Once you have received the eKYC link via SMS/email/astro.com.my, you can proceed to follow the instructions on the screen. You can check out the step-by-step image below for more info.

For MyKad/MyPR/MyTentera :

For Passport :

Step 1: Launch Prime Video from application rail (under HOME page)

Step 2: Once redirected to the Prime Video app, Click the “Sign-in” button to proceed.

Step 3: Pair your Ultra Box/Ulti Box by scanning the QR Code.

Step 4: Sign-in using Prime Video account. If you have forgot your Prime Video username, sign in using Astro registered email or you can recover your Prime Video subscription here.

Step 5: After sign-in, choose your profile to proceed.

Step 6: Enjoy watching the content!

Yes, you can activate your access anytime between April 24, 2025, and June 23, 2025, to get 2 months of access to Prime Video at no additional charge. Please note that the offer is subject to change. All sign-ups are also subject to the Prime Video app usage terms and conditions.

Please ensure that your Ultra or Ulti Box is set as the primary (main) decoder to enjoy 2 months of access to Prime Video at no additional charge.

If your primary box is an older model, don’t worry as you can still enjoy this offer by upgrading to an Ultra/Ulti Box within the offer period. Just contact us to arrange your upgrade.

E‑Invoicing is a fully digital version of your invoice that is created and shared electronically based on the Inland Revenue Board of Malaysia’s (IRBM) national e‑Invoicing requirement. Instead of using paper or manual documents, everything is processed digitally for a smoother and more secure billing experience.

There are no changes to your charges, but the way your invoice is generated becomes more efficient and in alignment with national tax requirements.

You can have up to five (5) devices registered to your account at any given time. However, you can only stream from one (1) device at a time.

If an error message on your TV has one of the following keywords:
- Channels are temporarily unavailable due to bad weather.
- Service Currently Not Available
- SCNA
- (Code: SCNA)

You can proceed with below troubleshooting if the weather is good. Otherwise, you may try again later.

STEP 1: Check Weather Conditions

If the weather is bad, wait until it clears before proceeding.

STEP 2: Access STB Diagnostics

2a. Press the Home button on your Astro remote.

2b. Navigate to Settings and press OK.

2c. Navigate to STB Diagnostics and press OK.

STEP 3: Check Signal Strength

Refer to the signal strength % shown on the top left of your screen.

If it is 65% or higher, please take the screenshot and submit your Feedback Form.

If it is below 65%, please go to Step 5.

STEP 4: Power Off the Box

Switch off the power for your box and make sure that the adapter’s power light is off.

STEP 5: Reconnect Satellite Cable

Unscrew the satellite cable from the box and pull it out.

Plug the satellite cable back into the box and screw it back securely.

STEP 6: Power On the Box

Switch on the power for your box and make sure that the adapter’s power light is on.

Please wait for 5 minutes.

STEP 7: Contact Astro Support

If issue persist, please submit the issue on our Feedback Form and attach a picture of your General tab of the STB Diagnostics for assistance or chat with us via WhatsApp at 03-9543 3838.

Centralised Dish

If your Astro Box is connected to your apartment or condo building's centralised dish and the issue persists, please contact your respective Building Management before reaching out to our agents.

Yes, you will be able to rent titles on the WeTV mobile app. Subsequently, you will be able to stream your rented title on the Ultra/Ulti Box,

wetv.vip

, and the mobile app.

If you receive the "Device Was Not Found" error message, it may be because your device has been automatically removed due to concurrent streaming limits being exceeded.
Please perform the following checks and troubleshooting steps:

1. Stop streaming on one of the other devices currently using your Astro account.
2. Close the Astro Go app on any unused devices.
3. Return to your Smart TV and try streaming again.

If you are unable to remove a device or continue to see the error message, proceed to submit report via WhatsApp or Feedback Form and provide:

• Astro ID use
• Smart TV model
• OS version
• Error reported on device

This will help our support team investigate and assist you further.

For customers with the Ultra or Ulti Box, you will be charged a fee of RM100 (not inclusive of Govt. tax) upon confirmation of lost Astro Box and Smart Card/SIM Card.

For lost Smart Card/SIM card only, you may be charged RM50 to obtain a replacement.

Refund fee is subject to your processing bank. However, Astro did not impose refund processing fee.

The new Astro X3 packs and existing Astro One packs differ in how customers access Astro services and content, as shown below:

Please submit your issue

here

or you can WhatsApp us at 03-9543 3838.

