Prime Video is Amazon’s over-the-top (OTT) streaming and rental service that offers access to a wide range of content including, exclusive Amazon originals, blockbuster movies and hit shows.

The Download function offers an alternative to streaming so that you can watch TV shows and movies offline anywhere.

You can start downloading a movie/TV show by clicking on the "Download” button. Kindly note that you can only download one title at the time. Other titles will be in queue and will start downloading automatically as soon as the first download is complete.

Once you have downloaded a title, the progress icon will show “Complete” and you may find your downloaded content by checking “My Library” > “Downloads”.

*To save on data usage, we recommend downloading via Wi-Fi.

Downloaded content retention periods vary according to the type of content.

1. Each movie – minimum 2 Days
2. Each TV series episode - minimum 7 Days

The number of days left for you to view your content in offline mode is shown for each piece of downloaded content for your reference. Expired content will be automatically deleted from the app, freeing up your device storage.

STEP 1

Try to change channels on your Astro remote. Check the LED light.
If the LED is blinking 3 times or if it is not blinking, replace the batteries and proceed to STEP 2.
Otherwise, if the LED is blinking 1 time, your remote is working fine, let's proceed to STEP 3.

STEP 2

Check if you can change channels using your Astro remote control. You should no longer be experiencing this problem if is a battery issue.
If issue remain after batteries replacement, proceed to STEP 3.

STEP 3

You need to refresh the box setting manually from the box front panel.
Refer to Refresh Box setting (Clear NVRAM) - Ultra / Ulti Box.
If issue persist, please submit the issue on our Feedback Form.

Only new and existing Astro Fibre customers with the RG21 or RG31 (launching soon) router can use the Astro Fibre App.

Please contact us through one of our platforms found here or Self-serve by logging in to Astro Self-Service Portal within 3-7 days before moving out and we will sort everything out for you!

It will begin on 1st March 2024 and onwards.

Your bill will be waived upon request.

Yes. You can make payment using your credit card via My Astro Portal:

- For One-time payment: All Master/Visa 3D secured debit/credit cards for one-time payment issued by banks in Malaysia

- For Auto-Debit: All Master/Visa/AMEX debit/credit cards issued by banks in Malaysia

If you see the error message "There is No Internet Connection" while using the Astro app on your Smart TV, please follow these troubleshooting steps:

1. Check Your Internet Connection

• Confirm whether your Smart TV is connected to the internet via Wi-Fi or a LAN (Ethernet) cable.

2. Check the LAN Cable Connection (if using Ethernet)

• Ensure the LAN cable is securely connected from the router's LAN port to the TV's LAN port.
• Verify that the LED indicator lights on both the router and TV network port are active.

3. Test the LAN Cable

• Connect the same LAN cable to another device (for example, a laptop or another Smart TV).
• Check whether the device can access the internet to confirm the cable is functioning properly.

4. Reconnect to Wi-Fi (if using Wi-Fi)

• Go to your TV's network settings.
• Select your home Wi-Fi network and choose Forget Network.
• Reconnect to the Wi-Fi network by entering the password again.

5. Check Other Devices

• Verify that other devices in your home (such as smartphones, tablets, or laptops) can connect to the same Wi-Fi network.
• If all devices are unable to connect, the issue may be with your internet service.

6. Restart Your Devices

• Turn off and restart the following devices:

• Router
• Modem (if applicable)
• Smart TV

• Wait a few minutes for the internet connection to stabilize.
• Launch the Astro app again and test the playback.

If you are still having issues, proceed to submit report via WhatsApp or Feedback Form and provide:

• Astro ID use
• Smart TV model
• OS version
• Error reported on device

This will help our support team investigate and assist you further.

Astro subscribers will have the freedom to subscribe to Netflix via Astro, or they may also choose to continue subscribing via Netflix directly on their own.

Astro Cloud is a virtual storage that allows you to record and watch your favourite TV shows on Astro GO anytime, anywhere. Customers can enjoy 200 hours (500 GB) of cloud recording on Astro GO web and mobile app, and on your Astro Box (if applicable) at no additional cost.

To check your remaining Cloud storage space, go to Settings > My Devices, you will find your cloud storage information here.

You can upgrade your storage to a total of 1,500 hours (4000gb) with the Astro GO+ add-on for RM 5.99/month.

Kindly visit https://myastro.astro.com.my/ or call us at 03-7490 8102 to upgrade your storage plan.

