You will be charged 8% Service Tax on Astro Pay TV services rendered on or after 1st March 2024, whereas your Astro Fibre including Mesh will remain at 6% Service Tax.

There will be no installation fee for both Astro Box and Ultra Box. The Multiroom (second decoder) must be installed at the same registered address as your primary subscription.

Yes, if you terminate your existing Astro plan before the end of your contract period, an early termination fee will apply. This fee is calculated based on your subscribed package, remaining contract duration, and box type.

However, if you terminate your service after completing your contract period, no early termination fee will be charged.

You will receive an email within 45 minutes of payment made to let you know whether your advance payment is successful or not. If your payment has failed, you may call Astro's Contact Centre at 03-9543 3838 or wait for an Astro representative to be in contact with you within 2 working days to assist you with your order.

Yes, you can log in using the same email address or mobile number associated with your existing Disney+ subscription.

For customers that would like to subscribe to Multiroom with a box installation,

(i) customers on the old packages (example Family Pack, Starter Pack, Value Pack, Super Pack or Super Pack Plus) will have to subscribe to our new packages first by sending "Switch" to 03-9543 3838 via WhatsApp;

(ii) customers on the new Astro packages can subscribe by visiting product.astro.com.my/multiroom or WhatsApp "Hi" to 03-9543 3838.

1. Ensure power cable is connected tightly.

2. Try to use another power socket / power source to eliminate faulty power sockets/power sources which could cause the issue.

3. If the issue persists, submit your feedback form for further assistance.

No, your Viu app is accessible within Malaysia only.

For new Astro Fibre customers with the RG21 router, you will be guided to install the Astro Fibre App on your mobile device during the installation of the service. Alternatively, you may refer to the user guide here for self-installation.

1. Open/Download the My Astro app or visit My Astro web.

2. Login with your Astro ID.

3. Go to Account.

4. Under Billing, tap on Auto Debit.

5. Select 'Update expiry date'.

6. Key-in the expiry dates, then tap 'Save'.

7. A successful notification will be displayed.

Huawei K562e

Disabling band steering means that there will be two frequency bands available for the users - 2.4GHz and 5GHz.

Note: Band Steering is called Dual-band Combination in the router web interface.

1. Please connect your computer or laptop to your Astro Fibre router using LAN cable. Your LAN cable must be connected from the yellow port of Astro Fibre router (Any available port).
2. Once connected, open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox and etc.
3. On the address bar, type http://192.168.100.254 and below page will appear.

Login using your username and password if you have changed the router login setting. Otherwise, your default router login is as per below.

Username: user
Password: user

4. Once you have successfully logged in, the router's web-based setup page will appear.

5. At the top of the page, click Wi-Fi to configure the WiFi parameters.

6. Click on Dual-band Combination button to disable the Band Steering.

7. Set the Wi-Fi name and Wi-Fi Password for both 2.4GHz and 5GHz bands based on your preference. Then click "Apply" for the changes to take place.

8. Kindly ensure to reconnect your WiFi according your new WiFi name and password.

Kindly note that not all Astro & Broadband Devices are required to be returned. After service termination of your Astro & Broadband service, we will call you via your registered mobile number within 3 days to schedule a pickup appointment with our Astro agent if your device needs to be returned.

If you were not contacted within 3 working days to return your devices, you are required to discard your old Astro & Broadband devices only at registered collection centres for proper handling and management of e-waste in an environmentally sound manner. Click here to find a registered collection centre near you.

Frequently Asked Questions

1) I missed the pickup appointment; what do I do now?

You can reschedule the pick-up appointment by calling our agent directly.

2) Can I reschedule my pickup date?

Yes! You can call our agent back directly to reschedule the pickup date and time.

3) Do I have to pack my device(s) before handing it over to the Astro agent?

Our Astro agent will dismantle the devices for you. However, if your devices are already dismantled, please pack them in their original box/packaging if possible. If this option is not available to you, just hand the device(s) over to the Astro agent without any packaging. You will not be charged any fees if the original packaging has been damaged/lost.

4) Do I have to print anything or fill in any forms before handing my device(s) over to the Astro agent?

