Step 1: At Astro Home, go to the app rail and select "beIN SPORTS CONNECT"
Step 2: Go to the Profile icon at the top of your screen and click "OK"
Step 3: A QR code will be presented on your screen. Use the in-app QR code scanner on your mobile device to scan the QR code
Step 4: Your TV screen will refresh automatically and you will be able to enjoy the beIN SPORTS CONNECT app on your TV!

Watch this video or follow below steps to Improve Slow WiFi Connection for Astro Fibre

Slow browsing using LAN cable

Looks like there is something wrong with your service connection.

Please run the Speed Test and attach the picture or screenshot of the speed test in the Feedback Form below, in order for us to provide further assistances.

Click here for Speed Test guideline.

Quick Info

A Speedtest is a service that provides free analysis of Internet access parameters, such as connection data rate.

Slow browsing using Wi-Fi

1. Router Positioning

Most people underestimate the importance of picking a good spot for a Wi-Fi router. Even a small shift in positioning could end up being the difference between day and night.

i) High vs. Low

Put the router as high up as possible to extend the broadcasting range of the radio waves. This also helps clear the router of possible interferences.

ii) Concrete & Metals

Make sure your router isn't blocked by any other objects, especially devices that are electronic. Also, avoid placing your router in your basement as this area is usually enclosed by a lot of concrete, which can be almost impossible for Wi-Fi signals to penetrate.

iii) Distance to Router

The further away from your router you get, the weaker the Wi-Fi signal. Therefore, the best option is to place your router as close to your devices as possible, but this is only practical if you have one main area where you tend to use your devices.

Otherwise, you should place your router near the center of your home. After all, Wi-Fi broadcasts in 360 degrees, so it doesn't make sense to put it at one end of the house.

2. Wireless Interference & Noise

You've probably never noticed but there are wireless signals all around you wherever you go and they're passing through you all the time. From where? Electronic devices, Wi-Fi routers, satellites, cell towers, and more.

Although Wi-Fi is supposed to be on a different frequency than most of these devices, the amount of radio noise can still cause interference. Some common causes of interference include:

i) Microwaves

ii) Bluetooth Devices

iii) Cordless Phone

3. Surrounding Wi-Fi signals

A truth of the modern world is that every household has their own Wi-Fi network, which can cause issues with channel overlap. This can be somewhat problematic in a townhouse, but is especially problematic in housing complexes and apartments where there can be many routers within close proximity.

Which is why it's important that you pick a good channel in your router settings. Modern routers can choose channels for you automatically, but sometimes it's better to investigate and find the best channel yourself.

4. Usage

More likely, however, is that the people on your network such as friends, roommates, or family members are participating in bandwidth-heavy activities like gaming and streaming Ultrabox/ Netflix.

Fortunately, if this is the case, you can prioritize your own network traffic by enabling Quality of Service in your router settings.

If the problem persists, please run a Ping Test, Traceroute Test and attach the picture or screenshot of both test results in the Feedback Form below, in order for us to provide further assistances.

Please make sure to attach the required screenshot(s) in ONE file (i.e. Microsoft Word document, PDF, Image file) before submitting the form.


Quick Info
A Speedtest is a service that provides free analysis of Internet access parameters, such as connection data rate.
A Ping Test shows how long it takes for packets to reach host.
A Traceroute Test traces the route of packets to destination host from our server.

We would need you to run few tests in order for us to understand your issue and to assist you in fixing the problem.

You may proceed with the troubleshooting steps below which should not require any longer than 15 minutes.

1. Please run each of the tests according to your your Laptop/PC Software.
2. Compile the pictures / screenshots of your test results in one file (i.e Microsof Word document, PDF file) and attach them in the Support Ticket below in order for us to assist you further:
   • List of websites effected.
   • Run the Speed Test via LAN (cable) and Wi-Fi connection - Please click here for Speed Test guideline.
   • Run the Traceroute Test - Please click here for Traceroute Test guideline.
   • Run the Ping Test - Please click here for Ping Test guideline.
3. Once you/ve gathered all the results, kindly send them all through the Feedback Form below.

Quick Info
A Speedtest is a service that provides free analysis of Internet access parameters, such as connection data rate.
A Ping Test shows how long it takes for packets to reach host.
A Traceroute Test traces the route of packets to destination host from our server.

There are 2 methods of setting maturity ratings restriction on Netflix:

Method 1 – Create a Kids Profile in Netflix App on Ultra/Ulti Box

1. On the Netflix home menu, select “Switch Profile”

1. Select Add Profile. 

1. Name the profile.

1. Select Kids. Kids profiles have a logo 'Kids' on the profile icon so they are easy to identify. 

1. Select Continue. The new profile will show on the list of profiles on your account.

Method 2 – Manually set Viewing Restrictions for each profile

1. Go to https://www.netflix.com/profiles/manage

1. Select a Profile.

1. Under Maturity Settings, select Edit.

1. Enter your Netflix password.

1. You may select the desired Maturity Rating settings or add a particular title restrictions for the profile.

1. Select Save.

For more information kindly visit:

• https://help.netflix.com/en/node/114275

• https://help.netflix.com/en/node/114276

Yes, you can! Simply South is available for all Astro customers. Kindly reach out us via WhatsApp by typing “Hi” at 03-9543 3838 to know more!

