1. Please standby computer/laptop to access to the internet and connection must be via LAN (cable) [Connect the LAN (cable) to the yellow port in Maxis Router and direct to computer/laptop].

2. You may open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox and etc.

3. On the address bar, please go to http://192.168.1.254 and below page will appear.

If below box appear, please enter required details:

USERNAME: Administrator

PASSWORD: (ACCESS KEY AT THE RGW STICKER)

(These are the defaults, if you have done previous configuration on your router the password may be different)

4. Once enter into the page "'TECHNICOLOR TG784N V3'', you may follow below steps to get the best wireless channel information.

A. Select "Home Network".

B. Click "WLAN: SSID" to proceed to next screen.

C. In order to get the best wireless channel, click "Wireless Scan" to scan available surroundings wireless Channel.

D. Please choose channel with lesser number of usage.

Example in below case, you may choose channel 4.

5. To configure wireless channel, please proceed with below steps.

A. Select "Home Network".

B. Click "WLAN: SSID" to proceed to next screen.

C. Then, click "Configure" to change the channel selection (automatic to manual) and other configuration option.

D. Please ensure below items:

i. WLAN Enable: Tick

ii. Interface Enable: Tick

iii. Change the Channel Selection to Manual

iv. Change the wireless Channel based on Step 4(D).

v. Once completed the selection, click the "Apply" button.

STEP 1

Switch off the power for your box and make sure that the adapter's power light is off.

STEP 2

Locate the SIM card at the left side and gently pull it out.

STEP 3

Wipe the SIM card's gold chip clean using a dry soft cloth.

STEP 4

Make sure the gold chip is facing down and reinsert it all the way in.

STEP 5

Switch on the power for your box and make sure that the adapter's power light is on.

Please wait for 5 minutes.

STEP 6

Turn on your box. You should no longer be experiencing this problem.

If issue persist, please submit the issue on our Feedback Form with the error details and provide sim card number for assistance.

Auto-debit payment will be debited from your account 5-7 working days after your billing cycle date.
If your auto-debit payment is unsuccessful, you will receive an SMS alert.

Please ensure that you have subscribed to the mentioned channel.
If you're subscribed to this channel, follow below steps.

STEP 1
You need to refresh the signal on your box.
Refer to Refresh signal of your box guide.

STEP 2
If issue persist after 30 minutes, proceed to submit report via WhatsApp or Feedback Form.

When you have reached the duration (years) needed for the upgrade, we will upgrade you into your new tier and your shiny new rewards will appear in the My Astro app. You are still eligible for all the rewards from previous tiers too.

By adding a Netflix account to your Astro bill, your Netflix account is already activated. No additional steps for activation are required.

Watch this video or follow below steps to perform installation setup - Plug and Play Mode - Ultra Box / Ulti Box

STEP 1
Please wait while your Astro box initializes.

STEP 2
Select your preferred language.

STEP 3
Navigate to Next and press "OK".

STEP 4
Select Auto as the Video Resolution.

STEP 5
Navigate to Next and press "OK".

STEP 6
Navigate to Confirm and press "OK" to confirm your selection if you are able to read the texts on screen properly.
Otherwise, navigate to Cancel to revert to the previous settings.

STEP 7
Select IPTV Plug & Play (self-install) as the box operating mode.

STEP 8
Navigate to Next and press "OK".

STEP 9
Select your preferred connection.
For connection via Wi-Fi, proceed to STEP 10.
For connection via LAN Cable, proceed to STEP 16 once you are connected.

STEP 10
Please wait while your Astro box searches for available Wi-Fi networks.

STEP 11
Navigate to your preferred Wi-Fi network and press "OK".

STEP 12
Please enter the password to connect to the Wi-Fi network.

STEP 13
Navigate to Done to continue.

STEP 14
Please wait while your Astro box connects to the internet.

