1. Open/Download the My Astro app or visit My Astro web.

2. Login with your Astro ID.

3. Go to Manage Subscription.

4. Tap on Fibre plan.

5. Select your preferred speed and tap 'Proceed'.

6. Review order, select agreed and tap on 'Confirm order'.

7. Select 'Approve' to upgrade speed.

8. A confirmation order will be displayed.

Watch this video or follow below steps to Improve Slow WiFi Connection for Astro Fibre

Slow browsing using LAN cable

Looks like there is something wrong with your service connection.

Please run the Speed Test and attach the picture or screenshot of the speed test in the Feedback Form below, in order for us to provide further assistances.

Click here for Speed Test guideline.

Quick Info

A Speedtest is a service that provides free analysis of Internet access parameters, such as connection data rate.

Slow browsing using Wi-Fi

1. Router Positioning

Most people underestimate the importance of picking a good spot for a Wi-Fi router. Even a small shift in positioning could end up being the difference between day and night.

i) High vs. Low

Put the router as high up as possible to extend the broadcasting range of the radio waves. This also helps clear the router of possible interferences.

ii) Concrete & Metals

Make sure your router isn't blocked by any other objects, especially devices that are electronic. Also, avoid placing your router in your basement as this area is usually enclosed by a lot of concrete, which can be almost impossible for Wi-Fi signals to penetrate.

iii) Distance to Router

The further away from your router you get, the weaker the Wi-Fi signal. Therefore, the best option is to place your router as close to your devices as possible, but this is only practical if you have one main area where you tend to use your devices.

Otherwise, you should place your router near the center of your home. After all, Wi-Fi broadcasts in 360 degrees, so it doesn't make sense to put it at one end of the house.

2. Wireless Interference & Noise

You've probably never noticed but there are wireless signals all around you wherever you go and they're passing through you all the time. From where? Electronic devices, Wi-Fi routers, satellites, cell towers, and more.

Although Wi-Fi is supposed to be on a different frequency than most of these devices, the amount of radio noise can still cause interference. Some common causes of interference include:

i) Microwaves

ii) Bluetooth Devices

iii) Cordless Phone

3. Surrounding Wi-Fi signals

A truth of the modern world is that every household has their own Wi-Fi network, which can cause issues with channel overlap. This can be somewhat problematic in a townhouse, but is especially problematic in housing complexes and apartments where there can be many routers within close proximity.

Which is why it's important that you pick a good channel in your router settings. Modern routers can choose channels for you automatically, but sometimes it's better to investigate and find the best channel yourself.

4. Usage

More likely, however, is that the people on your network such as friends, roommates, or family members are participating in bandwidth-heavy activities like gaming and streaming Ultrabox/ Netflix.

Fortunately, if this is the case, you can prioritize your own network traffic by enabling Quality of Service in your router settings.

If the problem persists, please run a Ping Test, Traceroute Test and attach the picture or screenshot of both test results in the Feedback Form below, in order for us to provide further assistances.

Please make sure to attach the required screenshot(s) in ONE file (i.e. Microsoft Word document, PDF, Image file) before submitting the form.


Quick Info
A Speedtest is a service that provides free analysis of Internet access parameters, such as connection data rate.
A Ping Test shows how long it takes for packets to reach host.
A Traceroute Test traces the route of packets to destination host from our server.

If you see this message, it means your Astro account has reached the maximum number of devices allowed for registration.
Please perform the following checks and troubleshooting steps:

1. Manage Your Registered Devices

• Go to www.astrogo.com.my or open the Astro GO app.
• Log in using your Astro ID and password.
• Review the list of registered devices.
• Remove a device that you no longer use.
• Return to your new device and try signing in again.

If you are unable to remove a device or continue to see the error message, proceed to submit report via WhatsApp or Feedback Form and provide:

• Astro ID use
• Smart TV model
• OS version
• Error reported on device

This will help our support team investigate and assist you further.

Note: Please be aware that only one Smart TV device is allowed per account at any point in time.

There are two ways for you to switch your preferred bill delivery method:

A. Customers can manage their account via the My Astro Portal by following these easy steps:

1. Visit www.astro.com.my
2. Select “My Account”, then select “Manage Account”
3. Log in to My Astro Web using your Astro ID
4. Select “Account”
5. Under “Billing”, click on “Bill Delivery Method”
6. Choose your preferred bill delivery method, then click “Proceed”

B. Customers can also manage their account via Astro’s mobile application, the My Astro app by following these easy steps:

1. Open the “My Astro” app on your smartphone. If you do not have it installed, you may download it here (Google Play Store) or here (IOS App Store)
2. Log in with your Astro ID
3. Select “Account” in the navigation bar
4. Select “Bill Delivery Method”
5. Choose your preferred bill delivery method, then click "Proceed

You may report the incident on WhatsApp at 03-9543 3838 by typing PNP and our access our user guide or request for further help from our dedicated agents. Please have your Airway Bill tracking numbers ready for validation.If a replacement box/Astro SIM card is deemed necessary, a new Box and a new Astro SIM card will be couriered to your service address.

