Yes, please visit Astro's Self Service Portal via

myastro.astro.com.my

to update your email address or mobile number.

Customers who have activated the trial will be notified before it expires. They can choose to continue by subscribing at a price that will be disclosed later. If they are not interested, the trial will automatically expire after 2 months with no action required from them. Your Prime Video access will auto-expire, and you won’t be charged. However, please visit

https://product.astro.com.my/apps/primevideo

to stay updated on Prime Video.

For Astro Ultra Box or Ulti Boxes, you will be able to see an itemised charge called "Box Fee” in your Astro bill.

Starting 24 April 2025 – 23 June 2025, Ultra and Ulti Box customers will receive 2 months access to Prime Video by Amazon at no additional cost, as well as access to Prime Video via the website and mobile app. If you have yet to upgrade to our latest Ultra/Ulti Box, please reach out to us via WhatsApp by typing “Hi” at 03-9543 3838.

You can request for a password reset by clicking on "Forgot My Password' at the login page.

E‑Invoicing is a fully digital version of your invoice that is created and shared electronically based on the Inland Revenue Board of Malaysia’s (IRBM) national e‑Invoicing requirement. Instead of using paper or manual documents, everything is processed digitally for a smoother and more secure billing experience.

There are no changes to your charges, but the way your invoice is generated becomes more efficient and in alignment with national tax requirements.

If your Astro service is suspended, your Disney+ subscription will be paused and will only resume once your Astro service has been reinstated.

If your Astro service is terminated, your Disney+ subscription through Astro will also be terminated.

Yes, eKYC verification is mandatory. In addition, this verification process helps to reduce manual handling of customer's personal information and secure against unauthorised usage.

To set up a Mesh WiFi network around your house, the Mesh unit will need to be paired with the WiFi router. Steps to pair these two devices are as follows:

i. Place the Mesh unit close to the WiFi router (within 2 meters) and power it on

ii. After the Mesh unit starts up, press and hold the WPS buttons of the Mesh unit and the WiFi router for 3 - 5 seconds in turn within 2 minutes

iii. After the WLAN and Internet indicators of the Mesh turns steady blue, the Mesh is connected to the Internet

iv. Move the Mesh to the desired place where you need to expand WiFi and power it on. After the Internet indicator turns steady blue, WiFi is expanded successfully.

Currently, this change affects SMS bills only. Other SMSs such as (but not limited to) bill reminders, payment notifications, promotional SMSs or technical appointment reminders will still be sent to you if applicable.

For any transaction, you will be prompted with a push notification alert to replace SMS OTP. Tap on the push notification to view the secure verification screen, that allows you to "Approve" or "Reject" the transaction within 50 seconds. Rejected transactions will not be processed. If transaction is performed from a different device, the push notification alert will still be sent to your SecureGo registered device for approval.

1. Open/Download the My Astro app or visit My Astro web.

2. Login with your Astro ID.

3. Go to Account.

4. Select 'Profile'.

5. Under Email, tap on the edit icon.

6. Enter the 6-digit One Time Pin and tap 'Verify'.

7. Select 'Approve' to update email address.

8. Enter the new email and tap 'Save'.

9. A successful notification will be displayed.

No. Astro GO is a FREE entitlement exclusively for customers with an Astro subscription. If you do not have an Astro subscription account, please visit astro.com.my to find out more.

No, you will not be able to watch beIN SPORTS CONNECT content outside of Malaysia as the app is geo-blocked for each country.

If you are an Astro subscriber
Step 1: Launch the Astro Smart TV app on your Smart TV.

Step 2: Select “Log In”.

Step 3: Scan the QR code OR visit astro.com.my/tvapp and enter the code on the screen.

Step 4: Enter your Astro ID (registered email or mobile number) and password. If you do not have an Astro ID, click on “Create now”.

Step 5: Once you have successfully logged in, the Astro Smart TV app will refresh automatically, and you will be able to access it.

If you are NOT an Astro subscriber
Step 1: Launch the Astro Smart TV app on your Smart TV.

Step 2: Select “Subscribe Now”.

Step 3: Scan the QR code to visit https://www.astro.com.my/#main and explore Astro’s packs or Multiroom (Smart TV).

Step 4: Once you have successfully subscribed, kindly follow Step 1 – 5 under “If you are an Astro subscriber” to log in.

No, your subscription will be terminated at the end of your Astro billing date. Until then, you will still be able to access ZEE5 premium.