To request for a move, you may choose to:

(The fastest way) Self-serve by logging in to My Astro and follow the steps below:

1. Download the My Astro app or use the web version of My Astro
2. Login using your Astro ID
3. Go to Account > Profile > Address
4. Tap on the edit icon on 'Service address'
5. Verify your identity via SecureGo or OTP
6. Fill in your new address and confirm your relocation
7. A support ticket will be created and we will be in touch

OR

Submit your feedback via below link: https://support.astro.com.my/feedback-form

1: Choose Feedback Type

• Type: Technical issues
• Issue: I want to enquire about installation/ relocation

2: Fill in the form and click “Submit” support ticket.

To check on your termination status or date, you may:

1) Message us on WhatsApp at 03-9543 3838. Type Termination Status
2) Submit Feedback Form
3) Reach out via Astro Official Digital platform i.e. Facebook or Chat.

Our agent will provide the information you need.

Unfortunately, this means that you are using a TV model that does not support 4K UHD resolution (Sony BRAVIA 4K GB, Sony BRAVIA 4K UR or Sony BRAVIA VH).

Not to worry, we are working with the Sony team to ensure you will be able to enjoy these 4K UHD channels soon. We will keep you posted once these channels are available to you!

The contract period for TV packs will be 24-months upon sign up. In addition to the TV packs, if you would like to also sign-up for Broadband, the contract commitment will be 24 months too.

- Credit or Debit Cards
- Visa
- Mastercard
- Maybank2U - Pay using your Maybank2U account
- FPX - Pay using any local bank account via FPX
- E-Wallet - Touch "n Go

For Ultra/Ulti Plug & Play Box installation, it is recommended that you attempt to self-install by following the installation guide here, but there is an option to request for an installer to install the box at your premise. However, there will be a separate fee for this service request.

Please submit the feedback form and ensure the required document is attached for our review.

If you're trying to visit a website and it won't load, but others do, there could be a variety of causes. If the site itself is down, there's not much you can do but wait.

If you can load the site on other computers or devices (make sure you try different means of connecting to the internet), there may be an issue with your computer or network.

There are some quick fixes that will solve most problems, but you may have to get your hands a little dirty.

1. Try loading the site on a different device.

Try loading the website on your phone or on another computer. If the website loads on the other device, the problem lies with your computer.

If the website doesn't load on another device, the problem is either with the network or the website itself.

2. Restart your computer.

Oftentimes, a simple reboot will fix the problem you're having. Reboot your computer and test the website again.

3. Try loading the site in a different browser.

There may be some settings configured incorrectly on your browser. Try a different web browser to see if you can load the website.

4. Temporarily disable your antivirus program.

Your antivirus software may be interfering with your ability to load certain websites.

Try disabling the software and then loading the site again. Make sure you enable it again once you have identified the problem.

5. Reset your modem and router.

Traffic to or from a certain website may be getting tripped up by your modem or router. Resetting these devices may allow you to access the website again.

6. Check your computer's date and time settings.

If your date or time is set incorrectly, you may not be able to connect to secure (https://) websites.

Check your computer or mobile device's clock to make sure that it is set to the correct time and date.

In the event the problem persists, please provide below details for further escalation:

i. List of websites effected.

ii. Run the Speed Test via LAN (cable) and Wi-Fi connection - Please click here for Speed Test guideline.

iii. Run the Traceroute Test - Please click here for Traceroute Test guideline.

iv. Run the Ping Test - Please click here for Ping Test guideline.

Once you've gathered all the results, kindly send them all through the Feedback Form below.

Quick Info
A Speedtest is a service that provides free analysis of Internet access parameters, such as connection data rate.
A Ping Test shows how long it takes for packets to reach host.
A Traceroute Test traces the route of packets to destination host from our server.

STEP 1

Switch off the power for your box and make sure that the adapter's power light is off.

STEP 2

Locate the SIM card at the left side and gently pull it out.

STEP 3

Wipe the SIM card's gold chip clean using a dry soft cloth.

STEP 4

Make sure the gold chip is facing down and reinsert it all the way in.

STEP 5

Switch on the power for your box and make sure that the adapter's power light is on.

Please wait for 5 minutes.

STEP 6

Turn on your Ultra Box. You should no longer be experiencing this problem.

If issue persist, please submit the issue on our Feedback Form with the error details and provide sim card number for assistance.

Yes, you can! Kindly refer to the step above and log in with your Simply South details. However, kindly take note if you are interested to enjoy Astro’s exclusive pricing, you would need to discontinue your current Simply South subscription and resubscribe with Astro by sending us a WhatsApp message, “Hi” to 03-9543 3838.

Yes, this is a one-time approval, and you do not need to submit your application every month.

If you need further help with the Astro Fibre app, you may call our Customer Contact Centre at 03 - 9543 1543 and an Astro agent will be available to assist you immediately.