STEP 15
Navigate to Yes to allow your Astro box to connect to this network automatically.
Otherwise, navigate to No.
Proceed to STEP 16 for the next step.

STEP 16
Your box's connection status will be displayed.
Navigate to Finish to complete the setup.

No, the Service Tax is a tax payable entirely to the Government. Astro acts as a collection agent for the Government.

Of course not! It is a value-added service introduced for your convenience.

STEP 1
Switch off the power for your box and make sure that the adapter's power light is off.

STEP 2
Locate the Smartcard at the front or right side and gently pull it out make sure that the adapter's power light is off.

STEP 3
Wipe the Smartcard's gold chip clean using a dry soft cloth.

STEP 4
Make sure the gold chip is facing upwards and reinsert it all the way in.

STEP 5
Switch on the power for your box and make sure that the adapter's power light is on. Please wait for 5 minutes.

STEP 6
Turn on your box. You should no longer be experiencing this problem.
If issue persist, please submit the issue in our Feedback Form and attach a picture of your General tab of the STB Diagnostics for assistance.

For more information you may visit

https://www.hasil.gov.my/en/e-invoice/

OR call the IRBM help desk line at 03-8682 8000 OR email them at [email protected]

[email protected]

.

For customers with the Ultra or Ulti Box, please ensure to provide your latest contact details to our Astro agent during the call to terminate your account, this includes your mobile number and house address. If you still need further help, please contact us at 03-9543 3838.

Yes, you will need to activate SecureGo again.

Yes, the 6% Service Tax will be imposed for Astro Smartcard/SIM card replacement effective bill date 9

th

July 2024 onwards.

Astro sends regular payment reminders to customers via SMS until their current charges have been paid. However, we encourage customers to pay their bill as soon as possible to avoid disconnection of Astro service. Please reach out to us here if you require more information about payment reminders or to change your contact details.

Yes, anyone can create an Astro ID. However, only the Astro account owner can link it to their Astro ID. If you are not the account owner, you will need their permission to complete the linking process.

If you cancel your subscription before completing the 12-month contract period, an early termination fee may apply in accordance with your contract terms. The fee is calculated by multiplying your monthly subscription fee by the number of months remaining in your contract.

Your Astro account number is a 10-digit combination e.g.08XXXXXXXX.

To check your account number, you can do it through My Astro. Here's how:

1. Download the My Astro app or visit My Astro web
2. Login using your Astro ID
3. Go to Account
4. You will be able to see your account number tied to your subscription

Alternatively, you can find your account number on your paper bill or e-bill. You can refer to the top right corner of the bill.

🔄 Want to manage your Astro subscription easily?

📱 Download the My Astro app to:
- Manage your pack subscriptions
- Get add-ons in just minutes
- Get details about your contract

You may cancel your ZEE5 Premium subscription here. Kindly note that we will not be able to offer a refund if you do decide to leave the ZEE5 app before your subscription period ends.

You may refer to our TV Guide for the latest schedule.

No. If you are a non-Astro subscriber, you will still be able to create an Astro ID, but access and use of Astro's digital services will be limited. If you are an Astro subscriber, please link your Astro ID to your Astro account number to enjoy exclusive access to all of Astro's digital services.

If the bill has been paid, there will not be any additional service tax charge. However, if the bill has been issued by Astro but has not been paid, then the 8% Service Tax will be reflected in the next bill with adjustments on the new tax rate for services rendered from 1st March onwards.

Example:
Bills issued on 15th February will be charged the 6% SST. Customers will see proration for 8% from 1st – 14th March in the next bill issued on 15th March 2024. If you have fully paid your February bill before 1st March, the Service Tax will remains at 6%. You will be able to see the adjustment reflected in your next bill.

STEP 1

Press any button on your Astro remote.

INDICATOR: LED blinking 3 times / NO LED blink

SOLUTION: Replace new battery

STEP 2

Check if you can change channel using your Astro remote control.

If issue remain after the battery replacement, try changing the channel manually directly from box front panel (If any).

