If you receive this error message while activating Astro Smart TV, please follow the steps below:

1. Ensure that you have entered the sign-in code exactly as displayed on your TV screen.

• The code must be exactly 8 characters long.
• Do not enter fewer or more than 8 characters.

2. Check the code carefully before submitting.

• The activation code can be entered in uppercase or lowercase.
• The code will be accepted with or without dashes (-), as long as the characters entered are correct.

3. If the issue persists

• Refresh the activation screen on your Smart TV to generate a new code and try again.

If you are still having issues, proceed to submit report via WhatsApp or Feedback Form.
This will help our support team investigate and assist you further.

Yes, you will need to activate SecureGo again if you're on a new device.

When you activate SecureGo on a different device, you will receive an email to notify you that the device has been de-registered. 

If you suspect that someone else has gained access to your phone, contact our customer service immediately at 03-9543 3838 to unlink your Astro ID. 

If you are unable to scan the QR code displayed on your Smart TV, please use the alternative sign-in method:

1. On your mobile phone or computer, open a web browser and visit: https://astro.com.my/tvapp

Note: Ensure your mobile device/computer has an active internet connection and that you enter the code exactly as shown on the TV screen.

2. Enter the sign-in code displayed on your TV screen.

Landing screen on Smart TV

Landing screen on the Smart phone

3. Log in using your registered Astro ID.

4. Once successfully logged in, your Smart TV should automatically sign in and you can continue using the Astro Smart TV app.

If you are still having issues, proceed to submit report via WhatsApp or Feedback Form and provide:

• Astro ID use
• Smart TV model
• OS version
• Error reported on device

This will help our support team investigate and assist you further.

We would highly recommend for you to pre-pack your Astro Box equipment before taking it to our courier partner branch. However, if you unable to pre-pack the Astro Box, you can bring the equipment to the nearest courier partner branch for assistance.

STEP 1

Switch OFF the power of your Ultra / Ulti box and make sure that the adapter's power light is off.

STEP 2

Switch ON the power of your Ultra / Ulti box and make sure that the adapter's power light is on.

STEP 3

On your remote control, press the standby button repeatedly until the Startup Options appear on TV.

STEP 4

Press "1".

STEP 5

Press "1" if your box setup under Satellite Mode.
Press "2" if your box setup under Plug and Play Mode.

STEP 6

The Software Update progress screen will appears.

The update will take 10 - 15 minutes to complete.

Please be patience.

You can add a reminder to pay your bill, on your Google Calendar with one click. Enjoy uninterrupted services, by remembering to pay your bill on time.

Astro X3 Packs are available in two contract options:

1. 12-Month Contract Plan – Customers are required to fulfil a one-time 12-month contract commitment. There is no contract renewal required after contract expiry.
2. No-Contract Plan – Customers who prefer greater flexibility may subscribe to a no-contract option, which will be available from December 2026 onwards.

Please contact your issuing bank for further information. Astro does not directly handle standing instructions. Please utilise our auto-debit facility if you would like hassle-free payments.

Yes, customers will be charged 8% Service Tax for packages purchased after 29th February due to the implementation of the 8% Service Tax starting 1st March 2024.

No there will not be any penalty.

For the Multiroom subscription on a box setup, if your subscription is within the 24-month contractual period. Then a pro-rated penalty of RM600 will be applied for any Astro box except for Ultra Box, which the penalty will be RM1,000.

For multi-frequency customers, RM10.00 is charged per physical bill generated.

You can access up to 3 concurrent screens, including your Ultra Box/Ulti Box. Each subscription allows you to register up to 5 devices. To ensure a smoother streaming experience, please sign out from any unused devices.

You will be charged 8% Service Tax on Astro Pay TV services rendered on or after 1st March 2024, whereas your Astro Fibre including Mesh will remain at 6% Service Tax.

1. For WiFi connection:
   • For Internet speeds up to 300Mbps, the user needs to have minimum WiFi 802.11n (5GHz) capabilities
   • For Internet speeds up to 500Mbps, the user needs to have minimum WiFi 802.11ac (5GHz) capabilities
   • For Internet speeds up to 800Mbps, the user needs to have minimum WiFi 802.11ax (5GHz) capabilities
2. For Wired connection:
   • The users need to use Cat5e Network cable or better and have their device equipped with 1Gbit Network Interface Card (NIC)
3. A summary of the minimum specifications for devices as tabulated below:

1. Number of WiFi antennas in the client device
2. Distance and WiFi signal strength between client device and RGW/Mesh AP
3. Overall WiFi signal congestion/pollution in area
4. Total number of devices connected to the RGW/Mesh AP

Remarks: As a note, even meeting those minimum requirements, it is not a guarantee that devices connected over WiFi will be able to take advantage of the maximum subscribed speeds due to one or more of the following:

• Distance from the RGW/Mesh AP
• Client's Wi-Fi hardware specifications/capabilities
• Overall Wi-Fi signal quality in the area

Please check your internet speed and connection status. If your internet is working without any issues, please logout & login into the app again.