After order submission, the Plug & Play Box and Astro SIM card will be couriered separately to your service address. The delivery dates with the tracking numbers will be communicated via SMS.

The Plug & Play Box and Astro SIM card should arrive within 3-working days after your order submission. You may self-install your box by following the guide here.

Yes, your advance payment will be fully refunded if you cancel your subscription before the Astro box installation. Please WhatsApp "Hi" to us at 03-9543 3838. Then select Billing Services, provide your IC number if requested, and choose Refund Request.

The refund process will take approximately 14 days for processing with your issuing bank.

However, if you decide to cancel your subscription after the Astro box installation (during your contract period), a prorated early termination fee will apply.

You can be assured that your data are safe with us. Astro implemented sufficient security measures to protect customer data and fully comply to Personal Data Protection Act

1. Ensure power cable is connected tightly.

2. Try to use another power socket / power source to eliminate faulty power sockets/power sources which could cause the issue.

3. If the issue persists, submit your feedback form for further assistance.

You can activate Disney+ through the following methods:

a. Astro Ultra or Ulti Box

b. My Astro app or web

c. Email

d. WhatsApp

Kindly refer to the steps below to activate:

Option A: Activate on Astro Ultra or Ulti Box

STEP 1

Click on the Disney+ app logo under the Apps rail on your Home page

STEP 2

Scan the QR code or visit the website on screen to activate via Disney's platform

STEP 3

Enter your email address

STEP 4

Enter your mobile number

Only applicable for activation through Mobile

STEP 5

Create your password

STEP 6

Enter your birthday

STEP 7

Click Proceed and log in to start watching Disney+ on your TV screen

Option B: Activate on My Astro app or web

STEP 1

Log in to My Astro app or web

STEP 2

Go to Manage Subscription → Add-ons

STEP 3

Click Activate now under the Disney+ add-on

STEP 4

Confirm the SecureGo request

STEP 5

Click on Proceed to activate via Disney's platform

STEP 6

Enter your email address

STEP 7

Enter your mobile number

Only applicable for activation through Mobile

STEP 8

Create your password

STEP 9

Enter your birthday

STEP 10

Log in to start watching Disney+

Option C: Activate via Email

STEP 1

Click on the Disney+ app icon in the activation email to activate via Disney's platform

STEP 2

Enter your email address

STEP 3

Enter your mobile number

Only applicable for activation through Mobile

STEP 4

Create your password

STEP 5

Enter your birthday

STEP 6

Log in to start watching Disney+

Option D: Activate via WhatsApp

STEP 1

Click on the Disney+ activation link in the WhatsApp activation message to activate via Disney's platform

STEP 2

Enter your email address

STEP 3

Enter your mobile number

Only applicable for activation through Mobile

STEP 4

Create your password

STEP 5

Enter your birthday

STEP 6

Log in to start watching Disney+

If your My Astro App is still accessible, you may go to Account then scroll down to Support & Settings. Click Submit Your Enquiry to provide your feedback either through the feedback form.

OR

You may submit your feedback here.

Step 1: You request for a move - here's how.

Step 2: One of our agents will contact you within 24 hours to set an appointment if you’re using My Astro app.

Step 3: You will receive a reminder of your appointment an hour before your scheduled time.

Step 4: The technician will dismantle your satellite dish.

If there is no satellite dish, customers should dismantle the modem, router, and decoder by themselves.

Step 5: You will need to transport your device(s) to your new home.

Step 6: The technician will reinstall your satellite dish, (including modems and routers for broadband customers) at your new home based on the schedule appointment.

Note For IPTV Customers:

1. Upon relocation request, all exiting IPTV customers will be converted to our Astro & Broadband service. Customers can choose to have standard Astro service with satellite dish, or unicast Plug & Play without satellite dish.

2. If customers choose to have satellite dish, an additional RM150.00 will be charged for satellite installation. If customers choose to have unicast Plug & Play service, no satellite dish is required, hence no extra charge will be incurred.

Astro & Broadband comes with 24-month contract commitment.

Step 1: Click "Log in" and click "Forgot my password"
Step 2: Enter your email address and click "Submit"
Step 3: An email will be sent to your registered email address with further instructions on how to reset your password

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to SETTINGS and press "OK".

STEP 3

Navigate to STB Diagnostics and press "OK".

STEP 4

Navigate to Network Diagnostics and press "OK" .

STEP 5

Please ensure the Tunes service multicast status is Multicast Up.

If the status is Multicast is Not Available, please reboot the decoder and router before verifying this status.