The Ultra/Ulti Plug & Play Box comes with a one-year box hardware warranty.

For self-installation, there is a warranty seal at the bottom of the Ultra/Ulti Plug & Play Box, which must not be removed or tampered with as this would void the one-year Ultra/Ulti box hardware warranty.

STEP 1

Press "HOME" button on your remote control.

STEP 2

Navigate to Settings and press "OK".

STEP 3

Navigate to Digital Audio and press "OK".

STEP 4

Choose your preferred selection and press “OK”.

STEP 5

Select Yes, continue and press "OK" to confirm on the changes.

Otherwise, select No, go back to cancel.

For any NJOI-related information, please visit the NJOI Help & Support page at

https://purchase.njoi.com.my/en-support

When Band Steering is enabled, only one SSID network name with one password is available. Example:

i. SSID: SSID, Password: 12345678

No, you will not be able to manage your account with the Astro Fibre App. However, you may download the “MyAstro” app on your mobile device now to manage your Astro account in a fast and easy way.

Yes, you can continue to access Prime Video if you have an active subscription to the Epic or Movie packs, where Prime Video is included.

If you upgraded to a pack that includes Prime, you do not need to reactivate Prime Video. Streaming access will continue seamlessly.

If you downgraded from a pack that includes Prime Video, you will need to reactivate Prime Video to resume streaming and retain your watch history.

Your watch history is linked to the Prime Video account that was initially activated. Therefore, if you reactivate Prime Video using the same email address or mobile number used during the original activation, your previous watch history will be restored.

Note: If you are on any other pack, you will need to purchase Prime Video separately at RM25 month to continue enjoying access.

STEP 1

On your remote, press the HOME button.

STEP 2

Navigate to Update Satellite Frequency and press “OK”.

STEP 3

Choose Test Satellite Frequency and press “OK”.

STEP 4

Select Yes, continue and press "OK" to start the test.

Otherwise, select No, go back to cancel.

STEP 5

Satellite Frequency Test progress screen will be displayed.

STEP 6

The test result will be displayed once completed.

Press "OK" to go back to channel.

You are attempting to play a content that is not part of your subscription. If you are not able to play a content that you are subscribed to, proceed to submit report via WhatsApp or

Feedback Form

.

Astro does not provide installment plan facilities. You are advised to pay your charges before the due date, as per your monthly bill statement.

All Astro equipment is property of Astro and as per our current Terms and & Conditions, customers are required to return them upon termination of Astro services.

By changing from a 12-months commitment period to 24-months, there will not be any cancellation fee applicable. You will start a new contract with 24-months commitment and receive the corresponding discount for that duration.

To access the app, please ensure the following:
You are an existing Astro Fibre customer, and you have a valid Astro ID and password to log in.

If you still cannot access the app:
Make sure you have the latest app version from the App Store/Google Play Store. If it is not the latest versioan, please update the app and try again.

STEP 1: Power Off the Box

Switch off the power for your box. Ensure the adapter's power light is off.

STEP 2: Remove the Smart Card

Locate the Smartcard at the front or right side and gently pull it out.

STEP 3: Clean the Smart Card

Wipe the Smartcard's gold chip clean using a dry soft cloth.

STEP 4: Reinsert the Smart Card

Make sure the gold chip is facing upwards. Insert the Smart Card fully into the slot until it seats firmly.

STEP 5: Power On the Box

Switch on the power for your box and make sure that the adapter's power light is on. Please wait for 5 minutes.

STEP 6: Turn On the Box

Power on the box and check if the issue is resolved.

If issue persist, please submit the issue on our Feedback Form and attach a picture of your smart card number for assistance or chat us via WhatsApp at 03-95433838.

Byond Box (DMT 5)

STEP 1

Switch on the power for your box and make sure that the adapter's power light is on.

STEP 2

Put the box on standby mode.

STEP 3

Press and hold the Home button on the box.

STEP 4

Wait until "boot" appear on the front panel and released.

STEP 5

New Installation Settings page will appear.

Click here for the guides to complete the setup.

Byond Box (DMT 4)

STEP 1

Switch off the power of your box and ensure the adapter�s power light is off.

STEP 2

Switch on the power of your box and ensure the adapter�s power light is on.

STEP 3

Press and hold the Ch+ and Ch- keys on the box simultaneously when the "boot" message appears on the front panel.