STEP 1

On your remote, press the HOME button.

STEP 2

Navigate to Update Satellite Frequency and press “OK”.

STEP 3

Choose Test Satellite Frequency and press “OK”.

STEP 4

Select Yes, continue and press "OK" to start the test.

Otherwise, select No, go back to cancel.

STEP 5

Satellite Frequency Test progress screen will be displayed.

STEP 6

The test result will be displayed once completed.

Press "OK" to go back to channel.

You should have received an email or SMS with your activation details, please click on the link provided to be redirected to the Netflix website to activate your account.

Alternatively, you can also activate Netflix on your Ultra/Ulti Box. Please surf to CH 741 on your Ultra/Ulti Box (or click the Netflix button on your Astro remote) and follow the instructions on the screen.

You may utilise your credit balance to offset future billing on your Astro account, or contact us here for further enquiries.

There will be no changes to your billing cycle.

Yes, the current service tax law does not exempt services provided to customers residing in Labuan, Langkawi, and Tioman.

You can record your favourite shows, save them to the cloud storage and watch it across any of your devices (Astro Box, Astro GO devices, Multiroom Smart TV).

No, you can only stream the beIN SPORTS CONNECT app on one device at a time.

Multiroom (Astro Box) requires an Astro box to be set up and can be accessed through the regular satellite feed or streaming on home Wi-Fi. Meanwhile, the Multiroom (Smart TV) only requires a Smart TV and no installation is needed. Customers can download the Astro Smart TV app on the Smart TV to stream.

No, the courier charges are borne by Astro for the retrieval of the box and Smart Card/SIM Card.

There will be two attempts made to retrieve the box and you are required to be available at the agreed upon time.

Starting from 24 January 2025, Astro One Pack customers can add on Netflix ala-carte (comes with 24 months contract) plan to their subscription. This plan allows customers to choose from three Netflix subscription plans Basic, Standard, and Premium with a 24-month contract. This plan is offered at a discounted rate compared to the regular monthly Netflix add on, providing a cost-effective way to enjoy Netflix content.

Sun NXT app allows you to create a separate kids profile for children below the age of 12. Once you log into the kids’ profile, you will be required to enter a password before you can switch back to the adult profile. All content specific to children will be tagged as 'Kids Content' and only such restricted content will be accessible through the kids’ profile.

You may retain your watch history and settings of your existing Netflix account by using the same email of your Netflix account during the linking of your Netflix account with Astro.

Please refer below to set up your Ultra/Ulti Plug & Play Box.

To connect via LAN cable:

1. Switch off your old Astro box.
2. To connect your Plug& Play Box via LAN cable:
   a) Remove the LAN cable from your old Astro box and connect the LAN cable to your new Plug & Play Box.
   i) For Maxis IPTV customers, keep the other end of the LAN cable connected to your router.
   ii) For TIME IPTV customers, go to the other end of the same LAN cable, plug it out from your modem, and into any LAN port on your router. Ensure that you’re not plugging your LAN cable back into the same box.
   

Note: If you have a two-in-one modem & router, you can skip Step ii).

To connect via Wi-Fi:

Remove your LAN cable from your old Astro box, and do not plug it into your new Plug & Play Box.

No additional subscription is required. Video On Demand (VOD) is a value-added service for all Astro customers with connected Ultra Box and Ulti Box. All you have to do is connect your box to your home Wi-Fi and you'll be able to access the world of on demand. Binge-watch, rewind, fast-froward and stream all your favourite shows anytime.

Astro Quick Pay is a convenient method to check your Bill Summary, Account Status and pay Astro bills at your convenience with immediate payment posting, right from home.

However, you can only pay your latest bill via Astro Quick Pay.

If you want to view all your payment history, download bill statements, and pay easily all in one place, you can download the My Astro app.

No, Astro will cover all expenses related to returning the box.

All Customers on any Bundle which includes Movies Pack, those with the Movies Add‑On, customers subscribed to the HBO Pack Add‑On, as well as customers on the Astro One Epic Pack, will automatically be entitled to the new channels.

STEP 1

On your remote, press the HOME button.

STEP 2

Navigate to SETTINGS icon and press "OK".