The Multi-user Profile feature allows customers to create individual profiles within their Astro Box and Astro GO with the following personalisation:

• Personalised Recommendations
• Continue Watching
• Watch List
• Last Viewed Channel
• Favourite & Blocked Channels

The MUP feature is a great way to allow individual users to tailor personal Astro experiences whilst using a shared device (e.g.: Astro Box) in the household, providing them with better personalised recommendations and encouraging better content discovery.

If you subscribe to the same or higher Disney+ plan through Astro and activate it using the same login credentials (i.e. email address or mobile number and password) associated with your existing Disney+-billed subscription, your personalised viewing data (e.g. Watch History, Watchlist etc.) will be retained.

While this technology has its benefits, different devices at home have different reaction and response to changes in signal strength and quality, and it's almost impossible to predict if they will make good band choices due to the interaction between the devices and the Wifi router. Some smart home devices also recommend that band steering is not used due to various reasons such as needing a constant consistent connection, ability to only connect to a particular band, registration of the respective MAC address, etc..

Example:

As single SSID is used, the device may remain on a weak 5GHz network instead of switching over to stronger 2.4GHz network.

Astro's Plug & Play Box is our latest box where users can enjoy the latest Astro box simply by connecting it to the TV and internet. There is no longer a need to schedule or pay for an installation. By connecting your Plug & Play Box to home broadband, you will be able to-do the following:

• Watch your channels over the Internet. No more rain fade!
• Never miss your favorite shows again as you can stream LIVE events from the beginning, or simply pause and resume the program as you wish.
• Access a library of over 110,000 videos on demand. Catch-up or binge-watch full episodes whenever you like.
• Access your recordings anytime on TV or the Astro GO app via Cloud Recording.

Other features include pause on TV and continue watching on the Astro GO app, enhanced search capabilities and more.

You can cancel your WeTV VIP subscription via WeTV’s official website or mobile app.

Kindly note that we will not be able to offer a refund if you do decide to leave the WeTV app before your subscription period ends.

If you require any assistance with the app, you may:

1. Visit the WeTV official Facebook Page for more information: WeTV Malaysia - Home | Facebook; or

2. Drop the WeTV team a message via Facebook chat here

If you encounter any issues with your Astro billing and entitlement, you may contact our Customer Service by:

1. Submitting a feedback form here: www.astro.com.my/contactus/form; or

2. Reaching to us via WhatsApp by typing "Hi"at 03-9543 3838

STEP 1

Switch OFF the power of your Ultra / Ulti box and make sure that the adapter's power light is off.

STEP 2

Switch ON the power of your Ultra / Ulti box and make sure that the adapter's power light is on.

STEP 3

On your remote control, press the standby button repeatedly until the Startup Options appear on TV.

STEP 4

Press "1".

STEP 5

Press "1" if your box setup under Satellite Mode.
Press "2" if your box setup under Plug and Play Mode.

STEP 6

The Software Update progress screen will appears.

The update will take 10 - 15 minutes to complete.

Please be patience.

Astro customers can make payments via My Astro app, Auto-debit, WhatsApp,Astro Quick Pay and other authorised payment channels withoutsurcharge for the easiest and fastest way to pay their Astro bills.

Bill payments at selected petrolstations, convenience stores, retail/mobile shops, kiosks, and e-Wallets, may incur a surcharge of up to RM0.50 per transaction by the appointed collection agencies of RMS (Razer), ATX, MobilityOne and e-Pay.

The surcharge is imposed by third-party payment collection partners for services rendered.

You can refer to all our payment options below. Those marked with ‘*’ will be subject to a surcharge by appointed collection agencies.

A. ASTRO SELF-SERVICE METHODS

My Astro App:

1. Download My Astro app
2. Login with your Astro ID
3. Go to Account > Bills
4. You will be able to see your outstanding bill amount, make payment, download bill statements, and view payment history all in one app.

My Astro Web:

1. Alternatively, you can use the web version
2. Note: We recommend downloading the My Astro app for a better experience

Astro Quick Pay:

1. Visit pay.astro.com.my.
2. Just enter your 10-digit Astro Account Number and proceed with the instructions that follow.
3. Note: You will not be able to view your payment history on WhatsApp. For a better experience to manage your bills (To view your payment history), you can download the My Astro app.

B. OTHER HASSLE-FREE METHODS
Auto-Debit: Click here for step-by-stepinstructions on how to activate auto-debit payment via My Astro app.

