You will be required to verify your account once when you register your Astro ID or when you reset your password. This can be done either on the My Astro website or the My Astro app. The steps are simple:

• Step 1: Log in using your email address or mobile number and password

• Step 2: Enter the verification code sent to your registered email or mobile number

• Step 3: Re-enter your password to confirm your Astro ID

• Step 4: Verification is complete! You can now log in to your Astro account and access apps like Astro GO and My Astro

Not to worry, our representative will be contacting you within 24 hours.

This error indicates that you are streaming on Astro GO while being connected to Static or Fixed IP. Alternatively, you can try accessing Astro GO via Hotpot.

If you still facing the same issue, proceed to submit report via WhatsApp or Feedback Form.

You may enquire by submitting a Feedback Form. Please choose the following feedback type and issue:

Feedback type : Payment/Billing
Issue : I want to ask about a refund

OR

Reach out via Astro Official Digital platform i.e. Facebook or Chat. Our agent will assist on your request.

STEP 1
Switch off the power for your box and make sure that the adapter's power light is off.

STEP 2
Locate the Smartcard at the front or right side and gently pull it out make sure that the adapter's power light is off.

STEP 3
Wipe the Smartcard's gold chip clean using a dry soft cloth.

STEP 4
Make sure the gold chip is facing upwards and reinsert it all the way in.

STEP 5
Switch on the power for your box and make sure that the adapter's power light is on. Please wait for 5 minutes.

STEP 6
Turn on your box. You should no longer be experiencing this problem.
If issue persist, please submit the issue in our Feedback Form and attach a picture of your General tab of the STB Diagnostics for assistance.

Please ensure that you have subscribed to the mentioned channel.
If you're subscribed to this channel, follow below steps.

STEP 1
You need to refresh the signal on your box.
Refer to Refresh signal of your box guide.

STEP 2
If issue persist after 30 minutes, proceed to submit report via WhatsApp or Feedback Form.

STEP 1

Press "HOME" button on your remote control.

STEP 2

Navigate to Settings and press "OK".

STEP 3

Navigate to STB Diagnostics and press "OK".

STEP 4

From General Tab, take a look at the Current Entry Point Name for the LNB type of your input source.

The iQIYI app offers subtitles in multiple languages for all their content excluding some variety shows. However, no dubbing option is available yet. You will be able to select or switch off your subtitles when you play your video in full screen.

Huawei K562e

1. Please connect your computer or laptop to your Astro Fibre router using LAN cable. Your LAN cable must be connected from the yellow port of Astro Fibre router (Any available port).

2. Once connected, open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox and etc.

3. On the address bar, type http://192.168.100.254 and below page will appear.

Login using your username and password if you have changed the router login setting. Otherwise, your default router login is as per below.

Username: user

Password: user

4. Once you have successfully logged in, the router's web-based setup page will appear.

5. At the top of the page, click More to configure the WiFi parameters.

6. From the left menu, select WLAN and choose Wi-FI Advanced Network to access the screen below.

7. To change the channel on 2.4 GHz and 5 GHz, click the drop-down arrow for Channel, then select your desired channel.

8. Then, click "Apply" for the changes to take place.

The Ultra Box or Ulti Box and the SIM Card are property of Astro, as per our General Terms and Conditions for Astro Services. Therefore, customers are accountable for returning the boxes upon the termination of their Astro subscription. Otherwise, an RM100 (exclusive of Sales and Service Tax) box fee will be charged to the customer's account.

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Settings.

STEP 3

Navigate to Video Resolution and press “OK”.

STEP 4

Navigate to your preferred selection and press “OK”.

Recommended to select Auto.

STEP 5

Navigate to Save and press "OK" to confirm your selection if able to read the text properly.

Otherwise, navigate to Cancel to revert to previous settings.

Your bill statement will include details of your monthly subscription charges; e.g. charges for your chosen Astro packages and Broadband service. It will also show the time period of which your first bill will cover, as well as indicate how much the total charges are and when the payment due date is.

Only Astro customers with the Sports subscription as part of their Astro TV Pack (Bundle or add-on) will be able to enjoy the beIN SPORTS CONNECT app on their Ultra/Ulti Box.

Our customers deserve the best streaming entertainment experience with us and from 9 December 2024, the new Astro One Packs make that possible.