STEP 4

Wait until the "Clr" message appears on the front panel, then release the Ch+ and Ch- keys.

STEP 5

New Installation Settings page will appear.

Click here for the guides to complete the setup.

Byond Box (Zapper)

STEP 1

Ensure your box is on standby mode. (Red light on box's front panel).

STEP 2

Press and hold the Standby button. Wait until the LED at front panel change from red to green for 3 times, then release the button.

STEP 3

New Installation Settings page will appear.

Click here for the guides to complete the setup.

Byond Box (New Zapper)

STEP 1

Switch off the power of your box and ensure that the adapter�s power light is off.

STEP 2

Switch on the power of your box and ensure that the adapter's power light is on.

STEP 3

Keep pressing the 'Power' button until the Startup Option screen appears.

STEP 4

Press "369" on the remote control to trigger refresh box setting menu.

STEP 5

Press "OK" to proceed. The box will be refreshed to the original setting.

STEP 6

New Installation Settings page will appear.

Click here for the guides to complete the setup.

As a rule of thumb, this issue might happen when the devices are not equipped with minimum requirement above that supports the subscribed internet speeds:

• WiFi technology
• Network Interface Card (NIC)

As mentioned above however, it is important to note that despite meeting the device minimum requirements, it is not a guarantee that devices connected over WiFi will be able to achieve maximum subscribed internet speeds due to the following:

1. Bad WiFi signal quality and coverage across the area due to:
   • Distance from the RGW/Mesh AP with connected device
   • Obstruction within the house (walls, metallic surfaces)
   • Interference with other household appliances
2. Congested bandwidth
   • If there are too many devices connected to the WiFi network, then the bandwidth might be overloaded with traffic hence, slowing down the speed
3. Devices are connected using WiFi instead of wired using LAN.
   • It is important to note that wired connection offers better reliability and speed over WiFi.
   • WiFi is more prone to interference compared to a wired connection which causes lower speeds and dropped signal.
4. Router Positioning: Most people underestimate the importance of picking a good spot for a Wi-Fi router. Even a small shift in positioning could end up being the difference between day and night:
   • High vs. Low: Put the router as high up as possible to extend the broadcasting range of the radio waves. This also helps clear the router of possible interferences.
   • Concrete & Metals: Make sure your router isn’t blocked by any other objects, especially devices that are electronic. Also, avoid placing your router in your basement as this area is usually enclosed by a lot of concrete, which can be almost impossible for Wi-Fi signals to penetrate.
   • Distance to Router: The further away from your router you get, the weaker the Wi-Fi signal. Therefore, the best option is to place your router as close to your devices as possible, but this is only practical if you have one main area where you tend to use your devices. Otherwise, you should place your router near the center of your home. After all, Wi-Fi broadcasts in 360 degrees, so it doesn’t make sense to put it at one end of the house.
5. Usage
   • More likely, however, is that the people on your network such as friends, roommates, or family members are participating in bandwidth-heavy activities like gaming and streaming Ultrabox/Netflix.
   • Fortunately, if this is the case, you can prioritize your own network traffic by enabling Quality of Service in your router settings.
   • If the problem persists, please run a Ping Test/Traceroute Test and attach the picture or screenshot of both test results in the Feedback Form below, in order for us to provide further assistances. Please make sure to attach the required screenshot(s) in ONE file (i.e. Microsoft Word document, PDF, Image file) before submitting the form.

Note:
Astro and its service providers will not offer any guarantees for compatibility of the customer's equipment (e.g., Personal Computer, Notebook, printers) nor provide on site troubleshooting for WiFi service issues related to the customer's equipment.

Please submit the feedback form and ensure the required document is attached for our review.

For more information on the product including offers and setup, visitproduct.astro.com.my/multiroom.

No, the Astro Fibre App is a free mobile application for all Astro Fibre customers with the RG21 router or RG31 (launching soon) router. However we may introduce paid services in the future via the app.

You will regain access to your channels on Astro immediately once the equipment has been installed at your new house, provided your account is active. Customers can still enjoy viewing via Astro Go.

Successful payment via JomPAY will be posted real time.

Occasionally, an additional verification step may be required, such as entering a mobile number. This helps ensure a smooth and secure activation experience.

Once the e-invoicing is activated, you cannot change your bill delivery method. If you do, your e-invoice will be automatically deactivated.

