STEP 1

Press any button on your Astro remote.

INDICATOR: LED blinking 3 times / NO LED blink

SOLUTION: Replace new battery

STEP 2

Check if you can change channel using your Astro remote control.

If issue remain after the battery replacement, try changing the channel manually directly from box front panel (If any).

If it's working, you might need to replace your Astro remote.

This might be due to a faulty Astro remote.

You may purchase it directly from Astro Exclusive Partners.

If confirm no issue with remote control, please refer to Decoder Hang at Channel troubleshooting steps here.

Yes, you will need to activate SecureGo again.

As a rule of thumb, this issue might happen when the devices are not equipped with minimum requirement above that supports the subscribed internet speeds:

• WiFi technology
• Network Interface Card (NIC)

As mentioned above however, it is important to note that despite meeting the device minimum requirements, it is not a guarantee that devices connected over WiFi will be able to achieve maximum subscribed internet speeds due to the following:

1. Bad WiFi signal quality and coverage across the area due to:
   • Distance from the RGW/Mesh AP with connected device
   • Obstruction within the house (walls, metallic surfaces)
   • Interference with other household appliances
2. Congested bandwidth
   • If there are too many devices connected to the WiFi network, then the bandwidth might be overloaded with traffic hence, slowing down the speed
3. Devices are connected using WiFi instead of wired using LAN.
   • It is important to note that wired connection offers better reliability and speed over WiFi.
   • WiFi is more prone to interference compared to a wired connection which causes lower speeds and dropped signal.
4. Router Positioning: Most people underestimate the importance of picking a good spot for a Wi-Fi router. Even a small shift in positioning could end up being the difference between day and night:
   • High vs. Low: Put the router as high up as possible to extend the broadcasting range of the radio waves. This also helps clear the router of possible interferences.
   • Concrete & Metals: Make sure your router isn’t blocked by any other objects, especially devices that are electronic. Also, avoid placing your router in your basement as this area is usually enclosed by a lot of concrete, which can be almost impossible for Wi-Fi signals to penetrate.
   • Distance to Router: The further away from your router you get, the weaker the Wi-Fi signal. Therefore, the best option is to place your router as close to your devices as possible, but this is only practical if you have one main area where you tend to use your devices. Otherwise, you should place your router near the center of your home. After all, Wi-Fi broadcasts in 360 degrees, so it doesn’t make sense to put it at one end of the house.
5. Usage
   • More likely, however, is that the people on your network such as friends, roommates, or family members are participating in bandwidth-heavy activities like gaming and streaming Ultrabox/Netflix.
   • Fortunately, if this is the case, you can prioritize your own network traffic by enabling Quality of Service in your router settings.
   • If the problem persists, please run a Ping Test/Traceroute Test and attach the picture or screenshot of both test results in the Feedback Form below, in order for us to provide further assistances. Please make sure to attach the required screenshot(s) in ONE file (i.e. Microsoft Word document, PDF, Image file) before submitting the form.

Note:
Astro and its service providers will not offer any guarantees for compatibility of the customer's equipment (e.g., Personal Computer, Notebook, printers) nor provide on site troubleshooting for WiFi service issues related to the customer's equipment.

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Settings.

STEP 3

Navigate to Video Resolution and press “OK”.

STEP 4

Navigate to your preferred selection and press “OK”.

Recommended to select Auto.

STEP 5

Navigate to Save and press "OK" to confirm your selection if able to read the text properly.

Otherwise, navigate to Cancel to revert to previous settings.

Selected HBO Max content is limited to selected countries due to content rights restrictions. Hence you may not be able to view them in Malaysia.

Please be sure to take your decoder, satellite dish, smartcard, remote control and all other fixtures after dismantling is done by the technician.

For Astro Ultra Box or Ulti Boxes, you will be able to see an itemised charge called "Box Fee” in your Astro bill.

By changing from a 12-months commitment period to 24-months, there will not be any cancellation fee applicable. You will start a new contract with 24-months commitment and receive the corresponding discount for that duration.