If issue persists, please submit the issue on our Feedback Form with error details and attach a picture of your Network Diagnostics.

Successful payment via JomPAY will be posted real time.

If you are having difficulty remembering your password, you can reset it easily on the My Astro website or My Astro app by following these simple steps:

• Step 1: Click on “Forgot Password?” on the Astro ID login page

• Step 2: Enter your email address or mobile number. A verification code will be sent to you. Enter the code in the field and click “Verify” to reset your password.

Yes, customers will be charged 8% Service Tax on switching fee for any services rendered on or after 1st March 2024.

You can recover your Prime Video subscription here. Below are the steps.

Step 1: Visit the Recovery Page
Go to: https://www.astro.com.my/account-recovery/prime

Step 2: Log In to Your Astro Account
If prompted, sign in with your Astro ID. If you're already logged in, proceed to the next step.

Step 3: Click “Proceed”
This will initiate the recovery process.

Step 4: View Your Sign-In Hint
A hint for your Prime Video login email/mobile number will be displayed. Use this hint to help you log in to your Prime Video account.

Due to copyright restrictions, certain shows may not be available for live streaming. However, many shows become available for on-demand streaming shortly after their original airing. The availability and timing can vary depending on the specific show, streaming service, and licensing agreements in place.

You will be able to check your balance, switch to e-billing, request for payment barcode and request for reconnect at standard telco rate.

STEP 1
On your remote, press the Home button and the Home Page will be displayed on your screen.

STEP 2
Navigate to Profile.

STEP 3
The Profile Selection Screen will be displayed.

STEP 4
Navigate to Edit Profile.

STEP 5
Choose a profile to edit.

STEP 6
Navigate to Delete Profile.

STEP 7
Click Confirm to delete your profile.

STEP 8
The deleted profile will be removed from the Profile Selection Screen.

1. Please use a LAN ethernet cable and connect your computer/laptop to the back of the Maxis Router.

2. You may open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox, etc.

3. On the address bar, please go to http://192.168.1.254 and the page below will appear.

The default login of the router as below. If you have done a configuration on your router and changed your password previously, please use the password you have previously set.

Username: administrator

Password: Router S/N (Available on the sticker at the back of the router)

4. Once you have successfully login, the router's web-based setup page will appear.

5. From the left menu, select WIRELESS to access the screen below.

6. You may change the Network Name (SSID) and the Password to follow your preferences, then scroll to bottom and click "Apply" for the changes to take place.

7. A warning box will popup, click "OK" for the changes to take place and reconnect to the new wireless name with the new password once completed.

8. Please wait until the connection reestablish.

No. Disney+ is not available on Astro Smart TV or Astro GO apps.

You can access Disney+ via:

a. Astro Ultra and Ulti Box by clicking on the Disney+ app under the Apps rail on your Home page.

b. Personal devices (e.g. mobile phones, tablets and Smart TVs) by downloading the Disney+ app or visiting the Disney+ website.

Yes. All TVBAnywhere+ add-on plans; VOD Zone, Channel Zone, and Premium allow streaming on up to 2 devices concurrently. This means you can enjoy your favorite content on two devices at the same time.

No, the Astro Fibre App is available for Astro Fibre customers with the RG21 and RG31 (launching soon) router.

Please ensure you:

a. Have your original identification card “MyKad” (Front & Back) with you (Malaysian).

b. Have your original Passport & Visa with you (Non-Malaysian).

c. Are in a brightly lit environment

Prime Video is available as an add-on to all Astro customers at RM25 per month (tax included). However, Prime Video is available to the following Astro customers at no additional cost:

• Customers on the Ultra/Ulti Box with either the Astro One Epic Pack or Movies Pack as part of their subscription bundle.
• Customers not on the Ultra/Ulti Box but subscribed to either the Astro One Epic Pack or the Movies Pack as part of their subscription bundle, starting 24 June 2025.

STEP 1
Switch off the power for your box and make sure that the adapter's power light is off.

STEP 2
Locate the Smartcard at the front or right side and gently pull it out make sure that the adapter's power light is off.

STEP 3
Wipe the Smartcard's gold chip clean using a dry soft cloth.

STEP 4
Make sure the gold chip is facing upwards and reinsert it all the way in.

STEP 5
Switch on the power for your box and make sure that the adapter's power light is on. Please wait for 5 minutes.

STEP 6
Turn on your box. You should no longer be experiencing this problem.
If issue persist, please submit the issue in our Feedback Form and attach a picture of your General tab of the STB Diagnostics for assistance.

Astro customers can enjoy a special offer of RM13.90/month (RRP RM13.90/month) when they subscribe to WeTV VIP via Astro.