Astro X3 allow up to 2 concurrent streams at the same time, shared across your registered devices. If you’d like to enjoy more simultaneous viewing, you can add GO+ to increase to up to 4 concurrent streams for RM5.99 per month (exclusive of SST). While streaming is flexible across devices, only one Smart TV can be used at a time. The remaining streams can be used on mobile or other supported devices via Astro GO.

There are two ways for you to switch your preferred bill delivery method:

A. Customers can manage their account via the My Astro Portal by following these easy steps:

1. Visit www.astro.com.my
2. Select “My Account”, then select “Manage Account”
3. Log in to My Astro Web using your Astro ID
4. Select “Account”
5. Under “Billing”, click on “Bill Delivery Method”
6. Choose your preferred bill delivery method, then click “Proceed”

B. Customers can also manage their account via Astro’s mobile application, the My Astro app by following these easy steps:

1. Open the “My Astro” app on your smartphone. If you do not have it installed, you may download it here (Google Play Store) or here (IOS App Store)
2. Log in with your Astro ID
3. Select “Account” in the navigation bar
4. Select “Bill Delivery Method”
5. Choose your preferred bill delivery method, then click "Proceed

If you don't know your HBO Max password, you can reset it. You need to have access to your account email to reset your password:

1. Do one of the following:
   • On the HBO Max sign-in screen, choose Forgot Password?
   • Go to hbomax.com/forgot-password.
2. Enter your HBO Max (or HBO Max) account email and choose Submit. Forgot your account email?
3. Check your inbox for a HBO Max Password Reset email. This email should arrive within a few minutes.
4. Open the most recent Password Reset email and choose Reset Your Password.
5. Enter a new password and choose Save.

Now, sign in with your account email and your new password.If you don't get a HBO Max Password Reset email, go to Can't reset password.

You may register up to four (5) devices.

To remove devices on Astro GO, click on Settings > Registered Devices to view and remove a device(s) from the list of devices registered to your Astro ID.

No. When you log in to the new Disney+ app using the same email address or mobile number associated with your existing Disney+ subscription, Disney+ will match the subscription linked to your account, so you can continue using your current subscription without duplicate billing.

The following Smart TV models are supported:
a) Samsung TV (2020 models and above) with Tizen OS 4.0+

b) LG TV (2020 models and above) with WebOS 4.0+

c) Android TV (Android 8.0 and above)
Please refer to the complete list of Android TV brands supported by the Astro Smart TV app below:

*Also supported on Google TV, Oppen, CAIXUN, Mecoo

No. There will be no changes to your monthly subscription fee as part of the refreshed channel lineup. You will continue to enjoy your current pack at the same price, along with the new channels and content additions.

If you’re an HBO Pack add‑on customer, you’ll continue paying the same RRP amount (depending on your subscription plan – Standard/Premium). If you’re on a combo plan / 50% discounted offer, you’ll keep to the discounted price until the promo expires. After the expiry, you may continue to subscribe to the HBO Max app as an ala carte add‑on via Astro from RM24.90/month.

Please refer below to set up your Ultra/Ulti Plug & Play Box.

To connect via LAN cable:

1. Switch off your old Astro box.
2. To connect your Plug& Play Box via LAN cable:
   a) Remove the LAN cable from your old Astro box and connect the LAN cable to your new Plug & Play Box.
   i) For Maxis IPTV customers, keep the other end of the LAN cable connected to your router.
   ii) For TIME IPTV customers, go to the other end of the same LAN cable, plug it out from your modem, and into any LAN port on your router. Ensure that you’re not plugging your LAN cable back into the same box.
   

Note: If you have a two-in-one modem & router, you can skip Step ii).

To connect via Wi-Fi:

Remove your LAN cable from your old Astro box, and do not plug it into your new Plug & Play Box.

You will not be able to switch between channels, use the app as a remote control, view favorite channels and programmes, use programme showtime reminder, and remote record feature.

You will only be able to watch Astro GO and/or Multiroom Smart TV on up to 2 devices at the same time as opposed to 4 devices with Astro GO+.

Your cloud recording storage will also decrease from 1500 hours down to 200 hours. Your stored recordings/downloaded shows that exceed 200 hours will also be removed.

For customers with the Ultra or Ulti Box, you will be charged a fee of RM100 (not inclusive of Govt. tax) upon confirmation of lost Astro Box and Smart Card/SIM Card.

For lost Smart Card/SIM card only, you may be charged RM50 to obtain a replacement.