Most Astro customers are eligible to use the app, web, Ultra and Ulti boxes. You will only need to login with your Astro ID. Do note that your Astro ID must be linked to your Astro account to use the service. Click "Create now!' on the login page and you will be guided to create an Astro ID if you do not have one.

Download My Astro app or visit the My Astro website.

1. Open/Download the My Astro app or visit My Astro web.

2. Login with your Astro ID.

3. Go to Account.

4. Select 'Profile'.

5. Under Addresses, tap on the edit icon.

6. Select 'Approve' to update service address.

7. Select the Residential type and key-in the postcode, Tap 'Check'.

8. Key-in the Street, House number and Area.

9. Proceed wil below:
- Select 'Yes, I require installation services'.
- Key-in your mobile number.
- Choose 'I agree that relocation fee may be applicable'.
- Tap 'Proceed'.

10. Tap 'Confirm'.

11. A notification will be displayed after ticket created.

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Settings.

STEP 3

Navigate to HDMI Audio and press "OK".

STEP 4

Navigate to your preferred selection and press “OK”.

There several possible reasons for a faulty SIM card. You may visit Astro's Help & Support page and scroll to 2. Technical Troubleshooting - Ultra Box / Ulti Box to find the scenario that best matches your situation. Then follow the troubleshooting steps provided.

Step 1: Launch Prime Video from application rail (under HOME page)

Step 2: Once redirected to the Prime Video app, Click the “Sign-in” button to proceed.

Step 3: Pair your Ultra Box/Ulti Box by scanning the QR Code.

Step 4: Sign-in using Prime Video account. If you have forgot your Prime Video username, sign in using Astro registered email or you can recover your Prime Video subscription here.

Step 5: After sign-in, choose your profile to proceed.

Step 6: Enjoy watching the content!

Not to worry, you will only need to verify your Astro ID once. After that, you may log in to your account as usual.

We would need you to run few tests in order for us to understand your issue and to assist you in fixing the problem.

This will not take longer than 15 minutes.

1. Please run each of the test using your laptop or personal desktop by connecting to your Astro Fibre.
2. Please list down the impacted website (Provide us the complete URL i.e. www.astro.com.my).
3. We need you to run below tests and compile the pictures or screenshots of your test results into one file (i.e Microsof Word document, PDF file) and send to our agent in order for us to assist you further:
   • Run the Ping & Traceroute Test - For guidance, please click here for Ping & Traceroute Test guideline.
   • You may run this by connecting via WiFi or LAN cable. Your test result will appears as per below screen and take a screenshot.

Ping Test Result

Traceroute Test Result

• Run the Speed Test - For guidance, please click here for Speed Test guideline.

We need you to run the Speed Test using both WiFi connection and LAN cable.

Speed Test Result

4. Once you've gathered all the results, attach in Feedback Form for further assistance.

Quick Info
A Speed Test is a service that provides free analysis of Internet access parameters, such as connection data rate.
A Ping Test shows how long it takes for packets to reach host.
A Traceroute Test traces the route of packets to destination host from our server.

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Settings.

STEP 3

Navigate to Subtitles and press "OK".

STEP 4

Navigate to your preferred selection and press "OK".

STEP 1    

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2  

Navigate to Settings.

STEP 3    

Navigate to Parental Control and press "OK".

STEP 4    

Please enter your PIN (Default PIN is 0000).

STEP 5    

Navigate to your preferred category to block and press "OK".

By changing from a higher contract duration e.g., 24-months commitment period to lower contract duration e.g., 12-months, a proration of the cancellation fee will be applicable whereby you will be charged per contract's month balance against the maximum cancellation fee agreed upon during sign up for the offer.

A proration of the cancellation fee will be applicable whereby you will be charged per contract's month balance against the maximum cancellation fee agreed upon during sign up for the offer.

You will start a new contract with 12-months commitment and receive the corresponding discount for that duration.

Check out how a cancellation fee is calculated with examples via this link:

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Settings.

STEP 3

Navigate to Network Settings and press "OK".