From just RM49.99, these new packs make it simple, flexible and accessible for all Malaysians to stream the content they love on one platform, with up-to 4 concurrencies on Astro GO. Customers can easily make changes to their subscriptions via the My Astro app, including updates to their packs, choosing from up to 11 streaming apps, or switching to different ones, as and when they like.

Customers can choose between:

• The Astro One: Entertainment Pack for a wide range of favourite vernacular entertainment, including the best of Malay, Chinese, Indian, Korean, Horror, Local Live Sports (Liga Malaysia) and international shows enjoyed by Malaysian families.

• A sports-filled fiesta with Astro One: Sports Pack that comes with all our Sports channels, on top of what is on the Entertainment Pack.

• And the Astro One: Epic Pack, an indulgence for those who want it all. Adding on to the Entertainment Pack and Sports Pack, this unrivalled streaming experience will include the best from their favourite streaming apps, all on a single platform.

For more information, visit www.astro.com.my or send us a message on WhatsApp at 03-9543 3838.

1. Open/Download the My Astro app or visit My Astro web.

2. Login with your Astro ID.

3. Go to Manage Subscription.

4. Tap on Fibre plan.

5. Select your preferred speed and tap 'Proceed'.

6. Review order, select agreed and tap on 'Confirm order'.

7. Select 'Approve' to upgrade speed.

8. A confirmation order will be displayed.

STEP 1

Press "HOME" button on your remote control.

STEP 2

Navigate to Settings and press "OK".

STEP 3

Navigate to Display and press "OK".

STEP 4

Navigate to TV Settings and press "OK".

STEP 5

Navigate to Conversion for 4:3 Input Video, select your preferred selection and press “OK”.

STEP 6

Select Yes, continue and press "OK" to confirm on the changes.

Otherwise, select No, go back to cancel.

1. Open/Download the My Astro app or visit My Astro web.

2. Login with your Astro ID.

3. Go to Account.

4. Under Billing, tap on Auto Debit.

5. Select 'Update expiry date'.

6. Key-in the expiry dates, then tap 'Save'.

7. A successful notification will be displayed.

It will take around 10 to 15 minutes before you are able to view your purchase.

Yes, you can upgrade your Disney+ subscription plan. Upgrades take effect immediately and charges will be prorated accordingly on your bill.

You can upgrade your Disney+ subscription plan through the following methods:

a. Visit My Astro app or web

b. WhatsApp or call Astro’s Customer Service at +603 9543 3838

c. Visit your nearest Astro Store

Kindly refer to the steps below to upgrade your Disney+ subscription plan on My Astro app or web:

a. Log in to My Astro app or web

b. Go to Manage Subscription → Add-ons → Manage your add-ons

c. Select Disney+ Premium

d. Click Proceed

e. Review and confirm the order

Your account may be under suspension. To resolve this issue, proceed to submit report via WhatsApp or

Feedback Form

.

1. Please standby computer/laptop to access to the internet and connection must be via (cable) [Connect the LAN (cable) to the yellow port in Maxis Router and direct to computer/laptop].
2. You may open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox and etc.
3. On the address bar, please go to http://192.168.0.1 or www.tplinkwifi.net and below page will appear.

4. Once you have successfully login, the router's web-based setup page will appear. Please follow below steps for the configuration.

6. Since this is a dual band router, you will have 2 Wireless Network Names  (SSID) i.e. 2.4GHz and  5GHz. You may connect to any of the SSID, preferably with a stronger signal available.

7. You may change the Wireless Network Name (SSID) and the Password to follow your preferences, then click "Save"  for the changes to take place.

Please reconnect to the new wireless name with the new password once completed.

To enjoy full premium access, simply add RM10 to upgrade your Sun NXT Lite subscription to
Sun NXT Premium.

We have discontinued offering the PVR box to our customers. You may opt to take up our latest 4K UHD supported Ultra Box instead. For more information, visit https://product.astro.com.my/box.

Alternatively, you may reach out to us at 03-7481 8000 for further enquiries or to sign up for the Ultra Box.

Yes. Charges for your Disney+ subscription will begin once the subscription has been successfully added to your Astro account.

Starting

12 December 2023

, users must log in using their

registered email address

,

mobile number

, or a

social account

(Facebook, Google, or Apple) to access any of Astro's digital platforms, including

My Astro

,

Astro GO

, and

Astro's official website

.

STEP 1: Try Changing the Channel

Remote LED Indicator Guide:

LED blinks 3 times or doesn't blink at all:
Replace the remote batteries and try again

LED blinks once:
Remote is working fine. Proceed to the next step.