STEP 3

Navigate to Manage Satellite Frequency and press “OK”.

STEP 4

Choose Test Satellite Frequency and press “OK”.

STEP 5

Choose "Confirm" to continue Test Satellite Frequency and press “OK”.

STEP 6

Satellite Frequency Test progress screen will be displayed.

STEP 7

The test result will be displayed once completed.

STEP 1

Press "HOME" button on your remote control.

STEP 2

Navigate to Settings and press "OK".

STEP 3

Navigate to Installation Settings and press "OK".

STEP 4

Enter your PIN to access this setting. (Default PIN is 0000).

STEP 5

Navigate to Restore Factory Settings and press "OK".

STEP 6

Navigate to Yes, continue and press "OK" to confirm your selection.

Otherwise, navigate to No, go back to maintain the settings.

STEP 7

Please reboot your box.

STEP 8

New Installation Settings screen will appear.

Click here to follow New Installation Settings guide.

If you have a random Astro power cable, remote control or old box lying around at home, you are required to discard them only at registered collection centres for proper handling and management of e-waste in an environmentally sound manner. Click here to find a registered collection centre near you.

For all recycling-related questions, please click here.

Yes, however, we do advise keeping your subscription while your Smart TV is being fixed to avoid having to download the app again.

Yes, watching on the Astro Smart TV app will utilise one (1) of your Astro Go concurrency.

Call our contact centre 03-9543 3838 or visit us at astro.com.my.

For more information you may visit

https://www.hasil.gov.my/en/e-invoice/

OR call the IRBM help desk line at 03-8682 8000 OR email them at [email protected]

[email protected]

.

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Settings.

STEP 3

Navigate to Audio and press "OK".

STEP 4

Navigate to your preferred selection and press “OK”.

Occasionally, an additional verification step may be required, such as entering a mobile number. This helps ensure a smooth and secure activation experience.

Register for SecureGo via My Astro app v6.2.0 and above, available on the Google Play Store or Apple App Store. 

Launch the My Astro app, tap the gear icon on top right of the screen to go to Manage and tap on SecureGo under Settings. Tap to toggle on SecureGo.

Step 1: Enter your ID number 

Step 2: Verify your identity with WhatsApp OTP sent to your registered mobile number 

Step 3: Set up your device name, and you're good to go! 

For more information about the Astro Fibre App, you may click here for a detailed user guide.

Having trouble with your phone line ?

You may proceed to contact dedicated service provider directly - 1 800 8211 23

Yes, for customers on the Entertainment, Entertainment Plus, Premium 2, Premium 3 or
Platinum Pack, you may remain with your current Asian Favourites selection: Chinese, Indian or
Indonesian. If you would like to add Viu Premium to your bundle, you may do so for only
RM8.40/month (RRP: RM21.90). Please reach out to us via WhatsApp by typing “Hi” at 03-9543
3838 to add Viu Premium to your subscription.

STEP 1

On your remote, press the ... button and the Channel Guide page will be displayed on your screen.

STEP 2

Select the channel you would like to unlock and press "OK".

STEP 3

Select "Unlock Channel" and press "OK".

STEP 4

Enter the PIN to unblock the channel.

STEP 5

You are successfully unlocked the channel when this screen appears.

Kindly refer to the steps below to log in:

STEP 1

Click on the Disney+ app logo under the Apps rail on your Home page

STEP 2

Select Log In

STEP 3

Scan the QR code or visit the website on screen to log in

STEP 4

Key in the on-screen code to pair your TV

STEP 5

Enter your email address or mobile number associated with your Disney+ subscription

STEP 6

Select whether you want your OTP to be sent to your email address or mobile number

STEP 7

Key in your OTP

STEP 8

Review and agree to the Disney+ terms

Only applicable to first time log in to Disney+ after the app migration

STEP 9

Create your user profiles

Only applicable to first time log in to Disney+ after the app migration

STEP 10

Select your user profile on your TV screen to start watching

My Astro is an easy-to-use, free mobile phone app and responsive web portal that helps Astro customers to manage their Astro accounts. My Astro app allows customers to manage their accounts, pay bills, and get any support they need. In addition, customers can find and purchase the latest shows to be viewed on their Astro Box or on Astro GO. Customers can also receive news about Astro's latest products and content offerings.

Download My Astro app or visit the My Astro website.

We would need you to run few tests in order for us to understand your issue and to assist you in fixing the problem.

You may proceed with the troubleshooting steps below which should not require any longer than 15 minutes.