STEP 4

Navigate to Network Diagnostics and press "OK".

STEP 5

Network Diagnostics screen will be displayed accordingly.

The 2 months of access will expire exactly two months after your account is activated. For example:

• If you activate on 24 April 2025, your access will expire on 23 June 2025.
• If you activate on 10 May 2025, your access will expire on 9 July 2025.
• If you activate on 23 June 2025, your access will expire on 22 August 2025.

If you cancel your Astro X3 subscription mid-month while still under contract, the termination will take effect at the end of your current billing cycle. Your service will remain active until then, and no partial or prorated refund will be provided. And early termination fee charges may still apply.

However, refunds may be applicable if there is an excess credit balance in your account, such as an overpayment or duplicate payment. Any eligible refund will be processed in accordance with Astro's refund policy.

A stable internet connection is required to ensure your transactions are smooth using SecureGo.

Your Astro Rewards tier is based on how long you've continuously been an Active Astro Pay TV customer:

• Magenta: 0 - 2 years
• Silver: >2 - 9 years
• Gold: >9 - 15 years
• Diamond: >15+ years

The rewards you will receive depends on which tier you're in. Rewards are cumulative: If you're in Diamond tier, you will be able to enjoy all the benefits from Magenta, Silver, and Gold tiers.

You can check the tier you are entitled to via the My Astro app. Here's how:

1. Download the My Astro app
2. Login using your Astro ID
3. Go to Rewards
4. You can see your tier at the top of the page. Tap on it to see more info

If you cancel your Astro Pay TV services but resubscribe at a later date, your duration (year) with us will reset to zero and restart according to your new activation date. Your Astro Rewards tier will reset to Magenta.

For customers with the Ultra or Ulti Box, you will be charged a fee of RM100 (not inclusive of Govt. tax) upon confirmation of lost Astro Box and Smart Card/SIM Card.

For lost Smart Card/SIM card only, you may be charged RM50 to obtain a replacement.

Ensure that your push notification is enabled for My Astro app for a smooth transaction authorisation process or follow these steps if you still don't receive the alerts: 

Launch the My Astro app, tap the gear icon on top right of the screen to go to Manage. Under Settings, tap on SecureGo.

Tap on Authorisation and you will be able to see pending transaction details .

You may check your bills and outstanding via My Astro web or My Astro app via this link.

Note: Bill statements and payment history are not available on WhatsApp. For a more complete billing experience, including access to your payment history, download and use the My Astro app.

You will be able to watch the same video on demand content on your Ultra/Ulti Box as the ZEE5 mobile app or website. However, ZEE5 live channels are currently not available on the Ultra/Ulti Box. Please stay tuned for updates!

You will be able to enjoy your Viu Premium membership immediately upon purchase/choosing it
under your Asian Favourites bundle option. For further clarification, feel free to reach out to us
via WhatsApp by typing “Hi” at 03-9543 3838.

Please make sure that:

1. You are logging in with the correct registered Astro ID (email or phone number) and password. If you can’t remember your password, please proceed to use the “forget password” function.
2. You have an Astro ID that is linked to an Astro account. (note: NJOI – linked users will not be able to log into Astro GO)
3. Your Astro account is active and not under suspension.

If the above points have been met, you may try some quick solutions below:

1. Clear the cache on your browser or app.
2. Check if you have the latest version of the browser or app.
3. Log out and log back into the browser or app.
4. Relaunch the browser or app.
5. Restart your mobile device.
6. Restart your internet connection.

If you're getting the following error on your PVR box when trying to access On Demand (VOD) feature:
- Network interruption, please try again later. If problem persists, please WhatsApp HELP to 03- 9543 3838.
(Code: V6A / V63 / V65)
- Unable to load the On Demand Catalogue due to failure in resolving server's DNS address. Please check your internet connection and try again later. (V6B)

This error message appears because you're trying to access a service that has been discontinued.
Please be informed that Video on Demand (VOD) services has been discontinued on Astro PVR boxes starting 31 December 2025, 12:01 AM. This is part of our ongoing efforts to enhance customer's viewing experience as PVR boxes are no longer able to support the advanced features and viewing quality available on our newer boxes due to technology limitations.

