com.my/sunnxt or the MyAstro app. For further assistance, contact our customer service at 03-9543 3838.

Netflix is available to IPTV customers on the Ultra Box and Ulti Box. Non-Ultra Box customers will not be able to access Netflix on CH741. Please upgrade to the Ultra Box/Ulti Box to access Netflix on the Ultra Box.

No, the quality of your video depends on the speed and reliability of your internet.

STEP 1
Check the internet connectivity by run the Test Connection.
Refer Run Test Connection.

STEP 2
Verify the average speedtest based on the Test Connection result.
a. Above 10Mbps - Proceed to STEP 5
b. Less then 10 Mbps - Proceed to STEP 3

Notes: Minimum 10 Mbps internet speed from box requires in order to get a stable connection.

STEP 3
Check the connection to the box either using Ethernet (LAN cable) or Wi-Fi.
a. If using Ethernet (LAN cable) - Connect to Live Agent for help.
b. If using Wi-Fi - Proceed to STEP 4



STEP 4
Check location of the decoder and router.
a. If nearby (within 1.5m) - Try connect to box from router using LAN cable.
b. If far (more than 1.5m) / No LAN cable - Proceed STEP 5



STEP 5
Reboot router, modem and decoder.
If issue persist, please try again after 30mins to 1 hour. Connect to live agent if persist after 30 mins to 1 hour.

Starting 7 October 2026, Disney+ will transition to a new Disney+ app experience. Astro customers can continue enjoying Disney+ via Astro with no changes to their Disney+ subscription or monthly fee.

Customers who stream via Astro Ultra or Ulti Box will have the new app made available automatically, while customers who stream on personal devices will simply need to download the new Disney+ app to continue watching Disney+.

Existing customers can sign in using the same email address or mobile number associated with their existing Disney+ account.

For further information and support relating to the Disney+ app experience or app-related features, please visit the Disney+ Help Centre.

Yes, subtitles are available. Sun NXT offers English subtitles for most of the movies released in the year 2024 and onwards.

Byond Box (DMT 5)

STEP 1

Switch on the power for your box and make sure that the adapter's power light is on.

STEP 2

Put the box on standby mode.

STEP 3

Press and hold the Home button on the box.

STEP 4

Wait until "boot" appear on the front panel and released.

STEP 5

New Installation Settings page will appear.

Click here for the guides to complete the setup.

Byond Box (DMT 4)

STEP 1

Switch off the power of your box and ensure the adapter�s power light is off.

STEP 2

Switch on the power of your box and ensure the adapter�s power light is on.

STEP 3

Press and hold the Ch+ and Ch- keys on the box simultaneously when the "boot" message appears on the front panel.

STEP 4

Wait until the "Clr" message appears on the front panel, then release the Ch+ and Ch- keys.

STEP 5

New Installation Settings page will appear.

Click here for the guides to complete the setup.

Byond Box (Zapper)

STEP 1

Ensure your box is on standby mode. (Red light on box's front panel).

STEP 2

Press and hold the Standby button. Wait until the LED at front panel change from red to green for 3 times, then release the button.

STEP 3

New Installation Settings page will appear.

Click here for the guides to complete the setup.

Byond Box (New Zapper)

STEP 1

Switch off the power of your box and ensure that the adapter�s power light is off.

STEP 2

Switch on the power of your box and ensure that the adapter's power light is on.

STEP 3

Keep pressing the 'Power' button until the Startup Option screen appears.

STEP 4

Press "369" on the remote control to trigger refresh box setting menu.

STEP 5

Press "OK" to proceed. The box will be refreshed to the original setting.

STEP 6

New Installation Settings page will appear.

Click here for the guides to complete the setup.

The storage requirement is dependent on the type of videos users are downloading as the space needed varies between titles.

If you are interested to upgrade your box, you can do so via Astro's retailers or online as follows:

I. Visit https://hub.astro.com.my/#5

II. Select `Box Upgrade` and log in with your Astro ID

III. Select the box you would like to upgrade

For customers with the Ultra or Ulti Box, you are required to return only the Astro box along with the Smart/SIM Card. There is no requirement to return the remote control, power cables or satellite dish/outdoor unit (ODU).

For customers on other Boxes, you are required to discard them (and their accompanying devices such as the Smart/SIM Card) only at registered collection centers for proper handling and management of e-waste in an environmentally sound manner. Click here to find a registered collection center near you.

For Ultra/Ulti Plug & Play Box installation, it is recommended that you attempt to self-install by following the installation guide here, but there is an option to request for an installer to install the box at your premise. However, there will be a separate fee for this service request.