Yes, your primary box must be on Ultra/Ulti Box to get 2 months of access to Prime Video at no additional charge.
Worry not, if your primary box is the older box, contact us via WhatsApp by typing “Hi” at 03-9543 3838 to upgrade the box to Ultra/Ulti box within 24 April 2025 – 23 June 2025 to get the access.

If you accidentally delete your mesh:

1. Login to the Astro Fibre App.
2. Go to Network > click on the plus (+) sign.
3. Enter your serial number (starts with SRXxxxxx).
4. Click OK to add the mesh back.

Yes, a charge of up to RM20.00 may be imposed upon reconnection.

If you already have a WeTV subscription, you are allowed to subscribe to WeTV VIP with the same mobile number via Astro; however, your existing account will continue to run until you manually cancel it. With two active subscriptions with the same mobile number, your subscriptions will be added on top of your existing account and you will be charged twice on two separate accounts.

Yes, Astro is bounded by the PDPA. All information received will be used in accordance with our Privacy Notice

If you see the message "Unable to proceed” error, it means the content you are trying to watch is not available under your current Astro subscription package.

1. Check Your Subscription
Verify whether the Astro Smart TV is included in your Astro package via My Astro app/web (kindly refer here).

2. Ensure You're Logged In to the Correct Astro ID
Make sure you're signed in with the Astro ID linked to your active Astro account.

3. Refresh Your Account Access

• Log out of the Astro app and log back in.
• Restart the app and try accessing the content again.

If you believe the content is included in your subscription but the error persists, proceed to submit report via WhatsApp or Feedback Form and provide:

• Astro ID use
• Smart TV model
• OS version
• Error reported on device

This will help our support team investigate and assist you further.

Your Astro X3 pack will be activated immediately after you complete your sign-up. Once your sign-up is complete, you can start streaming its content immediately via the Astro app on your Smart TV or through Astro GO on supported devices

a) If you sign up via Astro’s Official Website:
You will be required to create an Astro ID and password during sign-up. Once your subscription is successfully activated, you will receive a "Welcome to Astro" email confirming your activation and can start streaming right away.
To find out more, please visit: Here
i. If you sign up via Astro Sales Agents:
ii. You will receive a “Welcome to Astro” email prompting you to create your Astro ID password and confirming your successful activation. Once your password is set, you can start streaming.

b)Important Notes:

i. When creating your Astro ID, you will be required to use an Astro ID that is not linked to an active Astro account. If the Astro ID (i.e. email address) you enter is already linked to an active Astro account, you will be prompted to use a different Astro ID

ii. However, if the Astro ID you enter is linked to an inactive Astro account, you will have the option to reuse that Astro ID.

By keying in the 10-digit account number, Astro will be able to provide better self-service options, as it allows Astro to customise automation options based on the needs of each customer's account.

The minimum internet speed required to stream via Ultra Plug & Play Box is 30Mbps for 4K UHD viewing, and Ultra/Ulti Plug & Play is 10Mbps for HD viewing. For better streaming experience, we recommend 100Mbps and above.

Not to worry, our representative will be contacting you within 24 hours.

Only Astro customers with the Sports subscription as part of their Astro TV Pack (Bundle or add-on) will be able to enjoy the beIN SPORTS CONNECT app on their Ultra/Ulti Box.

All Astro equipment is property of Astro and as per our current Terms and & Conditions, customers are required to return them upon termination of Astro services.

No, the quality of your video depends on the speed and reliability of your internet.

Yes, you can log in using the same email address or mobile number associated with your existing Disney+ subscription.

Yes, you will enjoy an Ulti box when subscribing to Primary/Entertainment/ Movie Pack OR an Ultra box when subscribing to Sports/Sports+/Movies+/Premium 1/Premium 2/Premium 3/Platinum Pack.

You will get FREE installation for both Ultra/Ulti box upon signing up with Astro & Broadband.

If you're trying to visit a website and it won't load, but others do, there could be a variety of causes. If the site itself is down, there's not much you can do but wait.

If you can load the site on other computers or devices (make sure you try different means of connecting to the internet), there may be an issue with your computer or network.

There are some quick fixes that will solve most problems, but you may have to get your hands a little dirty.

1. Try loading the site on a different device.

Try loading the website on your phone or on another computer. If the website loads on the other device, the problem lies with your computer.

If the website doesn't load on another device, the problem is either with the network or the website itself.

2. Restart your computer.

Oftentimes, a simple reboot will fix the problem you're having. Reboot your computer and test the website again.

3. Try loading the site in a different browser.

There may be some settings configured incorrectly on your browser. Try a different web browser to see if you can load the website.

4. Temporarily disable your antivirus program.

Your antivirus software may be interfering with your ability to load certain websites.

Try disabling the software and then loading the site again. Make sure you enable it again once you have identified the problem.