STEP 2: Test Manual Channel Change

Try changing the channel manually directly from the box front panel (If any).
If it's working, you might need to replace your Astro remote, this might be due to a faulty Astro remote.
You can visit the nearest Astro Service Center to replace your remote.

STEP 3: Refresh Box Settings

Manually reload the decoder settings using the front panel of the decoder.
Refer to Refresh Box setting Guide steps here.

If issue persist, please submit the issue on our Feedback Form with the error details and provide sim card number for assistance.

Please contact your issuing bank to enable card-not-present (CNP) transactions. This security measure helps us to protect your card information from being misused in fraudulent transactions.

1. Unifi netis brand

The following shows an Interface based on Unifi router

1. Launch Web Browser and enter the default's gateway's IP address (192.168.1.1) in the address bar.

1. Enter Username and Password.
   1. Username = tmadmin
   2. Password = Adm@xxxx (xxxx refers to last four digits of MAC address)

1. Choose WLAN -> wlan0 (2.4GHz) Basic Setting. Note down on SSID.

1. Choose WLAN -> wlan1 (5GHz). Compare SSID with previous SSID.

1. If SSID for wlan0 (2.4GHz) and wlan1 (5GHz) are the same. Change wlan1 (5GHz) SSID by adding number 5(i.e. ifuni_5G) to differentiate from 2.4 GHz. Click Apply Changes.

Note: Connection to Wi-Fi may be temporarily loss while the changes is updated.

The minimum recommended internet speed is 10 Mbps for HD videos and 30 Mbps for 4K UHD videos.

You will be able to watch almost immediately while the content streams through your Astro Box. Buffer time for the video to load will depend on the speed of your broadband.

If you are subscribed to Netflix via a bundle, Netflix comes by default as part of your entitlement.

If you are subscribed to Netflix as an a-la carte, the cancellation of Netflix can only be done via Netflix's Website, etc). This change will reflect in your next bill. From mid-December 2021 you may also cancel Netflix add-on through Astro Call Center.

Kindly note that not all Astro & Broadband Devices are required to be returned. After service termination of your Astro & Broadband service, we will call you via your registered mobile number within 3 days to schedule a pickup appointment with our Astro agent if your device needs to be returned.

If you were not contacted within 3 working days to return your devices, you are required to discard your old Astro & Broadband devices only at registered collection centres for proper handling and management of e-waste in an environmentally sound manner. Click here to find a registered collection centre near you.

Frequently Asked Questions

1) I missed the pickup appointment; what do I do now?

You can reschedule the pick-up appointment by calling our agent directly.

2) Can I reschedule my pickup date?

Yes! You can call our agent back directly to reschedule the pickup date and time.

3) Do I have to pack my device(s) before handing it over to the Astro agent?

Our Astro agent will dismantle the devices for you. However, if your devices are already dismantled, please pack them in their original box/packaging if possible. If this option is not available to you, just hand the device(s) over to the Astro agent without any packaging. You will not be charged any fees if the original packaging has been damaged/lost.

4) Do I have to print anything or fill in any forms before handing my device(s) over to the Astro agent?

No, you do not have to prepare any documents before handing your device(s) over to the Astro agent! All you have to do is get your device(s)ready before the Astro agent arrives to ensure a smooth handover process.

5) I have the Astro & Broadband router and modem to return, however, the cable(s) that come with them are damaged/lost; will there be any penalty fees?

No, please return your old Astro & Broadband modem and its power supply unit (PSU). There will be no penalty fees if the cable is damaged or lost.

Recycle via Registered Collection Centres

For all recycling-related questions, please click here.

Yes, you may submit for the termination of account, but it is subjected to an Early Termination Fee (ETF) based on the remaining contract.

No, your subscription will be terminated at the end of your Astro billing date. Until then, you will still be able to access ZEE5 premium.

Once you have submitted your e-invoice request, it will be processed and you can receive the application results through My Astro website or app. Some applications may take longer to process due to unforeseen circumstances. We strongly advise you to provide your TIN number to facilitate the e-invoice issuance process.

STEP 1 On your remote, press the Home button and the Home Page will be displayed on your screen.

STEP 4 Navigate to Edit Profile.

STEP 5 Choose a profile to edit.

STEP 6 Choose a new Profile Picture and press “OK”.

Wider WiFi coverage:

- All areas across the house will enjoy optimal coverage with multiple Mesh WiFi units located in areas with sub-optimal coverage to form a larger WiFi network.