If you are still having issues, proceed to submit report via WhatsApp or Feedback Form.

For more information you may visit

https://www.hasil.gov.my/en/e-invoice/

OR call the IRBM help desk line at 03-8682 8000 OR email them at [email protected]

[email protected]

.

Once you have received the eKYC link, you need to complete the verification within 3 days.

Yes, you can. On your Account page and go to Profile. Click edit on Service address to change your address details. You may also request for installation assistance if it's required for the new address.

Download My Astro app or visit the My Astro website.

The recommended home internet speed for a smooth viewing is 30Mbps.

Watch this video or follow below steps to fix your WiFi connectivity issue

Skyworth RG21

1. Please connect your computer or laptop to your Astro Fibre router using WiFi or LAN cable. Your LAN cable must be connected from the yellow port of Astro Fibre router (Any available port).
2. Once connected, open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox and etc.
3. On the address bar, type http://192.168.100.254 and below page will appear.

Login using your username and password if you have changed the router login setting. Otherwise, your default router login is as per below.

Username: user
Password: user

4. Once you have successfully logged in, the router's web-based setup page will appear.

5. At the top of the page, click WLAN to configure the WiFi parameters.

6. To change the channel on 2.4G, click the drop-down arrow for Channel, then select your desired channel.

7. Then, click "Save & Apply" for the changes to take place.

8. You may make the same changes for 5G by click the drop-down arrow for Channel, then select your desired channel.

9. Then, click "Save & Apply" for the changes to take place.

The following Smart TV models are supported:
a) Samsung TV (2020 models and above) with Tizen OS 4.0+

b) LG TV (2020 models and above) with WebOS 4.0+

c) Android TV (Android 8.0 and above)
Please refer to the complete list of Android TV brands supported by the Astro Smart TV app below:

*Also supported on Google TV, Oppen, CAIXUN, Mecoo

If you did not receive the recovery email or verification code, please make sure that:

1. You are entering the correct email address or mobile number you used to register for your Astro ID.
2. Check your junk mailbox or spam folder.

To find out which email or phone number you have used to register your Astro ID, you may submit a feedback form. Kindly select feedback type "I have an enquiry/issue with Apps" choose "Astro GO"

We will get in touch with you within 48 hours to solve your enquirie

Please refer to the Welcome Card inside the Plug & Play Box package and scan the QR code. You may choose to watch either the self-installation video or the Augmented Reality (AR) Installation Video to activate your Plug & Play Box. You can also download the Installation Guide from the Astro Get Started Page.

Please install and activate your Plug & Play Box within 7 days of receiving your Plug & Play Box and Astro SIM card. If you are unable to activate your Plug & Play Box within 7 days, the Plug & Play Box will be automatically activated by Astro on the 8th day.

The billing and warranty of the Plug & Play Box shall begin on the same date of which the Plug & Play Box is activated.

In the event that you have ordered more than one (1) Plug & Play Box, please refer to the Astro SIM card letter (included with the Astro SIM card delivery) to match the right Astro SIM card to the respective Plug & Play Box. Each Astro SIM card has been paired with a specific Plug & Play Box, thus the correct matching of box and SIM card is required for it to work properly.

Your Astro Rewards tier is based on how long you've continuously been an Active Astro Pay TV customer:

• Magenta: 0 - 2 years
• Silver: >2 - 9 years
• Gold: >9 - 15 years
• Diamond: >15+ years

The rewards you will receive depends on which tier you're in. Rewards are cumulative: If you're in Diamond tier, you will be able to enjoy all the benefits from Magenta, Silver, and Gold tiers.

You can check the tier you are entitled to via the My Astro app. Here's how:

1. Download the My Astro app
2. Login using your Astro ID
3. Go to Rewards
4. You can see your tier at the top of the page. Tap on it to see more info

If you cancel your Astro Pay TV services but resubscribe at a later date, your duration (year) with us will reset to zero and restart according to your new activation date. Your Astro Rewards tier will reset to Magenta.

Users can easily access all their streaming Apps such as Netflix, Disney+, Viu etc by clicking the “APPS” button on their remote control. After clicking this button, they will be brought to the Apps rail under the home page.

The beIN SPORTS CONNECT app is not available as an add-to-bill option. Please visit

www.product.astro.com.my/tv

to sign up to one of our TV Packs with the Sports subscription.

1. Please standby computer/laptop to access to the internet and connection must be via (cable) [Connect the LAN (cable) to the yellow port in Maxis Router and direct to computer/laptop].
2. You may open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox and etc.
3. On the address bar, please go to http://192.168.0.1 or www.tplinkwifi.net and below page will appear.