JomPAY: Look for the JomPAY logo on your latest bill, log into your preferred online banking platform, and submit your payment details.
• Biller Code: 9639 (unique to Astro only)
• Ref-1: <10-digit Astro account number> (E.g. 08XXXXXXXX)


C. BANKS

Maybank:

• ATM
• Online banking

Visit maybank2u.com.my for more information.


Public Bank:

• ATM
• Cash Deposit Machine & Cheque Deposit
• Online banking

Visit pbebank.com for more information.


Bank Simpanan Nasional:

• ATM
• Cash Deposit Machine
• Online banking
• SMS banking
• BSN Ejen Bank Berdaftar (EBB)
• Over-the-counter payments

Visit mybsn.com.my for more information.


Agrobank:

• ATM
• Online banking
• Over-the-counter payments

Visit agrobank.com.my for more information.

D. e-WALLETS

ATX*
Boost, GoPayz, KelantanPay, Zcity (GEM REWARD), SabahPay, Tapay, GoPay,MerchantTradeMoney, ToneGroup, Elinking, Mpay, Mcash, and other various smaller wallets.

e-Pay*
Touch n Go (TnG), Grab Pay, Shopee, BigPay, True Money

E. OTHER METHODS

Associated Retailers:

RMS (Razer/ MOL)*
7-Eleven, 99 Speedmart, Caring Pharmacy

ATX*
RedONE Shop, Mobile Money, Runcit Hero (telecommunication shops), Parcel Hub (courier shops), Kiosk, DHL

Mobility One*
Kedai D’mart, Happy Mart, Pasaraya Sakan, PusatKomuniti Desa (PKD), Aeon Big and various sundry shops

e-Pay*
Petrol stations (Petronas, Shell, BHP, Caltex, Petron), KK Mart, Mydin, MyNews, SenHeng, Hai-O, Giant, TF ValueMart, Billion, Big Pharmacy

💳 Want to manage your Astro bills easily?

📱 Download the My Astro app to:
- View and download bill statements
- Check payment history
- Pay in just a few taps

Yes, you can choose the other Astro Packs, which do not have Netflix bundled together. However, any changes in your Astro Pack are subject to the terms & conditions.

Currently, there are no rebates provided when you sign-up for the Ultra/Ulti Plug & Play Box.

1. Please standby computer/laptop to access to the internet and connection must be via LAN (cable) [Connect the LAN (cable) to the yellow port in Maxis Router and direct to computer/laptop].

2. You may open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox and etc.

3. On the address bar, please go to http://192.168.1.254 and below page will appear.

If below box appear, please enter required details as below:

USERNAME: Administrator

PASSWORD: (ACCESS KEY AT THE RGW STICKER)

(These are the defaults, if you have done previous configuration on your router the password may be different)

4. Once enter into the page ‘’TECHNICOLOR TG784N V3’’, you may follow below step for the wireless information.

i. Click "Configure”

ii. Once clicked configure button, below screen will appear.

A. This is your current password. Please delete and enter the new password.

B. Once completed the selection; click the "Apply" button. Router will auto reboot and connection re-establish after few minutes.

Please re-connect your wireless using the new password.

If your Astro box displays an error message on your TV that says:
- Unable to Play Video (HDCP Failed)
- Your HDMI configuration is preventing the video from being displayed. Please ensure that your HDMI cable is connected to HDCP-capable TV. Please check with your TV manufacturer or qualified technician if your problem persists. (HDCP 2)
- The selected HDMI port on your TV does not support HDCP version required for programme playback. Please check with your TV manufacturer or qualified technician if your problem persists.
HDCP 2.2 support required for 4K UHD and HDCP 1.4 for others (CDE:2)

Error code: HDCP 0, HDCP 1, HDCP 2, CDE:2

Note: To view 4K UHD content on your Ultra Box, your 4K TV must be HDCP 2.2 compliant. If you are using a non-4K TV, it is likely not HDCP 2.2 compliant.

If you are certain your TV is HDCP compliant and the error persists, try the troubleshooting steps below:

STEP 1
Switch off the power of your box and make sure that the adapter’s power light is off.

STEP 2
Unplug the HDMI cable from your TV and plug it back in securely to other available HDMI port.

STEP 3
Switch on the power for your box and make sure that the adapter’s power light is on.
Please wait for 5 minutes.

STEP 4
Turn on your box. Do select the correct TV input.
You should no longer be experiencing this problem.

Astro customers can subscribe to Simply South at only RM10.00 per month (excluding tax).