To continue enjoying Video on Demand (VOD) content on Astro set-top-boxes, you must upgrade your PVR box to an Ultra or Ulti Box. This upgrade is available at no additional cost for PVR box users, and it gives you access to the latest features and an improved viewing experience. Alternatively, if you don't want to upgrade your PVR box, you can continue to access On Demand content anytime via Astro GO, which is available at no additional cost to all Astro customers.

All other regular PVR features including the recording feature will remain available.

To find out more on this upgrade offer, contact Astro customer service at 03-95433838.

No, you will not be able to watch beIN SPORTS CONNECT content outside of Malaysia as the app is geo-blocked for each country.

STEP 1

Switch off the power for your box and make sure that the adapter's power light is off.

STEP 2

Locate the SIM card at the left side and gently pull it out.

STEP 3

Wipe the SIM card's gold chip clean using a dry soft cloth.

STEP 4

Make sure the gold chip is facing down and reinsert it all the way in.

STEP 5

Switch on the power for your box and make sure that the adapter's power light is on.

Please wait for 5 minutes.

STEP 6

Turn on your box. You should no longer be experiencing this problem.

If issue persist, please submit the issue on our Feedback Form with the error details and provide sim card number for assistance.

Here's how you can manage your Astro packs on My Astro:

1. Open/Download the My Astro app or visit My Astro web
2. Login with your Astro ID
3. Go to Account
4. Select Subscription or TV Pack
5. Click on your pack
6. You can now browse the available Astro packs

🔄 Want to manage your Astro subscription easily?

📱 Download the My Astro app to:
- Manage your pack subscriptions
- Get add-ons in just minutes
- Get details about your contract

1. Open/Download the My Astro app or visit My Astro web.

2. Login with your Astro ID.

3. Go to Account.

4. Under Billing, tap on Auto Debit.

5. Select 'Update expiry date'.

6. Key-in the expiry dates, then tap 'Save'.

7. A successful notification will be displayed.

Starting 7 October 2026, Disney+ will transition to a new Disney+ app experience. Astro customers can continue enjoying Disney+ via Astro with no changes to their Disney+ subscription or monthly fee.

Customers who stream via Astro Ultra or Ulti Box will have the new app made available automatically, while customers who stream on personal devices will simply need to download the new Disney+ app to continue watching Disney+.

Existing customers can sign in using the same email address or mobile number associated with their existing Disney+ account.

For further information and support relating to the Disney+ app experience or app-related features, please visit the Disney+ Help Centre.

If you receive the "Device Was Not Found" error message, it may be because your device has been automatically removed due to concurrent streaming limits being exceeded.
Please perform the following checks and troubleshooting steps:

1. Stop streaming on one of the other devices currently using your Astro account.
2. Close the Astro Go app on any unused devices.
3. Return to your Smart TV and try streaming again.

If you are unable to remove a device or continue to see the error message, proceed to submit report via WhatsApp or Feedback Form and provide:

• Astro ID use
• Smart TV model
• OS version
• Error reported on device

This will help our support team investigate and assist you further.

You can enjoy the Sun NXT app via Ultra or Ulti Box by following these steps:

1. Launch the Sun NXT app icon on your Ultra and Ulti box
2. Click on “Log in” button via top menu in Sun NXT app
3. Follow the instructions displayed on your TV screen

Please ensure that you have subscribed to the mentioned channel.
If you're subscribed to this channel, follow below steps.

STEP 1
You need to refresh the signal on your box.
Refer to Refresh signal of your box guide.

STEP 2
If issue persist after 30 minutes, proceed to submit report via WhatsApp or Feedback Form.

Once the e-invoicing is activated, you cannot change your bill delivery method. If you do, your e-invoice will be automatically deactivated.

You will be able to view your new package(s) within 24 hours of subscribing. Please note that if you are an Astro customer subscribing to HD channels, you will have to connect an HDMI cable to your TV before you will be able to enjoy the channels.