1. Unifi netis brand

The following shows an Interface based on Unifi router

1. Launch Web Browser and enter the default's gateway's IP address (192.168.1.1) in the address bar.

1. Enter Username and Password.
   1. Username = tmadmin
   2. Password = Adm@xxxx (xxxx refers to last four digits of MAC address)

1. Choose WLAN -> wlan0 (2.4GHz) Basic Setting. Note down on SSID.

1. Choose WLAN -> wlan1 (5GHz). Compare SSID with previous SSID.

1. If SSID for wlan0 (2.4GHz) and wlan1 (5GHz) are the same. Change wlan1 (5GHz) SSID by adding number 5(i.e. ifuni_5G) to differentiate from 2.4 GHz. Click Apply Changes.

Note: Connection to Wi-Fi may be temporarily loss while the changes is updated.

You may view your current subscription details or the channels and packages you are currently subscribed to via My Astro App or My Astro Web. Just login to your accmyastro.astro.com.my/download/ount and click on Manage Subscription to view.

No, there will not be any fees if you change your current Asian Favourites selection to Viu
Premium. You may also switch between Asian Favourites options once every billing cycle.

Yes, there are five digital bill platforms available for all customers to check their Astro bills:

A. My Astro app

1. Download the My Astro app

2. Login using your Astro ID

3. Go to Account > Bills

4. You will be able to see your outstanding bill amount, make payment, download bill statements, and view payment history all in one app.

B. My Astro web

Alternatively, you can use the web version

C. Astro Quick Pay

1. Visit https://pay.astro.com.my

2. Enter your 10-digit Astro Account Number and follow the instructions to view your bill, account status, pay bills or add a billing reminder on your Google calendar.

Note: You will not be able to download your bills or view payment history via Astro Quick Pay. For a better experience to manage your bills (To download bills or view your payment history), you can download the My Astro app.

D. IVR

1. Call +603-95433838

2. Press 1 for Account Related Queries

3. Input your 10-digit Astro Account no. or 12-digit MyKad no.

4. Press 2 for Payment and Billing

5. Press 1 to receive an SMS with your bill balance and a link to pay online

Note: You will not be able to download your bills or view payment history via Astro Quick Pay. For a better experience to manage your bills (To download bills or view your payment history), you can download the My Astro app.

E. Auto-Debit

Alternatively, please register for Auto-Debit by following the steps here for hassle-free payments.

💳 Want to manage your Astro bills easily?

📱 Download the My Astro app to:
- View and download bill statements
- Check payment history
- Pay in just a few taps

Payment for Astro services will not increase. However, the Service Tax applicable will be increased from 6% to 8% and this will result in an increase in the total amount payable.

Completing a CAPTCHA during activation is a standard security measure. It ensures that you are a real person and not an automated bot. This step helps protect your account from unauthorized access and ensures safe and secure use of the service. By verifying your identity, this step provides a better and more secure experience for all users

Yes, the iQIYI app is accessible globally. However, the content of the app might differ depending on the country which will be tailored based on local content rights and market preferences.

Your Astro GO email will be delivered to you within an hour upon checkout. Please click the link provided to set up your password and download the Astro GO app on your device by clicking here (Google Play Store) or here (iOS App Store). If you want to stream it directly via your computer or laptop, Astro GO is also available at astrogo.astro.com.my. Log in with your Astro ID and start streaming!

If your technical issue remains unresolved after completing the recommended troubleshooting steps or seeking assistance from customer support, a technician can be arranged to visit. The applicable charges are as follows:

i. In-contract customers: Free of charge (FOC)
ii. Out-of-contract customers: RM65 per visit.

Please contact your issuing bank for further information. Astro does not directly handle standing instructions. Please utilise our auto-debit facility if you would like hassle-free payments.

Yes, there will be a selection of titles available with Video On Demand (VOD) rights. Please note that VOD availability for movies is subject to content rights.

Yes, you can. On your Account page and go to Profile. Click edit on Service address to change your address details. You may also request for installation assistance if it's required for the new address.

Download My Astro app or visit the My Astro website.

You may cancel your ZEE5 Premium subscription here. Kindly note that we will not be able to offer a refund if you do decide to leave the ZEE5 app before your subscription period ends.

Yes. You can explore the My Astro app even if you’re not logged in. Click at “Continue as guest” to check out the app features before singing up or logging in.

However, if you're an Astro customer we recommend you sign up/login with your Astro ID for the best experience. Here's how to link your Astro account to your Astro ID.

Download My Astro app or visit the My Astro website.

The eKYC link is only valid for 3 days to complete the eKYC verification process. You will be required to submit a fresh Astro account application.

Starting 16 February 2024, you may be asked to perform Astro ID verification when you log in to their Astro account on digital platforms such as www.astro.com.my, Astro GO, My Astro etc. This 2-step process encompasses verifying your email address or phone number and re-entering of your existing password.