Yes, you will. Customers who purchased Astro First / Astro Best / Pay-per-View event in February 2024 with a viewing period in March 2024 will be charged an 8% Service Tax in their next bill.

Astro GO+ is a service add-on that:

• Enables the simultaneous viewing of Astro GO for up to 4 users/devices.
• Increases the cloud recording storage from 200 hours up to 1500 hours.

The Malaysia Communication and Multimedia Commission (MCMC)has issued a directive to all telecommunication companies (telcos) to block the sending and receiving of SMS with URL links. The move is aimed at preventing users from becoming victims of online scams. This exercise is applicable for all person-to-person SMS with URL links sent to or received from local and international mobile numbers, which has already taken effect as of 2 May 2023.

Please use your Astro ID to log in to the Astro Fibre App. If you do not have an Astro ID, kindly follow the simple steps here to create one.

When playing content from the Video On Demand library, a 15-second or 30-second video advertisement(s) will be shown before the On Demand programme starts. All advertisements will display a countdown to indicate the time remaining on the advertisement(s) and will not be skippable.

To find out more information on Astro GO advertising, please click here.

Yes, effective on bill date 9^th July 2024 onwards, the Service Tax for Astro Broadband Bundle/Astro Fibre Bundle will be streamlined at 6%. Astro Fibre Standalone and Mesh WiFi charges will remain at 6% Service Tax as announced on 1^st March 2024.

Mac OS X

1. Click the Go tab in the top menu bar and select Utilities from the drop-down menu.

2. Type "network utility" in the search bar in the top right-hand corner of the Utilities window and then hit the "Enter" key on your keyboard. 

5. For Traceroute Test, select the Traceroute tab and then type the address you like to traceroute in the text box. Click Trace and wait for the traceroute results.

Windows 10

1. Click the Search icon (magnifying glass) in the bottom left-hand corner and type "cmd" into the search bar.

2. Select the Command Prompt app - it will be at the top of the list of search results as the best match.

3. A black box with a flashing cursor will open; this is the Command Prompt.

For Ping Test, type "ping" and then hit the Space bar on your keyboard. Type in the address you like to ping and then hit the Enter key on your keyboard. Wait for the ping results.

For Traceroute Test, type "tracert" and then hit the Space bar on your keyboard. Type in the address you like to trace and then hit the Enter key on your keyboard. Wait for the tracert results.

Windows 7 & Vista

1. Open the Start menu by clicking the Windows icon at the bottom left-hand corner of the screen.

2. Type "cmd" in the search bar at the  bottom of the menu.

3. Click cmd found in the search results for Programs.

4. A black box with a flashing cursor will open; this is the Command Prompt.

For Ping Test, type "ping" and then hit the Space bar on your keyboard. Type in the address you like to ping and then hit the Enter key on your keyboard. Wait for the ping results.

1. Move the mouse to the right-hand corner of the screen to make the vertical menu bar (charm bar) appear. Click Search.

2. Type "cmd" in the search bar and hit the Enter key on your keyboard.

4. A black box with a flashing cursor will open; this is the Command Prompt.

For Ping Test, type "ping" and then hit the Space bar on your keyboard. Type in the address you like to ping and then hit the Enter key on your keyboard. Wait for the ping results.

Windows XP

1. Click the Start button in the bottom left-hand corner of the screen.

2. Click the Run option in the right-hand column.

We would need you to run few tests in order for us to understand your issue and to assist you in fixing the problem.

This will not take longer than 15 minutes.

1. Please run each of the test using your laptop or personal desktop by connecting to your Astro Fibre.
2. Please list down the impacted website (Provide us the complete URL i.e. www.astro.com.my).
3. We need you to run below tests and compile the pictures or screenshots of your test results into one file (i.e Microsof Word document, PDF file) and send to our agent in order for us to assist you further:
   • Run the Ping & Traceroute Test - For guidance, please click here for Ping & Traceroute Test guideline.
   • You may run this by connecting via WiFi or LAN cable. Your test result will appears as per below screen and take a screenshot.

Ping Test Result

Traceroute Test Result

• Run the Speed Test - For guidance, please click here for Speed Test guideline.

We need you to run the Speed Test using both WiFi connection and LAN cable.

Speed Test Result

4. Once you've gathered all the results, attach in Feedback Form for further assistance.

Quick Info
A Speed Test is a service that provides free analysis of Internet access parameters, such as connection data rate.
A Ping Test shows how long it takes for packets to reach host.
A Traceroute Test traces the route of packets to destination host from our server.