Stable connection;

- Consistent coverage of optimal WiFi signal will ensure a stable connection as the Mesh unit will automatically connect your devices to the strongest WiFi signal around your house.

To check your contract, please visit My Astro.

Watch this video or follow below steps to perform installation setup - Plug and Play Mode - Ultra Box / Ulti Box

STEP 1
Please wait while your Astro box initializes.

STEP 2
Select your preferred language.

STEP 3
Navigate to Next and press "OK".

STEP 4
Select Auto as the Video Resolution.

STEP 5
Navigate to Next and press "OK".

STEP 6
Navigate to Confirm and press "OK" to confirm your selection if you are able to read the texts on screen properly.
Otherwise, navigate to Cancel to revert to the previous settings.

STEP 7
Select IPTV Plug & Play (self-install) as the box operating mode.

STEP 8
Navigate to Next and press "OK".

STEP 9
Select your preferred connection.
For connection via Wi-Fi, proceed to STEP 10.
For connection via LAN Cable, proceed to STEP 16 once you are connected.

STEP 10
Please wait while your Astro box searches for available Wi-Fi networks.

STEP 11
Navigate to your preferred Wi-Fi network and press "OK".

STEP 12
Please enter the password to connect to the Wi-Fi network.

STEP 13
Navigate to Done to continue.

STEP 14
Please wait while your Astro box connects to the internet.

STEP 15
Navigate to Yes to allow your Astro box to connect to this network automatically.
Otherwise, navigate to No.
Proceed to STEP 16 for the next step.

STEP 16
Your box's connection status will be displayed.
Navigate to Finish to complete the setup.

Yes. To change the language, go to the app’s side menu, then go to Settings and select the preferred interface language.

You can opt in to e‑Invoicing via the My Astro website or the My Astro app by following the steps below. Depending on your profile, you may be asked to provide additional details. Please scroll down to review the information required before proceeding.

Via the My Astro website:

1. Log in using your Astro ID.
2. Click Bills, scroll down to e-Invoice, and toggle it on.
3. You may need to enter your information (scroll down for more info) and click Acknowledgement to confirm.

Via the My Astro app:

1. Log in using your Astro ID.
2. Tap your account number or the default profile icon at the top left.
3. Scroll down to the Billing section, select e-Invoice, and turn the toggle on.
4. You may need to enter your information (scroll down for more info) and click Acknowledgement to confirm.

Details you may be required to provide:

The information required depends on your customer profile.

Note: You may obtain your TIN from the MyTax Portal or visitthe nearest IRBM branch

For Platinum Pack and Multiroom Smart TV customers, Astro GO+ is included in your subscription at no extra charge. For customers on other packages, you will be able to add-on Astro GO+ to your subscription for RM 5.99/month.

If you require any assistance with the app, you may:

1. Visit the WeTV official Facebook Page for more information: WeTV Malaysia - Home | Facebook; or

2. Drop the WeTV team a message via Facebook chat here

If you encounter any issues with your Astro billing and entitlement, you may contact our Customer Service by:

1. Submitting a feedback form here: www.astro.com.my/contactus/form; or

2. Reaching to us via WhatsApp by typing "Hi"at 03-9543 3838

All existing or new Astro customers who meet the following criteria may upgrade to the Ultra Box:

1. Have an internet connection at home (recommended>10Mbps speed)
2. Maintain a minimum subscription with a HD + Recording service

If you live in a high-rise building, please call us at 03- 7481 8000 to check if your building can support the Ultra Box. If your high-rise building allows for the set-up of individual dishes you will be able to upgrade to the Ultra Box, subject to the criteria above.

If you would like to access our 4K UHD content via the Astro UHD channel 805 and UHD content on VOD, Astro Best and Astro First. We also recommend:

1. 4K UHD supported TV that is HDCP2.2 compliant
2. Internet connection of at least 30Mbps

Note: If you do not have an internet connection at home, you may take up the Ultra Box bundled with Astro™'s broadband package with rebates of up to RM30/month. For more details and to sign up for Astro & Broadband, please click here.

Intermittent internet connection using LAN cable

Looks like there is something wrong with your service connection.

Please run a Ping Test, Traceroute Test and attach the picture or screenshot of both test results in the Feedback Form below, in order for us to provide further assistances.

Please ensure to attach the required screenshot(s) in ONE file (i.e. Microsoft Word document, PDF, Image file) before submitting the form.