No, you do not have to prepare any documents before handing your device(s) over to the Astro agent! All you have to do is get your device(s)ready before the Astro agent arrives to ensure a smooth handover process.

5) I have the Astro & Broadband router and modem to return, however, the cable(s) that come with them are damaged/lost; will there be any penalty fees?

No, please return your old Astro & Broadband modem and its power supply unit (PSU). There will be no penalty fees if the cable is damaged or lost.

Recycle via Registered Collection Centres

For all recycling-related questions, please click here.

The Multiroom (Smart TV) will mirror the subscription entitlement as per your primary subscription. However, radio channels and 3rd party apps such as Netflix, Disney+ are not available for consumption via Multiroom (Smart TV).

Yes, the 6% Service Tax will be imposed for Astro Smartcard/SIM card replacement effective bill date 9

th

July 2024 onwards.

If you receive this error message while activating Astro Smart TV, please follow the steps below:

1. Ensure that you have entered the sign-in code exactly as displayed on your TV screen.

• The code must be exactly 8 characters long.
• Do not enter fewer or more than 8 characters.

2. Check the code carefully before submitting.

• The activation code can be entered in uppercase or lowercase.
• The code will be accepted with or without dashes (-), as long as the characters entered are correct.

3. If the issue persists

• Refresh the activation screen on your Smart TV to generate a new code and try again.

If you are still having issues, proceed to submit report via WhatsApp or Feedback Form.
This will help our support team investigate and assist you further.

Yes, customers will be charged 8% Service Tax on switching fee for any services rendered on or after 1st March 2024.

For customers with the Ultra or Ulti Box, you will be charged a fee of RM100 (not inclusive of Govt. tax) upon confirmation of lost Astro Box and Smart Card/SIM Card.

For lost Smart Card/SIM card only, you may be charged RM50 to obtain a replacement.

Once your 12-month contract period ends, you will continue to enjoy your Astro X3 Pack at the same monthly subscription fee as your per your initial plan, subject to Astro's prevailing terms and conditions and any future changes communicated in advance. There will be no price change upon contract expiry. Pricing is as outlined below.

Note: All prices quoted are excluding SST

Existing Netflix add-on customers will be notified prior to their next bill cycle via email.

You have the liberty to manage device connection on your own.

We would need you to run few tests in order for us to understand your issue and to assist you in fixing the problem.

You may proceed with the troubleshooting steps below which should not require any longer than 15 minutes.

1. Please run each of the tests according to your your Laptop/PC Software.
2. Compile the pictures / screenshots of your test results in one file (i.e Microsof Word document, PDF file) and attach them in the Support Ticket below in order for us to assist you further:
   • List of websites effected.
   • Run the Speed Test via LAN (cable) and Wi-Fi connection - Please click here for Speed Test guideline.
   • Run the Traceroute Test - Please click here for Traceroute Test guideline.
   • Run the Ping Test - Please click here for Ping Test guideline.
3. Once you/ve gathered all the results, kindly send them all through the Feedback Form below.

Quick Info
A Speedtest is a service that provides free analysis of Internet access parameters, such as connection data rate.
A Ping Test shows how long it takes for packets to reach host.
A Traceroute Test traces the route of packets to destination host from our server.

Yes, users can access the Simply South app from anywhere in the world, except for India.

Selected HBO Max content is limited to selected countries due to content rights restrictions. Hence you may not be able to view them in Malaysia.

No, Astro will cover all expenses related to returning the box.

Yes, the monthly subscription fee will be prorated into your Astro bill.

Please ensure that:

a. Your Astro subscription includes Disney+. You can verify this via My Astro app or web under Manage Subscription → Add-ons.

b. Your Disney+ subscription has been activated. You can check the activation status via My Astro app or web under Manage Subscription → Add-ons.

c. You are using the correct email address or mobile number associated with your Disney+ account.

If you continue to experience login issues, please WhatsApp or call Astro’s Customer Service at +603 9543 3838.

Starting 7 October 2026, Disney+ will transition to a new Disney+ app experience. Astro customers can continue enjoying Disney+ via Astro with no changes to their Disney+ subscription or monthly fee.