By changing from a higher contract duration e.g., 24-months commitment period to lower contract duration e.g., 12-months, a proration of the cancellation fee will be applicable whereby you will be charged per contract's month balance against the maximum cancellation fee agreed upon during sign up for the offer.

A proration of the cancellation fee will be applicable whereby you will be charged per contract's month balance against the maximum cancellation fee agreed upon during sign up for the offer.

You will start a new contract with 12-months commitment and receive the corresponding discount for that duration.

Check out how a cancellation fee is calculated with examples via this link:

For any NJOI-related information, please visit the NJOI Help & Support page at

https://purchase.njoi.com.my/en-support

Huawei HG8240

Huawei HG850A

FIBER HOME

ALCATEL LUCENT

HUAWEI

ZTE

Option 1

1. Please turn off all devices (Modem and Router). By restarting your modem, you can isolate the possibility of overloaded processes in the modem, which would impact its performance.
2. Ensure the fiber cable from your wall socket and modem is securely connected.

Modem connection with Fiber Cable

Modem connection with Copper Cable

Notes: You might be connected to LAN 1 if backbone is Maxis

Router connection

Technicolor Router

3. Please make sure the LAN cable is connected properly from router (Port 1-4 - Yellow port) to PC/Laptop.

4. If the issue persists, submit your feedback form and attach your modem light indicator picture/video for further assistance.

Option 2/ Option 3/ Option 5/ Option 6

1. Please turn off all devices (Modem and Router). By restarting your modem, you can isolate the possibility of overloaded processes in the modem, which would impact its performance.

2. Ensure the fiber cable from your wall socket and modem is securely connected.

3. Ensure both cables on the Modem (LAN Port 2) and Router (WAN Port - Red port) are properly connected.

Modem connection with Fiber Cable

Modem connection with Copper Cable

Notes: You might be connected to LAN 1 if backbone is Maxis

Router connection

Technicolor Router

3. Please make sure the LAN cable is connected properly from router (Port 1-4 - Yellow port) to PC/Laptop.

4. Please make sure both cables on Router (Any Yellow port) and Astro Decoder (Network Port behind decoder) are properly inserted.

DMT4 (Hybrid mode)

DMT5 (Hybrid mode)

DMT4 (IP mode)

DMT5 (IP mode)

5. Switch on modem and router and please wait for 2 minutes to stabilise the devices after reboot.

6. If the issue persists, submit your feedback form and attach your modem light indicator picture/ video for further assistance.

Option 4

1. Ensure Modem/Router are connected tightly to the power socket.

2. Try to use another power socket / power source to eliminate faulty power sockets/power sources which could cause the issue.

3. If the issue persists, submit your feedback form for further assistance.

1. Please standby computer/laptop to access to the internet and connection must be via LAN (cable) [Connect the LAN (cable) to the yellow port in Maxis Router and direct to computer/laptop].
2. You may open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox and etc.
3. On the address bar, please go to http://192.168.1.254 and below page will appear.

The default login of the router as below. If you have done a configuration on your router previously, the password may be different.

Username: user
Password: Router S/N (Available on the sticker at the back of the router)

4. Once you have successfully login, the router's web-based setup page will appear. Please follow below steps for the configuration.

5. From the left menu, choose Wireless 2.4GHz and then click Basic Settings tab on the left menu to access to below screen.

6. You may change the Wireless Network Name (SSID) and the SSID Password to follow your preferences, then click "Save" for the changes to take place.

Please reconnect to the new wireless name with the new password once completed.

7. Since this is a dual band router, you will have 2 Wireless Network Names (SSID) i.e. 2.4GHz and 5GHz. You may connect to any of the SSID, preferably with a stronger signal available.

You may change the Wireless Network Name (SSID) and the SSID Password to follow your preferences for 5GHz by choosing Wireless 5GHz then click Basic Settings.

Click "Save" for the changes to take place and reconnect to the new wireless name with the new password once completed.

No, you will not be automatically switched to the new pricing. To perform a manual switch, please contact us at 03-9543 3838.

This initiative is part of Astro’s “GO GREEN” journey, which was implemented to promote paperless billing and to play our part in protecting the environment. The objective of the Paper Bill Charge is to encourage our customers to opt for e-Billing as their preferred Bill Delivery Method, which is also a more convenient and efficient way to access and manage their bills. Hence, a fixed RM10.00 monthly charge will be applied to all existing and new Astro customers who opt for Paper Bills as their preferred bill delivery method.

No, you can only stream the beIN SPORTS CONNECT app on one device at a time.

For any technical issues, you may visit Astro's Help & Support page then scroll down to 2. Technical Troubleshooting - Ultra Box / Ulti Box

OR

Send Hi to our WhatsApp at 03-9543 3838. Then select Help & Support for assistance.