Want to return your Ultra or Ulti Plug & Play Box? It's simple and free!

Here's what you can do with your unused Ultra/Ulti Plug & Play Box:

1. Return your device to us via Arranged Pick-up:

Step 1: Please call Astro's Contact Centre at 03-9543 3838 to schedule an arranged pick-up by one of our courier partners.

Step 2: Just sit back and relax! A courier agent will come to your doorstep to retrieve the devices.

Zee5 is the only app that has a change in price upon the SST increase. Prices of Netflix, Disney+ , Viu, iQIYI, WeTV and Qalbox will not be affected.

You may click here and follow the steps shown below to create you Astro ID.

SST of 6% and 8% will be applied accordingly to your bundle services:

1. 8% SST to Astro TV Pack
2. 6% SST to Astro Fibre

Yes, you may assign your family or friends to help you drop off the Astro box.

By keying in the 10-digit account number, Astro will be able to provide better self-service options, as it allows Astro to customise automation options based on the needs of each customer's account.

If you choose to self-install the Plug& Play Box, then no installation fee will be charged. However, there will be an activation fee (please refer to the table below)

If you choose to have an installer to install the Plug & Play Box, then an installation fee will also apply.

You will continue to have access to Disney+ until the end of your current subscription cycle. After that, you will no longer be able to access Disney+ through Astro.

The Kids Friendly Profile is an enhancement to the Kids User Profile feature with the following major improvements:

1. PIN control for the Kids Profile: When switching from a Kids Profile to an adult profile (i.e.: Father or Mother), a PIN entry will be required.
2. Limited Kids Profile Content Search: Only Kids age-appropriate content can be searched and displayed within the Kids Profile.
3. Kids Profile Based Recordings: Kids Profiles will have their own personalised age-appropriate recordings without any overlap with other user profiles. This feature will be available from 17th August onwards.

These enhancements are available across the Astro GO app, Ultra/Ulti Box, and Multiroom Box/Smart TV app.

Click here to find out more on this new feature and how to use it!

The change in due date to 25 days after your billing date is to ensure that your transactions will be processed in a timely manner and subsequently ensure you will enjoy uninterrupted viewing. Please be assured that this change will not affect your monthly bill amount. Kindly check your latest monthly bill statement for more details about this revision.

Please check your internet speed and connection status via internet connection test. If your internet is working fine and the issue persists, proceed to submit report via WhatsApp or

Feedback Form

.

You have exceeded the maximum number of registered devices allowed. To manage devices on Astro GO, go to Settings > Registered Devices to view / remove devices from the list of registered devices to your account.

If you are still having issues, proceed to submit report via WhatsApp or Feedback Form.

If you receive the "Device Was Not Found" error message, it may be because your device has been automatically removed due to concurrent streaming limits being exceeded.
Please perform the following checks and troubleshooting steps:

1. Stop streaming on one of the other devices currently using your Astro account.
2. Close the Astro Go app on any unused devices.
3. Return to your Smart TV and try streaming again.

If you are unable to remove a device or continue to see the error message, proceed to submit report via WhatsApp or Feedback Form and provide:

• Astro ID use
• Smart TV model
• OS version
• Error reported on device

This will help our support team investigate and assist you further.

Yes, Prime Video is available to Astro customers through the following options:

• Included at no additional cost for customers on the Ultra/Ulti Box with either the Astro One Epic Pack or Movies Pack as part of your subscription bundle.
• Available from 24 June 2025 at no additional cost for customers not on the Ultra/Ulti Box but subscribed to either the Astro One Epic Pack or the Movies Pack as part of their subscription bundle.

If you see either of these error messages below as in the image, it means your account has been temporarily locked after 3-time trial for security reasons. To resolve this issue and reset your account, please call Prime Video support team directly at

+1-206-577-1364

or

1-206-577-1364.

They’ll help you verify your identity and restore access.

Once you have received the eKYC link, you need to complete the verification within 3 days.

You may report the incident on WhatsApp at 03-95433838 by typing PNP and our dedicated agents will attend to your matter. Please have your Airway Bill tracking numbers ready for validation.

If a replacement box/Astro SIM card is deemed necessary, a new Plug &Play Box and a new Astro SIM card will be couriered to your service address.

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Settings.

STEP 3

Navigate to Menu Language and press "OK".

STEP 4

Navigate to your preferred language selection and press “OK”.