Customers who stream via Astro Ultra or Ulti Box will have the new app made available automatically, while customers who stream on personal devices will simply need to download the new Disney+ app to continue watching Disney+.

Existing customers can sign in using the same email address or mobile number associated with their existing Disney+ account.

For further information and support relating to the Disney+ app experience or app-related features, please visit the Disney+ Help Centre.

No, the eKYC verification process must be done by the individual themselves, using their MyKad and selfie in real-time.

Follow the steps below to access the TVBAnywhere+ app on your Ultra/Ulti box:

• Step 1: On the Home menu, go to the app rail and select TVBAnywhere+. A screen with Pair TVBAnywhere+ TV App and a QR code will appear.
• Step 2: Scan the QR code with your mobile device. This action will open the TVBAnywhere+ login page on your phone.
• Step 3: Click on the Astro logo from the partner picker list and login with your Astro ID.
• Step 4: The TVBAnywhere+ app will now launch. Select the ‘Me’ icon to open your profile.
• Step 5: Choose Pair with TV App on the profile page.
• Step 6: A pairing code will appear on your TV. Enter this code on your mobile device and click OK. The TV screen will refresh, and the TVBAnywhere+ homepage will appear.

STEP 1
Switch off the power for your box and make sure that the adapter's power light is off.

STEP 2
Locate the Smartcard at the front or right side and gently pull it out make sure that the adapter's power light is off.

STEP 3
Wipe the Smartcard's gold chip clean using a dry soft cloth.

STEP 4
Make sure the gold chip is facing upwards and reinsert it all the way in.

STEP 5
Switch on the power for your box and make sure that the adapter's power light is on. Please wait for 5 minutes.

STEP 6
Turn on your box. You should no longer be experiencing this problem.
If issue persist, please submit the issue in our Feedback Form and attach a picture of your General tab of the STB Diagnostics for assistance.

No, there will not be any fees if you change your current Asian Favourites selection to Viu
Premium. You may also switch between Asian Favourites options once every billing cycle.

If you are unable to log in to the Astro Smart TV app, please follow the steps below:

1. Verify Your Astro ID Credentials

• Ensure you are using the correct Astro ID (email address/mobile number) and password.
• If you have forgotten your password, reset it via the Astro login page.

2. Check Your Internet Connection

• Ensure your Smart TV is connected to the internet.
• Test your internet connection by opening another app on the TV.
• Restart your router and Smart TV if necessary.

3. Update the Astro App and TV Software

• Make sure the Astro app is updated to the latest version.
• Check that your Smart TV firmware/software is up to date.

4. Restart the App

• Close the Astro app completely.
• Reopen the app and try signing in again.

5. Reinstall the Astro App

• Uninstall the Astro app from your Smart TV.
• Download and install it again from your TV's app store.
• Attempt to log in once more.

If you are still unable to log in, proceed to submit report via WhatsApp or Feedback Form and provide:

• Smart TV brand and model
• Screenshot/photo of the error message
• Astro ID (email address used for login)
• Details of the troubleshooting steps already performed

This information will help the support team investigate and resolve the issue more quickly.

STEP 1

On your remote, press the HOME button and the home menu will be displayed on top of your screen.

STEP 2

Navigate to Settings.

STEP 3

Navigate to Standby Mode and press "OK".

STEP 4

Navigate to your preferred selection and press "OK".

STEP 5

Navigate to Save and press "OK" to confirm your selection.

1. Please standby computer/laptop to access to the internet and connection must be via LAN (cable) [Connect the LAN (cable) to the yellow port in Maxis Router and direct to computer/laptop].

2. You may open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox and etc.

3. On the address bar, please go to http://192.168.1.254 and below page will appear.

If below box appear, please enter required details:

USERNAME: Administrator

PASSWORD: (ACCESS KEY AT THE RGW STICKER)

(These are the defaults, if you have done previous configuration on your router the password may be different)

4. Once enter into the page "'TECHNICOLOR TG784N V3'', you may follow below steps to get the best wireless channel information.

