No. The Sun NXT app subscription is currently only accessible within Malaysia.

Astro invests billions of ringgits in content annually to keep Malaysians entertained and informed. Hence, we work alongside industry players, content partners and regulators in protecting intellectual property so that Astro can continue to produce and aggregate compelling content for our viewers.

We continue to educate and raise awareness among the public and businesses about the economic and social losses caused by content piracy. You can play your part in combating piracy by reporting potential copyright infringement of Astro content to the Domestic Trade and Consumer Affairs Ministry (KPDNHEP) on the following channels:

• 1-800-886-800 (hotline)
• 03-8882 6088 (Enforcement Command Centre)
• +6019-279 4317 (WhatsApp)

The "coming soon" label on some streaming apps on your TV and the "Apps" page of Astro's website allows our customers to stay on top of new launches as they happen! Stay tuned for these upcoming streaming apps so you can access even more content that you love from across the world.

1. Please standby computer/laptop to access to the internet and connection must be via LAN (cable) [Connect the LAN (cable) to the yellow port in Maxis Router and direct to computer/laptop].

2. You may open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox and etc.

3. On the address bar, please go to http://192.168.1.254 and below page will appear.

If below box appear, please enter required details:

USERNAME: Administrator

PASSWORD: (ACCESS KEY AT THE RGW STICKER)

(These are the defaults, if you have done previous configuration on your router the password may be different)

4. Once enter into the page "'TECHNICOLOR TG784N V3'', you may follow below steps to get the best wireless channel information.

A. Select "Home Network".

B. Click "WLAN: SSID" to proceed to next screen.

C. In order to get the best wireless channel, click "Wireless Scan" to scan available surroundings wireless Channel.

D. Please choose channel with lesser number of usage.

Example in below case, you may choose channel 4.

5. To configure wireless channel, please proceed with below steps.

A. Select "Home Network".

B. Click "WLAN: SSID" to proceed to next screen.

C. Then, click "Configure" to change the channel selection (automatic to manual) and other configuration option.

D. Please ensure below items:

i. WLAN Enable: Tick

ii. Interface Enable: Tick

iii. Change the Channel Selection to Manual

iv. Change the wireless Channel based on Step 4(D).

v. Once completed the selection, click the "Apply" button.

If you are an existing iQIYI VIP, you may cancel your existing VIP subscription with iQIYI and signup again via astro.com.my/iqiyi to enjoy the special price by adding your subscription to your Astro bill.

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Settings.

STEP 3

Navigate to Network Settings and press "OK".

STEP 4

Navigate to Network Diagnostics and press "OK".

STEP 5

Network Diagnostics screen will be displayed accordingly.

No. When you log in to the new Disney+ app using the same email address or mobile number associated with your existing Disney+ subscription, Disney+ will match the subscription linked to your account, so you can continue using your current subscription without duplicate billing.

Yes, you are eligible for the 2-month access. However, you will need to activate and link your amazon account. Please activate and access Amazon Prime as the insturfctions below.

Step 1: Visit https://product.astro.com.my/apps/primevideo and click on "Get or activate Prime Now" and log in using your Astro ID and follow the on-screen steps.

Step 2: Once redirected to the Prime Video app, sign in to your Amazon Prime account using mobile number or email address.

Step 3: Launch Prime Video from application rail on your Ultra Box/Ulti Box by clicking on “Red Button” in your remote.

Step 4: Click on the “Sign in” button.

Step 5: Pair your Ultra Box/Ulti Box by scanning the QR Code.

Step 6: Enter your credentials on either a mobile browser or open the Prime Video app on your mobile device, and then click "Allow".

Step 7: Enjoy!

You can recover your Netflix login here or at astro.com.my/Netflix

Step 1: Head to astro.com.my/Netflix

Step 2: At the FAQ section look for "How to recover my Netflix login email and password

If you have a random Astro power cable, remote control or old box lying around at home, you are required to discard them only at registered collection centres for proper handling and management of e-waste in an environmentally sound manner. Click here to find a registered collection centre near you.

For all recycling-related questions, please click here.

Any Astro GO compatible device (mobile/tablet/PC) and Multiroom Smart TV* compatible TVs will benefit from Astro GO+.

For customers with the Ultra or Ulti Box, please ensure to provide your latest contact details to our Astro agent during the call to terminate your account, this includes your mobile number and house address. If you still need further help, please contact us at 03-9543 3838.