If it's working, you might need to replace your Astro remote.

This might be due to a faulty Astro remote.

You may purchase it directly from Astro Exclusive Partners.

If confirm no issue with remote control, please refer to Decoder Hang at Channel troubleshooting steps here.

Astro's Plug & Play Box is our latest box where users can enjoy the latest Astro box simply by connecting it to the TV and internet. There is no longer a need to schedule or pay for an installation. By connecting your Plug & Play Box to home broadband, you will be able to-do the following:

• Watch your channels over the Internet. No more rain fade!
• Never miss your favorite shows again as you can stream LIVE events from the beginning, or simply pause and resume the program as you wish.
• Access a library of over 110,000 videos on demand. Catch-up or binge-watch full episodes whenever you like.
• Access your recordings anytime on TV or the Astro GO app via Cloud Recording.

Other features include pause on TV and continue watching on the Astro GO app, enhanced search capabilities and more.

Multiroom (Astro Box) requires an Astro box to be set up and can be accessed through the regular satellite feed or streaming on home Wi-Fi. Meanwhile, the Multiroom (Smart TV) only requires a Smart TV and no installation is needed. Customers can download the Astro Smart TV app on the Smart TV to stream.

The number of concurrent streams depends on your Disney+ subscription plan:

a. Disney+ Standard: Up to 2 concurrent streams

b. Disney+ Premium: Up to 4 concurrent streams

STEP 1
Switch off the power of your box and make sure that the adapter’s power light is off.

STEP 2
Unplug the HDMI cable from your TV and plug it back in securely to other available HDMI port.

STEP 3
Switch on the power for your box and make sure that the adapter’s power light is on.
Please wait for 5 minutes.

STEP 4
Turn on your box. Do select the correct TV input.

------

If you're seeing a persistent blank screen after changing the display resolution on your Ultra/Ulti Box (for example, to 2160p), your TV may not support the selected resolution.

STEP 1

Switch off the power for your box and make sure that the adapter's power light is off.

STEP 2

Switch on the power for your box and make sure that the adapter's power light is on.

STEP 3

Press the standby button repeatedly after switch on the power.

The Startup Options screen will appear on your TV.

STEP 4

Press "987" to access the Advanced Startup Options menu.

Then, press "1" to initiate a reset setting.

STEP 5

Press "OK" to confirm restore to factory setting.

STEP 6

After the factory setting is restored, TV will turn blank.

Please wait until the box completes initiate setup.

STEP 7

Press "1" to initiate Linux download on the software.

STEP 8

Once completed, the following screen will appear on your TV.

Refer to Installation Setup guide here to complete the setup.

Kindly refer to the steps below to log in:

STEP 1

Click on the Disney+ app logo under the Apps rail on your Home page

STEP 2

Select Log In

STEP 3

Scan the QR code or visit the website on screen to log in

STEP 4

Key in the on-screen code to pair your TV

STEP 5

Enter your email address or mobile number associated with your Disney+ subscription

STEP 6

Select whether you want your OTP to be sent to your email address or mobile number

STEP 7

Key in your OTP

STEP 8

Review and agree to the Disney+ terms

Only applicable to first time log in to Disney+ after the app migration

STEP 9

Create your user profiles

Only applicable to first time log in to Disney+ after the app migration

STEP 10

Select your user profile on your TV screen to start watching

The 2 months of access will expire exactly two months after your account is activated. For example:

• If you activate on 24 April 2025, your access will expire on 23 June 2025.
• If you activate on 10 May 2025, your access will expire on 9 July 2025.
• If you activate on 23 June 2025, your access will expire on 22 August 2025.

Yes, you may change the interface language of the app. To access the language settings, please click "Profile" > "Settings" > "Language" and select your preferred language

Effective from the bill date 9th July 2024 onwards, the Service Tax for the Broadband Bundle/Fibre Bundle will be streamlined at a rate of 6%. The prorated adjustment for your Pay TV subscription will be calculated based on 6% service tax rate on your next bill, following your current subscription's tax rate.