A. Select "Home Network".

B. Click "WLAN: SSID" to proceed to next screen.

C. In order to get the best wireless channel, click "Wireless Scan" to scan available surroundings wireless Channel.

D. Please choose channel with lesser number of usage.

Example in below case, you may choose channel 4.

5. To configure wireless channel, please proceed with below steps.

A. Select "Home Network".

B. Click "WLAN: SSID" to proceed to next screen.

C. Then, click "Configure" to change the channel selection (automatic to manual) and other configuration option.

D. Please ensure below items:

i. WLAN Enable: Tick

ii. Interface Enable: Tick

iii. Change the Channel Selection to Manual

iv. Change the wireless Channel based on Step 4(D).

v. Once completed the selection, click the "Apply" button.

After termination of Astro subscription, customer will be given two options of returning the Astro Box and SIM Card. The options available are:

a. At-Home Collection:

- Peninsular Malaysia customers are required to self-pack their Ultra Box or Ulti Box and SIM Card into a Flyers Pack provided by the appointed courier agent during collection.

- East Malaysia customers may hand over the Ultra Box or Ulti Box and SIM Card directly to pur appointed technician during collection.

OR

b. Self Drop-off: Customers are required to self-pack their Ultra Box or Ulti Box and SIM Card into a box.

- Peninsular Malaysia customers may drop the parcel off at any City-Link branch.

Operation hours for our appointed courier partner:

City-Link

Monday - Friday: 8:30am - 6:00pm
Saturday: 8:30am - 1:30pm
Sunday & PH: OFF

- East Malaysia customers may drop the parcell at any City-Link Branches listed below:

Operation hours for our appointed courier partner:

City-Link

Monday - Friday: 8:30am - 6:00pm
Saturday: 8:30am - 1:30pm
Sunday & PH: OFF

Redemption should be done by the account holder. However, if the account holder is unavailable, immediate family members can make the redemption provided that the account holder has given them the permission to redeem using his account credentials.

1. Via Television

a) Ultra Box

• Press the “Home” button and scroll to “Settings” > “Wi-Fi/Ethernet” > “New Wi-Fi Connection”

• Allow the Ultra Box to scan the Wi-Fi networks available and subsequently choose your home Wi-Fi network > Enter your Wi-Fi password

• Once you are connected, your Home screen will now show “tabs” where you can now enjoy Video On Demand

• Choose the your favourites from “Movies”, “Kids” and more

2. Mobile/Portable devices

(a) Just head to the Google Play Store, Huawei App Gallery or Apple App Store here, search for “Astro GO” and download Astro GO on iOS and Android devices. Login to watch on demand and other ASTRO channels based on your subscription.

STEP 1

Press "HOME" button on your remote control.

STEP 2

Navigate to Settings and press "OK".

STEP 3

Navigate to Display and press "OK".

STEP 4

Navigate to TV Settings and press "OK".

STEP 5

Navigate to Conversion for 4:3 Input Video, select your preferred selection and press “OK”.

STEP 6

Select Yes, continue and press "OK" to confirm on the changes.

Otherwise, select No, go back to cancel.

The "coming soon" label on some streaming apps on your TV and the "Apps" page of Astro's website allows our customers to stay on top of new launches as they happen! Stay tuned for these upcoming streaming apps so you can access even more content that you love from across the world.

Yes, your complimentary access to the Sun NXT Lite app will continue even after upgrading to the Astro One Epic Pack.

Skyworth RG21

1. Please connect your computer or laptop to your Astro Fibre router using WiFi or LAN cable. Your LAN cable must be connected from the yellow port of Astro Fibre router (Any available port).

2. Once connected, open any web browser such as Google Chrome, Internet Explorer, Mozilla Firefox and etc.

3. On the address bar, type http://192.168.100.254 and below page will appear.

Login using your username and password if you have changed the router login setting. Otherwise, your default router login is as per below.

Username: user
Password: user

4. Once you have successfully logged in, the router's web-based setup page will appear.

5. At the top of the page, click WLAN to configure the WiFi parameters.

6. You may change the Primary SSID (WiFI Name) and the WPA Passphrase (WiFi Password) to follow your preferences for 2.4G Wi-Fi Settings, then click "Save & Apply" for the changes to take place.