You will be able to view your new package(s) within 24 hours of subscribing. Please note that if you are an Astro customer subscribing to HD channels, you will have to connect an HDMI cable to your TV before you will be able to enjoy the channels.

There are no extra charges as it is a value-added service introduced provided for your convenience.

Yes, you can. On your Account tab, scroll and go to Subscription. Select Delivery status to track your delivery/installation or you may reach out to your installer agent for more assistance.

This feature is available on My Astro web and app version 6.2.5 and above.

Download My Astro app or visit the My Astro website.

No, your subscription will be terminated at the end of your Astro billing date. Until then, you will still be able to access your WeTV VIP account.

Here's how to refresh your smartcard in My Astro:

1. Open/Download the My Astro app or visit My Astro web
2. Login with your Astro ID
3. Go to Account
4. Tap on Subscription or TV pack
5. Tap on Rooms
6. For the box that you would like to refresh the smartcard, tap on 'Refresh' button. This will refresh your Astro box signal

📡 Experiencing technical issues?

📱 Download the My Astro app to:
- Perform self-troubleshoot
- Solve in a few minutes
- No need to call customer service

Please ensure that you are logging in with the correct Astro ID and password. If you cannot remember your password, use the “Forgot Password” option to reset.

If the issue persists, you can submit an enquiry through our feedback form here. Please refer to the steps below:

Step 1: Select Feedback Type: Technical issues
Step 2: Select Issue: I have an enquiry/issue with Apps

Then choose the app you’re having trouble logging into and submit the form.
We will get in touch with you within 48 hours.

Important: To use Astro GO, My Astro, and other partner apps included in your subscription, your Astro ID must be linked to an active Astro subscription. You can refer to the steps here to learn how to link your Astro ID.

You can enjoy Prime Video benefits on Prime Video website and/or mobile app for 2 months once you have activated your Prime Video access anytime between 24 April 2025 – 23 June 2025.

Yes. You can activate your access anytime between 24 April 2025 – 23 June 2025 to get 2 months access to Prime Video at no additional charge.

If you are an Astro subscriber
Step 1: Launch the Astro Smart TV app on your Smart TV.

Step 2: Select “Log In”.

Step 3: Scan the QR code OR visit astro.com.my/tvapp and enter the code on the screen.

Step 4: Enter your Astro ID (registered email or mobile number) and password. If you do not have an Astro ID, click on “Create now”.

Step 5: Once you have successfully logged in, the Astro Smart TV app will refresh automatically, and you will be able to access it.

If you are NOT an Astro subscriber
Step 1: Launch the Astro Smart TV app on your Smart TV.

Step 2: Select “Subscribe Now”.

Step 3: Scan the QR code to visit https://www.astro.com.my/#main and explore Astro’s packs or Multiroom (Smart TV).

Step 4: Once you have successfully subscribed, kindly follow Step 1 – 5 under “If you are an Astro subscriber” to log in.

For any transaction, you will be prompted with a push notification alert to replace SMS OTP. Tap on the push notification to view the secure verification screen, that allows you to "Approve" or "Reject" the transaction within 50 seconds. Rejected transactions will not be processed. If transaction is performed from a different device, the push notification alert will still be sent to your SecureGo registered device for approval.

We would need you to run few tests in order for us to understand your issue and to assist you in fixing the problem.

You may proceed with the troubleshooting steps below which should not require any longer than 15 minutes.

1. Please run each of the tests according to your your Laptop/PC Software.
2. Compile the pictures / screenshots of your test results in one file (i.e Microsof Word document, PDF file) and attach them in the Support Ticket below in order for us to assist you further:
   • List of websites effected.
   • Run the Speed Test via LAN (cable) and Wi-Fi connection - Please click here for Speed Test guideline.
   • Run the Traceroute Test - Please click here for Traceroute Test guideline.
   • Run the Ping Test - Please click here for Ping Test guideline.
3. Once you've gathered all the results, kindly send them all through the Feedback Form below.

Quick Info
A Speedtest is a service that provides free analysis of Internet access parameters, such as connection data rate.

A Ping Test shows how long it takes for packets to reach host.

A Traceroute Test traces the route of packets to destination host from our server.

You can proceed with below troubleshooting if the weather is good. Ortherwise, you may try again later.

STEP 1
On your remote, press the “HOME” button and the home menu will be displayed at the bottom of your screen.