1. Please run each of the tests according to your your Laptop/PC Software.
2. Compile the pictures / screenshots of your test results in one file (i.e Microsof Word document, PDF file) and attach them in the Support Ticket below in order for us to assist you further:
   • List of websites effected.
   • Run the Speed Test via LAN (cable) and Wi-Fi connection - Please click here for Speed Test guideline.
   • Run the Traceroute Test - Please click here for Traceroute Test guideline.
   • Run the Ping Test - Please click here for Ping Test guideline.
3. Once you/ve gathered all the results, kindly send them all through the Feedback Form below.

Quick Info
A Speedtest is a service that provides free analysis of Internet access parameters, such as connection data rate.
A Ping Test shows how long it takes for packets to reach host.
A Traceroute Test traces the route of packets to destination host from our server.

1. Download the My Astro app or My Astro web
2. Login using your Astro ID
3. Go to Account > Bills

Tap on "Bill Statement' to view any bill statement up to twelve (12) months.

💳 Want to manage your Astro bills easily?

📱 Download the My Astro app to:
- View and download bill statements
- Check payment history
- Pay in just a few taps

Download the iQIYI app > Select "Profile" > Click on "Log in with Astro ID" > Click on "Do not have an Astro ID? Click here".

Huawei K562e

1. Please connect your computer or laptop to your Astro Fibre router using LAN cable. Your LAN cable must be connected from the yellow port of Astro Fibre router (Any available port).

2. Once connected, open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox and etc.

3. On the address bar, type http://192.168.100.254 and below page will appear.

Login using your username and password if you have changed the router login setting. Otherwise, your default router login is as per below.

Username: user

Password: user

4. Once you have successfully logged in, the router's web-based setup page will appear.

5. At the top of the page, click More to configure the WiFi parameters.

6. From the left menu, select WLAN and choose Wi-FI Advanced Network to access the screen below.

7. To change the channel on 2.4 GHz and 5 GHz, click the drop-down arrow for Channel, then select your desired channel.

8. Then, click "Apply" for the changes to take place.

You will not be able to switch between channels, use the app as a remote control, view favorite channels and programmes, use programme showtime reminder, and remote record feature.

No. There will be no changes to your monthly subscription fee as part of the refreshed channel lineup. You will continue to enjoy your current pack at the same price, along with the new channels and content additions.

If you’re an HBO Pack add‑on customer, you’ll continue paying the same RRP amount (depending on your subscription plan – Standard/Premium). If you’re on a combo plan / 50% discounted offer, you’ll keep to the discounted price until the promo expires. After the expiry, you may continue to subscribe to the HBO Max app as an ala carte add‑on via Astro from RM24.90/month.

Viu is available on the Ultra/Ulti Box for Astro customers to enjoy, as well as www.viu.com and
the Viu mobile app. If you have yet to upgrade to our latest Ultra/Ulti Box, please reach out to us
via WhatsApp by typing “Hi” at 03-9543 3838.

Upon completion of the termination process, customer will receive one last closing bill stating the total amount due to Astro according to their billing option.

For customers who had opted to switch their billing option to e-bill or SMS bill, they will receive their final bill accordingly.

For customers who opted for paper bill, they will receive the final bill via paper bill. (The Paper Bill Charge will be applied).

You will be charged 8% Service Tax on Astro Pay TV services rendered on or after 1st March 2024, whereas your Astro Fibre including Mesh will remain at 6% Service Tax.

STEP 1
Check the Audio settings on your box and set to Auto.
Refer guide to change Set HDMI Audio.

STEP 2
If issue persist, check if there is any 3rd party device (sound system/hdmi splitter) connected between box and TV.

STEP 3
If using 3rd party devices, bypass/remove 3rd party device and make sure HDMI cable connected directly from box to TV.

STEP 4
If issue persist, connect to Live Agent via WhatsApp for help.

You may login to your My Astro App and go to Account then click on Subscription followed by Add-ons, below is the step-by-step guide. Here, under the Apps category, you will be able to see all the apps that are included in your current subscription plan. If you’re unable to find Prime Video, click on ‘Manage your add-ons' to add-on the app to your pack at RM25/month (tax included).

Step 1: Press on Account

Step 2: Press on Subscription

Step 3: Press on Add-ons

Step 4: Check on the Subscription list

STEP 1

Press "HOME" button on your remote control.

STEP 2

Navigate to Settings and press "OK".

STEP 3

Navigate to Display and press "OK".

STEP 4

Navigate to TV Settings and press "OK".

STEP 5

Navigate to Conversion for 4:3 Input Video, select your preferred selection and press “OK”.

STEP 6

Select Yes, continue and press "OK" to confirm on the changes.

Otherwise, select No, go back to cancel.