Please reconnect to the new WiFi name with the new password once completed.

7. You may make the same changes for 5G Settings by change the Primary SSID (WiFI Name) and the WPA Passphrase (WiFi Password) to follow your preferences, then click "Save & Apply" for the changes to take place.

Please check if you are streaming on a supported device. Astro GO is only applicable within the supported platforms; mobile devices (phones and tablets) and web browsers.

If you are still having issues, proceed to submit report via WhatsApp or Feedback Form.

Astro ID and / or account deletion is permanent. Upon deletion, it will be unlinked from your TV subscription account and you will be logged out from all the associated Astro apps and / or services connected including the partner apps that you have logged in using the same Astro ID.

If you have any queries regarding Astro ID or would like to request for Astro ID account deletion, click on submit your request here, fill in the required details and our Astro representative will get back to you within 3 business days for security verification purposes.

STEP 1

On your remote, press the HOME button.

STEP 2

Navigate to SETTINGS icon and press "OK".

STEP 3

Navigate to Manage Satellite Frequency and press “OK”.

STEP 4

Choose to Update Satellite Frequency and press “OK”.

STEP 5

Choose "Confirm" to continue Satellite Frequency Update and press “OK”.

STEP 6

Satellite Frequency Update progress screen will be displayed.

The updates will take approximately 20 minutes.

STEP 7

The status will be displayed once update is complete.

The following Smart TV models are supported:
a) Samsung TV (2020 models and above) with Tizen OS 4.0+

b) LG TV (2020 models and above) with WebOS 4.0+

c) Android TV (Android 8.0 and above)
Please refer to the complete list of Android TV brands supported by the Astro Smart TV app below:

*Also supported on Google TV, Oppen, CAIXUN, Mecoo

Yes, you are eligible for the 2-month access. However, you will need to activate and link your amazon account. Please activate and access Amazon Prime as the insturfctions below.

Step 1: Visit https://product.astro.com.my/apps/primevideo and click on "Get or activate Prime Now" and log in using your Astro ID and follow the on-screen steps.

Step 2: Once redirected to the Prime Video app, sign in to your Amazon Prime account using mobile number or email address.

Step 3: Launch Prime Video from application rail on your Ultra Box/Ulti Box by clicking on “Red Button” in your remote.

Step 4: Click on the “Sign in” button.

Step 5: Pair your Ultra Box/Ulti Box by scanning the QR Code.

Step 6: Enter your credentials on either a mobile browser or open the Prime Video app on your mobile device, and then click "Allow".

Step 7: Enjoy!

No, you do not have to prepare any documents before handing your equipment over to the courier agent/installer! All you must do is get your equipment ready before the courier agent/installer arrives to ensure a smooth handover process.

No, you are still able to subscribe to iQIYI on your current Astro pack.

If you require any assistance with the app, you may:

1. Visit the WeTV official Facebook Page for more information: WeTV Malaysia - Home | Facebook; or

2. Drop the WeTV team a message via Facebook chat here

If you encounter any issues with your Astro billing and entitlement, you may contact our Customer Service by:

1. Submitting a feedback form here: www.astro.com.my/contactus/form; or

2. Reaching to us via WhatsApp by typing "Hi"at 03-9543 3838

You can opt in to e‑Invoicing via the My Astro website or the My Astro app by following the steps below. Depending on your profile, you may be asked to provide additional details. Please scroll down to review the information required before proceeding.

Via the My Astro website:

1. Log in using your Astro ID.
2. Click Bills, scroll down to e-Invoice, and toggle it on.
3. You may need to enter your information (scroll down for more info) and click Acknowledgement to confirm.

Via the My Astro app:

1. Log in using your Astro ID.
2. Tap your account number or the default profile icon at the top left.
3. Scroll down to the Billing section, select e-Invoice, and turn the toggle on.
4. You may need to enter your information (scroll down for more info) and click Acknowledgement to confirm.

Details you may be required to provide:

The information required depends on your customer profile.

Note: You may obtain your TIN from the MyTax Portal or visitthe nearest IRBM branch