STEP 2
Navigate to SETTINGS and press “OK”.

STEP 3
Navigate to STB DIAGNOSTICS and press “OK”.

STEP 4
Refer to the signal strength % shown on the top left of your screen.
If it is 65% or higher, please go to WhatsApp to receive further help.
If it is below 65%, please go to STEP 5.

STEP 5
Switch off the power for your box and make sure that the adapter’s power light is off.

STEP 6
Unscrew the satellite cable from the box and pull it out.

STEP 7
Plug the satellite cable back into the box and screw it back securely.

STEP 8
Switch on the power for your box and make sure that the adapter’s power light is on.
Please wait for 5 minutes.

STEP 9
Turn on your box. You should no longer be experiencing this issue.
If issue persist, please attach a picture of your General tab of the STB Diagnostics for assistance.

Centralized Dish
If issue persist under a centralised satellite dish, please refer to your respective Building Management before contacting our agents.

From 1st July 2023 onwards, Astro will ONLY accept cheques deposited at Public Bank Berhad.

To simplify your monthly payments, here are some recommended alternatives you can look into.

• Auto-Debit
• Online Banking
• WhatsApp
• JomPAY
• Astro Quick Pay

To find out more on how you can make your payments via these channels, kindly visit here.

Should you choose to continue with cheque payment, do ensure that you follow these steps below.

Step 1: Fill in the cheque

Step 2: Ensure that your 10-digit Astro account number is accurately written at the back of the cheque

Step 3: Go to your nearest Public Bank

Step 4: Locate the Cheque Deposit Machine

Step 5: Select “Bill Payment” on the screen

Step 6: Select “Astro”

Step 7: Drop your cheque in

Step 8: Collect your receipt

As a rule of thumb, this issue might happen when the devices are not equipped with minimum requirement above that supports the subscribed internet speeds:

• WiFi technology
• Network Interface Card (NIC)

As mentioned above however, it is important to note that despite meeting the device minimum requirements, it is not a guarantee that devices connected over WiFi will be able to achieve maximum subscribed internet speeds due to the following:

1. Bad WiFi signal quality and coverage across the area due to:
   • Distance from the RGW/Mesh AP with connected device
   • Obstruction within the house (walls, metallic surfaces)
   • Interference with other household appliances
2. Congested bandwidth
   • If there are too many devices connected to the WiFi network, then the bandwidth might be overloaded with traffic hence, slowing down the speed
3. Devices are connected using WiFi instead of wired using LAN.
   • It is important to note that wired connection offers better reliability and speed over WiFi.
   • WiFi is more prone to interference compared to a wired connection which causes lower speeds and dropped signal.
4. Router Positioning: Most people underestimate the importance of picking a good spot for a Wi-Fi router. Even a small shift in positioning could end up being the difference between day and night:
   • High vs. Low: Put the router as high up as possible to extend the broadcasting range of the radio waves. This also helps clear the router of possible interferences.
   • Concrete & Metals: Make sure your router isn’t blocked by any other objects, especially devices that are electronic. Also, avoid placing your router in your basement as this area is usually enclosed by a lot of concrete, which can be almost impossible for Wi-Fi signals to penetrate.
   • Distance to Router: The further away from your router you get, the weaker the Wi-Fi signal. Therefore, the best option is to place your router as close to your devices as possible, but this is only practical if you have one main area where you tend to use your devices. Otherwise, you should place your router near the center of your home. After all, Wi-Fi broadcasts in 360 degrees, so it doesn’t make sense to put it at one end of the house.
5. Usage
   • More likely, however, is that the people on your network such as friends, roommates, or family members are participating in bandwidth-heavy activities like gaming and streaming Ultrabox/Netflix.
   • Fortunately, if this is the case, you can prioritize your own network traffic by enabling Quality of Service in your router settings.
   • If the problem persists, please run a Ping Test/Traceroute Test and attach the picture or screenshot of both test results in the Feedback Form below, in order for us to provide further assistances. Please make sure to attach the required screenshot(s) in ONE file (i.e. Microsoft Word document, PDF, Image file) before submitting the form.

Note:
Astro and its service providers will not offer any guarantees for compatibility of the customer's equipment (e.g., Personal Computer, Notebook, printers) nor provide on site troubleshooting for WiFi service issues related to the customer's equipment.