5. Reset your modem and router.

Traffic to or from a certain website may be getting tripped up by your modem or router. Resetting these devices may allow you to access the website again.

6. Check your computer's date and time settings.

If your date or time is set incorrectly, you may not be able to connect to secure (https://) websites.

Check your computer or mobile device's clock to make sure that it is set to the correct time and date.

7. In the event the problem persists, please provide below details for further escalation:

i. List of websites effected.

ii. Run the Speed Test via LAN (cable) and Wi-Fi connection - Please click here for Speed Test guideline.

iii. Run the Traceroute Test - Please click here for Traceroute Test guideline.

iv. Run the Ping Test - Please click here for Ping Test guideline.

Once you've gathered all the results, kindly send them all through the Feedback Form below.

Quick Info
A Speedtest is a service that provides free analysis of Internet access parameters, such as connection data rate.
A Ping Test shows how long it takes for packets to reach host.
A Traceroute Test traces the route of packets to destination host from our server.

Currently, e‑Invoicing is not mandatory for all customers. However, it is mandatory for customers who subscribe to Astro Fibre or Broadband services, as this follows the Inland Revenue Board of Malaysia’s (IRBM) national e‑Invoicing requirement.

For other Astro services, e‑Invoicing is optional, but customers are encouraged to opt in as it supports quicker processing, smoother transactions and a more seamless billing and tax compliance experience over time.

Astro Cloud is a virtual storage that allows you to record and watch your favourite TV shows on Astro GO anytime, anywhere. Customers can enjoy 200 hours (500 GB) of cloud recording on Astro GO web and mobile app, and on your Astro Box (if applicable) at no additional cost.

To check your remaining Cloud storage space, go to Settings > My Devices, you will find your cloud storage information here.

You can upgrade your storage to a total of 1,500 hours (4000gb) with the Astro GO+ add-on for RM 5.99/month.

Kindly visit https://myastro.astro.com.my/ or call us at 03-7490 8102 to upgrade your storage plan.

Yes. To change the language, go to the app’s side menu, then go to Settings and select the preferred interface language.

Transfer of Equipment Ownership

A request to transfer the equipment’s ownership from the existing account holder to a new account holder.

Note: Transfer of Equipment Ownership is not applicable for Astro Broadband (Maxis, TIME, Allo), standalone Astro Fibre and NJOI account.

Merge of Equipment

A request from the account holder to merge the equipment from two different accounts into one account, provided the equipment must be within the same service address and registered under the same accountholder’s name.

Split of Equipment

A request from the account holder to split the equipment from one account to two different accounts and registered under the same account holder’s name.

For technical visit, the current fees will remain unchanged i.e.: 8% Service Tax absorbed by Astro. As for installation fees, current fees will remain unchanged i.e.: 6% Service Tax has already been included in installation fees, as 2% will be absorbed by Astro.

You will be contacted by an Astro representative within two working days to advise you on the next course of action.

No. There will be no changes to your monthly subscription fee as part of the refreshed channel lineup. You will continue to enjoy your current pack at the same price, along with the new channels and content additions.

If you’re an HBO Pack add‑on customer, you’ll continue paying the same RRP amount (depending on your subscription plan – Standard/Premium). If you’re on a combo plan / 50% discounted offer, you’ll keep to the discounted price until the promo expires. After the expiry, you may continue to subscribe to the HBO Max app as an ala carte add‑on via Astro from RM24.90/month.

The recommended home internet speed for a smooth viewing is 30Mbps.

You have exceeded the maximum number of registered devices allowed. To manage devices on Astro GO, go to Settings > Registered Devices to view / remove devices from the list of registered devices to your account.

If you are still having issues, proceed to submit report via WhatsApp or Feedback Form.

BYOND / PVR / Ultra Box

To dismantle ONLY - FOC

To reinstall ONLY – RM65

To dismantle and reinstall - RM65

Broadband / IPTV

Relocation within 6 months of contract start will be charged a RM500.00 relocation fee, and the contract will be renewed to a new 24-month contract.

Relocation after 6 months of contract start will have their contract renewed to a new 24-month contract.

Note For IPTV Customers:

1. Upon relocation request, all exiting IPTV customers will be converted to our Astro & Broadband service. Customers can choose to have standard Astro service with satellite dish, or unicast Plug & Play without satellite dish.

2. If customers choose to have satellite dish, an additional RM150.00 will be charged for satellite installation. If customers choose to have unicast Plug & Play service, no satellite dish is required, hence no extra charge will be incurred.

*Please note that additional charges may apply if the reinstallation process requires extra cables/fixings.

Any Astro GO compatible device (mobile/tablet/PC) and Multiroom Smart TV* compatible TVs will benefit from Astro GO+.

You may cancel your iQIYI subscription in the app by following these steps:
Step 1: Go to Home Page
Step 2: Click on "VIP subscription"
Step 3: Click on "Manage VIP subscription" (Gear icon)
Step 4: Click on "Cancel VIP subscription"

Yes! You can call our courier agent back/installer directly to reschedule the collection date and time.