4. Once you have successfully login, the router's web-based setup page will appear. Please follow below steps for the configuration.

6. Since this is a dual band router, you will have 2 Wireless Network Names  (SSID) i.e. 2.4GHz and  5GHz. You may connect to any of the SSID, preferably with a stronger signal available.

7. You may change the Wireless Network Name (SSID) and the Password to follow your preferences, then click "Save"  for the changes to take place.

Please reconnect to the new wireless name with the new password once completed.

If an error message on your TV has one of the following keywords:
- Channels are temporarily unavailable due to bad weather.
- Service Currently Not Available
- SCNA
- (Code: SCNA)

You can proceed with below troubleshooting if the weather is good. Otherwise, you may try again later.

STEP 1: Check Weather Conditions

If the weather is bad, wait until it clears before proceeding.

STEP 2: Access STB Diagnostics

2a. Press the Home button on your Astro remote.

2b. Navigate to Settings and press OK.

2c. Navigate to STB Diagnostics and press OK.

STEP 3: Check Signal Strength

Refer to the signal strength % shown on the top left of your screen.

If it is 65% or higher, please take the screenshot and submit your Feedback Form.

If it is below 65%, please go to Step 5.

STEP 4: Power Off the Box

Switch off the power for your box and make sure that the adapter’s power light is off.

STEP 5: Reconnect Satellite Cable

Unscrew the satellite cable from the box and pull it out.

Plug the satellite cable back into the box and screw it back securely.

STEP 6: Power On the Box

Switch on the power for your box and make sure that the adapter’s power light is on.

Please wait for 5 minutes.

STEP 7: Contact Astro Support

If issue persist, please submit the issue on our Feedback Form and attach a picture of your General tab of the STB Diagnostics for assistance or chat with us via WhatsApp at 03-9543 3838.

Centralised Dish

If your Astro Box is connected to your apartment or condo building's centralised dish and the issue persists, please contact your respective Building Management before reaching out to our agents.

SecureGo is an authentication process that allows you to approve your My Astro transactions safely and easily using one-tap verification. This feature is available on the My Astro app. 

Once SecureGo is activated, it will be your default transaction approval method on the My Astro app. 

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Settings.

STEP 3

Navigate to Network Settings and press "OK".

STEP 4

Select Network Diagnostics and press "OK".

STEP 5

Details information of Network Diagnostics screen will be displayed.

Refund can only be made by the registered Astro account holders.

However, if you would like to request refunds on behalf of the account holder, you may do so by providing the supporting documents (e.g.: authorization letter, death certificate, 3rd party NRIC copy).

To check your contract, please visit My Astro.

Astro will send updates on your ticket status via WhatsApp. If you don’t receive any updates, you can call us at 03‑9543 3838 and we’ll help you track your ticket.

Follow the steps below to access the TVBAnywhere+ app on your Ultra/Ulti box:

• Step 1: On the Home menu, go to the app rail and select TVBAnywhere+. A screen with Pair TVBAnywhere+ TV App and a QR code will appear.
• Step 2: Scan the QR code with your mobile device. This action will open the TVBAnywhere+ login page on your phone.
• Step 3: Click on the Astro logo from the partner picker list and login with your Astro ID.
• Step 4: The TVBAnywhere+ app will now launch. Select the ‘Me’ icon to open your profile.
• Step 5: Choose Pair with TV App on the profile page.
• Step 6: A pairing code will appear on your TV. Enter this code on your mobile device and click OK. The TV screen will refresh, and the TVBAnywhere+ homepage will appear.

If you are interested to upgrade your box, you can do so via Astro's retailers or online as follows:

I. Visit https://hub.astro.com.my/#5

II. Select `Box Upgrade` and log in with your Astro ID

III. Select the box you would like to upgrade

Yes, you will. Customers who purchased Astro First / Astro Best / Pay-per-View event in February 2024 with a viewing period in March 2024 will be charged an 8% Service Tax in their next bill.

Watch this video or follow below steps to fix broadband no service - Astro Fibre

You need to identify your modem type by looking at the modem light indicator before proceeding with troubleshooting.

The type of modem is indicated as per below:

MODEM INDICATOR 1

MODEM INDICATOR 2




MODEM INDICATOR 3



BTS 1

1. Please power off your modem and router. (This is to refresh your modem and router performance)
2. Make sure the fibre cable from your wall socket to modem is securely connected.

3. Please ensure the LAN cable is securely connected from router to your devices (Astro Box/Laptop etc.)

Modem connection



Router connection



4. Now, power on modem and router, wait for 2 minutes to stabilise the devices after reboot. Your internet services should be restored.