Yes. You may subscribe to Disney+ through Astro even if you already have an existing Disney+-billed subscription.

a. If you subscribe to the same or higher Disney+ plan through Astro and activate it using the same login credentials (i.e. email address or mobile number and password) associated with your existing Disney+-billed subscription, your existing Disney+-billed subscription will be automatically paused by Disney+ for as long as your Astro-billed Disney+ subscription remains active.

For example:

• Disney+ Standard (Disney-billed) → Disney+ Standard (Astro-billed)
• Disney+ Standard (Disney-billed) → Disney+ Premium (Astro-billed)
• Disney+ Premium (Disney-billed) → Disney+ Premium (Astro-billed)

b. If you subscribe to a lower Disney+ plan through Astro, your existing Disney+-billed subscription will remain active and your Astro-billed Disney+ subscription will be treated as an additional subscription. In this situation, you may end up with more than one Disney+ subscription.

For example:

• Disney+ Premium (Disney-billed) → Disney+ Standard (Astro-billed)

If you wish to make changes to or cancel your existing Disney+-billed subscription, you will need to contact Disney+ directly.

You will continue to have access to Disney+ until the end of your current subscription cycle. After that, you will no longer be able to access Disney+ through Astro.

STEP 1

Switch off the power for your box and make sure that the adapter's power light is off.

STEP 2

Locate the SIM card at the left side and gently pull it out.

STEP 3

Wipe the SIM card's gold chip clean using a dry soft cloth.

STEP 4

Make sure the gold chip is facing down and reinsert it all the way in.

STEP 5

Switch on the power for your box and make sure that the adapter's power light is on.

Please wait for 5 minutes.

STEP 6

Turn on your box. You should no longer be experiencing this problem.

If issue persist, please submit the issue on our Feedback Form with the error details and provide sim card number for assistance.

Yes, if you’re a non-Malaysian living or working in Malaysia, your Astro Broadband Bundle/Astro Fibre Bundle are subject to the 6% Service Tax effective bill date 9th July 2024 onwards.

For Residential Astro Pay TV customers: You may change your contract from e.g., 12-month to 24-month without incurring a switching fee or cancellation fee. However, if you change your contract from e.g., 24-month to 12-month, will be charged a cancellation fee accordingly if still within minimum term (contract) period. No switching fee applicable.

Yes. To change the language, go to the app’s side menu, then go to Settings and select the preferred interface language.

Astro Quick Pay is a convenient method to check your Bill Summary, Account Status and pay Astro bills at your convenience with immediate payment posting, right from home.

However, you can only pay your latest bill via Astro Quick Pay.

If you want to view all your payment history, download bill statements, and pay easily all in one place, you can download the My Astro app.

To enjoy full premium access, simply add RM10 to upgrade your Sun NXT Lite subscription to
Sun NXT Premium.

Please disregard the reminder if payment had been made and do check if you have any outstanding balance on Astro Quick Pay.

Kindly note that affected customers will be adequately informed 30 days prior to the implementation via SMS which are sent out in phases (Starting 1 July), with scheduled announcements across WhatsApp, My Astro app, and Astro website.

Please submit the feedback form and ensure the required document is attached for our review.

ZEE5 is an Indian subscription video on demand and over-the-top streaming service run by Zee Entertainment Enterprises. With the app, subscribers can enjoy over 170,000 hours of on demand content from originals, movies, TV shows, music and more across 18 languages including English, Tamil, Hindi and Punjabi – all in a single destination.

You can proceed with below BTS if the weather is good. Otherwise, you may try again later.

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to SETTINGS.

STEP 3

Navigate to Satellite Settings and press “OK”.

STEP 4

Navigate to Diagnostics and press “OK”.

STEP 5

Refer to the signal strength on your screen.

If it is 65 or higher, please take the screenshot and submit your feedback form.

If it is below 65, please go to Step 6.

STEP 6

Switch off the power for your box and make sure that the adapter’s power light is off.

STEP 7

Unscrew the satellite cable from the box and pull it out.

STEP 8

Plug the satellite cable back into the box and screw it back securely.

STEP 9

Switch on the power for your box and make sure that the adapter’s power light is on. Please wait for 5 minutes.

STEP 10

Turn on your box. You should no longer be experiencing this issue.

If issue persist, please submit the issue on our Feedback Form with error details and attach a picture of your General tab of the STB Diagnostics for assistance.

Centralized Dish

If issue persist under a centralized satellite dish, please refer to your respective Building Management before contacting our agents.