You will be able to enjoy your Viu Premium membership immediately upon purchase/choosing it
under your Asian Favourites bundle option. For further clarification, feel free to reach out to us
via WhatsApp by typing “Hi” at 03-9543 3838.

STEP 1

Switch off the power for your box and make sure that the adapter's power light is off.

STEP 2

Locate the SIM card at the left side and gently pull it out.

STEP 3

Wipe the SIM card's gold chip clean using a dry soft cloth.

STEP 4

Make sure the gold chip is facing down and reinsert it all the way in.

STEP 5

Switch on the power for your box and make sure that the adapter's power light is on.

Please wait for 5 minutes.

STEP 6

Turn on your Ultra Box. You should no longer be experiencing this problem.

If issue persist, please submit the issue on our Feedback Form with the error details and provide sim card number for assistance.

Currently, you can only select one Netflix subscription at a time. Your available options include the Basic 24 Months, Standard 24 Months, or Premium 24 Months plans.

Yes, the iQIYI app is accessible globally. However, the content of the app might differ depending on the country which will be tailored based on local content rights and market preferences.

Yes, you can change your subtitle and dubbing for your contents, however, the dubbing may differ from content to content.

No, your subscription will be terminated at the end of your Astro billing date. Until then, you will still be able to access your WeTV VIP account.

If you are facing this error message on your PVR box when trying to perform actions like record, pause live TV or view recordings, follow below steps.

Note: PVR functionality is only available for Astro customers and is not supported for NJOI customers.

Check your hard disk connectivity.

STEP 1

On your remote, press the “HOME” button and the home menu will be displayed at the bottom of your screen.

STEP 2

Navigate to SETTINGS and press “OK”.

STEP 3

Navigate to STB DIAGNOSTICS and press “OK”.

STEP 4

From the General tab, take a look at the HDD Status.

If status is "Connected", press red button to reboot you decoder.

Wait until the box is on, then try to record any program.

If issue persist, please submit the issue on our Feedback Form and attach a picture of your General tab of the STB Diagnostics for assistance.

If status is "Disconnected", it is likely that the hard disk inside your PVR box is faulty.
Please note that the PVR Box has been discontinued, and you will receive an Ulti or Ultra Box for your replacement.
Submit your Feedback Form and attach a picture of your General tab of the STB Diagnostics for assistance.

STEP 1

Switch OFF the power of your Ultra / Ulti box and make sure that the adapter's power light is off.

STEP 2

Switch ON the power of your Ultra / Ulti box and make sure that the adapter's power light is on.

STEP 3

On your remote control, press the Home or Standby button repeatedly until the Startup Options appear on TV.

STEP 4
Press "987" to proceed.
Advanced Startup Options will be displayed.

STEP 5
Press "1" to initiate a reset setting.

STEP 6
Press "OK" to continue.

STEP 7
After the factory setting is restored, TV will turn blank.
Please wait until the box completes initiate setup.

STEP 8
Once completed, the following screen will appear on your TV.
Refer to Installation Setup guide to complete the setup.

Click here to follow New Installation Settings guide for Satellite
Click here to follow New Installation Settings guide for Plug and Play

Mesh WiFi technology greatly improves the WiFi network coverage within your home and virtually eliminates all WiFi “dead spots”. However, like all technologies there are limitations that you should be aware of.

The pairing of Mesh unit to the WiFi router is automatically handled between the WiFi router and the Mesh unit after it calculates its current position in relation to the WiFi router and surrounding Mesh unit (if available) already connected to the WiFi router.

If you are self-installing the mesh at your house, it is advisable for you to always pair the Mesh unit(s) with the WiFi router only regardless of how many Mesh unit available at your house.