5. If issue persists, please connect to our agent and attach your modem light indicator picture for further assistance.



BTS 2

1. Please power off your modem and router.
(This is to refresh your modem and router performance)

2. Make sure the fibre cable from your wall socket to modem is securely connected.

3. Please ensure both LAN cables on the Modem (LAN Port 2) and Router (Port 1) are properly connected.


Modem connection



Router connection


4. Power on your modem and router, wait for 2 minutes to stabilise the devices after reboot. Your internet services should be restored.

5. If issue persists, please connect to our agent and attach your modem light indicator picture for further assistance.



BTS 3

1. Please ensure your modem and router power plugs are securely connected to the power socket.

2. Alternatively, try to connect the power plug to a different power socket or power source. This step is to eliminate the possibility of faulty power socket which could cause the issue.

3. If issue persists, please connect to our agent for further assistance.

The iQIYI app offers subtitles in multiple languages for all their content excluding some variety shows. However, no dubbing option is available yet. You will be able to select or switch off your subtitles when you play your video in full screen.

Multiroom discount rates will be removed upon splitting the account.

While there is no limit on device registrations, concurrent viewing limits depend on the HBO Max subscription plan: the HBO Pack with HBO Max Premium plan allows streaming on up to 4 devices simultaneously, whereas the HBO Pack with HBO Max Standard plan permits streaming on up to 2 devices at the same time.

You may register for auto-debit via:

1. My Astro website.

2. My Astro App

3.Any of our Astro Experience Store.

Please ensure that you have entered the correct email address or mobile number associated with your Disney+ account.

If you still do not receive the OTP, please WhatsApp or call Astro’s Customer Service at +603 9543 3838.

Sun NXT is an app that offers content in six different languages: Tamil, Telugu, Malayalam, Kannada, Bengali, and Marathi. The app carries a large collection of movies, including Tamil classics and latest releases. Sun NXT also offers a variety of content ranging from TV shows, live TV shows, news, music videos, kids' shows, comedy clips, to trailers.

Starting 29th April 2025 onwards, Sun NXT will be available on Astro via two tiers:

• Sun NXT Lite: Complimentary for Indian Favourites/Maharaja Pack customers only, with content similar to 6 Sun channels (SUN TV HD, SUN MUSIC HD, SUN LIFE, SUN NEWS, ADITHYA & KTV,) and Video On Demand (VOD) content (TV shows), with more than 2000 hours of content.
• Sun NXT Premium: Available to all Astro customers for only RM 25.00/month (RRP RM30.80) with an expanded access to the full Sun NXT library.

The Astro X3 packs are available to both new and existing Astro customers, making it easier for customers to enjoy a fully digital viewing experience. For existing Astro customers, subscribing to an Astro X3 pack under a 12-month contract will be treated as a new subscription, and a separate account will be created.

To manage this subscription, customers will need to register a new Astro ID using a new email address. This ensures a smooth and seamless self-service experience, with each subscription managed independently.

STEP 1

Press "HOME" button on your remote control.

STEP 2

Navigate to Preferences and press "OK".

STEP 3

Navigate to Auto Standby and press "OK".

STEP 4

Navigate to your preferred selection and press “OK”.

STEP 5

Select Yes, continue and then press "OK" to confirm on the changes.

Otherwise, select No, go back to cancel.

1. Open/Download the My Astro app or visit My Astro web.

2. Login with your Astro ID.

3. Go to Account.

4. Select 'Profile'.

5. Under Mobile number, tap on the edit icon.

6. Select your verification method. The OTP will be sent to your registered mobile number or email address.

7. Enter the 6-digit One Time Pin and tap 'Verify'.

8. Enter the new mobile number and tap 'Next'.

9. Enter the One Time Pin sent to the new number and tap 'Verify'.

10. A successful notification will be displayed.

If you accidentally delete your mesh:

1. Login to the Astro Fibre App.
2. Go to Network > click on the plus (+) sign.
3. Enter your serial number (starts with SRXxxxxx).
4. Click OK to add the mesh back.

No, you will not be charged 8% Service Tax for reconnection performed before 1st March 2024. Only reconnections executed on or after 1st March 2024 are subject to the 8% Service Tax.

STEP 1

Press "HOME" button on your remote control.

STEP 2

Navigate to Settings and press "OK".

STEP 3

Navigate to Display and press "OK".

STEP 4

Navigate to Resolution and press "OK".

STEP 5

Navigate to your preferred selection and press “OK”.

STEP 6

Select Yes, continue and press "OK" to confirm on the changes.

Otherwise, select No, go back to cancel.

No, you are not allowed to change your due date or maintain your old due date. Your current due date is as per Astro Policy. Therefore, to ensure that you continue to enjoy uninterrupted services, we advise you to observe this change in due date from Day 30 to Day 25 and proceed with the necessary payment.