Intermittent internet connection using Wi-Fi

1. Router Positioning
   Most people underestimate the importance of picking a good spot for a Wi-Fi router. Even a small shift in positioning could end up being the difference between day and night.
   
   i) High vs. Low
   Put the router as high up as possible to extend the broadcasting range of the radio waves. This also helps clear the router of possible interferences.
   
   ii) Concrete & Metals
   Make sure your router isn't blocked by any other objects, especially devices that are electronic. Also, avoid placing your router in your basement as this area is usually enclosed by a lot of concrete, which can be almost impossible for Wi-Fi signals to penetrate.
   
   iii) Distance to Router
   The further away from your router you get, the weaker the Wi-Fi signal. Therefore, the best option is to place your router as close to your devices as possible, but this is only practical if you have one main area where you tend to use your devices.
   
   Otherwise, you should place your router near the center of your home. After all, Wi-Fi broadcasts in 360 degrees, so it doesn't make sense to put it at one end of the house.
   
   
2. Wireless Interference & Noise
   You've probably never noticed but there are wireless signals all around you wherever you go and they're passing through you all the time. From where? Electronic devices, Wi-Fi routers, satellites, cell towers, and more.
   
   Although Wi-Fi is supposed to be on a different frequency than most of these devices, the amount of radio noise can still cause interference. Some common causes of interference include:
   i) Microwaves
   ii) Bluetooth Devices
   iii) Cordless Phone
   
3. Surrounding Wi-Fi signals
   A truth of the modern world is that every household has their own Wi-Fi network, which can cause issues with channel overlap. This can be somewhat problematic in a townhouse, but is especially problematic in housing complexes and apartments where there can be many routers within close proximity. Which is why it's important that you pick a good channel in your router settings. Modern routers can choose channels for you automatically, but sometimes it's better to investigate and find the best channel yourself.
4. Usage
   More likely, however, is that the people on your network such as friends, roommates, or family members are participating in bandwidth-heavy activities like gaming and streaming Ultrabox/Netflix.
   Fortunately, if this is the case, you can prioritize your own network traffic by enabling Quality of Service in your router settings.

If the problem persists, please run a Ping Test, Traceroute Test and attach the picture or screenshot of both test results in the Feedback Form below, in order for us to provide further assistances.

Please make sure to attach the required screenshot(s) in ONE file (i.e. Microsoft Word document, PDF, Image file) before submitting the form.

Quick Info
A Ping Test shows how long it takes for packets to reach host.
A Traceroute Test traces the route of packets to destination host from our server.

Yes, you can. On your Account page and go to Profile. Click edit on Service address to change your address details. You may also request for installation assistance if it's required for the new address.

Download My Astro app or visit the My Astro website.

Astro X3 is a new way to become an Astro customer, designed for the big screen. It allows customers to sign up instantly and start streaming Astro directly on their Smart TV—without the need for a set-top box, satellite dish or installation.

Astro GO, on the other hand, is a companion app that comes with every Astro subscription. It extends the experience to smaller screens, enabling customers to watch their content on smartphones, tablets and PCs anytime, anywhere.

STEP 1

Press "HOME" button on your remote control.

STEP 2

Navigate to Update Satellite Frequency and press “OK”.

STEP 3

Choose Reprogramming and press “OK”.

STEP 4

Select Yes, continue and press "OK" to proceed with the update.

Otherwise, select No, go back to cancel.

STEP 5

Satellite Frequency Update progress screen will be displayed.

STEP 6

The test result will be displayed once completed.

Press "OK" to go back to channel.

Watch this video or follow below steps to fix your WiFi connectivity issue

Skyworth RG21

1. Please connect your computer or laptop to your Astro Fibre router using WiFi or LAN cable. Your LAN cable must be connected from the yellow port of Astro Fibre router (Any available port).
2. Once connected, open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox and etc.
3. On the address bar, type http://192.168.100.254 and below page will appear.

Login using your username and password if you have changed the router login setting. Otherwise, your default router login is as per below.

Username: user
Password: user

4. Once you have successfully logged in, the router's web-based setup page will appear.

5. At the top of the page, click WLAN to configure the WiFi parameters.

6. To change the channel on 2.4G, click the drop-down arrow for Channel, then select your desired channel.

7. Then, click "Save & Apply" for the changes to take place.

8. You may make the same changes for 5G by click the drop-down arrow for Channel, then select your desired channel.

9. Then, click "Save & Apply" for the changes to take place.