For any unreturned equipment, penalty fee will be charged as below:

• Astro Box – RM100
• Router – RM200 (For Astro Fibre only)
• Mesh – RM200 each (For Astro Fibre only)

If your Astro box displays an error message on your TV that says:
- Unable to Play Video (HDCP Failed)
- Your HDMI configuration is preventing the video from being displayed. Please ensure that your HDMI cable is connected to HDCP-capable TV. Please check with your TV manufacturer or qualified technician if your problem persists. (HDCP 2)
- The selected HDMI port on your TV does not support HDCP version required for programme playback. Please check with your TV manufacturer or qualified technician if your problem persists.
HDCP 2.2 support required for 4K UHD and HDCP 1.4 for others (CDE:2)

Error code: HDCP 0, HDCP 1, HDCP 2, CDE:2

Note: To view 4K UHD content on your Ultra Box, your 4K TV must be HDCP 2.2 compliant. If you are using a non-4K TV, it is likely not HDCP 2.2 compliant.

If you are certain your TV is HDCP compliant and the error persists, try the troubleshooting steps below:

STEP 1
Switch off the power of your box and make sure that the adapter’s power light is off.

STEP 2
Unplug the HDMI cable from your TV and plug it back in securely to other available HDMI port.

STEP 3
Switch on the power for your box and make sure that the adapter’s power light is on.
Please wait for 5 minutes.

STEP 4
Turn on your box. Do select the correct TV input.
You should no longer be experiencing this problem.

If you would like more information or to provide feedback on Astro Rewards, kindly reach out to us at 03 9543 3838 or visit one of our Astro service centres.

You can subscribe to Multiroom (Smart TV) through any of the following channels:

a) Online via the Multiroom page
b) WhatsApp “Smart TV” or call 03-9543 3838
c) Astro Stores

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Settings.

STEP 3

Navigate to TV Settings and press “OK”.

STEP 4

Navigate to your preferred selection and press “OK”.

STEP 5

Navigate to Save and press "OK" to confirm your selection.

If you're still having trouble activating your Prime Video subscription, please reach out to Astro Customer Service for help:

1. Sending a WhatsApp message with "Hi" to 03-9543 3838 for assistance.
2. www.astro.com.my/contactus/form

Starting 29th April 2025 onwards, the Sun NXT app will be available on the Ultra/Ulti Box for all Astro customers to enjoy on the big screen, web app or/and mobile app.

After order submission, the Plug & Play Box and Astro SIM card will be couriered separately to your service address. The delivery dates with the tracking numbers will be communicated via SMS.

The Plug & Play Box and Astro SIM card should arrive within 3-working days after your order submission. You may self-install your box by following the guide here.

If you are unable to log in to the Astro Smart TV app, please follow the steps below:

1. Verify Your Astro ID Credentials

• Ensure you are using the correct Astro ID (email address/mobile number) and password.
• If you have forgotten your password, reset it via the Astro login page.

2. Check Your Internet Connection

• Ensure your Smart TV is connected to the internet.
• Test your internet connection by opening another app on the TV.
• Restart your router and Smart TV if necessary.

3. Update the Astro App and TV Software

• Make sure the Astro app is updated to the latest version.
• Check that your Smart TV firmware/software is up to date.

4. Restart the App

• Close the Astro app completely.
• Reopen the app and try signing in again.

5. Reinstall the Astro App

• Uninstall the Astro app from your Smart TV.
• Download and install it again from your TV's app store.
• Attempt to log in once more.

If you are still unable to log in, proceed to submit report via WhatsApp or Feedback Form and provide:

• Smart TV brand and model
• Screenshot/photo of the error message
• Astro ID (email address used for login)
• Details of the troubleshooting steps already performed

This information will help the support team investigate and resolve the issue more quickly.

Please check your internet speed and connection status. If your internet is working without any issues, please logout & login into the app again.

If you are still having issues, proceed to submit report via WhatsApp or Feedback Form.

You may login to your My Astro App and go to Account then click on Subscription followed by Add-ons, below is the step-by-step guide. Here, under the Apps category, you will be able to see all the apps that are included in your current subscription plan. If you’re unable to find Prime Video, click on ‘Manage your add-ons' to add-on the app to your pack at RM25/month (tax included).

Step 1: Press on Account

Step 2: Press on Subscription

Step 3: Press on Add-ons

Step 4: Check on the Subscription list