Please note that if you have a Mesh connected to another Mesh, the expected performance of the WiFi speed will not perform as optimally as when compared to a Mesh connected directly to the WiFi router. Adding more points (also referred as Number of hops) in between your device to the WiFi router which will cause a reduction in bandwidth and add latency.

Service Tax will not be imposed on any CSR projects accounts. Any tax payable will be borne by Astro.

Yes, to enable subtitles or dubbing in your desired language, click on the subtitles/dubbing selection option at the bottom right corner of the video player, then click on the language you desire.

STEP 1

Choose your language preferences for both Menu Language and Info Language. Then, press "OK".

STEP 2

Select you box operating mode and press "OK".

STEP 3

Select the resolution supports by your TV and press "OK".

STEP 4

Press "OK" to proceed to the next screen.

STEP 5

Please select the LNB type and press "OK".

STEP 6

Select this as the Entry Point and press "OK" to confirm your selection.

STEP 7

Signal reading results for Tuner 1 and Tuner 2 screen will be displayed. Then, press "OK" to proceed to next screen.

STEP 8

Select Yes, continue and press "OK" to connect to Wi-Fi network.

STEP 9

Please wait while the box scanning for the available Wi-Fi network.

STEP 10

Select your Wi-Fi network and navigate to "Connect".

STEP 11

Please enter the password to connect to your network and press "OK".

STEP 12

You are successfully connected when this screen appears.

If the Astro Smart TV app crashes on your Smart TV, please follow the steps below:

1. Clear the App Cache

• Clear the Astro Smart TV application cache on your Smart TV.
• Once completed, relaunch the Astro Smart TV app.
• Check if the issue has been resolved.

2. Reinstall the Astro Smart TV App

• Uninstall the Astro Smart TV app from your Smart TV.
• Download and install the latest version of the Astro app from your TV's app store.
• Launch the app after installation.
• Try playing content again to verify whether the issue has been resolved.

If the app continues to crash after completing the above steps, proceed to submit report via WhatsApp or Feedback Form and provide:

• Astro ID use
• Smart TV model
• OS version
• Details of the content being played when the crash occurs

This will help our support team investigate and assist you further.

No, if your account is suspended or disconnected, you will retain your existing subscription when you reconnect.

No, you are not allowed to change your due date or maintain your old due date. Your current due date is as per Astro Policy. Therefore, to ensure that you continue to enjoy uninterrupted services, we advise you to observe this change in due date from Day 30 to Day 25 and proceed with the necessary payment.

Currently, e‑Invoicing is not mandatory for all customers. However, it is mandatory for customers who subscribe to Astro Fibre or Broadband services, as this follows the Inland Revenue Board of Malaysia’s (IRBM) national e‑Invoicing requirement.

For other Astro services, e‑Invoicing is optional, but customers are encouraged to opt in as it supports quicker processing, smoother transactions and a more seamless billing and tax compliance experience over time.

Please ensure that you are using the correct ID for eKYC submission.

For Malaysians :

1. Please ensure you are using MyKad or MyTentera.

2. Capture the front and back of your ID.

3. Ensure that there is no glare when capturing the photo.

4. Ensure that are capturing it in a bright room to have the highest picture quality.

5. Please do not cover your ID when capturing it, as it may impact the OCR Optical Character Recognition accuracy.

For Malaysian Permanent Resident and Other Nationality :

1. Please use Passport only.

2. Please capture your whole passport, which has your personal information on it and your signature.

3. Ensure that there is no glare when capturing the photo.

4. Please do not cover your ID with your when capturing it, as it may impact the OCR Optical Character Recognition accuracy.

STEP 1

On your remote, press the ... button and the Channel Guide page will be displayed on your screen.

STEP 2

Select the channel you would like to remove as favourite and press "OK".

STEP 3

Select "Remove from Favourite" and press "OK".

STEP 4

You are successfully removed the channel from favourite list when this screen appears.

The fee is a one-time activation fee that will be charged when you subscribe to the Plug & Play Box.