Prime Video is Amazon’s over-the-top (OTT) streaming and rental service that offers access to a wide range of content including, exclusive Amazon originals, blockbuster movies and hit shows.

Due to copyright restrictions, certain shows may not be available for live streaming. However, many shows become available for on-demand streaming shortly after their original airing. The availability and timing can vary depending on the specific show, streaming service, and licensing agreements in place.

If you have a box that is not an Ultibox or Ultrabox, please recycle your box at a registered collection centre that will properly manage the boxes in an environmentally friendly way. Click here to find a registered collection centre near you.

For your old Ultibox or Ultrabox, once your Plug & Play Box has been activated, a courier service will reach out to you within TWO (2) weeks for a time for them to pick up the old Astro box and SIM card/Smartcard.

1. Ensure that all cables have been plugged out of the old Astro box. To remove the white satellite cable from your old Astro box, simply hold the cable, twist, and gently pull.
2. Set aside these items to be ready for our delivery partner to pick up from you

- Old Astro Box
- Old Astro Smartcard/SIM Card (leave this in your Astro Box)

1. When a courier arrives at your residence, do confirm that they are collecting items on behalf of Astro.
2. Allow the courier to check the serial number of the Astro box.
3. Hand them all the items for return, and you're done!

For any NJOI-related information, please visit the NJOI Help & Support page at

https://purchase.njoi.com.my/en-support

STEP 1

Switch off the power for your box and make sure that the adapter's power light is off.

STEP 2

Locate the SIM card at the left side and gently pull it out.

STEP 3

Wipe the SIM card's gold chip clean using a dry soft cloth.

STEP 4

Make sure the gold chip is facing down and reinsert it all the way in.

STEP 5

Switch on the power for your box and make sure that the adapter's power light is on.

Please wait for 5 minutes.

STEP 6

Turn on your Ultra Box. You should no longer be experiencing this problem.

If issue persist, please submit the issue in our Feedback Form with the error details and provide sim card number for assistance.

No, the eKYC verification process must be done by the individual themselves, using their MyKad and selfie in real-time.

Yes, you can check the status of your application through the My Astro website or app.

You will receive an email within 45 minutes of payment made to let you know whether your advance payment is successful or not. If your payment has failed, you may call Astro's Contact Centre at 03-9543 3838 or wait for an Astro representative to be in contact with you within 2 working days to assist you with your order.

Not to worry, our representative will be contacting you within 24 hours.

Watch this video or follow below steps to fix broadband no service - Astro Fibre

You need to identify your modem type by looking at the modem light indicator before proceeding with troubleshooting.

The type of modem is indicated as per below:

MODEM INDICATOR 1

MODEM INDICATOR 2




MODEM INDICATOR 3



BTS 1

1. Please power off your modem and router. (This is to refresh your modem and router performance)
2. Make sure the fibre cable from your wall socket to modem is securely connected.

3. Please ensure the LAN cable is securely connected from router to your devices (Astro Box/Laptop etc.)

Modem connection



Router connection



4. Now, power on modem and router, wait for 2 minutes to stabilise the devices after reboot. Your internet services should be restored.

5. If issue persists, please connect to our agent and attach your modem light indicator picture for further assistance.



BTS 2

1. Please power off your modem and router.
(This is to refresh your modem and router performance)

2. Make sure the fibre cable from your wall socket to modem is securely connected.

3. Please ensure both LAN cables on the Modem (LAN Port 2) and Router (Port 1) are properly connected.


Modem connection



Router connection


4. Power on your modem and router, wait for 2 minutes to stabilise the devices after reboot. Your internet services should be restored.

5. If issue persists, please connect to our agent and attach your modem light indicator picture for further assistance.



BTS 3

1. Please ensure your modem and router power plugs are securely connected to the power socket.

2. Alternatively, try to connect the power plug to a different power socket or power source. This step is to eliminate the possibility of faulty power socket which could cause the issue.

3. If issue persists, please connect to our agent for further assistance.